Add pages dynamically to adobeform

Hi,
I need to add pages dynamically to adobeform. For example, i need that a page appears in the final PDF if one table have values, but if table is empty, all of page items should not appear in the final PDF.
Can anyone help me ?
Best Regards,
João Paiva

Please! no sarcasm, You arent giving qwwerty a chance to post his code.
I'm sure he's got a lot to offer and just waiting for the right opportunity.
Ok qwwerty, when you're ready....

Similar Messages

Can you customize report "page" tabs so they are named automatically from data in the file, and can you add "pages" dynamically?

I am looking to develop a dynamic report template for our internal reporting use. Namely, I am looking for the ability to do two things:
1) Update the names of the tabs at the bottom of the report template (lets call them the "pages" of the report) from data stored within the file (for instance, label a tab with the "description" property from a given group or channel)
2) Add additional tabs with associated graphs based on the number of groups a particular file has (for instance, a particular component could have a test life of 2000 hrs, but have been put through several different tests along the way. It would be nice to show an overall life summary on the first tab, and then break out the data from the individual tests on seperate tabs with labels specific to that test, such as test #, etc.)
Any ideas on how this may (or may not) be done?

Hi SethRow187,
Let's take this one step at a time, starting with the one REPORT sheet per Data Portal Group request. This is something that I do all the time, and I have developed lots of standard functions that I can re-use quickly and easily. DIAdem has the basic functions which enable this, but it takes quite a few commands to get this to work the way you and I want with absolute control.
In the "Group Sheets General" example I'm attaching below, the same REPORT layout TDR file is loaded once for each Data Portal Group, and then subsequently altered programmatically so that all the Group references in the REPORT objects (graphs, tables, text boxes) are replaced with references to the current Group. This results in N REPORT sheets where each sheet has explicit references to a particular Group.
In the "Group Sheets Simple" example I'm attaching below, again the same REPORT layout TDR file is loaded once for each Data Portal Group, but in this case no further change is made to each REPORT sheet after it is loaded. This results in N REPORT sheets which are absolutely identical in content to each other and which all reference the default Group. They appear different when refreshed because in each sheet, under its "Settings>>Layout Setup>>Worksheet Parameters" dialog there is a command configured to run each time the sheet is refreshed-- this command uses the current REPORT sheet index to set the corresponding Group to be the default Group.
In both cases the name of the Group is used for the REPORT sheet, which is convenient in that both Group names and REPORT sheet names are required to be unique, but you could use the Group description or any other property instead as long as you ensure that it has not already been used to name a previous REPORT sheet.
I also have scripts to concatenate the contents of N Groups into a new Group, located at the top of the Data Portal, and this combined with the below attached applications would give you the lead off overview REPORT sheet you mentioned.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Group Sheets Examples.zip ‏58 KB

How do I add a new page dynamically base on the expendable text field?

Hi, All,
I've created a form with flow subform and expendable text fields. When the user fills out lengthy content, the form get cut off. Is there a way to dynamically add pages base on the content that user fills in the expendable text field?
Thanks,

May be you need check some things..
1) See if the form is saved as Dynamic PDF form.
2) The TextField should be set the "Expand to Fit" Check box checked in the Height property.
3) The subform that contains the TextField should set to Auto Fit for Height.
Thanks
Srini

Smartform dynamically add pages

Hi everybody,
I have a smartform regarding a company.For each company i have several locations and for each location i have a table with some informations that need to be displayed.
My problem is that i will never know how many locations a company will have,only until runtime when i read some tables.My problem is that i have to display the informations for a location on a different page,so that i have to dynamically add pages in the smartform depending on the number of locations,which will be always different.
Does anybody know how i can do this?
thanx

Hi,
you have to add an extra page in which the data is printed you want.
You have to print this in the MAIN window.
In the MAIN window build in a loop (by loop or TABLE).
Do this at the end of MAIN window.
Inside this loop is the first thing a COMMAND (flow logic)
In this COMMAND your call your next page.
After that print and fill your variables.
succes.
Gr., Frank

Acrobat XI Pro - can't add pages :(

I was using Acrobat 9 Pro - I could add pages easily. With XI - it hangs or crashes just before the screen "add pages before or after" - it's driving me mad - might uninstall it and go back to 9 which was quite stable. Lots of other new features/layouts I hate. Especially the small space available for tools you use regularly

You will need to get LiveCycle Designer, which is now a separate product.
XFA forms created with LiveCycle Designer can be either static or dynamic. Static ones are very similar to forms created in Acrobat (AcroForms) in their behavior. Dynamic forms can have auto-expnding text fields, rows added to and removed from tables, entire sections generated and removed at run time, and a number of other dynamic behavior. So which you choose really depends on what your needs are. Many static XFA forms could be created as AcroForms with no loss in functionality. A big downside to XFA forms nowadays is the lack of PDF viewers for mobile devices that support them. AcroForms have always had more support in general.
JavaScript is used in both XFA and AcroForms, but each has it's own object models. XFA forms also support FormCalc, which isn't a full blown programming language like JavaScript, but it does have a number of useful features.The types of controls are pretty much the same, though an XFA forms support an image field and a good number of 1D barcode types with bar code fields.

How to insert a page dynamically into a form

Good Morning,
We've used LiveCycle to create a very intricate work order for our service company. Although most work orders we create don't need additional documents (aside from the form itself), some do. For example, we may want to add a PDF coversheet to work orders for certain commercial accounts that have special billing instructions. At this time we will add pages to an existing work order through the following process:
Enter all data into the LiveCycle form
Print the form to PDF and save
Use the "Insert Page" feature to add the necessary page (these pages are templated for continuous use)
Resave the document
My goal is to find a solution that would allow the user to dynamically select/add the necessary pages to the work order during step one (entering data into the form). Then, when we print the work order to PDF the printed copy would include both the work order and whatever page was added. I hope my explanation makes sense. Is this possible in LiveCycle?

If your form is a dynamic PDF then adding or removing pages is not going to happen within Adobe Acrobat Pro or Reader. I am pretty sure you can only modify the layout of an XFA Livecycle PDF within Livecycle. However what I have done in the past is add in the necessary pages that a user may want, hide the pages from the layout and then with a button click or some other type of control, show the pages. Hope I am understanding you right.

How to render a JSP page dynamically with JSF controls ??

Hi All,
I am new to JAVA and JSF. I am recently started doing a web project. First we started using plain JSP and servlets and now we are going to use JSF.
Now I am facing one problem with JSF. In a JSP page, I am having a combobox and a div and when i am selecting a value from the combo box, the div should be filled with some controls(like text boxes and comboboxes, buttons, etc) according to the selection.
I have done this in plain JSP with the help of XML/XSLT, AJAX and JavaScript. i.e. XML contains the details of the controls and XSLT transformer will give me controls in a string format in the server, AJAX helps to retrieve it and I have to simply set the div.innerHTML property to that string. It is working fine.
Now with JSF, I need to add JSF controls into my XML file, and it inturn returns the corresponding string having JSF controls easily, but i could not set it directly to div's innerHTML as the String contains JSF controls (Moreover, these JSF controls are linked with JAVA beans).
Is there any provision to add JSF controls to a running page dynamically or is there any provision to convert the above mentioned string of JSF controls to normal HTML controls like the JSF taglibraries doing.??
thanks in advance
noushad
Edited by: naash007 on Apr 20, 2009 4:17 AM
Edited by: naash007 on Apr 20, 2009 5:45 AM

That's simply asking for trouble. Do not suggest to use JSTL in combination with JSF.
JSF already provides almost everything which the JSTL flow control tags provides in flavour of the 'rendered' attribute.

Adding Pages Dynamically

I want to be able to add a Page dynamically to a Book.
In the Portal JavaDocs, there is a method called addPage() which is part of
the following class :-
com.bea.netuix.servlets.controls.page.Book
Problem is, this class doesn't seem to exist ?
Anyone have any ideas on this ?
Thanks

Maybe I'm missing something but I was under the impression that a .Portal
file is in fact a Desktop ?
"Chris Jolley" <[email protected]> wrote in message
news:[email protected]...
>
I assume you are using a desktop and not a .portal file...
You can add a page to a book via two ways - depanding an what you want yououtcome
to be
If you are an Admin and want to add it to a book in the Library (outsidethe context
of a desktop) and want it to effect all desktops that include this bookthen you
want the follwoing method on BookDefinitionManager:
* <p>Add a Navigable definition (BookDefinition or PageDefinition) toan
existing BookDefinition.
* @param customizationContext customization information such asprefered
locales and desktopInstanceId
* @param bookDefinitionId the book definition to add the navigableto.
* @param navigableDefinitionId the definition id of the navigabledefintion
from which to add.
* @param position the position in the book (or menu) to insert thisnavigable
(starts with 0)
* @param alignment position the page from the left (top) or right(bottom)
* @return the Navigable instance which was created.
* @throws ObjectNotFoundException BookDefinitionId or theNavigableDefinitionId
are bogus.
* @throws NotEntitledException if the caller does not have therequired permissions
to delete this object.
* @throws IllegalDependencyException adding the Navigable to theBookDefinition
would cause a recursive dependancy
* @throws DuplicateObjectException if this navigable is already addedto
this book
* @see com.bea.netuix.application.view.BookView#ALIGNMENT_LEFT
* @see com.bea.netuix.application.view.BookView#ALIGNMENT_RIGHT
public NavigableInstance addNavigable(CustomizationContextcustomizationContext,
BookDefinitionIdbookDefinitionId,
NavigableDefinitionIdnavigableDefinitionId,
int position,
int alignment,
boolean isDefault)
throws RemoteException, ObjectNotFoundException,NotEntitledException,
IllegalDependencyException, DuplicateObjectException;
If you are and end user or and admin and want to effect only the acertain desktop
then you want the following method on PortalCustomizationManager
* <p>Create an new instance of a <code>NavigableView</code> (BookViewor PageView)
from the supplied
* NavigableDefinition object.</p>
* @param desktopDefinitionId the desktop context to which this updateapplies.
* @param bookInstanceId the book instance to add the navigable to.
* @param navigableDefinitionId the navigable defintion id from whichto create
the instance.
* @param position the position in the book (or menu) to insert thisnavigable
(starts with 0)
* @param align position the page from the left (top) or right (bottom)
* @return the NavigableView instance which was created.
* @throws ObjectNotFoundException BookDefinitionId or theNavigableDefinition
are bogus.
* @throws IllegalDependencyException adding the Navigable to theBookInstance
would cause a recursive dependancy
* @throws MissingDataException missing vital data in theNavigableDefinition.
* @throws NotEntitledException if the caller does not have therequired permissions
to delete this object.
public NavigableInstance addNavigable(CustomizationContextcustomizationContext,
DesktopDefinitionId desktopDefinitionId,
BookInstanceId bookInstanceId,
NavigableDefinitionIdnavigableDefinitionId,
int position,
int align)
throws RemoteException, ObjectNotFoundException,MissingDataException,
NotEntitledException, IllegalDependencyException;
Note: If you are and Admin and want to efffect all users try
setting your visitormode to false on your CustomizationContext.
customizationContext.setVisitorMode(false);
Also: if you are doing this from a backing file and you want the change totake
effect for that request you will need to do a redirect back to the portal,otherwise
you wont see the change until the next request
"Priya" <[email protected]> wrote:
I want to be able to add a Page dynamically to a Book.
In the Portal JavaDocs, there is a method called addPage() which is part
of
the following class :-
com.bea.netuix.servlets.controls.page.Book
Problem is, this class doesn't seem to exist ?
Anyone have any ideas on this ?
Thanks

JSF 1.1 Custom ViewHandler to add Components dynamically

Hi,
I need to add UIComponents dynamically on each JSF view.
Using JSF 1.2, i can write a custom ViewHandler and override createView, like :
    public UIViewRoot createView(FacesContext facesContext, String viewName) {
        UIViewRoot viewRoot = baseViewHandler.createView(facesContext, viewName);
        UIComponent component = facesContext.getApplication().createComponent( HtmlInputText.COMPONENT_TYPE );
        HtmlInputText hidden = ( HtmlInputText ) component;
        hidden.setId("myID");
        hidden.setValue("myValue");
        viewRoot.getChildren().add( component );
        DebugUtil.printTree( viewRoot, System.out );
        return viewRoot;
    }But with JSF 1.1, and deploying the webapp on OC4J 10.1.3.3.0, my dynamic component (the hidden field) is not rendered..
NB : the dynamically added component is not rendered but it is listed by DebugUtil.printTree( )
The printTree output looks like :
08/11/25 19:47:47 id:null
value= null
id:eventlist
value= WWFWhy is the ViewHandler's behavior different between JSF 1.1 and 1.2 ?
How can i achieve dynamic component addition (for all pages) with JSF *1.1* ?
Thank you for your answers.
Edited by: ju_l_ien on Nov 25, 2008 11:58 AM

Hi All,
We don't want to use BOM options.
I have also checked "No. of packages'` at header level but my requirement is at item level.So we are also exploring the option of APPEND standard table and add this field.
Kindly let me know if we can do it without Appending standard table.
Regards,
Field to add to enter number of items which are shipped to customer

Add page numbers to a document in Pages

How do I add page numbers to a document in Pages on the iPhone?

When I tap the spanner I don't see Document set up.
I see this:

How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

Click at bottom of the first page:
Menu > Insert > Section break
Click somewhere in the 2nd page (not the header/footer)
Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
Click into the header or footer of the second page:
Menu > Insert > Auto Page Numbers…
If there is anything in the header or footer on the first page that you don't want just select it and delete it.
If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
Peter

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

How to add page numbers to a PDF in Adobe but maintain the ability to convert to a PDF/A

I have an PDF in adobe that I am able to convert into an adobe PDF/A document. However, when I use the header/footer option to add page numbers to the document it is no longer able to convert to a PDF/A document. How can I add page numbers and still be able to convert the document to a PDF/A?

The report says:
Fixups
Convert to PDF/A-1a (1 object)
Make document XMP Metadata compliant with PDF/A-1 (77 objects)
Flatten transparency (high resolution) (1 object)
Discard hidden layer content and flatten visible layers (1 object)
Remove document structure compression (1 object)
Remove document structure compression (1 object)
Recompress LZW as ZIP (1 object)
Convert color to sRGB (486124 objects)
Results (Summary)
Error
Layers used
Marked entry in MarkInfo not set to true
TrueType font has differences to standard encodings but is not a symbolic font (313 matches on 313 pages)
When you look at the specific comments on the pages the page numbers are highlighted and they specific comment is: (on per each page number. the page numbers start on page 27)
TrueType font has differences to standard encodings but is not a symbolic font
Page 27: Arial 12.0 pt TrueType embedded RGB (ICC) (0.0/0.0/0.0) overprint: off
Some PDF-based ISO standards require that a TrueType font must not define any differences from standard encodings (e.g. MacRoman or WinAnsii) if it is not a symbolic font.

How to add page numbers in Numbers?

How to add page numbers in Numbers?
Is there a simple way like in Excel? Thanks.

In Numbers '09, use Insert > Page Number
Place the page number in a page header, and it will appear on each age when in Print View and when the file is prnted.
May have changed in Numbers 3 (current version).
Regards,
Barry

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

Add pages dynamically to adobeform

Similar Messages

Maybe you are looking for