Add push button to Serial number tab in migo transaction

Hi all,
I need to add an upload push button to the tab screen of serial numbers in migo transaction.Is there any exit, or badi,or enhancement spot for this.
Thanks & regards,
Srilakshmi.

Hi Ritvik,
you will not need it.
The item methods will process exactly the item what the addional item data are related to. In PBO_DETAIL and PAI_DETAIL, use parameter I_LINE_ID for the item reference.
Note: Not only read SCN etc, also the parameters desciption of the methods used.
Regards,
Clemens

Similar Messages

How to add push button in application tool bar in SAP transaction VA01

How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.

There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

How to add push buttons in out put screen of ALV

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

Hi Kiran,
Here is the sample code.If you are using reuse_alv_grid_display, no need to write code in PBO.
Just double click the 'TEST' which is written in code.Then create a GUI Status.In Application toolbar,type the name of the button you want(say BUTTON).Then double click that name.Then enter the ICON name and function text.Activate it.This itself will work.If you want all the functionalities,then try to do as Vinod told.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = v_repid
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
   i_structure_name                  = 'QMEL'
TABLES
    t_outtab                          = i_qmel
EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status '<b>TEST</b>'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
                         selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
    WHEN 'BUTTON'.                              "Double Click line Item
      call transaction 'MM01'.
endcase.
endform.

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

How to add push button in function module

I want to add Push button( yes/no) in same screen. I used POPUP_TO_CONFIRM,
but this popup is coming on next screen when I click on cancel button.

There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

How to Add Push Button On Selection Screen

Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.

Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar

How to add push button in alv display with out class or method

Hai,
How to add push buttons in out put screen of ALV (tool bar) with out using classes or methods .I want to know using normal ALV .
Thanks in advance .
kiran

You should post your question in the ABAP forum.
ABAP Development

I need to add push button to last extended price unit in sale order item B

i need to add push button to field last extended price unit in sale order item additional data B

i need to add push button to field last extended price unit in sale order item additional data B

Serial Number tab not appearing in IE01

Dear Experts ,
I have a material managed in serial numbers .
This material is to be linked with the equipment .
During cutover loading i will be creating the equipments manually .
I will put the material code in the construction type
But i am not getting the serial number tab .
How can i activate the serial number tab for the material in equipment master ?
Regards
anis

Hi,
Check the path spro>pm>Master data in PM ->Equpt->Eqpt categories --->Define Additional business views -->here check if SD tick is marked for ur eqpt cateogry ..
regards
pushpa

Add push button tp Micro-controller

Hi All,
I appreciate if you read my problem and answer me:).
I am using CSMB12 micro controller, which has port S as a SCI. 2 pins of this port is TXT and 2 pins are RXT. Right now i used one pair of these pins for both Bluetooth and LCD. now I need to add push button to my system, whenever I click on the push button, my micro start working and calculating the program, and whenever i click it again, it stops calculating and show the value on the LCD, and use another button for sending data by Bluetooth.
my problem is:
1-I used one SCI for both LCD and Bluetooth, how can I separate them?
2-Do you have a y sample codes for adding push button switch?
If you need my code, i can upload it.
really thank you.
Regards,
Sb

Just create the the UINavigationController wherever you need to show its root view controller. With no storyboard segue you would typically use something like this. I initiated from a UIButton action for this example. Instead of a generic UITableViewController, use the custom view controller class of your root view controller (PauseMenuTableViewController?). If you are using old-school nib/xib, replace initWithStyle with initWithNibName.
- (IBAction)showWhateverViewButtonClick:(id)sender {
    // create whatever view controller type will be the root of the navigation controller
    UIViewController *rootViewController = [[UITableViewController alloc] initWithStyle:UITableViewStylePlain];
    // create a navigation controller using that view controller for the root
    UINavigationController *navigationController = [[UINavigationController alloc] initWithRootViewController:rootViewController];
    // show the navigation controller (modal)
    [self presentViewController:navigationController animated:YES completion:NULL];

Deactivate Serial Number Generation in MIGO

Hi,
In MIGO,Serail number generation is made mandatory through Create serial no.s automatically checkbox in serial number tab.The process is such that the user will Check and then Post.So while pressing the Check button,internally serail numbers are generated and while posting the serial numbers are generated skipping the generated numbers in Check.ex.while checking 001 and 002 are internally generated and aftr Post if we check in IQ03 we get 003 and 004;ie 001 and 002 are skiiped.
Can anybody suggest how to avoid serial number generation while Check?

Hi,
Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
Thanks
Vikranth

Disable Serial Number Field in MIGO Screen

Hi all,
I want Disable Serial Number field in MIGO Screen how do i disable ?
is there any user exit or enhancement ?
Anybody please tell me.
Thanks
Regards,
S.Muthu.

S. Muthu
Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
Thanks & regards
Amol Lohade

Excise Invoice tab In MIGO transaction code

Hello
Could any body suggest, In Excise Invoice tab In MIGO transaction code I am getting "06 No Excise Entry" no otehr fields are coming.? All options like
01     Capture & Post Excise Invoice
02     Refer & Post Excise Invoice
03     Only Capture Excise Invoice
04     Only Refer Excise Invoice
05     Only Part1
Should come. Infact in my SAND Box client it is o.k but with same setting Golden Client it is not coming.?
Thanks & Regards
Sudhansu

Hi,
These options are coming from Excise Group settings.
Go to : SPRO-Logistics General-Tax on Goods movements-India-Basic settings-Maintain Excise Groups-in 'MIGO Settings' tab, select the check boxes, accordingly you will get the options in Excise Tab of MIGO screen.
Hope this will resolve your issue.
Regards,
Gopi Chand

Wan to add push button in the output of ALV Grid display.

Hi Friends,
I wan to add a Push button in the output of ALV GRID display with STANDARD ikons.
How to copy standard ikons of GRID output.
How to apply the copied status into my code.
Regards,
Viji

Hi,
Goto SE41, create a pf-status for your alv report program.
On the next screen, click menu EXTRAS --> click option ADJUST TEMPLATES and select radiobutton LIST VIEWER --> you will get all standard buttons of alv in the pf-status.
Delete the unwanted buttons and also you can add new buttons if reqd.
Activate pf-status --> and apply in alv program.
Now to apply this pf-status in your alv report follow code:-
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = v_rep_id       " report id
     i_callback_pf_status_set          = 'PF'           " for PF-STATUS
     i_callback_user_command           = 'USER_COMMAND' " for User-Command
     is_layout                         = wa_layout      " for layout
     it_fieldcat                       = it_field       " field catalog
     it_sort                           = it_sort        " sort info
    TABLES
      t_outtab                          = it_final      " internal table
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*&      Form pf
*       SUB-ROUTINE PF IS USED TO SET THE PF-STATUS OF THE SCREEN
*       ON WHICH THE ALV GRID IS DISPLAYED
*       -->RT_EXTAB
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_STAT'. "<--pass pf-status name here
ENDFORM.                    "pf
*&      Form USER_COMMAND
*       SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
*       AND EXECUTE THE APPROPIATE CODE
*      -->LV_OKCODE   used to capture the function code
*                     of the user-defined push-buttons
*      -->L_SELFIELD   text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
    WHEN '<function_code>'. "<--to handle user actions
ENDCASE.
ENDFORM.                    "USER_COMMAND
Hope this helps you.
Regards,
Tarun

How to add push button in report.

Hi,
how to add a push button in the standard list report and on clicking which the line-size of the screen should reduce from 300 to 100.
how to proceed.
Can anyone help me.
Regards
Guhapriyan

Hii Guhapriyam,
You can ceate PUSHBUTTON in selection-screen like Below
SELECTION-SCREEN PUSHBUTTON 2(10) text-004 USER-COMMAND CL1.
Create a variable to hold the processed PUSHBUTTON value like
DATA v_flag TYPE flag.
The PUSHBUTTON will be processed at the event AT SELECTION-SCREEN. So write your code like below
AT SELECTION-SCREEN.
   IF sy-ucomm EQ 'CL1'.
     v_flag = 1.          "Buttob clicked
   ENDIF.
START-OF-SELECTION.
IF v_flag EQ 1.
     NEW-PAGE LINE-SIZE 100.
ENDIF.
OR
The best way of doing this by setting PF-STATUS like
START-OF-SELCTION.
SET PF-STATUS 'ZSTATUS'. "Double click on this and set the pushButton in standard toolbar option and in function key specify the BACK, EXIT and CANCEL button .
Then write your logic at the event AT USER-COMMAND.
AT USER-COMMAND.
   CASE sy-ucomm.
     WHEN 'RED'.
       NEW-PAGE LINE-SIZE 100.
     WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
       LEAVE SCREEN.
     WHEN OTHERS.
   ENDCASE.
regards
Syed

Add push button to Serial number tab in migo transaction

Similar Messages

Maybe you are looking for