Add Parent subscriber and rename channel...

Hi
Just wanted to check what effect the following actions would have on
existing distributions.
a) add in a parent subscriber - guessing that the cerificate of the PS
would need resolving to the existing subscribers, and that the PS would
need to pull the distributions from the distributor - hoping that the
existing subscribers would see that the actual ted is the same and do
nothing...?
b) rename channels - hoping this attribute change isn't seen as a
'configuration change' by the existing subscribers...?
Has anyone real world experience of these actions?
Many thanks
David

> a) add in a parent subscriber - guessing that the cerificate of the PS
> would need resolving to the existing subscribers, and that the PS would
> need to pull the distributions from the distributor - hoping that the
> existing subscribers would see that the actual ted is the same and do
> nothing...?
Indeed, the distributor will read the information about the parent
subscriber from e-directory and will send the workorder to the parent
including the routing info. With the routing info the Parent will need where
to forward the distributions. If the subscribers already have the
distributions, nothing will be send
> b) rename channels - hoping this attribute change isn't seen as a
> 'configuration change' by the existing subscribers...?
I never done channel re-names, but adding and/or deleting channels shouldn't
have an affect on the distributions
Ron

Similar Messages

  • Add Parent Folder missing?

    In the Lightroom 3 Library Module, there is an Add Parent Folder function. It appears no longer to be present in Lighrroom 4. Has it moved, or is there some new way of accomplishing this?

    hbortman wrote:
    Add Parent Folder, in LR3, creates a new folder, one that doesn't yet exist.
    No, I'm afraid it doesn't. I think you're a little confused between "Add Parent Folder"  and "Create New Folder".
    "Add Parent Folder" is an option available in the context menu when you right-click (Ctrl+Click) on the displayed top-level folder of a folder hierarchy, and causes the next level up to be displayed. For LR4 this has been renamed to "Show Parent Folder" (which is probably less confusing). The opposite of "Add Parent Folder" in LR3 is "Promote Sub-folders", which causes the particular top-level folder to be hidden (thus 'promoting' the next level down). For LR4 this has been renamed to "Hide this Parent".
    Adding a not-yet-existing-in-the-catalog folder via the Folders Panel is achieved by clicking on the '+' sign to the right of the Folders Panel header (which is labelled "Create New Folder" in the tool-tip) and choosing "Add Folder" or "Add Sub-Folder". For new folders this will result in a folder being added to the catalog with a zero photo count. Adding an already-existing folder which contains photos will cause the Import dialog to be presented.

  • All of a sudden, I can no longer add any plugins to any channel strips? And when I click on an existing plugin to edit, it disappears off the channel strip?

    I am running Logic express 9 on a 2008 Macbook, (non pro).  Anyhow, logic has always seemed to work great for me.  However, last week I opened up one of many existing projects, (I'm in sample editor).  When I went to add a new plugin to one of the channel strips it would not allow me to.  Also, if I click on any plugin that already exists on the channel strip it dissapears? The strange thing that also happens weather I click to add a new plugin or click on an already existing plugin, is both the  "repeat section" and "crop", buttons from the above menu (in sample editor), the actual buttons become a faded image,(as far as the actual font and images of the buttons).  As soon as I am done clicking to add a plugin on the channel strip, both buttons from the menu  go back to looking normal like all of the other choices from that menu?  I really don't get it?  All I want to do is to be able to add plugins as well as edit or change plugins again. Any thoughts as to why I can no longer add any new plugins to any channel strips?  And why any existing plugins disappear from the channel strip when I click on it?  Why the "repeat section", and "Crop", buttons from the menu above fade in and out when I try clicking on the channel strip is very strange? I don't mind that I just want to be able to add or edit plugins again.  I did do some document cleaning up last week as my memory was getting low.  I then emptied out my trash bin.  I'm hoping I didn't accidentally delete some kind of Logic component?  Why can't I add or edit plugins anymore?  Anyone ever run across this?
    Thanks,
    Mike.

    Mike,
    Are any of your other applications going wonky, or is it just Logic?
    I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer.  Then I would launch Logic and see if the problem has been corrected.  It's amazing how much these two steps can accomplish.
    If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

  • Programmatic, using bean add Parent and child nodes in af:tree dynamically

    Hi All,
    i have to add parent and child nodes dynamically in tree .
    Example :
    i have created a tree like below.On click of button i will get value A ,from pl/sql function i will A1 and A 2 values.which i have to show in pop as tree.
    A
    |-----A1
    |-----A2
    If user clicks on A2.I have to catch A2 value and pass to pl/sql function which gives A2.01 and A2.02 values.
    A
    |-----A1
    |-----A2
    |------A2.01
    |------A2.02.
    A, A1 ,A2,A2.01 ...........values comes from pl/sql funchtion .
    thanks in advance ......... any suggestion will greatly helps

    no use ......................

  • Add attributes and rename the attributes according to the need

    I am a new developer to jdev, I need more help.
    I design a salary db, the attributes are employee_id,employee_name,pay_type1,
    pay_type2,pay_type3,pay_type4,pay_type5,...
    Now salary kind is only pay_type1, so in view we only select emplyee_id,
    employee_name and pay_type1 from entity.
    After some time, company decide to add new salary kind, for example travelling allowance. After adding this new attribute name: trave_allowance, pay_type2 is selected form entity and renamed trave_allowance . From then on
    in browse.jsp employee_id, employee_name,pay_type1 and trave_allowance should
    been show.
    I think the new attribute names can be received from name_adding.jsp
    then according to the number of new name, we can select attributes from entity in view and replace attributes which are selected by new names.
    But I do not know how to pragramme.
    Please do give the detail or other design ideas.
    Thanks in advance!

    You can edit your VO and add additional attributes to it.
    If you have designed your JSP page to iterate over the attributes of the VO in a generic way, your page should immediately show the new attributes.
    If you have a JSP page that hard-codes references to your VO attributes, you'll need to add a few new tags to the page to see your new attributes.

  • Can't subscribe to YouTube channels (works in IE)

    I have 2 computers running Firefox (the latest, automatic updates) with AdBlockPlus and WebDev for addons.. Both computers I can't subscribe to Youtube channels. It does work fine in the latest IE. It worked fine last week. What could it be? I tried disabling ADP but issue still remains

    I am on windows 7 x64 with the latest Firefox (auto update). Either way my troubleshooting steps were:
    Manually disable all add-ons (web developer and abp) - Still an issue
    Then I discovered under Firefox Help "restart firefox with addons disabled" - Still an issue.
    3rd step - I uninstalled Firefox but retained the data - Problem still persisted
    Lastly - I uninstalled Firefox and removed all data = Problem SOLVED.
    My other computer fixed by itself. I am still not sure what was the issue and I am little bit hesitant to install WebDev and ABP.
    Just shows that most software problems can be fixed by reinstalling it.
    I am marking this as SOLVED.
    Thank You.

  • How to add new text and an empty space before a file name with Automator

    I can create a new service to add to multiple files some text before the file name but I need to add even an empty space; e.g. file name original  becomes: new text(space)file name original. The aim is to add this text and space to multiple files.
    I hope to be understood. Please can somebody help me?
    Thanks

    This is an old Apple-supplied AppleScript that will do the job.
    IMPORTANT: note the conditions of use: it will choose the frontmost Finder window to operate on. Therefore, open the folder you want to change the names of and make it the front finder window BEFORE running the script.
    Add to File Names
    This script is designed to add a prefix or suffix to files in the front window of the desktop.
    If no folder windows are open, the script will affect items on the desktop.
    Copyright © 2001–2007 Apple Inc.
    You may incorporate this Apple sample code into your program(s) without
    restriction.  This Apple sample code has been provided "AS IS" and the
    responsibility for its operation is yours.  You are not permitted to
    redistribute this Apple sample code as "Apple sample code" after having
    made changes.  If you're going to redistribute the code, we require
    that you make it clear that the code was descended from Apple sample
    code, but that you've made changes.
    --March 2014: Changes by Phil Stokes to make the script work on 10.9
    --these changes are simply reversing the order of parameters in the lines that have "copy" in them
    -- The following line is disabled due to a Menu Manager bug
    --set the source_folder to (choose folder with prompt "Pick the folder containing the files to rename:")
    try
              tell application "Finder" to set the source_folder to (folder of the front window) as alias
    on error -- no open folder windows
              set the source_folder to path to desktop folder as alias
    end try
    set the prefix_or_suffix to ""
    repeat
              display dialog "Enter the prefix or suffix to use:" default answer the prefix_or_suffix buttons {"Cancel", "Prefix", "Suffix"}
              copy the result as list to {button_pressed, prefix_or_suffix}
              if the prefix_or_suffix is not "" then exit repeat
    end repeat
    set the item_list to list folder source_folder without invisibles
    set source_folder to source_folder as string
    repeat with i from 1 to number of items in the item_list
              set this_item to item i of the item_list
              set this_item to (source_folder & this_item) as alias
              set this_info to info for this_item
              set the current_name to the name of this_info
              if folder of this_info is false and ¬
                        alias of this_info is false then
                        if the button_pressed is "Prefix" then
                                  set the new_file_name to the (the prefix_or_suffix & the current_name) as string
                        else
                                  set the new_file_name to the (the current_name & the prefix_or_suffix) as string
                        end if
                        my set_item_name(this_item, the new_file_name)
              end if
    end repeat
    beep 2
    on set_item_name(this_item, new_item_name)
              tell application "Finder"
      --activate
                        set the parent_container_path to (the container of this_item) as text
                        if not (exists item (the parent_container_path & new_item_name)) then
                                  try
                                            set the name of this_item to new_item_name
                                  on error the error_message number the error_number
                                            if the error_number is -59 then
                                                      set the error_message to "This name contains improper characters, such as a colon (:)."
                                            else --the suggested name is too long
                                                      set the error_message to error_message -- "The name is more than 31 characters long."
                                            end if
      --beep
                                            tell me to display dialog the error_message default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                                            copy the result as list to {button_pressed, new_item_name}
                                            if the button_pressed is "Skip" then return 0
                                            my set_item_name(this_item, new_item_name)
                                  end try
                        else --the name already exists
      --beep
                                  tell me to display dialog "This name is already taken, please rename." default answer new_item_name buttons {"Cancel", "Skip", "OK"} default button 3
                                  copy the result as list to {button_pressed, new_item_name}
                                  if the button_pressed is "Skip" then return 0
                                  my set_item_name(this_item, new_item_name)
                        end if
              end tell
    end set_item_name

  • How do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

    how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

    If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
    Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • ALV  List Layout add new button  and modify Append Row Button Text and Logi

    Hi All,
    I am working on Employee custom development Application in Webdynpro ABAP>
    In my ALV list Layout  I have to add new  two Buttons  Top or Bottom of the ALV List.
    If I am adding I have to add logic for those Buttons. How to add and add logic for those buttons.
    as well as I have to Change the  Text  for  Existing Button ''Append Row''    to  "ADD NEW ROWS"
    and I have to add logic in this button while Append New Row I have to generate ID no for New Rows .
    Kindly help/advice  me to proceed further.
    Thanks in advance.
    Dav

    Hi Dav,
    To Add buttons please refer this thred,
    ALV with user-defined buttons on toolbar in wd abap
    To change or rename text in ALV standard buttons, please refer this ...
    How can i change the text of an standard button in ALV?
    and also see this article on self defined functions...
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/101df93f-4b5c-2910-14aa-9eb0338c2110?quicklink=index&overridelayout=true
    Thanks,
    Kris.
    Edited by: kissnas on Feb 22, 2011 5:59 AM

  • Edit in Photoshop and Alpha Channel

    When I open an image in Photoshop using 'Open with External Editor', and add an alpha channel, when I save it back to Aperture the alpha mask shows on top of the image, whether or not it is made visible in Photoshop. Furthermore, the thumbnail shows the mask as white and the image shows the mask as black.
    Are others seeing this same behavior? Do I have a setting that is incorrect?

    Search the discussions on a couple of these terms -- there was a thread or two a couple of months ago.
    It turns out (I can't remember who pointe this out! sorry!) that if you put a completely blank alpha channel at the top of the stack of them (that is, under the R, G and B channels in the Channels palette), then save, the image shows up OK.

  • IChat, Parental Control and Bonjour

    Rather than using AIM (and it's slowness), I was hoping to be able to use Bonjour on our internal network (which is firewalled and, obviously, not a threat) to chat/audio conference with our youngest.
    I used the parental control to limit his AIM partners to the family but still wanted to allow him to talk on our network in the house. Unfortunately, when I go into iChat via his account the "using Bonjour instant messaging" is grayed out.
    I tried turning it on in iChat on his account, going to my admin account and THEN enabling parental control, and trying again but no dice.
    Any ideas?
    Sure would be nice for home networks to have the option to iChat with everyone at Bonjour vs. AIM speeds (doubly so if you are on dialup!).

    hi James,
    Well I read this and thought "he can't be right" ?
    So I went to test
    Enabled Parental Controls and for iChat and Added one AIM/@mac buddy.
    Looked for ability to add Bonjur or Jabber accounts but found nothing
    Went to log in to that account.
    Check to see if Bonjour window was available. Nope.
    Checked iChat Preferences >Accounts and could not select Bonjour.
    Took off Parental Controls - Appears in iChat, Bonjour and Jabber windows.
    Selecting and deselecting Parental Control Logs iChat in and out of AIM.
    I must admit to thinking this is a big Opps by Apple
    Ralph

  • Selecting all files from JFilechooser and renaming them??

    dear all
    i am working on a application that selects the jpeg,jpg,jpe files form the jfilechooser with an additonal botton rename which calls the rename method and the selected file is renamed.
    i have been succssful in mselecting one file and renaming it.but the problem is with...
    1) Selection of multiple files and sending their names and parent directories getParent(); is not working with taht....should i use arrays to store that .....but how when i have enabled multiple selection already.
    2)SEcond problem is to refersh the contents of JFileChooser after i have renamed it.iwant that it shopuld be refreshed automatically just after renaming has been done.
    help is always appreciated..
    regards
    s m sharma (trainee s/w/ engg)

    hi everybody
    i have done it myself.......it was not too tough that u didnot responed...anyway thanks..
    regards
    s m sharmna

  • Add anotehr subscriber ? Or dod I need to rebuild original queue table

    11.2 rdbms
    QUEUE to DBLINK PROPAGATION.
    I want to add another queue in remote side to read same messages from source.
    --------------------------------------> TARGETDB (QUEUE1)
    Source DB Message -------------------------------
    --------------------------------------> TARGETDB (QUEUE2)
    So any message thats enqueued in source is dequeued by both queues in destination ..... no impact on each other.
    any links ?
    Edited by: 957751 on Sep 7, 2012 12:52 PM

    Thanks
    So the source and destination queues are already multi consumer.
    So if I add another subscriber to the source queue - I dont need any code changed whilst enqueueing ?
    Just need to have the subscriber at the remote side dequeue. ?
    Also when I set it up from scratch - basically
    Add multiconsumer queue at source
    add two subscribers
    enqueue a message ......
    I didnt see any messages loaded in the AQ$ table under READY ....... although pl/sql call was successful
    thx

  • Add a tag and value to an XML document

    Hi there,
    Is it possible, indeed are there any functions that would help me, to add a tag onto an XML document that has been already created without having to use XSLT?
    Perhaps someone could advise a function?

    The only way in 9.2 is to use DBMS_XMLDOM package or to recreate the entire parent node and use updateXML(). 10g have some new features that are behind an event that allow these operations to be done directly in SQL.

  • Add milliseconds to a time channel entry

    I am having a problem trying to add milliseconds to a time channel entry.   Currently I am using the DateAdd Function but it does not work. 
    The millisecond range is in bold in the following text.
    07/01/2008 10:05:00.0000 ' I am getting this out
    07/01/2008 10:05:00.3000 ' I need this out
     The following script is an example of what I am trying to do
    dim MuteStartTime
    dim MuteDurTime
    dim mutestoptime
    MuteStartTime = Now  
    MuteDurTime   = ".3"
    MuteStopTime = DateAdd("s", MuteDurTime, MuteStartTime)  
    msgbox "(Start " & RTT(MuteStartTime) & ") + (Duration " & MuteDurTime & " Sec) = (Stop " & RTT(MuteStopTime)&")"
    BBANACKI

    Hello BBANACKI!
    The MS script documentation describes the second parameter as a long value and it will be converted to a long if it is not!
    IMHO it is not a god idea to mixup VBS and DIAdem Date/Time functions. You can do what you want verry easy with pure DIAdem functions. The code will demonstrate this:Option Explicit
    Dim MuteStartTime
    Dim MuteDurTime
    Dim MuteStopTime
    ' preset variables
    MuteStartTime = CurrDateTimeReal
    MuteDurTime = 0.3 '!!! no string!
    ' DIAdem Date/Time is a real with 1s accurancy
    MuteStopTime = MuteStartTime + MuteDurTime
    ' show result
    MsgBox "Start " & RTT(MuteStartTime) & " + (Duration " & MuteDurTime & " Sec) = (Stop " & RTT(MuteStopTime)&""
    Matthias
    Matthias Alleweldt
    Project Engineer / Projektingenieur
    Twigeater?  

Maybe you are looking for