Add page, not work well

pages stop showing well.

Please post a screen shot, also advise what version of OS X is running on your machien (I doubt it's 10.7.2), how much RAM is installed, and what version of Pages you are referring to.

Similar Messages

Pages not working well since Mountain Lion installed.

Since installing Mountain Lion on my MacBook Pro, Pages constantly freezes, and I have to force a quit, followed be restarting the computer - sometimes twice or thrice. I've never had to do that before, and it is very frustrating. Even today I turned on the computer, went to launch a simple document that I've viewed many times in the past, and instead of opening, I have to force a quit again! Any ideas?

I saw on another post yesterday that Apple is aware of this and should have it fixed by October 2013. In the meantime, my drive's going back to Apple for a refund today. Thank God it's still under warranty! Hope nothing else on my iMac crashed. Haven't seen anything. I've switched everything to apple - phone, ipod, iMac. Wish I would have gotten another pc and stayed with my Droid.

I'm having constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. I can, however, work well in Explorer.

For the last few weeks I have had constant problems with pages not working. I.E.: I cannot fill in writeable fields, click on buttons... or anything... nothing on the page works. And, this is not exclusive to a particular site. It does seem to be a browser issue, because I can work well in Explorer.

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My Safari browser is not working well. Junk pages keep poping in and key pages for me appear intoxicated by alien pop ups preventing me navigate that page. Updated last Safari version and problem prevailed. Tried downloading Safari for Mac OS X Mavericks.

My Safari browser is not working well. Junk pages keep popping up and key pages, for me, appear intoxicated by alien pop ups preventing me navigate that page.
I updated to latest Safari version (7.0.4) but the problem persists.
I tried downloading a new version of Safari for Mac OS X Mavericks but couldn't find it available.
Thanks for your help.

The pop ups are malware. It's not necessary to reinstall Safari.
Help here ..
The Safe Mac » Adware Removal Guide
The Safe Mac » Genieo
The Safe Mac » Mac Malware Guide
Just so you are aware, on a Mac running Mavericks, the only way to reinstal Safari to to restore OS X using OS X Recovery

Plzz i think i opened a hacked internet page and now notting works well autocad stopped working firefox as well and i donno wat to do

plzz i think i opened a hacked internet page and now notting works well autocad stopped working and firefox as well ........could mac os be virused??

There are no Mac viruses, only malware that requires your assistance to get installed. For more on this, see:
http://www.reedcorner.net/guides/macvirus
As to your problem, we can't say what might have happened without more information. Try restarting your computer, and if that doesn't help, we need to know what you saw and what's happening now in greater detail.
(Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

To whom it may concern Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E 2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in goo

To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Microsoft Excel 2013 add-in not working after update

I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
with the following error message displayed.
I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick. This is not the only add-in it is affecting
as there are some 3rd party add-ins are affected as well.
Please advise how we can fix this without needing to re-install Microsoft Office. Thank you!

I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
and look for keys named OPENx, where x is the order number the addin is loaded
if not "ticked" instead of \Options look in \Add-in-Manager
With a VBA macro or in the VBE's immediate window return
Application.LibraryPath
Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
Are you using a Chinese system?

MDIS Unmapped Values ADD is not Working Throws errors

Hi Experts,
I have a Qualified table where the Non qualifier is a Lietaral Date field.
Qualified Update -> Update
New links -> Create
Existing Links -> All mapped Fields
MDIS unmapped values -> ADD
All is working well,When the Incoming file has exactly the same NOn qualifier as in Data manager, But when the incoming file has some New non-qualifers then it fails with a value Exception...
1166657856 2011/09/27 16:29:16.326 GMT Importing: 'Samplee_27sep[1].xml.MDM_DATA' Table --> 'CostCentre.CostCentre' Table.
1166657856 2011/09/27 16:29:16.341 GMT Could not create lookups. Source record number: -10, error message : Type mismatch. Invalid field values.
1166657856 2011/09/27 16:29:16.346 GMT Import failed. Could not create lookups. Source record number: -10, error message : Type mismatch. Invalid field values.
Import action: Update (All Mapped Fields)
Source record no: 1
But ideally it should NOT fail as the MDIS Unmapped fields are set to ADD..
I would expect it to Add any new NON qualfiers to QT and add that Link to that Record.
But it is throwing error...
Did anyone face this issue till date???
Kind Regards
Eva
Why is this behaviour..

Hi,
In the Import map as the Non qualifier is the literal date field and in DM i can see they are stored in MM/DD/YYYY format.
The incoming value from the File is also the same format but the Config parameters date format in Import map is different, is this the problem for not adding New dates even though the MDIS unmapped fields are set to ADD..
Also, are Config parameters Specific to Map or Repository Or server!!
i.e if i change a config parameter and save the map.
will the config parameters in all import maps be changed automatically??
Kind Regards
Eva

My imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

my imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing

Hello,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Firefox 8 not working well, in facebook plzzz help !!!

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/897988]]</blockquote>
my firefox 8 is working slow in every prosess .....its not working well smoothly .....also with facebook.....synaptics point device is not working properly in facebook with firefox 8 ....
there was no problem in my laptop...because other browser working smoothly....
but firefox is my MOST FAVORITE
PLZZZZ HELP !!!!

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Seek your help about the issue of Sun JES can not work well in HP9000

Recently I am testing Sun JES (Java Enerprise System) 2005Q4 in HP9000 (HP-UX 11.11), but I encountered some troubles, after installation, Sun AM -- Access Manager (its old name is Identity Server) and Sun Portal Server can not work well, others (such as Sun App Svr, Directory Svr, Admin Svr) are OK.
When I try to access AM admin console (http://myhost.mydomain.com:8080/amconsole), exception was thrown as below:
exception
javax.servlet.ServletException
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:300)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
root cause
java.lang.NoClassDefFoundError
com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:99)
com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:242)
com.iplanet.am.console.base.ConsoleServletBase.checkAuthentication(ConsoleServletBase.java:355)
com.iplanet.am.console.base.ConsoleServletBase.validateSSOToken(ConsoleServletBase.java:238)
com.iplanet.am.console.base.ConsoleServletBase.onBeforeRequest(ConsoleServletBase.java:188)
com.iplanet.jato.ApplicationServletBase.fireBeforeRequestEvent(ApplicationServletBase.java:1105)
com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:591)
com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
After many test, I still can not finger out what is the real reasons casued this exception in HP-UX.
The possible risk is JES 2005Q4 requires some software and hp-ux bundles patches before install JES, but I can NOT find the exact version of them from hp web site, and use corresponding higher version to release them.
JES 2005Q4 needs:
Perl (B.5.6.1.F) HP-UX11i
Tour A.02.02
Libiconv 1.9.2
GOLDAPPS11i & GOLDBASE11i (June 2004, B.11.11.0406.5)
I installed:
perl_D.5.8.0.G_HP-UX_B.11.11_32+64
TOUR_B.03.01_HP-UX_B.11.11_32_64
libiconv-1.11-hppa-11.11
GOLDQPK11i_B.11.11.0612.459
I am very appreciated for your help!
Thanks!!
Vhu
===============
some test env:
bash-3.00# uname -a
HP-UX rp3440 B.11.11 U 9000/800 1110163507 unlimited-user license
bash-3.00# java -version
java version "1.5.0.01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.01-_06_jun_2005_05_20)
Java HotSpot(TM) Server VM (build 1.5.0.01 jinteg:06.06.05-04:39 PA2.0 (aCC_AP), mixed mode)
JES media:
java_es_05Q4-ga2-hpux-parisc.zip
installed components in JES: App Svr, AM, Portal Svr, Directory Svr, Admin Svr.

This is a double posting, please only post in one discussion at a time.
Keynote 6.5 is stable and reliable under Yosemite for most users.
As with all new operating systems and applications, a small number of users find a few problems.
Copy and pasting text from and into Keynote from all the applications I have, work perfectly: the applications include; Safari, Mail, Word, PowerPoint, excel, Pages, Numbers, iMovie, Photoshop, InDesign, Illustrator.
If you want to place graphics into Keynote, use one of the following methods:
Insert > Coose
click the media button on an image placehoder
click the media button on the tool bar
drag and drop from a Finder window
Copy and pasting images into Keynote is not supported

After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Safari 5.1.1 I no longer have access to my bookmark folders, just a search that does not work well. How can I retrieve access to bookmark folders?

OS 10.6.8 Safari 5.1.1 I no longer have access to the bookmark folders. There is just a search function that does not work well. Is there any way to get access back to my bookmark folders?

This site didn't say anything about one wrong ID, but only talks about changing the Apple ID. If it didn't work the first time why should it work now?

Why ps3 is not working well with airport

why ps3 does not work well wth the airport?

If you are referring to online gaming, then PS3 like all non-apple devices uses upnp to open ports.
Apple uses NAT-PMP to open ports.. East and West.. never the twain shall meet.
If it is internal wireless issues.. that is different.. airport should be just like any other wireless router.
If you tell us the issue we have more hope to help.

I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?

I have to reinstall Mail as it's not working well. How can I make a back up of my emails so as not to lose them all?

Thank you for your time Woody. Recently the Mac seems to freeze a lot, seemingly due to a problem with the airport, especially if the computer is inactive for anything more than a few minutes. Then yesterday I suddenly couldn't send or receive messages so I got in touch with my server and they reconfigured the mail account. I can now receive messages but can't send them, always getting a timed out message when I try to send an email. I phoned the server again and they said it must be a problem with Mail as we tried sending a message online from the server's webpage and it worked fine, so they suggested I reinstall Mail. So hence my original question. Sorry for the rambling! I'm not very computer minded.

Add page, not work well

Similar Messages

Maybe you are looking for