Add our contact to ovi gps post office

Dear OVI
we are tnt global express iran branch want to add our contact in post office directory while ovi gps is loading tehran map
iam using nokia e72 . when i use my ovi gps every things is ferfect & also our resturant name was added in the directory but directory of post office is empty i want to know what we can do for adding our post office contact into your directory
PLZ help me
what can we do ???

This forum is probably a better place to ask: http://forums.adobe.com/community/general/adobedotcom_feedback
And/or this: http://forums.adobe.com/community/licensing

Similar Messages

Configuring Contacts (External Domain/Post Office/User)

We're starting a migration to another mail system. I'm looking for some help to properly configure our GW8sp2hp2 system to send mail to external recipients, whether the mail is sent from an internal GroupWise user or from an Internet sender somewhere outside our network. All external recipients will have the same SMTP domain name. The TIDs I found (7004434, 3230787) for creating an External Domain, External Post Office, and External User to create "Contacts" in the GroupWise system address book that point to external Internet e-mail addresses did not work. I'm not sure if I'm doing something wrong, the instructions are incomplete, or the process has changed for GW8.
We have GW8sp2hp2 with the exception of a WebAccess and GWIA that are both at 7sp4. There are two GWIAs, one for inbound in the DMZ (7sp4) and one for outbound (8sp2hp2). One TID I read said to link the External Post Office to the domain holding the GWIA using the Link Configuration tool. The inbound GWIA has a Gateway Alias Type of "GWIA", but the outbound GWIA did not have one defined. I made its Gateway Alias Type "GWI2". I can go to GroupWise|Gateway Aliases in the properties of the External User and add a gateway alias for either GWIA, however I cannot see GWI2 in the Gateway Link drop-down in the Link Configuration tool to select the second GWIA as the Gateway link (per TID 3230787).
Are there GroupWise 8-specific instructions for configuring this?

I added a Gateway Alias of [email protected] to the user and now the inbound GWIA accepts mail to that address and immediately forwards the mail through the outbound GWIA to the address configured in Internet Addressing. My remaining issue is that I want it to work for Internet mail addressed to [email protected] AND [email protected] I created a second External User and gave it a gateway alias of [email protected] but the same Internet Address, and that appears to work, but is complicated. GroupWise documentation says nicknames are not the solution, as mail cannot be addressed to [email protected]
It appears I've found a solution, albeit a slightly complicated one. But if Gateway Aliases are deprecated and nicknames aren't the answer, what is the supported solution for making this work?

How did we add a contact to our favorite in iOS 8 to access them in the multitasking ?

Is it possible to add a contact to our favorite to access them after in te multitasking of iOS 8 ? Thank You !

On the apple website : "From any screen, press the Home button twice to see the multitasking interface. At the top, you’ll notice something new: the faces of people you’ve recently talked to and — if you swipe to the right — your favourite contacts as well. "
I Just want to know how did we add a contact to our favorite (and so to add his face in that section (like in this capture))
ps: (sorry for my bad english)

How to add a contact to a specific group in iOS6

Whenever I add a new contact to Contacts (address book), the contact just gets added to default list. Is there an option in iOS6 to add the contact to a specific group within my contacts or to move a contact from one group to another? I know how to do this on my iMac, but do not how to do it on either the iPad or iPhone.

Hi,We are having a problem with one of our users Outlook2013, his Inbox is not showing the count of unread emails.When the PC is booted up you can see the folder flashup with the number of unread emails but then the count quickly disappears. Ihave tried all the solutions mentioned in the below Microsoft Forum, all are temporaryuntil we reboot the PC and start Outlook again, but nothing seems to be permanent.http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-inbox-not-showing-count-of-unread/5fc4f9e0-b3b6-4d51-b599-b4a624e8047d?page=1&tm=1436346526332We are using Exchange 2010 with Outlook 2013, so I am unsure if this iscausing the problem.The user has mentioned that when he is looking at the properties of thefolder throughout the day and selects the Synchronization Tab the Server andOffline folder...

Post office reporting in Unknown State

We have Groupwise Monitor reporting one of our post offices in an
uknownstate. This message is not sent continuously but when we check the PO
it is running fine. This PO is being monitored remotely over T1, is there
anything we can do to correct. We have tried to set up the SMNP monitoring
for that PO only and cannot get it to work.

[email protected] wrote:
> This PO is being monitored remotely over T1
Was this PO added manually? I have found that agents I add manually will
always show unknown after a restart of Monitor, and if I delete them and
readd they start working again. If this is your issue, then there is a bug
already logged for this.
Danita Zanre
Novell Support Forums Volunteer
GroupWise 7 Upgrade Guide!
www.caledonia.net/gw7upg.html

Proxy to Another Post Office's Account Failed

We have a wired problem here:-
- Primary Domain is GW 703HP2
- Running 4 Post Offices all 703HP2
- 2 WebAccess Servers - 1 in 702HP and 1 in 65(Win2K)
Now, we have an user, USER-A, (in fact more than 1 have similar issue) who has Proxy Access to USER-B's account on another Post Office.
If he uses GW Client, he's fine. He can proxy access to USER-B's account without any trouble.
However, if he uses 702HP WebAccess, he can reach his own account but fails to proxy to USER-B's account with the error message "Your post office is unavailable. Please contact your system administrator."
Another wired thing is that if he uses 65(Win2K) WebAccess, he can proxy.
Any suggestion on what's wrong? Many thanks.
sau970982 from Hong Kong

Originally Posted by DParkes
Yep, that's where I meant. And user B can use the GW7 Webaccess directly
alright ?, it is just the proxy access that is failing ?
Cheers Dave
Dave Parkes [NSCS]
Occasionally resident at http://support-forums.novell.com/
Yes, USER-B is ok using WebAccess-7 with his own account. The server itself is working fine if you're looking into your own account.
What we found out is that WebAccess-7 server fails to proxy to accounts on another Post Office. But our WebAccess-65 server can. Just don't what kind of configuration we missed or is that something wrong with the server.
sau970982

2 gwia's 1 Post office

Hello all:
Our ISP, Verizon Business, can be unreliable at times. The T1 circuit seems to go down during heavy rain storms, before heavy rain storms, and once every 3 months.
For fault tolerance, the plan is to add another gwia to our Post Office via another ISP . We are thinking that if the first line goes down, the MX record will point to the second gwia and we should be ok for email.
We are still on GW7.03. Are there any hicups to note with this setup? Any pointers (other than moving to Unix or GW8) to offer?
Thanks

Originally Posted by EBSR_PARAMEDIC
Hello all:
Our ISP, Verizon Business, can be unreliable at times. The T1 circuit seems to go down during heavy rain storms, before heavy rain storms, and once every 3 months.
For fault tolerance, the plan is to add another gwia to our Post Office via another ISP . We are thinking that if the first line goes down, the MX record will point to the second gwia and we should be ok for email.
We are still on GW7.03. Are there any hicups to note with this setup? Any pointers (other than moving to Unix or GW8) to offer?
Thanks
It depends... Is your current GWIA on "the inside" or directly connected to the internet?
if you are NAT'ing an outside address from your providers to the GWIA, there is not a direct need to add a second GIWA. Just make sure the outside IP of you second internet connections has a NAT for the SMTP port pointing to your GIWA.
Make sure they add the second ip record to the outside MX record of your mail exchange domain, and that should be set.
You can setup your GWIA to smart relay to more than one address. Just add the two outgoing addresses (a space to separate them) on the GWIA's outbound host. That should let the GWIA use the first one until if fails and then fall back to using the second one. (As found here : Novell Documentation)
One thing to watch could be the outside IP on your second internet line and if it matches the FQDN name your GWIA is reporting. If those two don't match up according to the internet DNS records, your mail might be dropped as it is seen as possible spam attempt. So I'd advise to give the failover a good test before counting on it fully working when needed.
Cheers,
Willem

Cannot add a contact

We use Skype in our office frequently to IM each other. Two of the girls in the office seem to be having trouble recently. They are able to IM each other using a message in Recent, however neither of them appears in the other's contacts. At the very top of the actual message window it says "....is not your contact" or something like that, and when they click the add to contacts button nothing happens. They have also tried going to Contacts, Add Contact, but still nothing happens. Any ideas??

Forgot to mention - they are both using the latest version of Skype.

TS3988 My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?

My wife bought an iPad Air and synced contact from our PC (Outlook), now all our contacts in Outlook have gone and we have to go to iCloud to get them, and even then they are a bit jumbled. How do I get my data back onto my PC?

If you can see the iCloud contacts in Outlook, you can copy them back to your PC by selecting all the contacts (click one, then press Control-A), then drag and drop the selected contacts to Contacts under My Contacts on the left sidebar of Outlook.
If you want to copy your calendar back to Outlook, select your iCloud calendar on the left sidebar of Outlook, switch to the list view (select View from the ribbon, then click Change View>List), select your events (click on a single event, then press Control-A), then control drag and drop them to Calendar under My Calendars on the left sidebar.
Then you can sign out of iCloud on the iCloud control panel and your local copies will still be there. If you want to add your iCloud email account back to iCloud, you can do this with these settings: http://support.apple.com/kb/HT4864.

Jabber 9.6 Cannot Currently Add the Contacts

I'm running Jabber for Windows 9.6 with Jabber Cloud (formerly WebEx Connect). I have all my internal users in addition to a large number of external contacts including Cisco employees and some of my clients. Today I was adding 2 contacts at another client. The first contact was added without issue. When I tried to add the second contact, I received the error message:
"The system cannot currently add the contacts. Try again later or contact your system administrator."
We haven't changed anything on our end but every time I try to add this contact, I get this error.

Can you try clearing Jabber cache?
Close and exit out of Jabber (if still running)
Clear the Local Jabber cache. This data is found in the following two directories:
Win 7:
%userprofile%\AppData\Local\Cisco\Unified Communications\Jabber
%userprofile%\AppData\Roaming\Cisco\Unified Communications\Jabber
Win XP:
%userprofile%\Local Settings\Application Data\Cisco\Unified Communications\Jabber

HT204053 We have apple computer and set up 1 apple id and for music on iPods. Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do.

We started with an apple computer and set up 1 apple id and for music on iPods. Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do? Right now we have the same apple id on the PC, ipodtouch, ipod, and 3 phones. They said make seperate clouds?

Hello there MizzouTrojan,
If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
iCloud: Share a calendar with others
Share a calendar privately
Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
Note: You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.”
Type the invitee’s email address in the Add Person field and press Return.
Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only).
For each person you want to share the calendar with, repeat steps 2 and 3.
When you’ve invited everyone and set their privileges, click OK.
Invitation emails are sent from your iCloud email address to the participants you specified.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How do I add a contact form / feedback form to my site?

Is there a way to create forms in Muse? Or are there any widgets that can create forms?

While there isn't yet native support for web forms in Muse (they're on our roadmap), there are some workarounds until we get there. Dani created a rough-cut video on how to add a contact form to your Muse site using Business Catalyst. Go to our Past Events list of Jam Sessions http://www.adobekb.com/events.html#past and watch the Adding Contact Forums session:
Users have also reported success adding contact forms to their site using Adobe FormsCentral, Jotform, or Wufoo and inserting them via Object > Insert HTML.
Message was edited by: Corey@Adobe
(Removed broken AdobeTV link and added link to Jam session archives)

How do I add new contacts to my Hotmail on my IPad?, How do I add new contacts to my Hotmail on my IPad?, How do I add new contacts to my Hotmail on my IPad?, How do I add new contacts to my Hotmail on my IPad?

How do I add new Contacts to my Hotmail on my IPad?

You can add them via the Contacts application on your iPod or via the Hotmail interface in a web browser.
For future reference, this forum is for older iPods not the iPad, so you post future questions regarding your iPad in the iPad forums.
https://discussions.apple.com/community/ipad
B-rock

My wife and I have different Apple ID's however when we purchased IPhone 4s and set up our accounts our contacts and apps merged!!! how do we prevent this?

My wife and I recently purchased IPhones (4S), we use an iMac and an IPad 2, we have separate Apple ID's but when we fired up our new phones and began setting up the systems, our contacts and applications merged. Since then I have disabled ICloud from my phone and my iMac until we can figure out how to avoid this crossover of information. Are we overlooking something?

Hi Shadow,
The apps are forever tied to the Apple ID that they were purchased under. Your iCloud accounts are also Apple IDs, so although you can sync the apps to your individual device via iTunes, you will be syncing them to the devices, not to iCloud.
Since you are still purchasing everything under one Apple ID, then I'm presuming that they live in a single iTunes library on your computer or Mac? If that is the case, then you would just want to:
Hook up a device to the Mac or computer
Select the device when it shows up under devices
Once selected, the Device Profile screens display to the right - click on the Apps tab, and select which ones you want on that device.
Also check all the other profile pages to make sure they are set up to sync the things you want to sync to that device.
On the info page, you will see that you can sync Contacts & Calendars via iCloud or via iTunes. If you want a single source for contacts & calendars for both of your devices, sync them via iTunes. If you want your own sets of contacts & calendars, sync them via iCloud.
Do you have iCloud set up on the computer or Mac? If so, which iCloud account are you planning on using?
Some of the decisions you will want to make will depend on how you have your computer or Mac configured in conjunction with iTunes. One Apple ID, but one or two User Accounts for the computer or Mac? iCloud on the computer or Mac? What do you want to share and to not share?
Post back with any questions.
Cheers,
GB

The version of GroupWise you are using cannot access this post office

I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005

*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis

Add our contact to ovi gps post office

Similar Messages

Maybe you are looking for