Add pages programmatically

hello,
any one know, how to add tab pages in a tab control programmatically, at run time.
regards.
Hugo

Hugo
This has been asked before in this thread http://forums.ni.com/ni/board/message?board.id=170&message.id=133269&view=by_date_ascending&page=1
David

Similar Messages

  • Tab Controls - Adding a page programmatically?

    It's probably not possible from what I've read on this forum, but I would really like to be able to add tabs
    programmatically (v6.0.2). But, having just read that they are like enums and are read only (can't change
    page names) it looks like this is going to be an unfulfilled desire.
    Though what I want to do can probably be done easily enough using hidden tabs it's annoying to not be able
    to control the order of the tabs nor the text. I don't want to have anything on the pages but just want
    to have the tab control there for switching between what is displayed in another control.
    Thanks,
    Naveen

    No, unfortunately, you cannot add pages programmatically to a tab control. The best you can do is add as many pages as you would ever possibly want at run time when you are building your tab control. Then use the visible property for the pages to determine how many are displayed at any time.
    Matt Kisler
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Create a page programmatically

    This might be a silly question.
    Looking at the JSF 1.1_01 API, I don't see methods supporting creating pages programmatically. For example, I would expect the UIForm class to have something like an addChild method.
    Does this mean JSF does not intend to support creating a page programatically?

    The trick is
    UIComponent.getChildren().add(UIComponent)That does seem like a solution or more accurately workaround. Look at the notes for the List returned by UIComponent.getChildren() such as
    # Any attempt to add an object that does not implement UIComponent must throw a ClassCastException.
    # Whenever a new child component is added, the parent property of the child must be set to this component instance. If the parent property of the child was already non-null, the child must first be removed from its previous parent (where it may have been either a child or a facet).
    Wouldn't it be much nicer if an addChild method is provided (say in UIComponentBase class) to do all this?
    Anyway, thanks for the quick response.

  • Adding Custom Webpart (Sandbox) to a page programmatically using CSOM

    I'm trying to add a webpart(sandboxed) to a page programmatically using CSOM.
    I've created a simple windows forms application and tried the below, it gives me error
    Error: "A first chance exception of type 'Microsoft.SharePoint.Client.ServerException'
    occurred in Microsoft.SharePoint.Client.Runtime.dll"- Server Exception occurred.
    Additional Information: Cannot Import this webpart "
    using (ClientContext context = new ClientContext("URL"))
    Web web = context.Web;
    File file = web.GetFileByServerRelativeUrl("/SitePages/Test.aspx");
    LimitedWebPartManager wpMgr = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
    string webpartxml = "<?xml version=\"1.0\" encoding=\"utf-8\"?>" +
    "<webParts>" +
    "<webPart xmlns='http://schemas.microsoft.com/WebPart/v3'>" +
    "<metaData>" +
    "<type name=\"CustomVisualWebPartProject.VisualWebPart1.VisualWebPart1, CustomVisualWebPartProject, Version=1.0.0.0, Culture=neutral, PublicKeyToken=28942db35e131a1c\" />" +
    "<importErrorMessage>Cannot Import this webpart</importErrorMessage>" +
    "</metaData>"+
    "<data>"+
    "<properties>"+
    "<property name=\"Title\" type=\"string\">CustomVisualWebPartProject - VisualWebPart1</property> "+
    "<property name=\"Description\" type=\"string\">My Visual Web Part</property>" +
    "<property name=\"ChromeType\" type=\"chrometype\">None</property>" +
    "</properties>" +
    "</data>" +
    "</webPart></webParts>";
    WebPartDefinition webPartDef = wpMgr.ImportWebPart(webpartxml);
    wpMgr.AddWebPart(webPartDef.WebPart, "Left", 1);
    context.ExecuteQuery();
    Kindly let me know how to resolve it.
    Thanks,
    Pandiarajan

    Hi,
    I have the same issue with you, I also cannot add visual Webpart (Sandbox) to a page using CSOM,but I can add farm solution web part using CSOM, so I change it to farm solution web part.

  • Add page numbers to a document in Pages

    How do I add page numbers to a document in Pages on the iPhone?

    When I tap the spanner I don't see Document set up.
    I see this:

  • How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

    How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

    Click at bottom of the first page:
    Menu > Insert > Section break
    Click somewhere in the 2nd page (not the header/footer)
    Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
    Click into the header or footer of the second page:
    Menu > Insert > Auto Page Numbers…
    If there is anything in the header or footer on the first page that you don't want just select it and delete it.
    If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
    Peter

  • ? how to add page numbers in pages 5.2, starting with 2.  Pages '09 had an option to not show folio on page one.  Also any how to do left and right folios for a Tabloid?  Many trhanks

    ? how to add page numbers in pages 5.2, starting with page 2.  Pages '09 had an option to not show folio on page one.  Also any idea how to do left and right folios for a Tabloid?  Many thanks  . . .

    Hello jacquemac,
    Your first question:
    There might be a better way of achieving what you wish to do, but following these steps could help you out.
    You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
    1. go for Documents (right end of the Toolbar) -> Section
    2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
    (what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
    3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
    4. click on your second page (the first page of your second section) and  "Insert page number" -> start at 1
    Your second question:
    Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
    greetings jl

  • How to add page numbers to a PDF in Adobe but maintain the ability to convert to a PDF/A

    I have an PDF in adobe that I am able to convert into an adobe PDF/A document. However, when I use the header/footer option to add page numbers to the document it is no longer able to convert to a PDF/A document. How can I add page numbers and still be able to convert the document to a PDF/A?

    The report says:
    Fixups
    Convert to PDF/A-1a (1 object)
    Make document XMP Metadata compliant with PDF/A-1 (77 objects)
    Flatten transparency (high resolution) (1 object)
    Discard hidden layer content and flatten visible layers (1 object)
    Remove document structure compression (1 object)
    Remove document structure compression (1 object)
    Recompress LZW as ZIP (1 object)
    Convert color to sRGB (486124 objects)
    Results (Summary)
    Error
    Layers used
    Marked entry in MarkInfo not set to true
    TrueType font has differences to standard encodings but is not a symbolic font (313 matches on 313 pages)
    When you look at the specific comments on the pages the page numbers are highlighted and they specific comment is: (on per each page number. the page numbers start on page 27)
    TrueType font has differences to standard encodings but is not a symbolic font
    Page 27: Arial 12.0 pt TrueType embedded RGB (ICC) (0.0/0.0/0.0)  overprint: off
    Some PDF-based ISO standards require that a TrueType font must not define any differences from standard encodings (e.g. MacRoman or WinAnsii) if it is not a symbolic font.

  • How to add page numbers in Numbers?

    How to add page numbers in Numbers?
    Is there a simple way like in Excel? Thanks.

    In Numbers '09, use Insert > Page Number
    Place the page number in a page header, and it will appear on each age when in Print View and when the file is prnted.
    May have changed in Numbers 3 (current version).
    Regards,
    Barry

  • I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

    I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do not have this same problem. When I replace our regular font (URW Grotesk) with a system font (Verdana) everyone is able to read the page numbers. This is a new issues, I have been creating these documents in the same way for years without a problem. I have been on hold and on and off calls for the last two hours, I keep getting hung up on once I find someone in adobe support to talk to!

    Hi KnoopL,
    Are the Mac users using Preview to view the pdfs or Adobe Reader?
    Regards,
    Rave

  • How do I add page numbers on a Pages doc.?

    How do I add page numbers on a pages doc.?

    It won't work in Layout mode documents but in Word Processor documents:
    1. Add a Textbox and move it to the top right, turn off Textwrap
    2. Insert a page number in the box
    3. Select the Textbox: Menu > Arrange > Section Master > Move Objects to Section Master/Make Master Objects Selectable
    4. Insert a Section Break on each page. It has to be a Section break otherwise editing the Master Objects will repeat on previous pages.
    Peter

  • How to add pages in Dreamweaver without opening new file??

    Hey there everyone
    I just wanted to know if and how i could add pages in Dreamweaver rather than having all different files.
    Thanks

    I want to have a main page which is used for every page but only slights differences are made i.e. there will b a box in the middle which will change as pages change. and thats all, i don't want anything else 2 change.

  • How do I add page numbers to a document in Pages 5.2

    How do I add page numbers  to a document in Pages 5.2?   I'm sure there's some way to do this but it's less obvious than in the previous version of Pages.

    Click on one of the Header or Footer fields and you will get a pop-up asking if you want to add page numbers, and a choice of formats.
    You also may use Insert > Page Number.
    Jerry

  • Can users add page to pdf?

    Is it possible to have users add pages to a pdf as needed? We are having applicants fill in a pdf application. Some of them only need one copy of page 3 to tell us their work history, but some of them need 5 copies of page 3. Is it possible for the user to add more copies of a specific page as needed? The users will likely not have any sort of pdf software.

    Only if they have a copy of the full Acrobat and not Adobe Reader.
    You can use a hidden template to spawn new pages but only with Acrobat.
    If you use LiveCycle Designer, you can use master pages to add a new page.
    How are the canidates going to return the form or information back to you?

  • How do I add pages to a PDF in the iPad version of Acrobat reader

    How do I add pages to a PDF in the iPad version of Acrobat reader

    You don't.
    Adobe Reader is a reader application. You can't use it to do editing.
    If you have Adobe Acrobat on Mac or Windows, you can add pages.

Maybe you are looking for