Add page, keep all subsequent pages flow intact?

There's gotta be a way!
I want to add a single paragraph to a long document.
So I figure, add a page, and then all subsequent pages will retain their flow with images.
But it doesn't work that way.
All the images (full page images, can't be anchored) move along to the "wrong" places in the text.
Is there any way to FREEZE the formatting of subsequent pages??????
I thought I could do it by adding a page at the point I add the text, but that just doesn't seem to work?!

This is the best I can do...
I added a blank page after page 101 to accommodate extra text I planned to add.
Obviously that doesn't work. What I need to do is allow the TEXT to flow but keep the pictures where they are.
That way, I can add text to page 101 and have it extend the paragraph on page 111 to the end of that page WITHOUT making ALL the subsequent pictures throughout the entire rest of the book MOVE. Which they do. I want to FREEZE everything after page 111. Is that possible?

Similar Messages

I want to remove my itunes library to a thumb make memory space - how can I make sure I keep all playlists and organizing intact?

I want to remove my itunes library to a thumb make memory space - how can I make sure I keep all playlists and organizing intact?

Do you mean a flash drive? I don't know if I would trust one of those entirely. Make sure you make a backup.
Copy the entire iTunes folder to the flash drive. Start iTunes while holding down the option/alt key and guide it to the library on the flash drive. If you forget to plug in the flash drive before starting iTunes in the future you will have to do the option start thing again.

Removing Mailbox DBs, while keeping all AD Exchange attributes intact?

So I have migrated my groupware platform from Exch2010sp1 to Google Apps (sorry, MS, but if you gave 365 away for free to 501c3's I would have considered it). I am using
Google's Google Apps Directory Sync (GADS)to populate GApps, and intend to maintain my AD infrastructure and add users that way via the Exchange Admin tools.
However, I don't need the Hub/Client Access/Mailbox DB role installed anymore.
Everything that I have found in looking to date is for the reverse (e.g. people with problems where they have managed to remove the Mailbox DB role but they still have the Exch AD attributes) of what I need. But in looking at EMC and the PS Remove-Mailbox-Database
cmd, everything seems to want to remove the Exch AD attributes. And, of course, just disconnecting the Mailbox DBs isn't feasible, as the DB still contains all my user mailboxes from pre-migration.
Is this even possible? Would it be something I could do via ADSIEdit? I'm certainly willing to go there, but probably not without some good expert guidance, as I feel like I could hose my schema pretty good by trying that on my own.
Much thanks in advance for any assistance.

As I understand, you want to uninstall the Exchange 2010 Hub/Client Access/Mailbox roles but keep the AD.
If you mean the specific Exchange attributes for my AD users, but get rid of the actual mailbox store data, then yes.
I appreciate the response, but those steps are exactly what I don't want to do, namely:
"On the Readiness Checks page, please view the status to determine if the organization and server role prerequisite checks
completed successfully. When the checks have completed successfully, click Uninstall to remove the specified server role(s) or the entire installation of Exchange 2010."
This will remove Exch from AD, as well as the attributes. I want to do 1/2 of this. Remove the Exchange mailboxes &
Exch server functionality, but keep the AD/LDAP attributes so my sync to Google Apps will continue to work based on the rules I've set.

Edit JS Script CS4 (Add XML Tags All pages automatically)

Hi, all Scripter
I have a javascript for add xml tags (ETMV2 Pearson, InDesign CS4). We have select my powermath equation data then run script. Script automatically insert xml tags both side (open/close). But we select one by one then run script its time taking.
var d=app.activeDocument,
root=d.xmlElements[0],
ie = root.xmlElements.add("inlineequation", app.selection[0]),
im = root.xmlElements.add("inlinemediaobject", ie.texts[0]),
to = root.xmlElements.add("textobject", im.texts[0]);
to.xmlAttributes.add("role", "xpressmath");
Example 1: My powermath equation data (InDesign CS4)
[&x^{2}+y *frac*{1}{2x}&]
Select powermath equation data then run javascript below mention. Script insert xml tags.
<inlineequation><inlinemediaobject><textobject>[&x^{2}+y *frac*{1}{2x}&]</inlineequation></inlinemediaobject></textobject>
Its time taking and select one by one
Result:
My main concern is that is this possible script find open [& and close &] all poermath equation data automatically then insert (add) xml tags all pages.
Thank/Regard
snegig

Hi,
John Hawkinson thank you so much your suggestion.
I am new this type of discusion (on this page). So i think anybody could not replay my answer. So i repost my question.
I want insert tags in my Indesign CS4 files. Is this posible when i select my powermath equaiton then run script. Script add tags automatically before/after my equation. Please ignore IDML word.
Yes i an comfortable with XSLT presently i working with Pearson ETMV2.
I have one more question when i past my snapshot its appear properly but when i agin see my commant then my snapshot disappear (see small blue rectangle).
Thank you John again i am new in this industry please guide.
snegig

Multiple videos on one page - need to keep all visible once played

Hello all,
Firstly, I'll admit that I'm a novice as far as DPS goes...the app I'm working on is only my second attempt. I've managed to put the bones of it together, but I'm having problems with some video files.
I only realised today that you can't use InDesign's animation facility as it uses Flash (this app's for the iPad).
This is what I need to achieve: on one page, there are numbers 1, 2 and 3, running vertically. These are buttons. When each button is pressed, I want a line of text to fade in next to it.
I couldn't get this to work with an image sequence so I've created three movies. I dropped the first one in and it faded in fine when button one was pressed.
The problem is - when I press button 2, the text (movie) next to button one disappears. Is there any way to keep all three movies showing their last frame at once?
Sorry this is a bit long-winded....hope you can help people!
Cheers,
Anth.

I would rather use MSOs to get the effect you describe.
For each button a 2-state MSO would do the job perfectly.

Enlarge page size but keep all margins, text, images as they are now using ID CS 5.5?

How do I enlarge the page size of a file in ID CS 5.5 while keeping all text, margins, images as they are now? Using a mac.

Hi Buzz,
The issues you are having are caused by some underlying differences in the flex libraries in EB 3.4 and 4.5. Using EB 4.5 allows using flex spark components however these are not backward compatible to CS 5.5. In order to have an extension that is backwards compatible to CS 5.5 we strongly advise using EB 3.4. That does unfortunately mean that you will not be able to use the design view. The AutoTheme library was created to provide the theme syncing ability that is available in EB 4.5 through the "CSInterface.instance.autoThemeColorChange = true; call to EB 3.4 extensions and does not work with EB 4.5 (as you have found) because it is trying to set the theme of a different set of UI components which are not available in EB 4.5.
So to summarize:
AutoTheme.sync() is what you should use for EB 3.4
"CSInterface.instance.autoThemeColorChange = true; should be used with EB 4.5
they provide equivalent functionality and should not be mixed.
Finally we would strongly advise using EB 3.4 for CS5.5 extensions.
For the combo box issue unfortunately we only had the capacity to create a broad theme that should cover the majority of the controls correctly, however some controls are not ideally themed. However we do provide AutoTheme.postThemeColorChange which can be set a function to run immediately following theme setting that should allow you to customize the theme to cover these cases.
I hope that helps,
Thanks,
Robert.

I am making a book and only have 23 pages done. I keep hitting the plus sign to add pages and no extra pages come up

I am making a book and only have 23 pages done. I keep hitting the plus sign to add pages and no knew pages appear. Help

Assuming you have iPhoto 9 (11) give this a try: make a temporary, backup copy of the library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Since only one option can be run at a time start with #3 followed by #4 and #1 as needed.
3 - try adding a page after each fix.
OT

Say subject A is on top of page 1 and subject B is on top of page 2. As more text is added subject 2 will be pushed to page 3 eventually is there a way to always keep all Subjects on top of the page even it is pushed forward to a new page?

Say subject A is on top of page 1 and subject B is on top of page 2.
As more text is added subject 2 will be pushed to page 3 eventually is there a way to always keep all Subjects always on top of the page even if they are pushed forward to new pages?

Hi ameryfromny;
We can place a pagebreak before the Heading or Sub-Heading manually prior to or even after creating a Table of Contents. So that the Heading or Sub-Heading is placed always on top of a page.
To create a Table of Contents:
Under Format panel, define paragraph text as Title, Subtitle, Heading, Heading2 ..... and so on for displaying in TOC.
After completion of document writing, place cursor where a TOC is to be displayed.
Insert > Table of Contents > Document
A table of contents generates automatically.
Regards,

I'm on plan mode In Adobe muse, I have my paster page at the bottom and all subsequent pages at the

I'm on plan mode In Adobe muse, I have my paster page at the bottom and all subsequent pages at the top. I've changed my page dimensions in the master page by altering the height, however, these changes have not been made in the subsequent pages up top. How come?

Several possible reasons:
1) Is the master page applied to the pages?
2) Did you increase or decrease the height of the master? The size of actual pages is the maximum of the size of the applied master page and the size that's required to contain the content that's been laid out on the page.
3) Has the minimum height of the non-master pages ever been set? If so, it overrides the master page value. To get the normal page to again honor the minimum height set in the master page go to the individual page in the Plan view and use the context menu to select "Reset Page Properties". This will revert all the page properties to match those of the applied master.

How to change the "Page Flow Error - Unsatisfied Role Restriction" page

When you try to access a page and are denied authorization to it, Weblogic automatically redirects you to a
"Page Flow Error - Unsatisfied Role Restriction" page, on the bottom of which tells you what roles you have to be in in order to access the resource. My question is how can I change this page to match the general look and feel of my application?

I know you asked this almost a month ago, so you may have already figured it out... but you just need to add a handler for com.bea.wlw.netui.pageflow.UnfulfilledRolesException. Something like this:
@jpf:catch type="com.bea.wlw.netui.pageflow.UnfulfilledRolesException" path="roles-error.jsp"
You can put it at the class level of a specific page flow, or at the class level of WEB-INF/src/Global.app, which will apply it to all page flows.
Hope this helps.
Rich

Loading a Page Flow into a region programmatically

Hi everyone,
I'm currently using JDeveloper 11.1.1.0.2, I have a fragment with a backing bean that programatically generates a set of RichPanelSplitters to create a page with a user-defined amount of rows and columns.
This is working fine, but while creating these panels I want to insert into each facet a RichRegion that will contain a Page Flow that I've created (e.g. my-flow-definition.xml which I would normally drag onto a page and select 'Region' from the context menu).
I can easily create a RichRegion in my managed bean, but I have no idea how I'd 'insert' my flow definition into it programatically, is this possible?
Thanks in advance, Tom

Hi,
Ok, the post I linked you to won't be useful for that as you really need a "varying amount" of task flows in your page. Since you also posted on another topic about that part I pretty much get that you're trying to create a page composer on your own. MDS would greatly help you do that but, sadly, it's not available and you said your time frame is pretty short in the other thread, leaving you with very few options. Here's what you can attempt, but it's going to be complex:
1. Create a custom TaskFlowRegionModel (you'll have to check the ADFc API, including the private one, to create a working one). This step is the most complex one;
2. Make sure all dynamically added task flow do NOT use page defs / data binding nor call task flows that does;
3. Create an user preference table;
4. Create a model layer service managing the table;
5. Change your managed bean you retrieve/write properties on the service and creating region dynamically using your custom made RegionModel created in 1;
6. Add code to include the current fragment's content at that point, which is very fishy outside JSP pageContext.
You should plan between 10~20 days to create the model alone (step 1) and maybe 5~10 for fragment inclusion step 6. I've created my model in 3 days and the inclusion code in 2, so it's doable in that time frame as well, but I'm not a newbie with JDeveloper, ADF nor JSF at all so I would take those number as close to absolute minimum time required and even then I could not overcome the point 2's limitation. I'm not allowed to share the code though, sorry about that.
Regards,
~ Simon

Transaction rolled back in Page Flow

I am getting the following exceptions out of nowhere. It's non-deterministic, it just happens from time to time. The same steps can lead to normal behaviour or this error... It all ends with timed out exception. I don't know what is causing it, I don't know how to fix it. Does anyone have any ideas?
From the log:
|javax.ejb.TransactionRolledbackLocalException
javax.ejb.TransactionRolledbackLocalException: Client's transaction aborted
     at com.sun.ejb.containers.BaseContainer.useClientTx(BaseContainer.java:2267)
     at com.sun.ejb.containers.BaseContainer.preInvokeTx(BaseContainer.java:2147)
     at com.sun.ejb.containers.MessageBeanContainer.beforeMessageDelivery(MessageBeanContainer.java:906)
     at com.sun.ejb.containers.MessageBeanListenerImpl.beforeMessageDelivery(MessageBeanListenerImpl.java:38)
     at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:131)
     at $Proxy62.invoke(Unknown Source)
     at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
     at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:661)
     at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
     at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
|#]
[#|2008-01-29T13:15:24.015+0100|INFO|IS5.1.3|javax.enterprise.system.container.ejb.mdb|_ThreadID=39; ThreadName=Worker: 24;stacktrace-id=1;|javax.ejb.TransactionRolledbackLocalException
javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: javax.ejb.TransactionRolledbackLocalException: Client's transaction aborted
javax.ejb.TransactionRolledbackLocalException: Client's transaction aborted
     at com.sun.ejb.containers.BaseContainer.useClientTx(BaseContainer.java:2267)
     at com.sun.ejb.containers.BaseContainer.preInvokeTx(BaseContainer.java:2147)
     at com.sun.ejb.containers.MessageBeanContainer.beforeMessageDelivery(MessageBeanContainer.java:906)
     at com.sun.ejb.containers.MessageBeanListenerImpl.beforeMessageDelivery(MessageBeanListenerImpl.java:38)
     at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:131)
     at $Proxy62.invoke(Unknown Source)
     at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
     at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:661)
     at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
     at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; nested exception is: javax.ejb.TransactionRolledbackLocalException: Client's transaction aborted
     at com.sun.ejb.containers.BaseContainer.checkExceptionClientTx(BaseContainer.java:2570)
     at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2422)
     at com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1056)
     at com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
     at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:154)
     at $Proxy62.invoke(Unknown Source)
     at com.stc.bpms.bpelConnector.impl.AbstractWSProvider.invoke(AbstractWSProvider.java:105)
     at com.stc.bpms.bpelImpl.runtime.Interpreter$1.run(Interpreter.java:661)
     at com.stc.bpms.bpelConnector.impl.ExecutorImpl$WorkImpl.run(ExecutorImpl.java:338)
     at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:54)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:382)
|#]

PaulPeters wrote:
The particular Page Flow instance has remained active for some reason and just timed out in accordance to the settings for eInsight on the Integration Server's section.
Does the Page Flow start with an Event-Based Decision ? There's a small reference to that in the User Guide, but quite important in real-life.
Do you implement time-out features inside the Page Flow ?Thanks for your reply.
It happens after series of clicks. When I keep the app busy.
My page flow looks like this:
Event Based Decision, single link, continues with a while(true) loop, which contains everything else.
JCD loads object from database, they are shown in a table with links (buttons styled as links) and some controls (pagination, but non jcaps, my own, and sorting)
After click, the page flow continues to a detail page. From detail page you get back by a back button in browser. (Is this causing the problem?)
After choosing the sort option or pagination, the page flow returns to the beginning of the while loop.
I don't use any time-out features
I've migrated the UI to another domain. The first domain runs a scheduled process. Now I don't get time outs. Maybe that was the problem. But the test team didn't test it thoroughly yet.

Warn About Changes and page flow

Hi, in dev guide, it is said:
For any single page, or first page in a navigation flow where the retainAM URL parameter value is set to Y (and the pages share the same root UI application module) as you navigate between each page, set the Warn About Changes property to True on the pageLayout region.
in other word, if pages in page flow are in the same AM, after changing am in the first page, anytime leave the following page to click the home link(oracle branding), the WarnAboutChanges msg should be alerted?
But,
Now I have two pages, using the same AM, set the two pages' property "Warn About Changes" to true.
And I want to implement this: after inputing some words, and click a sunmitButton forward to pageB(add retainAM = Y in setForwardURL in code), then in pageB don't do anything, but click home link, WarnAboutChanges message does not alert.
Could anyone help to explain this?
And how to implement the page flow warnAboutChanges?
And how root application module to set if different pages in different AMs?
PreThanks to you very much!

But,
Now I have two pages, using the same AM, set the two pages' property "Warn About Changes" to true.
And I want to implement this: after inputing some words, and click a sunmitButton forward to pageB(add retainAM = Y in setForwardURL in code), then in pageB don't do anything, but click home link, WarnAboutChanges message does not alert.
Could anyone help to explain this?
I asked u previously also read dev guide properly, here it what dev guide say:
"By default, the Warn About Changes property is set to True for each of the items in this list except for the
OASubmitButtonBean whose default value is False (a ccording to the UI guidelines, the "Warn About
Changes" check should be performed for all submit button instances except for Cancel, Apply and Submit
buttons). If you want to explicitly enable the check for a submit button, set this property to True. Note that can
also set it programmatically by calling OASubmitButtonBean.setWarnAboutChanges(pageContext,
Boolean.TRUE) in processRequest()."
I hope this answers ur question.
And how to implement the page flow warnAboutChanges?
Read "Save Model ('Warn About Changes')" in dev guide :).And how root application module to set if different pages in different AMs?
You can nest differnt AMs in on AM in AM wizard.--Mukul

Is there a way to RECREATE the Page Flow Overview in BEA Workshop 4WL?

BEA Workshop foe weblogic makes JSP development a lot simpler, and the auto generated Page Flow Overview is a nice feature - as long as your page flows are relatively small and simple. It doesn't take much to completlly confuse the tool though and you end up with a workflow with all sorts of flow lines cris-crossing each other - often I which I could just reach in and move a single jsp or action item and the whole mess would straighten out.
Is there a way to reposition individual elements of the Page Flow Overview or failing that to have it Recreate itself (in hopes that it will straighten out the mess itself).
Also is there a way to manually edit the flow - adding notes and/or objects and flow lines?

There is no explicit "refresh" button for the Page Flow Overview (PFO), however clicking the "Show Link Labels" button on the toolbar will cause the graph to be redrawn.
That said, in my experience replotting the graph nearly always arrives at the same layout. While the layout algorithm does a pretty good job with large graphs generally, some very highly connected graphs can be pretty tough to read right off the bat.
For various reasons we've moved away from having users manually tweak the layout to deal with this situation. However, we added some highlighting functionality to help make graphs easier to read even if the layout appears tangled.
If you click the Graph Tracing button on the PFO toolbar you can select a given node and see all directly connected nodes highlighted. If some of the directly connected nodes are far away on the canvas, park the PFO next to the Page Flow Editor view and you'll be able to see a more regular arrangement of the same nodes.
When you're more interested in following a specific path than seeing the whole immediate neighborhood, you can hit the slash key repeatedly to cycle through highlighting all the links connected to the selected node.
Finally, you can ctrl-click to multi-select links of interest if you want to trace a given path all the way through the flow. If you were doing this for documentation purposes you can print the graph in this state, or click the Export to Image button, to make a copy of the highlighted path.
WRT your other question about editing the flow - the Page Flow Editor is intended to complement the PFO as a means of efficiently editing the flow. Select a node in the PFO and you be able to add/modify connections to that node viat the Page Flow Editor.
There is no provision to add notes or other objects to the flow (though the exported image files can of course be annotated in a graphics editor for documentation purposes).
I hope that helps.

Multiple entry points into a Page Flow

Is it possible to define multiple entry points into a PageFlow ? That is, can I forward to an arbitrary Action inside a PageFlow (other then the standard begin) ?
If so, is there sample code illustrating this ?
Thank you
Cristian

The flow view should show the action from the anchor.
"Cristian" <[email protected]> wrote in message
news:405892c9$[email protected]..
>
John,
That answers my questions.
One more thing though :
When using an anchor to forward from a jsp to an action in a pageflow,
the 'Flow View' does not show the corresponding link. Is that normal ?
Thank you
Cristian
"John Rohrlich" <[email protected]> wrote:
Cristian,
Yes the samples implicitly go to begin because jumping into the middle
of
some flow can lead to code that is difficult to follow and to debug.
If
there are pieces of a page flow that are useful in multiple contexts
you
might want to make them independent page flows or nested page flows
You can go from a jsp to an action in another page flow using an anchor
and
setting the href attribute, for example
<netui:anchor
href="/WebApp/anotherPageFlow/someAction.do">continue</netui:anchor>
notice that you set href= rather than action= because you are going
outside
of the local page flow.
If you want to go from an action in one page flow to an action in another
page flow of the same application you can do this
* @jpf:forward name="success" path="/anotherPageFlow/someAction.do"
If you want to pass a form to the action you can do that also. You just
follow the last example and add the form to the forward, for example
return new Forward("success", someForm);
I hope that covers it - john
"Cristian" <[email protected]> wrote in message
news:405787a2$[email protected]..
I need to go from either an action or a jsp in one page flow to ajsp/action in another page flow, passing around a session scoped action
form.
What is the syntax for the forwarding path ?
All the samples I found implicitly
forward to the 'begin()' action in the destination jpf.
How do I tell it to go to
another action/jsp in the target jpf ?
Thanks
Cristian

Add page, keep all subsequent pages flow intact?

Similar Messages

Maybe you are looking for