Add other samples in the SAME templates?

Hello to everyone in community,
I am pondering about the other templates in page 09, but disappeared in 13.
In page 09, if you chose template of "Visual Paper", when u insert the next page,
you will have other samples of the "Visual Paper", which u can chose what you want next page.
But 13, Pages, looks like they don't have this item.
In keynote, they still have,
Like if you chose "Photo Essay",
When U want to add new slide,
U find find many samples of next slide in "insert" bottom.
Thank you for helping me the solution to the new IWork, appreciated!

Feature gone along with over 100 others.
Keep using Pages '09, it's as good as its ever going to be.
Peter

Similar Messages

How to create a linked data source with document libraries based on the same template?

I use SharePoint Foundation 2013, SP Designer and Visual Studio 2013 to my needs. But there are several things which i don't get.
I have a number of libraries which use the same template. I want to create a linked data source, that would contain them all, and if I add a library based on this template, the library would be added to the data sorce. Is it possible?
I tried creating linked data souces, but the view that it brings by default is limited(no sorting, etc.). How can it be modified?

I am planning to do my project on Linux with J2EE,Oracle technologies.You don't need to set up a DSN. Just use a JDBC connect string such as jdbc:oracle:thin:@localhost:1521:xe
~Jer

Is there a way to add two windows in the same window?

is there a way to add two windows in the same window?

what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

Querying on a value and using that to pull other data in the same query

I am having some issues pulling the correct data in a query. There is a table that houses application decision data that has a certain decision code in it, WA, for a particular population of applicants. These applicants also may have other records in the same table with different decision codes. Some applicants do NOT have WA as a decision code at all. What I need to do is pull anyone whose maximum sequence number in the table is associated with the WA decision code, then list all other decision codes that are also associated with the same applicant. These do not necessarily need pivoted, so long as I can pull all the records for a person whose highest sequence number is associated with WA and all of the other decision codes for that applicant for the same term code and application number also appear as rows in the output.
I do not have the rights in Oracle to create tables, so please pardon if this code to make the table is incorrect or doesn't show up here as code. This is not the entire SARAPPD table framework, just the pertinent columns, along with some data to put in them.
DROP TABLE SARAPPD;
CREATE TABLE SARAPPD
(PIDM              NUMBER(8),
TERM_CODE_ENTRY   VARCHAR2(6 CHAR),
APDC_CODE         VARCHAR2(2 CHAR),
APPL_NO        NUMBER(2),
SEQ_NO             NUMBER(2));
INSERT INTO SARAPPD VALUES (12345,'201280','WA',1,4);
INSERT INTO SARAPPD VALUES (12345,'201280','RE',1,3);
INSERT INTO SARAPPD VALUES (12345,'201280','AC',1,2);
INSERT INTO SARAPPD VALUES (23456,'201280','RE',1,2);
INSERT INTO SARAPPD VALUES (23456,'201280','WA',1,3);
INSERT INTO SARAPPD VALUES (23456,'201280','SC',1,1);
INSERT INTO SARAPPD VALUES (34567,'201280','AC',1,1);
INSERT INTO SARAPPD VALUES (45678,'201210','AC',2,1);
INSERT INTO SARAPPD VALUES (45678,'201280','AC',1,2);
INSERT INTO SARAPPD VALUES (45678,'201280','WA',1,3);
INSERT INTO SARAPPD VALUES (56789,'201210','SC',1,2);
INSERT INTO SARAPPD VALUES (56789,'201210','WA',1,3);
COMMIT;I have attempted to get the data with a query similar to the following:
WITH CURR_ADMIT AS
      SELECT   C.SEQ_NO "CURR_ADMIT_SEQ_NO",
                        C.PIDM "CURR_ADMIT_PIDM",
                        C.TERM_CODE_ENTRY "CURR_ADMIT_TERM",
                        C.APDC_CODE "CURR_ADMIT_APDC",
                        C.APPL_NO "CURR_ADMIT_APPNO"
                          FROM SARAPPD C
                          WHERE C.TERM_CODE_ENTRY IN ('201210','201280')
                          AND C.APDC_CODE='WA'
                         AND C.SEQ_NO=(select MAX(d.seq_no)
                                               FROM   sarappd d
                                               WHERE   d.pidm = C.pidm
                                               AND d.term_code_entry = C._term_code_entry)
select sarappd.pidm,
       sarappd.term_code_entry,
       sarappd.apdc_code,
       curr_admit.CURR_ADMIT_SEQ_NO,
       sarappd.appl_no,
       sarappd.seq_no
from sarappd,curr_admit
WHERE sarappd.pidm=curr_admit.PIDM
and sarappd.term_code_entry=curr_admit.TERM_CODE_ENTRY
AND sarappd.appl_no=curr_admit.APPL_NOIt pulls the people who have WA decision codes, but does not include any other records if there are other decision codes. I have gone into the user front end of the database and verified the information. What is in the output is correct, but it doesn't have other decision codes for that person for the same term and application number.
Thanks in advance for any assistance that you might be able to provide. I am doing the best I can to describe what I need.
Michelle Craig
Data Coordinator
Admissions Operations and Transfer Systems
Kent State University

Hi, Michelle,
903509 wrote:
I do not have the rights in Oracle to create tables, so please pardon if this code to make the table is incorrect or doesn't show up here as code. This is not the entire SARAPPD table framework, just the pertinent columns, along with some data to put in them. You really ought to get the necessary privileges, in a schema that doesn't have the power to do much harm, in a development database. If you're expected to develop code, you need to be able to fabricate test data.
Until you get those privileges, you can post sample data in the form of a WITH clause, like this:
WITH     sarappd    AS
     SELECT 12345 AS pidm, '201280' AS term_code_entry, 'WA' AS apdc_code , 1 AS appl_no, 4 AS seq_no     FROM dual UNION ALL
     SELECT 12345,           '201280',                    'RE',               1,             3                 FROM dual UNION ALL
     SELECT 12345,           '201280',                  'AC',            1,          2               FROM dual UNION ALL
... I have attempted to get the data with a query similar to the following:
WITH CURR_ADMIT AS
      SELECT   C.SEQ_NO "CURR_ADMIT_SEQ_NO",
C.PIDM "CURR_ADMIT_PIDM",
C.TERM_CODE_ENTRY "CURR_ADMIT_TERM",
C.APDC_CODE "CURR_ADMIT_APDC",
C.APPL_NO "CURR_ADMIT_APPNO"
FROM SARAPPD C
WHERE C.TERM_CODE_ENTRY IN ('201210','201280')
AND C.APDC_CODE='WA'
AND C.SEQ_NO=(select MAX(d.seq_no)
FROM   sarappd d
WHERE   d.pidm = C.pidm
AND d.term_code_entry = C._term_code_entry)
Are you sure this is what you're actually running? There are errors. such as referencing a column called termcode_entry (starting with an underscore) at the end of the fragment above. Make sure what you post is accurate.
Here's one way to do what you requested
WITH     got_last_values AS
     SELECT sarappd.*     -- or list all the columns you want
     ,     FIRST_VALUE (seq_no)    OVER ( PARTITION BY pidm
                                    ORDER BY      seq_no     DESC
                              )           AS last_seq_no
     ,     FIRST_VALUE (apdc_code) OVER ( PARTITION BY pidm
                                    ORDER BY      seq_no     DESC
                              )           AS last_apdc_code
     FROM    sarappd
     WHERE     term_code_entry     IN ( '201210'
                       , '201280'
SELECT     pidm
,     term_code_entry
,     apdc_code
,     last_seq_no
,     appl_no
,     seq_no
FROM     got_last_values
WHERE     last_apdc_code     = 'WA'
;Don't forget to post the results you want from the sample data given.
This is the output I get from the sample data you posted:
`     PIDM TERM_C AP LAST_SEQ_NO    APPL_NO     SEQ_NO
     23456 201280 WA           3          1          3
     23456 201280 RE           3          1          2
     23456 201280 SC           3          1          1
     45678 201280 WA           3          1          3
     45678 201280 AC           3          1          2
     45678 201210 AC           3          2          1
     56789 201210 WA           3          1          3
     56789 201210 SC           3          1          2I assume that the combination (pidm, seq_no) is unique.
There's an analytic LAST_VALUE function as well as FIRST_VALUE. It's simpler (if less intuitive) to use FIRST_VALUE in this problem because of the default windowing in analytic functions that have an ORDER BY clause.

How do i share my itunes library with other users on the same mac

I'm trying to share my itunes library with other users on the same mac. I have tried moving my library to a public folder but when the other user logs in they can't see it in the public folder?

Presuming you moved the entire iTunes folder to the shared folder the other users need to start their iTunes while holding down the option/alt key and select the iTunes Library.itl file in the shared folder. Only once should be necessary. Note that any changes anybody makes will be seen by everybody, so you have to trust each other a lot.
If all you moved are media files each user will have to add those files to their iTunes library.
iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189 Chris CA's instructions on sharing one iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - Multiple users using a single library file - similar post at: https://discussions.apple.com/thread/3753008 Suggestion by Turingtest for multiple users and one library - http://discussions.apple.com/message/9117622 - use smart playlists and tags to isolate groupings.

How do I add a contact from the same company to my address book?

How do I add a contact from the same company to my address book? I do not want to re-type all of the information. Thanks for your help.

Any card in your address book can be duplicated. Select the card within the Name column, and use the Edit > Copy menu item followed by the Edit > Paste menu item. Then you can update the card copy and only change the name/email/phone fields as needed.

How do I sink calendars with other users on the same computer

How do I sink calender info with other users on the same computer?

Hi there,
First..I am new to this forum and find the information provided to be very helpful... I had followed the iTunes link above to enable sharing between users in the same computer but it appears to be working on partially. What setup am I looking for ?
1. We have an iMac (Snow Leopard) with 1 Adult ID and 2 children IDs
2. The iTunes music folder is stored in a Shared public folder where the Adult ID has read/write access and the 2 kids with read-only access (so that they don't accidently delete songs...:-)
3. The iTunes on the Adult ID has the access to purchase songs. The kids have no acccess to buy songs
4. All songs, podcasts to be visible to all users
What has happened ?
1. I am able to make the base of songs visible to all users
2. However when a song is purchased by the adult account ..it is not visible to the kids account ..:-{
3. The same thing occurs when a song is imported from a CD
4. When a new playlist is created by the Adult account it is not visible to the kids account ..:-(
How can I make changes made by the Adult be made visible to the kids without having the need to constant add music files or libraries for each kid..?
Thanks in advance..

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Add multiple scans to the same pdf file scan at time of scanning

Hello, HP Officejet Pro 6830 How do I get it to add multiple scans to the same pdf file? I need to scan multiple documents and have them all end up in one pdf. Some may be double-sided and it is fine if I have to scan them individually. At present it will only do one scan or a double-sided scan then it wants to save the scan and not ask if there are any more pages. The only option is to save or not. Thank you.

After your first scan you need to click the + sign at the 7 o'clock position.

How to Add 3 queries in the same work book?

Hi Gurus,
Can any one tell How to Add 3 queries in the same work book?
Example, daily report,Monhly and yearly reports for sales should be in the same workbook.
Please help me if any one have a pointer or a how to doc if available.
<<Text removed>>
Thanks
James
Edited by: Matt on Apr 26, 2010 9:36 AM

Hi James,
According to BI 7.0 Version
Steps of creating workbook and to insert more than one query in a workbook.
When you run a query and it opens in Bex Analyzer you can click the save button and pick "Save as Workbook".
Once you save it as a workbook Click on the "Design Mode" button in the Bex toolbar (looks like an A).
Click in the sheet where you want the new query to go, click the "Analysis Grid" button. It will add the analysis grid to your new sheet.
Right click on the Analysis grid and go to properties.
Click on button to change data provider and select the query you want to attach.
Exit design mode and you should be all set.

Can't download more than one iBook created with the same template

Hi,
I created 3 books in iBooks Author, using the same template. I uploaded these books to my server. I can dowload anyone of them to iPad, but when I try to download the second one, nothing happens: the first I downloaded is still there.
I changed the books name: nothing.
I used other template, 3 books: same problem.
When I created a bookwith other template, it's OK.
iBooks Author: 2.0 (327)
iBooks: 3.0.1 (1223)
iPad: iOS 5.1.1 (the problem also occurs in iOS 6
Mac OS X 10.7.5

this is a new issue.
try saving each book as a template before publishing.
change the new file names slightly and publish from each template file
hope this helps...

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

My colleague and I are working together (from separate MacBooks) to create an iBook for our students. We plan to work on sections separately and combine later. Must we use the SAME template to do so?

I'm not sure iBA reacts well to this type of editing, not to mention the cumbersome nature of trying to bring everything together in general.
I'd suggest a workflow where one book is handed off, instead. That, or, let the individuals involved create their basic content in Pages, then when ready, use iBA's Insert Pages Chapters menu to string them together. Best to work in a linear fashion and avoid adding/removing/adding/moving portions, etc.
If you must have separate authors, be sure to use the identical template and have them all properly trained up before going forward - trying this as a learning experience may result in an off-putting experience otherwise , with more time spent on chasing knots than on expressing writing skills, etc.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello... the airport (wifi) connection on my imac is oftenly "freeze" and need to reconnect again. Can everyone help to solve this problem? It's not happened to other computer on the same network in the same area (distance). Thanks a lot.

Hello,
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
If that doesn't work try changing channels on your Router.

Data of column datatype CLOB is moved to other columns of the same table

Hi all,
I have an issue with the tables having a CLOB datatype field.
When executing a simple query on a table with a column of type CLOB it returns error [POL-2403] value too large for column.
SQL> desc od_stock_nbcst_notes;
Name Null? Type
OD_STOCKID N NUMBER
NBC_SERVICETYPE N VARCHAR(40)
LANGUAGECODE N VARCHAR(8)
AU_USERIDINS Y NUMBER
INSERTDATE Y DATE
AU_USERIDUPD Y NUMBER
MODIFYDATE Y DATE
VERSION Y SMALLINT(4)
DBUSERINS Y VARCHAR(120)
DBUSERUPD Y VARCHAR(120)
TEXT Y CLOB(2000000000)
NBC_PROVIDERCODE N VARCHAR(40)
SQL> select * from od_stock_nbcst_notes;
[POL-2403] value too large for column
Checking deeply, some of the rows have got the data of the CLOB column moved in another column of the table.
When doing select length(nbc_providercode) the length is bigger than the datatype of the field (varchar(40)).
When doing substr(nbc_providercode,1,40) to see the content of the field, a portion of the Clob data is retrieved.
SQL> select max(length(nbc_providercode)) from od_stock_nbcst_notes;
MAX(LENGTH(NBC_PROVIDERCODE))
162
Choosing one random record, this is the stored information.
SQL> select length(nbc_providerCode), text from od_stock_nbcst_notes where length(nbc_providerCode)=52;
LENGTH(NBC_PROVIDERCODE) | TEXT
-------------------------+-----------
52 | poucos me
SQL> select nbc_providerCode from od_stock_nbcst_notes where length(nbc_providerCode)=52;
[POL-2403] value too large for column
SQL> select substr(nbc_providercode,1,40) from od_stock_nbcst_notes where length(nbc_providercode)=52 ;
SUBSTR(NBC_PROVIDERCODE
Aproveite e deixe o seu carro no parque
The content of the field is part of the content of the field text (datatype CLOB, containts an XML)!!!
The right content of the field must be 'MTS' (retrieved from Central DB).
The CLOB is being inserted into the Central DB, not into the Client ODB. Data is synchronized from CDB to ODB and the data is reaching the client in a wrong way.
The issue can be recreated all the time in the same DB, but between different users the "corrupted" records are different.
Any idea?

939569 wrote:
Hello,
I am using Oracle 11.2, I would like to use SQL to update one column based on values of other rows at the same table. Here are the details:
create table TB_test (myId number(4), crtTs date, updTs date);
insert into tb_test(1, to_date('20110101', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110201', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110301', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110901', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110902', 'yyyymmdd'), null);
After running the SQL, I would like have the following result:
1, 20110101, 20110201
1, 20110201, 20110301
1, 20110301, null
2, 20110901, 20110902
2, 20110902, null
Thanks for your suggestion.How do I ask a question on the forums?
SQL and PL/SQL FAQ

I am able to load some pages from a particular website while other pages from the same site give the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete."

I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.com

Suddenly from yesterday I am getting this error while trying to opening gmail

Add other samples in the SAME templates?

Similar Messages

Maybe you are looking for