Add plain text files or notes to ipod 4th generation??

I was wondering how to add plain text files or "notes" to my ipod. It says I should have a "Notes" tab on my iTunes, but I don't. I've tried enabling the disk use but it didn't change anything. What I need is to add some word files onto my ipod if thats possible.
THANKS
Sarah

I haven't tested myself but after you open disk space you drag the file into your ipod?

Similar Messages

  • Can not restore Ipod 4th generation

    Last night I updated my Ipod software and was syncing it through Itunes. When I returned I discovered my Ipod went into recovery mode. When I tried to restore my device it indicates error code 1604. I tried troubleshooting error code 1640 and still could not get my Ipod to recover and it is not recognized in Itunes. My husband's ipod syncs up and is just fine when we use the same computer and USB cord. Any suggestions!?!!!!!!!!!

    Did you try everything here:
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    From:
    http://support.apple.com/kb/TS3694

  • Importing Text Files  into Notes

    Having trouble reading imported text. I have IPod nano 3rd gen. It is checked to enable disc use. When I drop a .txt file into notes folder, then eject IPod, I can see the document titles in IPod/notes however, text displays as code (alot of 0's &1's and other garbled letters). Does anyone know why this happens and how I can solve this? I would greatly appreciate any suggestions.
    Thanks

    The files MUST be plain text files (possible sich text format as well) but not Word Documents and stuff like that. Simply taking a Word document and changing the extension from .doc to .txt won't do it for you, if that is what you tried.
    Patrick

  • Are plain text files treated differently in SP 2010 than MOSS 2007?

    We just moved to SP 2010 a week ago.  A user just contacted us asking why the files she accesses are not displaying.
    When she accessed these plain text files in MOSS 2007, they displayed within IE as a full page of text.
    When she accesses these now in SP 2010, she is prompted to download the file.
    These files do not end in .txt - they are names such as 2013.09.20 or whatever.
    Is there a way to configure 2010 to display, without any interpretation, plain text files within the browser?
    Thank you.

    Hi ,
    According to your description, my understanding is that you could not access the txt files with browser after migrading to SharePoint 2010..
    Whether this issue occurred if you upload a new txt file to a library.
    In my testing, everything worked well. The Open Documents in Client Applications by Default feature was acitve, and in the Library Settings->Advanced settings, ‘Use the server default(Open in the client application)’ was selected. When I clicked the file
    name, it promted a dialog like the below, I selected ‘Read-Only’, and clicked OK, the file could open with browser.
    Please go to IE->Tools->Internet Options->Programs->Manage add-ons, enable all add-ons related to SharePoint, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to load data in plain-text file into database by using EJB?

    Hi,
    We need to develop an on-line application which requires us to load input data
    from a selected plain-text file on the Web server (iplanet server) into the backend
    oracle database. How could I use EJB to make it happen? it seems like using Entity
    EJB is not feasible.
    Really appreciate your help!
    Corona

    Hi Corona,
    "Corona Fang" <[email protected]> wrote in message
    news:3f3b0ea3$[email protected]..
    We need to develop an on-line application which requires us to load inputdata
    from a selected plain-text file on the Web server (iplanet server) intothe backend
    oracle database. How could I use EJB to make it happen? it seems likeusing Entity
    EJB is not feasible.If you are talking about loading thousands of records,
    the preferable way is using plain JDBC calls utilizing
    batch methods.
    Regards,
    Slava Imeshev

  • Save results of javascript operation to a plain text file

    Hi,
    How do you save to a file using Acrobat javascript? Not a PDF file - I know how to do that - but to a plain text file.
    I have javascript that searches through a PDF document and generates some output. I can send the output to a Report (in PDF format, obviously) or to the console, but I can't see how to send it to a plain text file, which is what I need.
    Any assistance gratefully appreciated.
    Thanks,
    Tim.

    Ah, great, yes that seems to do what I want.
    However, I get an error ...
    My code is as follows:
    function CreateOutput()
         // assembles text and puts it into the variable: output
         // e.g.:
         output = "Hello, world";
    var output = "";
    CreateOutput();
    this.createDataObject("testfile.txt", output);
    Unfortunately I get this error and I don't understand it!
    InvalidGetError: Get not possible, invalid or unknown.
    Doc.pageNum:6:Batch undefined:Exec
    Obviously I'm doing somethign wrong ... but what?
    Thanks very much,
    Tim.

  • PI removing blank spaces at the end of the lines in a plain text file

    Hi -
    I have an interface that transfers a file via FTP. I defined both the sender and receiver to transfer either Text or Binary but the interface removes every blank space I have after the last character. The file is a fixed lenght file.
    Example:
    Original file:
    Hello world(space)(space)(space)(space)(space)(space)(space)(space)(eol)
    where (space) is the space character and (eol) is the end of line char.
    File after it is received.
    Hello world(eol)
    I already defined the parameter Row.fieldFixedLenghts with 10164 which is the lenght of the lines of the file.
    Any ideas why it may be happening?
    Thanks,
    Carlos.

    Hi -
    I tried both the parameters:
    xml.fieldContentFormatting
    structure.fieldContentFormatting
    The received file still has the problem. All the blank spaces are cleared out.
    The file is a plain text file not an XML file. May this be the issue?
    Thanks,
    Carlos.

  • TextEdit - Plain Text Files That Open In Windows?

    Hi. Just got an iMac. I've been trying to make plain text files in TextEdit that show up correctly in Windows on a PC. I've tried saving the same document in 4 different formats:
    - Plan Text Unicode (UTF-8)
    - Plain Text Unicode (UTF-16)
    - Plain Text Western (Mac OS Roman)
    - Plain Text Western (Windows Latin 1)
    But none of these look right on a PC. All of the line breaks I've entered show up replaced by black rectangles. Why is this?
    What format should I save as in TextEdit, to create Plain Text files that are compatible with both PC and Macs?

    First, note that TextEdit does not create plain text files, it creates rich text files (.rtf). If you truly want plain text, try the free TextWrangler:
    http://www.barebones.com/
    As to the line break problem, Macs use just a carriage return as the end-of-line character, while Windows uses a carriage return followed by a line break character. At least, that's how I understand it. Most likely, whatever app you're using on Windows is dumb enough that it can't figure out what to do with the Mac line endings. TextWrangler will let you change the line breaks, so you could use it to create plain text files with Windows line breaks. Of course, that doesn't help if you didn't really want plain text (ie, absolutely no styling, just raw text).

  • Plain text files appeared from nowhere in my finder window

    I have a whole bunch of plain text files that have appeared in my finder window when searching in my user profile at the stage where I can view documents, desktop, music etc [sorry not sure what this is called and wanted to make obvious what I'm talking about].
    Can anyone help. I have no idea what these files are, but they look empty.
    Have I hit a view hidden files button somewhere that I can't find again? Can I just delete them all?
    Thanks for the help, this forum has been very useful for a number of things!
    Nick

    Hi nick,
    You have navigated to your home folder. (/Drive/Users/shortname/)
    Some programs will automatically save files there. You can delete them if you want but that may destroy settings in the app that put them there. How long was it since you last viewed the visible files in your home directory? Have you installed any new programs since then? What are the names of the files and can you infer from them where they came from? You can always try moving the files to another folder (without deleting them) and then see if you are suddenly missing any settings in a new app or if they are replaced. Might help you figure out who is putting them there.
    Hope that helps.
    edit: There is no view hidden files button unless you installed a program which specifically makes them viewable, or were playing around in terminal I suppose.
    Message was edited by: taylor.henderson

  • How do you add plain text?

    Hi all!
    I have a very simple question, which is just what it says in the subject line of this topic.
    How do I add plain text into iMovie? No fades, no slides, no nothing, just plain text?
    From what I've been searching online, no one has answered this question, but then again, no one has asked it either.
    All I could find was 1 yahoo thread with the question in which the answer was not clear at all.
    I've been trying to find it myself by snooping around in iMovie, but as you might guess, unsuccessfully.
    From snooping around I've come to draw the conclusion that you probably can't add plain text into iMovie via iMovie directly.
    However, and idea I had was, if I create an image in, lets say Paint 2, with whatever plain text I want to add, and then insert it into the project. Will this have the same effect?
    Can anyone please confirm this? I'm going crazy just looking for such a simple feature hehehe.
    Thank you in advance!
    //cez

    hmm, well ... a video isn't meant for reading (resolution, compression, blabla). ...
    so 'text' in a video should be very large in font, avoid tiny details, too much contrasts ... blabla again
    Advice using the Title-feature as 'text' isn't wrong.
    plus, iMovie is no text-processor, you copy/paste larger amounts of letters into it.
    If you need/want 'a page full of text' in iMovie, indeed you have to do the roundtrip by creating a 'picture' of your text-page, and insert that jpg to your Project.
    The good news:
    if your 'picture (=text page) is longer than the video screen, you can apply a nice Ken Burns effect to 'scroll' through the text ... in case, your audience reads as fast as you.
    bad news: max is 5:1 ratio of the 'page' ... so, no 'books' please ...
    Aside Star Wars ("... in a galaxy far, far away from here"), you should avoid 'text' longer than a usual title.
    (this answer/workaround isn't in the 'canned' replies of our hosts, you should forgive'em ... )

  • Boot Camp Update 2.1: plain text file?

    Hi,
    in order to install the Service Pack 3 in my Windows XP partition, Apple recommends to upgrade the Boot Camp to version 2.1.
    I downloaded the BCUpdateXP.exe but it is label by Mac as "plain text" file, so I'm not able to run it and I don't know how to install the upgrade.
    What should I do?
    Thanks!

    Can you confirm with us that you have Boot Camp version 2.0 installed currently? This is because boot camp version 2.1 will ONLY install on if the previous version (2.0) is already installed.
    If your current version is not 2.0 then please insert the leopard installation disk in your CD/DVD drive while booted into Windows. This will begin installation of the 2.0 boot camp drivers. Reboot once completed. After that you can install the boot camp 2.1 drivers and it should install and complete.
    Axel F.

  • What happened to importing plain text files in iTunes?

    I used to be able to export the playlist containing all the music I wanted to listen to as a plain text file. I would then import this file into a spread sheet, sort as I desired, assign each song a number, sort on that number and save the resulting groups to plain text files. I would then import these text files as playlists. It appears that this capability has disappeared in the current version of iTunes. I am capable of working with the xml if I have to, but that is more effort than I think is necessary. Have I missed something?

    I have been thinking about what you are suggesting and even with your last reply it does not solve the problem. I suspect you still do not see what I am driving towards. I have playlists for all songs with 5 starts, all songs with 4 stars, all songs with number of plays less than n. I also have playlists of those three that have not been played in n days. I listen to those sometimes. I also listen to my existing playlists which contain subsets all music not christmas and have at least a 3 start rating. This last set is not smart at present. With the current setup, music in those first 3 playlists get played more often. Any smart playlist that has to include not played in the last x will not play those songs more often unless I play those playlists more often. At present, to generate those non smart playlists I export, divide, and import information. Apple has changed the format it accepts on input. I either have to accept their new import method and start programming, or find a smart playlist method that solves this problem. I do not believe that anything yet suggested for smart solves the problem. The closest I have come is 3 playlists. One smart and two dumb. The smart one is all songs with rating above 3 and not christmas that have not been played in last x and is not in the two dumb ones and limit to 100. The dumb ones start empty. Let it populate, drag the list to one of the dumb ones. Let the smart one recompute. Drag it to the second dumb one. Play one list on each device. When playlist finishes, blank the dumb one for that device, sync, let iTunes repopulate the smart list, drag to dumb list and sync again. In the long term, I think I am better off programming.

  • [SOLVED] Thunar sees both '.doc' and '.txt' as plain text files...

    Hello,
    I'm using Thunar as my file manager. However, it sees both '.doc' and '.txt' files as "plain text files".
    This means that I can't make the .doc files open with OpenOffice and the .txt files open with a plaintext editor, because whenever I change the program association of one, the other changes.
    How to fix that? (looks like a MIME-type issue).
    Thanks.
    Last edited by Renan Birck (2009-08-14 15:57:05)

    DaVince wrote:Open /usr/share/mime/globs and /usr/share/mime/globs2, find the lines that assign *.doc to the plaintext mime type, and remove them. Restart Thunar, problem solved.
    Finally it works. Thanks!

  • 'Plain text' files taking up 12gb

    Hi,
    I'm hoping someone can help me. I've recently been getting warnings that my start up disc is almost full. So I moved many photos and music files to an external HD and managed to free up 20gb.
    I then ran 'disc inventory' which showed that next to iTunes and movie files, 'plain text' files, 27,000 of them were taking up 12gb and 65,000 documents 11gb.
    Can someone please tell me where these files will be found on my mac as they need to be sorted - I've read that this could be a virus but what is the best way of combating this?
    There is no way I have this many files or documents and need to know how they are being stored!
    Thanks everyone

    bump

  • How do I convert batch convert text files to Notes in Mail?

    I have a bunch of text files (originating from Mark/Space Memopad, put exported as text files) that I want to turn into Notes in Mail. (Eventual goal: having sync-able memos 'tweeen Mac and iPhone.) So, how do I turn text files into Notes. I know the basic idea: change the extension to emlx (easy), give them a nice sequence of distinct names (182342.elml, 182343.emlx...)(Thank you Name Mangler). The hard part is sticking the header material in. If it were just one or two or three or even ten files, I'd just do it by hand (make a new note, cut and paste, repeat). But it's 250+.

    have you tried typing this question into your preferred search engine?  If not, please do, as you will find the answer there.

Maybe you are looking for