Add printer driver

I've installed 10.5.1 but I erased my printer driver by mistake. How do I just add the driver from my Leopard DVD without adding any "Essential System Software" as shown after clicking on: "Customize?" It appears as if I will install all 5.9 GB of "Essential..." when all I want to add is a printer driver. Of course, that "Essential..." is also 10.5, not 10.5.1

The easiest thing would be to download the specific driver from your printer manufacturer's web site. You could use Pacifist to view and extract the particular printer driver from your Mac OS install/restore DVD, but this is a bit more labor intensive. Without Pacifist, or a similar program, there is no way to extract and install a specific driver from the Mac OS install/restore DVD, and therefore you would have to install all the printer drivers for your printer's manufacturer.
Joe

Similar Messages

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Can't add printer driver for Deskjet 1010 on Mac OS 10.9.5

I have installed the printer driver on my Mac Mini running 10.7.5 with almost no issue (well, one of the first printouts actually crahsed Preview, but that was only once and might be another issue) and it print well and fast. But now I try to add this printer to my MB Pro running 10.9.5 and it always croaks that the software can't currently be loaded from the server (since 2 days now).
I guess it means my Mac Mini which likely only has drivers for the oder OS X. I also tried to install the drivers directly (downloaded from Apple's support pages) but still to no avail. I always get that ghastly message.
This question was solved.
View Solution.

I said (or meant) that I plugged the printer in the USB port of my MacBook. This made OSX to install the appropriate drvers. I think I also used the supplied CD with HP drivers to complete the installation. I'm pretty sure you can find the driver itself somewhere on a HP site for download. Sorry, but I have no idea where. I just remember searchng for drivers in the past. And most times it was a PITA :-(

Adobe Pdf Converter Print Driver Will not install

Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > Set

I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

How do I add a Printer Driver to the Driver List??

Im trying to add my printer to a WGPS606 Netgear Print server. So Im adding a Printer to print via LPD IP printing, but My Canon iP4200 is not listed as one of the canon printers in the "Print Using" driver list.
I have been to the Canon site and can only seem to download a Pkg driver file (which I have run).
If I use the "other" setting in the "print using" driver list surely I can add the iP4200 if I had the right driver file.....? How do I get hold of the right file to add it to the list or am I missing the point of adding a print driver to the pre-installed list????

I have read my list through and through but no sign
of Designjet 900. (now slightly cross-eyed). If you
get a chance to look through the list on your mac
when you're reunited, I would be grateful!
The latest version of the Gutenprint/Gimp-Print drivers does not have a generic DeskJet Series 900 PPD. It lists individual printers in the 900 range. The Gimp-Print v4.2.7 driver package did have a generic DeskJet Series 900 PPD. Somewhere in between, there was a change over to model specific PPDs.
Crispian, your original request for a driver for an HP printer was for the HP Deskjet 9800. Gutenprint/Gimp-Print does not support that printer. The hpijs drivers do support that printer. If that is not the printer you have, please specify again which printer you have. There has been mention of the DeskJet 9800, DeskJet 900, and DesignJet 900 in this thread.
Matt
Mac Mini G4; B&W G3/300

Canon LBP6000 print driver - no printer appears in the 'add printer' section' I have installed Mac CAPT Ve r340 and nothing shows.r

I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop.
I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options. So very open to advice.
Thanks
T.

The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

Canon ir c3380 driver doesn't show up in "Add printer"

After installing Mac OS X v10.6. My Canon IR C3380 no longer shows up. I've uninstalled all previous canon drivers per PAHU's direction and installed the latest driver found on Canon's website UFRII_v2.21. Still no luck when I try to add the printer. There's a list of canon drivers that shows up "add printer" dialog box, but the 3380 is not part of that list. Thanks in advance for any input and help!

Hello Ben,
Based on your posting I believe that you are expecting to see the iR C3380 in the Default Add Printer view. This will not occur with OS X 10.6 because the AppleTalk protocol, which was responsible for making the printer appear in the Default view, is no longer supported on OS X 10.6.
So to add the iR C3380 on OS X 10.6 you will need to use the IP > LPD protocol. This means that the iR C3380 will need to have a valid IP address registered for your network. If you know the IP address then you can add the queue by selecting the IP icon and then changing the menu to LPD. You can then enter the IP address of the iR C3380, leave the queue name blank and then in the Print Using menu, select the "Canon iR C2880/C3380 UFR II (UK)".

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

Add new printer driver

Hi,
We need to add new printer driver in SAP application server , how to add new driver?
Actually we have some graphics and fonts which is not supporing SAPWIN .we have different printers ,these printers I could not see in SPAD .
I foung many notes which did not help me . Can you please suggest step by step how to add new driver.
Please dont suggest help.sap.com , It will not help me .
- Lisa

First, you need to download the sap driver of your printer model from the manufacturers websites, usually the file has an extension *.pri this is different from windows drivers. Next, save the file to a any directory (e.g. c:\temp) then logon to your System. In TCODE spad > goto Utilities > For Device types > select Import. A window will be opened > tick Device Type >
Object name: type the exact filename of your downloaded file (xxx.pri) to be imported
Mode: IMPORT
F8/Execute
Select the Local Object button and browse to the location of downloaded file and select open, this will start the import process. When import process is complete a pop message will be shown "Object successfully imported"
Note: For alternative drivers try to use ZSAPWIN.
Hope this helps.
Braille

Install canon printer on macbook air? I've got as far as add printer - the printer name appears as the software is installed but when I go to choose a driver, mine isn't listed - where is it? what do I do? Tearing hair out...

install canon printer on macbook air? I've got as far as add printer - the printer name appears as the software is installed but when I go to choose a driver, mine isn't listed - where is it? what do I do? Tearing hair out...

Thanks for telling us the printer model. You are right - it isn't in the software available for auto-download from Apple servers.
Are you using the version 3.66 CAPT driver released in Jun 2014?
Get it from:
http://www.canon-europe.com/Support/Consumer_Products/products/printers/Laser/i- SENSYS_LBP5000.aspx?type=download&softwaredetailid=tcm:13-920158&os=OS%20X%20v10 .9&language=
It is a disk image (.dmg) file. You must double-click to "mount" the disk image, then install using the installer inside that.
Please let us know if that helps. There are more thing to try.

HT1338 i have downloaded a printer driver but it still doesn't show in my add printer list

can anyone help? I am new to mac, so learning my way around

After downloading the new printer driver, go to Applications>System Preferences>Print & Scan>and with the printer connected to your Mac. on the left side of the Print & Scan window Press the "Plus" symbol at the bottom of the left hand column. That should show you the Printer attached to your Mac now.
Hope this helps

Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!

Sean L. wrote:
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!
The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
Printer on, and if networked, use a static IP address
Print & Scan
IP
Provide printer static IP address
Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
Add
Configure Driver under Options and Supplies
I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
Hopefully, you have already sorted this out.

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

Add printer driver

Similar Messages

Maybe you are looking for