"Add Operating System Installer Wizard" Throws Error When Adding OS's

Good Afternoon All -
Okay - I just installed SCCM 2012 in our production environment - whoo hoo!
Going through the initial setup and configuration, I had a few errors that I had to take care of, but was able to figure out what caused them OR just uninstall / reinstall them fixed it. I've got a new issue I can't figure out, though.
On my SCCM 2012 Primary Site Server, I created a folder named Images and shared it to my SCCMAdmin account (full) and SCCM Admin group (full). Inside of it, I created sub folders for each of the OS's that I want to have installers for. For now,
I am working with Windows 7 Professional SP1 x64.
In the console (signed in as SCCMAdmin), I go to Software library, then Add Operating System Installer Wizard. I type in the UNC path going to shared folder, then sub folder holding the ISO file and click Next. I then get an error saying
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path."
Perhaps I'm doing something wrong, but here's what I've tried to fix it so far...
- Tried pointing it to a folder with the ISO's contents extracted as well as to the Sources folder
- Downloaded the ISO from TechNet so that I know it was fresh - nogo
- Tried adding a Windows 8 ISO I had laying around - nogo
- Checked folder share permissions as well as security ones. I even gave Everyone full access - nogo
- Checked SCCM component and site status - green across the board.
Any ideas? - Thanks!
Ben K.

Sorry to bring up a relatively old post, but wanted to relay my experience with this same problem. In my case, I knew all permissions were correct, but I received the same error message. Turns out the problem was that I had only copied the
install.wim file to my Images directory. I then directed SCCM to the Images directory and got the error message. The reason for the error was that SCCM is looking for the folder structure that is on the DVD, namely, the "sources" directory.
By the time I figured this out, I had already copied the entire "sources" directory to the root of my Images directory. I moved all of these files under the Images\Sources directory and went ahead and copied the rest of the DVD to the Images directory.
After doing that, I was able to complete the wizard as expected. Hope that helps someone to not have to waste the same 2 hours that I just did. :)

Similar Messages

BDD 2007 -- ZTI -- OSD error "The Operating System Installation Failed Unspecified Error (80004005)

Hi there
Wonder if anyone can advise me on a BDD 2007 OS deployment issue? (Apologies if this is in the wrong forum, I couldn't see a forum for BDD 2007.)
First of all, this BDD 2007 server and the OSD config was not done by me. For info, it is part of a SMS 2003 infrastructure.
I am trying to get the XP Pro build process working. I am led to believe the config has been completed.
Unfortunately, after booting the pc from the nic, I get an error. This is the order:
- the 'Initializing Windows PE' splash appears for perhaps 15 seconds
- very briefly, the text changes to 'Initializing Network'
- for a second or two only 'Initializing Windows PE' appears again
- then this error message appears:
"SMS Operating System Deployment - The Operating System Installation failed. Please contact your system administrator for assistance. Unspecified Error (80004005)"
I've spent some time looking into this error (80004005) and from what I can gather it possibly means 'access denied'.
I'm assuming after Windows PE loads the first Task Sequence begins, and if this possibly is where the issue lies?
One thing I cannot understand - the first Task Sequence (Initialization) has this command line (as do most, with different .wsf file):
cscript.exe "%SCRIPTROOT%\ZTIGather.wsf" /localonly
However, I cannot access %SCRIPTROOT% at all, Windows says it can't find it. I can run other variables such as %USERPROFILE%, %SYSTEMROOT%, etc, but cannot open %SCRIPTROOT%.
Is it simply the case that I should create a new system variable (that has not been created by whoever built the server)?
Thanks
John Henry

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

TableAdapter Configuration Wizard gives error when adding new TableAdapter

Hi,
I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
Scenario 1:
From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
Configure TableAdapter TABLENAME failed.
Index was outside the bounds of the array.
Scenario 2:
From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to merge object(s).
Index was outside the bounds of the array.
Scenario 3:
On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to add TableAdapter.
Index was outside the bounds of the array.
Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
Thanks,
Jim

Sorry let me clarify some of the config a little more.
MAIL101 - Exch 2013
MAIL102 - Exch 2013
AP104 - Witness (strictly a witness nothing else on this machine)
EDGE01 - Exch 2007 Edge
CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
CAS02 - Exch 2007 Hub/CAS
CAS03 - Exch 2007 Hub/CAS
MBOX01 - Exch 2007 Mail cluster
MBOX02 - Exch 2007 Mail cluster node
MBOX03 - Exch 2007 Mail cluster node
RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
All DCs are Global Catalogs.
I can ping all DCs and root DCs fromboth MAIL101 and 102
The Exchange Replication service is running on both MAIL101 and 102.
DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
DCDIAG comes back with all tests passed.
repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed. No errors.

Receive: "Add Profile Failure: Invalid Profile XML" error when adding WWAN profile - Windows 7

I'm trying to import below XML profile to Windows 7 machine and no matter what profile i use (even the one it was on that computer originally it gives me an error.
Command:
netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
test.xml is in c:\temp folder.
<MBNProfile xmlns="http://www.microsoft.com/networking/WWAN/profile/v1">
<Name>TestProfile</Name>
<IsDefault>true</IsDefault>
<ProfileCreationType>UserProvisioned</ProfileCreationType>
<SubscriberID>01.........................00000</SubscriberID>
<SimIccID>89480............9713302</SimIccID>
<HomeProviderName>02</HomeProviderName>
<AutoConnectOnInternet>true</AutoConnectOnInternet>
<ConnectionMode>manual</ConnectionMode>
<Context>
<AccessString>Internet</AccessString>
<Compression>DISABLE</Compression>
<AuthProtocol>NONE</AuthProtocol>
</Context>
</MBNProfile>
Tried these steps:
- configured the setting using UI and test connection - it worked.
- copied that profile from path: C:\ProgramData\Microsoft\WwanSvc\Profiles to
c:\temp and renamed it to test.xml
- closed the connection and run command: netsh mbn delete profile interface="Mobile Broadband Connection" name=TestProfile
- and then tried to add the profile under changed name (no profile changes made): netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
- received very nice message: Add Profile Failure: Invalid Profile XML
I'm stuck, help?

Hey,
Got an answer. It required some debugging, but I end up finding it.
When you add that profile, system executes a function which compares Subscription ID tag with the one it has in system already. If one is already there then overwrites the profile, if NULL adds the profile. Problem is, as soon as any of
the profiles are configured manually to redistribute later, the Subscription ID tag is encoded. And window doesn't know how to decode it, so it fires an error.
The Subscription tag is an IMSI number, when you right click it on your connection and go to properties, you will see it there, 15 digits. Copy it and paste it to the XML file replacing encoded number.
It works as a charm.
I leave deployment methods to you... :)
Not so happy to answer my own question, but what a heck... glad to help even one person :)

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. Any advice would be greatly appreciated.

I cannot transfer my Ical on my Imac with Mavericks 10.9.2 to my iphone 4 with the latest operating system. I get error message "403" when it attempts to upload to the cloud before transfering to the iphone. I've tried shutting down the computer and iphone but it has not been successful. There is plenty of data available on the icloud as I've not used it for anything else. Any advice would be greatly appreciated. Thank you.
Kevin

Hello kmcnern3,
Thank you for providing the details of the calendar issue you are experiencing with your iMac and iPhone. I recommend following the steps in the section titled "Troubleshooting on OS X" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows server 2012 Datacenter Hyper-V Cluster -- Failed to validate Operating System Installation Option?

Hi I have a 4 node Windows server 2012 Hyper-V cluster. When I try to run a cluster validation report, everything else is fine but it fails at validate the Operating System Installation Option step. I did some research but couldn't really find any solution.
Anyone knows how to pass this test? Thanks.
Here's the error I get when run the test:
An error occurred while executing the test.
The operation has failed. An error occurred while getting the operating system installation option for node "server1"

Hi JasonLiu2002,
Please post the original error information, the current information is so wide that difficult to determine where may have issue and please offer more information about your
server configuration, you can refer the following article to prepare your cluster environment first.
Windows Server 2012 Hyper-V Best Practices (In Easy Checklist Form)
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
When you preparing the new cluster on Server 2012 please install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters updates.
http://support.microsoft.com/kb/2784261
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to add operation system user in atable

oracle 10g and Oracle Enterprise Linux 5.4
i wouil like to add operation system user name in a oracle table so that i can monitor data in the particular table

Your question is unclear.
Check also v$session dynamic performance view may be you can get information from this view which you can pull into your custom table.
And your query is about finding who is connected then,
To know about the list of users that is now connected and the time when they connect to database issue the following query.
SQL> SELECT s.username, s.program, s.logon_time
FROM v$session s, v$process p, sys.v_$sess_io si
WHERE s.paddr = p.addr(+)
AND si.sid(+) = s.sid
AND s.type = 'USER';
USERNAME PROGRAM LOGON_TIM
SAMI sqlplus@testerp (TNS V1-V3) 26-NOV-10
oracle@testerp (J000) 26-NOV-10
To know only the current session user name you can issue the following query,
SQL> SELECT USERNAME from v$session where audsid = sys_context('userenv','sessionid');
USERNAME
SAMI
To know about on which schema you are connecting issue following query.
SQL> SELECT sys_context('USERENV', 'CURRENT_SCHEMA') FROM dual;
SYS_CONTEXT('USERENV','CURRENT_SCHEMA')
SAMI
To know about the connected user user for the current session issue,
SQL> SELECT sys_context('USERENV', 'SESSION_USER') FROM dual;
SYS_CONTEXT('USERENV','SESSION_USER')
SAMI
If you use SQL*plus then simply issue,
SQL> SHOW USER;
USER is "SAMI"

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Updated my iphone 4 today to new operating system...said error 50 and i lost all my previous data...there is no back up to get my contacts and photos back although it did say it was backing up first before it installed the new operating system but

updated my iphone 4 today to new operating system...said error 50 and i lost all my previous data...there is no back up to get my contacts and photos back although it did say it was backing up first before it installed the new operating system but i cant find it anywhere...so frustrated at losing everything

http://support.apple.com/kb/TS3694#error50

I want to buy a 21.5" new imac shortly. Will I be able to have a free update of the operating system to OS 10.9 when it arrives later this month

I want to buy a 21.5" new imac shortly. Will I be able to have a free update of the operating system to OS 10.9 when it arrives later this month?

Unfortunately there is no one here that can give you an answer; we are just users like yourself.
But based on past experience it has been known for free upgrades to be offered ... but not before the new OS is formally announced. There have been several references of late to the imminent launch of Mavericks. I think you can do no more than wait for the announcement.

[Windows] file.url throw error when application executable in root directory

Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.

I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

System log shows operating system call recv failed(error no.73)

hi all,
here i have some doubt in system log please clarify me,
here in my (sm21)system log files i find more no of logs for dispatcher and it indicates operating system call recv failed(error no.73)
system log Short Text shows:
Operating system call &5&5&4 failed (error no. &>E5)
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors are network problems.
It could also be a configuration problem at operating system level. (file cannot be opened, no space in the file system etc.).
what is means

Hello,
Yes, you are right, these kind of problems (OS Error 73) are usually caused by network issues. Error 73 means 'connection reset by peer'. In most cases, this is because the connection was interupted by the communication partner or an active network component between.
I provide you some recommendations:
- Check your Network environment. You can use NIPING tool to diagnose it (note 500235), check your MTU stability.
- Check note 27320 - keep alive and gui_auto_logout profile param
- Also you can implement note 1002075 for a possible solution
I hope this helps you.
Regards,
Blanca

[svn:fx-trunk] 10891: Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants

Revision: 10891
Author:   [email protected]
Date:     2009-10-06 09:46:47 -0700 (Tue, 06 Oct 2009)
Log Message:
Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants
QE notes: None.
Doc notes: None
Bugs: SDK-22676
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22676
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java

Have you tried using com.adobe.air.crypto.EncryptionKeyGenerator instead?

"Add Operating System Installer Wizard" Throws Error When Adding OS's

Similar Messages

Maybe you are looking for