Add One condition type as subtotal to another Condition type.

Dear SAP Gurus,
I would like to add a Condition type say ZFE (Freight Extra) to ZF00, as a sub condition,
Can we do it? if yes how.
Thanks in advance.
Rolson

In your Price Procedure
Step CndType Description From To     subtotal                                      AcctKey
100   ZF00                                                                                ERF
110   ZFEE                                                                                ERF
120                Total Freight 100 110      D (or whatever is available)

Similar Messages

Create a new condition type, which reference to another condition type

I have a condition type Z002, which is reference to another condition type Z001 (Z001 is always negative, I have set the condition limit from -0.01 to -99,999,999), but with opposite sign.
User need to maintain only condition record for condition type Z001.
e.g. value for Z001 is -100, then value for Z002 is 100.
I have set Z002 reference to condition type Z001, but how to setup so that they always have opposite sign?
Thanks.

Go to pricing procedure in t.code V/08. Against condition type Z002, maintain routine number 164 (Basis * -1)in the column Alternative formula for condition base value. If this routine is not available, you can develop one in t.code VOFM (you can get help from ABAP'er) with required logic and assign here.
Regards,

Is this possible to add one page under 2 tabs conditionally in Oracle 10g

Hello All,
Is this possible to add one page under 2 tabs conditionally.
Lets say i have created one page "Page 1" under "Tab 1". Now i want the same page to be displayed fom another tab also.i.e. from "Tab 2" from the same application.I want to avoid creating copy of this page.
Such that when i am in Tab 1 and going to this page ,the newly created page should show tab as Tab1.Similarly if i am going to Page 1 from Tab 2 ,the newly created page should show tab as Tab2.
What can i do for this.
Thanks
Swapna

Swapna,
For Tab1 and Tab2, set the 'tab page' as 1 under 'current for pages' while you edit the tabs. This would add page 1 under two tabs, tab1 and tab2.
Regards,
Hari

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

How to shift valuation class from one material type to another material type ?

I have came across following weird scenario:
We already created huge no.of materials of material type say ZABC with two valuation classes say 1100 and 1200(GL accounts for these VCs for different posting keys in OBYC settings are same). Account category reference for this material type is 0010.
After that we created new material type say ZPQR with new Account category reference 0025, and valuation class 1200 is linked with this ACR 0025. Because of this, valuation class 1200 disappeared from material type ZABC. In order to avoid inconsistency, we need to have valuation class 1200 linked with older material type i.e.ZABC.How we can do this ? What impacts must have happened in this period (from MM/FI) in the system, where valuation class get shifted from one material type(ZABC) to another material type(ZPQR)....please help us in this scenario.

Thanks Sana,
We are also looking for the solution provided by you i.e. reassign ACR 0010 to Valuation class 1200.
Your are also correct in terms of statement "config doesnt allow me to assign same valuation class to 2 different AREF (Account reference number/Account category reference).
I wanted to know, what are the possible impacts in the system during this re-assignment of ACR to old material type ZABC.
Regards,
Sudarshan.

How to add one item when another item get added into the iProcurement Cart

Hi,
Please help me to do the following customization in iProcurement Cart:
Requirement-1:
1. Login to iProcurement and add one Item ITEM1 to Cart.
2. Make another Item ITEM2 mandatory or get added automatically when Item ITEM1 gets added into the iProcurement Cart
OR
Requirement-2:
1. Login to iProcurement and add one Item ITEM1 to Cart.
2. Go to Cart and click Checkout.
3. While checking out Item ITEM1, we need some validation to make another Item ITEM2 mandatory or get added automatically with Item ITEM1.
Thanks in Advance,
SB

Hi tiff512:
The way is:
SAP NetWeaver > General Settings > Check Units of Measurement.
The help documentation says the following in relation to the creation of new units of measure:
"If required, define new units of measurement according to the international system of units (SI) with the menu function Unit of meaurement -> Create.
Here you have to make make specifications for:
Display (including a descriptive Units of measurement text)
Conversion (not applicable to units of measurement without dimensions)
Data exchange (EDI) (optional)
Application parameters"
I hope it is helpful to you.
Regards,
David

I am unable to add contacts with their phone numbers. I add one press done and then it shows up but when I add another one the first one is deleted. How can I add them and make sure they stay. Upper left hand corner there is partial circle w/ arrow

I Unable to add contacts. I add one and then press done. It shows up but after I add another one the first one is gone. How do I save them?

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

When using more than one tab, once I have opened a pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the pdf into it's own window?

when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.

I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?

Hi Experts,
Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?
I want to do it with out using a multiprovider or virtual cube.
The scenario is ,
I have two cubes -Z_XXX;Z_YYY
Now Based on the client's requirement,(i.e. a report development) I can get all the chracteristics and key figures from cube Z_XXX except one key figure.
Now that keyfigure is available in the other cube (Z_YYY).
Now I want to add this particular characteristic in this Z_XXX cube & I don't want to use multiprovider or something like that.
Please help me.

HI Sumit,
Please find the link containg all details :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00ddebe-cc48-2b10-758a-8008e63d6826?QuickLink=index&…
Also , in case it is an attribute of existing characteristic, make it navigational and it will be avaible in Cube, just check the check box for same.
Thanks and Regards,
Amit.

Copy value of condition type to another condition type *Not Percentage*

Hi SAP community!
How can I copy the value of a condition type to another condition type in my pricing procedure? The rules are that these conditions are not Percentage. The calculation type is Quantity for the two conditions.
I want to copy the value of condition type PMIN (Minimum Price) to another Z condition type.
Thank you all

Hi Lakshmipathi;
In fact, there are two Z conditions that I need to have with the same value of the PMIN. I 've maintained my pricing procedure this way:
For the PMIN, the step is 320
For the ZPV1, the step is 920 and I put in "From " field 320 and in the "To" field 320
For the ZPV0, the steo is 925 and I put in "From " field 320 and in the "To" field 320
But when I looked the Conditions Tab in the sales order there is no value copied to the Z conditions.
In order to do this, my Z conditions do not need an access sequence assigned, right?

I use browsec but today this add one filtered in Iran. could you please another add one like this?

i need a add one like browsec. because browsec filtered in Iran and dont work.

Your request does not give any real information. Please describe fully
what you need. If you have trouble with English, use your own language.

Pricing Condition type triggering based on other condition type

Hello sir,
There are some pricing condition types in our system.
Based on condition records you can trigger one condition type based on other    condition type.
For eg: PR00 condition type is there and amount is suppose 1000rs and other condition type is JBED and we made a condition record and put it some percentage so as soon as we some value in PR00 ,JBED condition type is automatically manipulating the value on the base condition record.
Now i want other than condition record can we trigger one condition type based on other condition type through defining user routine under requirement.
Suppose we have condition type ABC and some amount i have given and other condition type DEF , i want that amount of DEF condition type should automatically come from the Condition type and it should manipulate according to my routine .
eg Condition type    Amount
       ABC                  1000
       DEF                    40
The value 40 should come as 4% of 1000.
I am not maintaing any condition record and i want that this should trigger through some requirement created by me.
i created my routine no 905 and i putted the code inside it.
if komtl-kschl = 'DEF'.
komv-kbetr =   ( komv-kbetr * 4) / 100.
endif.
Now problem is that this code is getting trigger when i m giving value in DEF condition type then it is showing 4 % of it.
But i want as soon as i give value for the condition type ABC and some value 1000
then after pressing enter , one condition type DEF should automatically come with value 40 that too in display mode ,not in change mode.
Please suggestions and solutions regarding this matter , I will be grateful to you.
Manish

hi
In V/06 in the calculation type you can see the entries for "D-gross weight" & "E-net weight"
For the required condition type select the calculation type as gross weight or net weight. Save it.
In MM01 - create material master, here in BASIC DATA 1 SCREEN you have fields for gross weight & net weight.
Maintain the condition record in VK11 for the required condition type.
You can also maintain the scales as required like u said
1 to 10 kgs - 100 rupees,
11 to 25 kgs - 1000 rupees.
Another way could be
The BEST practice to do it is, use of VOFM routine for price calculation (VOFM-->Formulae).
Take help from ABAPer and write a routine such that
if weight = 1 - 10
price = 100.
else if weight > 8.
price = 1000.
else
price = 100.
end if
but the maintainnance of routine is big problem as u might be having many records
Hope this will help you
Vishal

Best way to do a Object which holds a collection of another object type.

I'm writing a caching object to store another object. The cache is only valid for a session, so I want a store the data in a nested table.
I have try to simplify my example down to its core.
How do I make this work and what is the best to index the index the items stored for fastest retrieval.
CREATE OR REPLACE TYPE ty_item AS OBJECT (
id_object VARCHAR2 (18),
ORDER MEMBER FUNCTION compare (other ty_item)
RETURN INTEGER
CREATE OR REPLACE TYPE BODY ty_item
AS
ORDER MEMBER FUNCTION compare (other ty_item)
RETURN INTEGER
IS
BEGIN
IF SELF.id_object < other.id_object
THEN
RETURN -1;
ELSIF SELF.id_object > other.id_object
THEN
RETURN 1;
ELSE
RETURN 0;
END IF;
END;
END;
CREATE OR REPLACE TYPE ty_item_store AS TABLE OF ty_item;
CREATE OR REPLACE TYPE ty_item_holder AS OBJECT (
CACHE ty_item_store,
MEMBER FUNCTION get (p_id_object IN VARCHAR2)
RETURN REF ty_item,
MEMBER FUNCTION find (p_id_object IN VARCHAR2)
RETURN REF ty_item,
MEMBER FUNCTION ADD (p_id_object IN VARCHAR2)
RETURN REF ty_item
CREATE OR REPLACE TYPE BODY ty_item_holder
AS
MEMBER FUNCTION get (p_id_object IN VARCHAR2)
RETURN REF ty_item
IS
rtn REF ty_item;
BEGIN
rtn := find (p_id_object);
IF rtn IS NULL
THEN
rtn := ADD (p_id_object);
END IF;
RETURN rtn;
END;
MEMBER FUNCTION find (p_id_object IN VARCHAR2)
RETURN REF ty_item
IS
rtn ty_item;
BEGIN
SELECT VALUE (ch)
INTO rtn
FROM CACHE ch
WHERE ch.id_object = p_id_object;
RETURN rtn;
END;
MEMBER FUNCTION ADD (p_id_object IN VARCHAR2)
RETURN REF ty_item
IS
item ty_item;
BEGIN
item := ty_item (p_id_object);
INSERT INTO CACHE
VALUES (item);
END;
END;
/

Best way to do a Object which holds a collection of another object type. The best place for data in a database is.. no real surprise.. in tables. If that data is temporary of nature, global temporary tables cater for that.
Storing/caching data using PL/SQL requires very expensive private process memory (PGA) from the server. This does not scale.
I'm writing a caching object to store another object. Irrespective of how l33t your haxor skillz are, you will not be able to code as a sophisticated, performant and scalable PL/SQL data cache, as what already exists (as the database buffer cache) in Oracle.
The cache is only valid for a session, so I want a store the data in a nested table.Not sure how you take one (session local data) to mean the other (oh, let's use a nested table).
Session local data can be done using PL/SQL static variables. Can be done using name-value pairs residing in a context (Oracle namespace). Can be done using a global temporary table.
The choice is dependent on the requirements that need to be addressed. However, the term +"caching+" has very specific connotations that say that a global temporary table is likely the best suited candidate.

11g dashboard prompt - anyway to add an action to apply to open another tab

I have a requirement to show the prompt for a particular dashboard on one tab and the reports on another. Is there anyway to add an action to the apply button so it applies the filter and opens another tab?
Thanks

Hi,
Use the Action Link
ie Add Action link to your dashboard page which is placed with in the prompt and
goto Properties of Action Link -> Type your report name in Link Text -> New Action - Navigate to BI Content and browse the Report -> click OK.
Note: Don't forget to give the filter option - is prompted in your report.
Thanks,
Balaa...

Add One condition type as subtotal to another Condition type.

Similar Messages

Maybe you are looking for