Add RAC Node

Hi
My environment is this one:
RAC10g (10.2.0.5) on Windows 2008 R2 Enterprise
2 Nodes
We need to add a new node. This environment was installed originally with the softwares in release 10.2.0.1 and after all components were patch to 10.2.0.5 and all is function well.
I have added nodes in RAC but with the original software not patch to a higher version.
The question is: there is a issue to consider to add the node having that all infrastructure is patched to a higher level ?
Thanks

user2931261 wrote:
Hi
My environment is this one:
RAC10g (10.2.0.5) on Windows 2008 R2 Enterprise
2 Nodes
We need to add a new node. This environment was installed originally with the softwares in release 10.2.0.1 and after all components were patch to 10.2.0.5 and all is function well.
I have added nodes in RAC but with the original software not patch to a higher version.
The question is: there is a issue to consider to add the node having that all infrastructure is patched to a higher level ?
yes, problems result from not having all node at same version

Similar Messages

Issues while Add / Delete RAC Node in Oracle 10g R2

Hi,
I have an requirement to add a New Node in the existing 2 Node RAC at Production, where 1 Node is Active & other one is passive due to licence issue & cannot keep both the nodes as active. Due to performance issues (Memory , CPU Cores ..etc) we are adding another new node.
Right now we are planning to add a 3rd database node making the new node as active and current active one as passive which is a swap & later on after final observation delete and decommission the current passive node.
This activity is checked at the Dev database with the same infrastructure (OS + Memory ..etc) but want to check what is the best approach (or) challenges we face during the RAC Node Addition / Deletion
RAC DB Version : 10.2.o.4
OS Version : RHEL 5.8
(1) Is the approach is right one , First Adding the node & later on delete
(2) If the approach is the correct , what would be the behavious of the 3rd node in means of active (or) passive
(3) We have taken RMAN backup , OS backup , CRS , ORACLE_HOME , ASM_Home backup , OCR & VD.
(4) Could you please give detail steps for adding / deleting node in 10g R2.
(5) Are they any known bugs to us with the DB release (or) OS while performing this activity.
Since this is a production machine we want to more proactive . Please correct or add any thing i am missing out ...
With Thanks,
Rakesh

Hello Rakesh,
Please follow the following steps.
Node Addition Steps
1. Install and configure OS and hardware for new node.
2. Add Oracle Clusterware to the new node.
3. Configure ONS for the new node.
4. Add ASM home to the new node.
5. Add Databse home to the new node.
6. Add a listener to the new node.
7. Add ASM instance to the New Node.
8. Add a database instance to the new node.
Details of steps
1. run cluvfy to verify whether New node is ready for addition or not.
     $ cluvfy stage -pre crsinst -n node2
2. from node1, execute
          $/u01/app/crs11g/oui/bin/addNode.sh
3. Specify node2 vip address and follow instructions.
4. In the last of installtion it may through an wornig and will ask to click on YES. click on YES
5. from node1,
          /u01/app/crs11g/bin/racgons add_config node2:6200
6. from Node1,set ORACLE_HOME=ASM_HOME and then execute addNode.sh from $ASM_HOME/oui/bin and Follow instrusctions.
7. From node1, set ORACLE_HOME=DB_HOME and then
     /u01/app/oracle/product/11.1.0/db_1/oui/bin/addNode.sh
     and Follow instructions.
8. from node2 start NETCA and configure listener for new node. While configuring Listener select the name of new node.
9. from node1 start dbca from ASM Home to configure ASM instance for new node.
10. Again from node1 start dbca from DB Home to add DB instance
Node deletion Steps
1. Delete the Database instance on the node to be deleted.
2. Clean up the ASM instance.
3. Remove the listener from the node to be deleted.
4. Remove the node from the database.
5. Remove the node from ASM.
6. Remove ONS configuration from the node to be deleted.
7. Remove the node from the clusterware
Details of Steps
1. Remove database Instance of node2
     Dbca -> instance Management -> delete instance -> password for sys -> select node -> finish.
2. Stop asm for node2 from any nodes.
     $srvctl stop asm –n node2
3. Remove asm for node2
     $ srvctl remove asm -n node2
4. Remove Listener from Node2 using NETCA.
5. From Node2:
          ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" -local
6. From Node2, start runinstaller from Oracle_DB_Home/oui/bin, and remove "DB_HOME"
     $ ./runinstaller
     On the WELCOME Screen -> Deinstall product -> Select dbhome name (OraDb10g_Home1) -> Remove
7. From Node1:
          ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1"
8. From Node2, set Oracle_Home to asm_1 and then fire:
          ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" -local
9. From Node2, start OUI and deinstall ASM Home.
10. From Node1, Set ORACLE_HOME= /u01/app/oracle/product/11.1.0/asm_1
11. From Node1: from /u01/app/oracle/product/11.1.0/asm_1/oui/bin, start OUI
          ./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1"
12. From Node2: as a root user (#) execute rootdelete.sh from /u01/app/crs11g/install
     # /u01/app/crs11g/install/rootdelete.sh
13.From Node-1 first find out the node numbers
     # /u01/app/crs11g/bin/olsnodes -n
     output : node1 1
          node2 2
14. From Node-1 as a root user (#):
     # /u01/app/crs11g/install/rootdeletenode.sh node2[Node_Name] 2[node_no]
     output:
          CRS nodeapps are deleted successfully
          clscfg: EXISTING configuration version 4 detected.
          clscfg: version 4 is 11 Release 1.
          Node deletion operation successful.
          'node2' deleted successfully
15. From Node2 set ORACLE_HOME=CRS_HOME and then execute
     $$ORACLE_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" CRS=TRUE -local
16. ./runInstaller and remove CRS_HOME
17. From Node-1:
     $ /u01/app/crs11g/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1" CRS=TRUE
18. check node is deleted from ./crs_stat -t

Add a node to Oracle 11g RAC

Good Morning.
Can somebody give a short and good guide to add a node to Oracle 11g RAC running on Suse Linux 10.?
Thanks

Hi,
Please find the below demo from oracle,
http://st-curriculum.oracle.com/demos/db/11g/r2/grid_rac/04_clusterware_add_node/clusterware_add_node.swf
Hope this helps.
Regards,
Anand.

Add / remove node RAC 9i

Good days and pardon for my Englishman, I am involved in a project to remove a node of rac 9i 9.2.0.5 and to add another node. Gurus, can to indicate myself like I can realize the tasks or if there exists algun document to which I could refer, have installed several RAC of her(it) 10g but it is my first experience on RAC 9i.
Thank you very much for everything

Here you go for step by step inst..
Metalink Doc-id :270901.1 (How to Dynamically Add a New Node to an Existing 9.2.0 RAC Cluster)
http://download-east.oracle.com/docs/cd/B10501_01/rac.920/a96596/addmig.htm
Hope this helps,
Please reward good answers by marking them correct or helpful...

Rac node failure crs cleanup failing

I have a three node rac database, 10.2.0.4 running on Windows server 2008. I lost a hard drive on one of the servers and it corrupted the mirror disk as well so I am having to rebuild. I am going through these procedures, RAC on Windows: How to Cleanup When A Node Has Been Disconnected or The OS Rebuilt (Doc ID 742737.1) and am running into a problem once I tried to delete the listener and then on to crs to delete the nodeapps for node3.
For the listener, I go into netca and the option to delete a listener is grayed out. When I run crs_stat I can still see the ora.node3.lsnr there. Does this mean that I just need to update tnsnames.ora or is there another place the information would be held? I hate to manually delete because I am afraid I won't get it cleaned out from everywhere. Any idea why that option would not be there?
My second issue is when I run this:
srvctl stop nodeapps -n node3 The nodeapps stop doesn't return any output and then when I try to remove nodeapps it gives me PRKO-2112: Some or all node applications are not removed successfully on node.
I have searched metalink for that error with no success as the document I found also says that you must stop nodeapps. I have already deleted the node from the db and asm and updated the appropriate inventory. I just need to finish the listener and crs and update the inventory for crs. Also, I noticed that the vip for the failed node was reassigned to node2 and I show that it has been released when i run cluvfy to check. Would crs give me errors on this if that was not the case?
I appreciate any help or guidance!

Wanted to post a follow up in case any others are interested in the results...
I had tried to add the listener back to one of the remaining nodes .ora file and then delete but that didn't work. Also, remove nodeapps continued to throw an error that it could not stop the listener or vip for the failed node.
After a few days of reading I make a decision to just unregister the abandoned services from crs. I made sure to backup the OCRCONFIG before I ran crs_unregister and was able to successfully remove the listener and vip services from the failed node.
This eliminated my issue with netca, the node did not show up there anymore. I then went on to remove nodeapps and it failed saying it could not find the resource vip. I then ran olsnodes -n and used crssetup to remove the node entirely. Everything showed removed and I went and updated the crs inventory to finish.
All looks good and now I am working to rebuild and add the node back in.

RAC - Node deletion process, how will olsnodes get updated?

We had a two node rac on 10gR2 with ASM. Second node has been deleted.
cluvfy comp crs -n <Node names> shows crs is not installed on second node. That is correct.
But /u02/app/oracle/product/102/crs/bin/olsnodes -n shows both the nodes still.
bash-2.03$ ./olsnodes -n
node1 1
node2 2
What steps are to be followed to update it?

Wanted to post a follow up in case any others are interested in the results...
I had tried to add the listener back to one of the remaining nodes .ora file and then delete but that didn't work. Also, remove nodeapps continued to throw an error that it could not stop the listener or vip for the failed node.
After a few days of reading I make a decision to just unregister the abandoned services from crs. I made sure to backup the OCRCONFIG before I ran crs_unregister and was able to successfully remove the listener and vip services from the failed node.
This eliminated my issue with netca, the node did not show up there anymore. I then went on to remove nodeapps and it failed saying it could not find the resource vip. I then ran olsnodes -n and used crssetup to remove the node entirely. Everything showed removed and I went and updated the crs inventory to finish.
All looks good and now I am working to rebuild and add the node back in.

Is RAC node configuration when disk array fails on one node .

Hi ,
We recently had all the filesystem of node 1 of RAC cluster , turned into read only mode. Upon further investigation it was revealed that it was due to disks array failure on node 1 . The database instance on node 2 is up and running fine . The OS team are rebuilding the node 1 from scratch and will restore oracle installable from the backup .
My question is once all files are restored :
Do we need to add the node to the RAC configuration ?
Do we need to do relink of oracle binary files ?
Can the node be brought up directly once all the oracle installables are restored properly or will the oRacle team require to perform addition steps to bring the node into RAC configuration .Thanks,
Sachin K

Hi ,
If the restore fails in some way . We will require to first remove and then add the nodes to the node 1 cluster right ? Kindly confirm on the below steps.
In case of such situation below are the steps we plan to follow:
version ; 10.2.0.5
Affected node :prd_node1
Affected instance :PRDB1
Surviving Node :prd_node2
Surviving instance: PRDB2
DB Listener on prd_node1:LISTENER_PRD01
ASM listener on prd_node1:LISTENER_PRDASM01
DB Listener on prd_node2:LISTENER_PRD02
ASM listener on prd_node2:LISTENER_PRDASM02
Login to the surviving node .In our case its prd_node2
Step 1 - Remove ONS information :
Execute as root the following command to find out the remote port number to be used
$cat $CRS_HOME/opmn/conf/ons.config
and remove the information pertaining the node to be deleted using
#$CRS_HOME/bin/racgons remove_config prd_node1:6200
Step 2 - Remove resources :
In this step, the resources that were defined on this node has to be removed. These resources include (a) Database (b) Instance (c) ASM. A list of this can
be acquired by running crs_stat -t command from any node
The srvctl remove listener command used below is only applicable in 10204 and higher releases including 11.1.0.6. The command will report an error if the
clusterware version is less than 10204. If clusterware version is less than 10204, use netca to remove the listener
srvctl remove listener -n prd_node1 -l LISTENER_PRD01
srvctl remove listener -n prd_node1 -l LISTENER_PRDASM01
srvctl remove instance -d PRDB -i PRDB1
srvctl remove asm -n prd_node1 -i +ASM1
Step 3 Execute rootdeletenode.sh :
From the node that you are not deleting execute as root the following command which will help find out the node number of the node that you want to delete
#$CRS_HOME/bin/olsnodes -n
this number can be passed to the rootdeletenode.sh command which is to be executed as root from any node which is going to remain in the cluster.
#$CRS_HOME/install/rootdeletenode.sh prd_node1,1
Step 5 Update the Inventory :
From the node which is going to remain in the cluster run the following command as owner of the CRS_HOME. The argument to be passed to the CLUSTER_NODES is a
comma seperated list of node names of the cluster which are going to remain in the cluster. This step needs to be performed from once per home (Clusterware,
ASM and RDBMS homes).
## Example of running runInstaller to update inventory in Clusterware home
$CRS_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORA_CRS_HOME "CLUSTER_NODES=prd_node2" CRS=TRUE
## Optionally enclose the host names with {}
## Example of running runInstaller to update inventory in ASM home
$CRS_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ASM_HOME "CLUSTER_NODES=prd_node2"
## Optionally enclose the host names with {}
## Example of running runInstaller to update inventory in RDBMS home
$CRS_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=prd_node2"
## Optionally enclose the host names with {}
We need steps to add the node back into the cluster . Can anyone please help us on this ?
Thanks,
Sachin K

Add Second Node in DMZ

Hi,
We are on EBS 12.1.3 and have single application node accessible over intranet. We want to add another node. I know all the steps to add the node by cloning but have some confusions so would like to clarify.
While cloning the second node autoconfig will run automatically. This will add the node in FND nodes so now we will have two apps tier in FND nodes.
1) Do we need to still run adaddnode.pl; if yes then why?. if no then what is the use of adaddnode?
2) After the autoconfig run 2nd node will become the primary node and application will be accessible only though 2nd node url. 2nd Node URL will be mapped to a virtual host in Load Balancer. and DMZ configuration will be over but which url will be used by the intranet users.
I want to separate URL basically. If only one url is required then i can use the virutal host names in the context of both nodes and autoconfig will do the rest. But i need two URLs and both should be working.
Prompt replies will be much appreciated.
regards,

Hi;
Please check below which could be helpful for your issue:
How to Add Node/Instance or Remove Node/Instance in 10gR2, 11gR1 and 11gR2 Oracle Clusterware and RAC [ID 1332451.1]
Re: How to add new node in 11gR2 RAC
Regard
Helios

Discover RAC nodes

Hi.
We have a RAC environment with two nodes running on Linux 64 bit(10.1.0.3).
This RAC invironment is installed with Db controle and have both intelligent agent and dbconsole running on both nodes.
We have now installed Grid control on another linux box with 10.1.0.3 Repository database, and we want to discover these RAC nodes from the Management Server.
Do we need to install a new Intelligent Agent into a separate ORACLE_HOME or can the agent installed during the default RAC installation be used. Further, if we need to install a new Agent, do we have to stop both agent and dbconsole running in the RAC Home and do we have to clean up the sysman schema in the RAC database?
Any help is apreciated.
Rgds
Kjell Ove

Make sure emd.properties has
# OMS Upload URL
# if there is no receiving OMS or if you wish to disable the UploadManager
# please set this value to empty or comment out below line
REPOSITORY_URL=http://xxxxxxx:4889/em/upload/
where xxxxx points to your Grid Control.
Also, set the following:
# emagent perl tracing levels
# supported levels: DEBUG, INFO, WARN, ERROR
# default level is ERROR
EMAGENT_PERL_TRACE_LEVEL=DEBUG
# other optional parameters for perl tracing
# EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
EMAGENT_PERL_TRACE_DIR=/tmp
This will create a .trc file in /tmp to show you what is happening.
Verify that $ORACLE_HOME/bin/emctl has the following correctly set to your CRS directory
CRS_HOME=/opt/app/oracle/product/10.1.0/crs
$CRS_HOME/bin/cemutlo -n
must return the name of your cluster.
From OEM Grid, click on the agent for the RAC host, then click "Add Database" Go. This will force a re-discover and then it should also populate the above trace file. Post the above trace file if it still is not working.

Reinstalling a lost RAC node

Have lost a RAC node (10gr2) some years ago. We recovered the node via a bit of a hack - pulling a mirrored root disk from another cluster node and changing the config of that root disk, after boot, to that of the lost node (including recreating local node log directories and so on). But that was done as a result of a crisis... ;-)
Have lost a 11gr2 RAC node (3 node RAC, 1st node) this weekend during scheduled maintenance (was told that the root disks crashed badly when server was restarted). O/s has been reinstalled in the meantime. I've been looking for an official support note or section in an Oracle manual that describes the most painless way to get a lost node working again. Have not found anything.
Is the recommended approach to remove the lost node from the cluster and then add it as a brand new node? Or did I miss an alternative or even recommended Oracle method, in my googling and looking through the docs and Metalink notes?

Is the recommended approach to remove the lost node from the cluster and then add it as a brand new node?i think so and This doc may help in this case as new node has no information of existing node setup.
Steps to Remove Node from Cluster When the Node Crashes Due to OS/Hardware Failure and cannot boot up [ID 466975.1]

What is best use of 1400 gb SGA (2 rac nodes 768gb each)

currently using 11.2.0.3.0 on unix sun sever with 2 RAC nodes each 8 UltraSPARC-T1 cpus (came out in 2005) four threads each so oracle sees 32 CPUS very slow(1.2 gb). Database is 4TB in size on regular SAN (10k speed).
8gb SGA.
New boss wants to update system to the max to get best performance possible Money is a concern of course but budget is pretty high, Our use case is 12-16 users at same time, running reports some small others very large (return single row or 10000s or rows). reports take 5 sec to 5 minutes, Our job is get the fastest system possible, We have total of 8 licenses available so we can have 16 cores. We are also getting a 6tb all flash SSD array for database. we can get any CPU we want but we cant use parallel query server due to all kinds of issues we have experienced (too many slaves, RAC interconnect saturation etc, whack-a-mole). sparc has too many threads and without PS oracle runs query in single thread.
we have speced out the following system for each RAC node
HP ProLiant DL380p Gen8 8 SFF server
2 Intel Xeon E5-2637v2 3.5GHz/4-core cpus
768 gb ram
2 HP 300GB 6G SAS 15K drives for database software
this will give us total of 4 Xeon E5-2637v2 cpus 16 cores total (,5 factor for 8 licenses) and 1536 ram (leaving ~1400 for sga). this will guarantee an available core for each user. we intend to create very very large keep pool around 300 gb for each node that will hold all our dimension tables. this we hope will reduce reads from the SSD to just data from fact tables.,
Are we doing a massive overkill here? the budget for this was way less than what our boss expected. will that big an sga be wasted will say a 256gb be fine. or will oracle take advantage of it and be able to keep most blocks in there.
will an sga that big cause oracle problems due to overhead of handling that much ram?

Current System:
===========
a. Version : 11.2.0.3
b. Unix Sun
c. CPU - 8 cpus with 4 threads => 32 logical cpus or cores
d. database 4TB
e. SAN - 10k speed disk drives
f. 8gb SGA
g. 1.2 gb ??
h. Users --> 12-16 concurrent and run reports varying size
i. reports elasped time 5 sec to 5 mins
j. cpu license -->8
Target System
===========
a. Version: 11.2.0.3
b. HP ProLiant DL380p Gen8 8 SFF server
c. RAM --> 768 GB
d. 2 HP 300GB 6G SAS 15K drives for database software
e. large keep pool -->90 gb to hold all dimension tables.
f. SSD to just data from fact tables
g. SGA -->256gb
Reassessment of the performance issues of current system appears to be required.Good performance tuning expert is required to look into tuning issues of current application by analyzing awr performance metrics . If 8GB SGA is not enough,then reason behind so is that queries running in the system are not having good access path to select lesser data to avoid flushing out of recent buffers from different tables involved in the query. Until those issues are identified , wherever you go, performance issue wont be going away as table size increase in future , problem will reappear.Even if the queries are running with more FULL Scan , then re-platforming to Exadata might be right decision as Exadata has smart scan , cell offloading feature which works faster and might be right direction for best performance and best investment for future.Compression (compress for OLTP) could be one of the other feature to exploit to improve further efficiency while reading the lesser block in lesser read time.
Investment in infrastructure will solve a few issue in short term but long term issue will again arise.
Investment in identifying the performance issues of current system would be best investment in current scenario.

ORA-20600 error while trying to add RAC database

I'm receiving the following error while trying to add the RAC database in grid control. Any idea?.
ORA-20600: The specified target is in the process of being deleted
This database doesn't exists in targets. But, I'm still unable to add.

Check the metalink Note: Unable To Add Rac Database To Grid Control Getting Error Ora-20600 [ID 1218797.1]
You need to wait for a while and check the status.

Rac node restart

Hello everyone,
I have met an error,that is our RAC node auto restart with below messages.
#/u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/alert_odsdb1.log
Fri Jun 07 12:23:42 2013
Thread 1 cannot allocate new log, sequence 58363
Checkpoint not complete
Current log# 2 seq# 58362 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58362 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Fri Jun 07 12:23:42 2013
NOTE: ASMB terminating
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
ASMB (ospid: 32641): terminating the instance due to error 15064
Fri Jun 07 12:23:44 2013
ORA-1092 : opitsk aborting process
Fri Jun 07 12:23:46 2013
ORA-1092 : opitsk aborting process
Instance terminated by ASMB, pid = 32641
Fri Jun 07 12:25:02 2013
Starting ORACLE instance (normal)
Fri Jun 07 12:25:23 2013
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Public Interface 'eth0:1' configured from GPnP for use as a public interface.
[name='eth0:1', type=1, ip=135.33.2.13, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.2.0/dbhome_2/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options.
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name:     Linux
Node name:     odsdb1
Release:     2.6.18-308.el5
Version:     #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine:     x86_64
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/dbhome_2/dbs/initodsdb1.ora
System parameters with non-default values:
processes = 4500
sessions = 6784
event = ""
spfile = "+DATA/odsdb/spfileodsdb.ora"
nls_language = "SIMPLIFIED CHINESE"
nls_territory = "CHINA"
memory_target = 170G
control_files = "+DATA/odsdb/controlfile/current.262.812288837"
control_files = "+DATA/odsdb/controlfile/current.261.812288837"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_files = 4096
cluster_database = TRUE
db_create_file_dest = "+DATA"
db_recovery_file_dest = ""
db_recovery_file_dest_size= 38820M
thread = 1
undo_tablespace = "UNDOTBS1"
instance_number = 1
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=odsdbXDB)"
remote_listener = "odsdb-cluster-scan:1521"
job_queue_processes = 1000
audit_file_dest = "/u01/app/oracle/admin/odsdb/adump"
audit_trail = "DB"
db_name = "odsdb"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Cluster communication is configured to use the following interface(s) for this instance
169.254.37.103
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
Fri Jun 07 12:25:33 2013
PMON started with pid=2, OS id=22959
Fri Jun 07 12:25:33 2013
PSP0 started with pid=3, OS id=22962
Fri Jun 07 12:25:34 2013
VKTM started with pid=4, OS id=22971 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Fri Jun 07 12:25:34 2013
GEN0 started with pid=5, OS id=22977
Fri Jun 07 12:25:34 2013
DIAG started with pid=6, OS id=22979
Fri Jun 07 12:25:35 2013
DBRM started with pid=7, OS id=22981
Fri Jun 07 12:25:35 2013
PING started with pid=8, OS id=22983
Fri Jun 07 12:25:35 2013
ACMS started with pid=9, OS id=22985
Fri Jun 07 12:25:35 2013
DIA0 started with pid=10, OS id=22987
Fri Jun 07 12:25:35 2013
LMON started with pid=11, OS id=22989
Fri Jun 07 12:25:35 2013
LMD0 started with pid=12, OS id=22991
* Load Monitor used for high load check
* New Low - High Load Threshold Range = [61440 - 81920]
Fri Jun 07 12:25:35 2013
LMS0 started with pid=13, OS id=22994 at elevated priority
Fri Jun 07 12:25:35 2013
LMS1 started with pid=14, OS id=22998 at elevated priority
Fri Jun 07 12:25:35 2013
LMS2 started with pid=15, OS id=23002 at elevated priority
Fri Jun 07 12:25:35 2013
LMS3 started with pid=16, OS id=23006 at elevated priority
Fri Jun 07 12:25:35 2013
RMS0 started with pid=17, OS id=23010
Fri Jun 07 12:25:35 2013
LMHB started with pid=18, OS id=23013
Fri Jun 07 12:25:35 2013
MMAN started with pid=19, OS id=23015
Fri Jun 07 12:25:35 2013
DBW0 started with pid=20, OS id=23017
Fri Jun 07 12:25:35 2013
DBW1 started with pid=21, OS id=23019
Fri Jun 07 12:25:35 2013
DBW2 started with pid=22, OS id=23022
Fri Jun 07 12:25:35 2013
DBW3 started with pid=23, OS id=23024
Fri Jun 07 12:25:35 2013
DBW4 started with pid=24, OS id=23026
Fri Jun 07 12:25:35 2013
DBW5 started with pid=25, OS id=23028
Fri Jun 07 12:25:35 2013
DBW6 started with pid=26, OS id=23031
Fri Jun 07 12:25:35 2013
DBW7 started with pid=27, OS id=23033
Fri Jun 07 12:25:35 2013
LGWR started with pid=28, OS id=23035
Fri Jun 07 12:25:35 2013
CKPT started with pid=29, OS id=23037
Fri Jun 07 12:25:35 2013
SMON started with pid=30, OS id=23039
Fri Jun 07 12:25:35 2013
RECO started with pid=31, OS id=23041
Fri Jun 07 12:25:35 2013
RBAL started with pid=32, OS id=23043
Fri Jun 07 12:25:35 2013
ASMB started with pid=33, OS id=23045
Fri Jun 07 12:25:35 2013
MMON started with pid=34, OS id=23048
Fri Jun 07 12:25:35 2013
MMNL started with pid=35, OS id=23052
Fri Jun 07 12:25:35 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
NOTE: initiating MARK startup
starting up 1 shared server(s) ...
Starting background process MARK
Fri Jun 07 12:25:35 2013
MARK started with pid=37, OS id=23056
NOTE: MARK has subscribed
lmon registered with NM - instance number 1 (internal mem no 0)
Reconfiguration started (old inc 0, new inc 119)
List of instances:
1 2 (myinst: 1)
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 valid according to instance 2
* domain 0 valid = 1 according to instance 2
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration started (old inc 119, new inc 121)
List of instances:
1 2 (myinst: 1)
Nested reconfiguration detected.
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Fri Jun 07 12:25:45 2013
Submitted all GCS remote-cache requests
Fri Jun 07 12:26:08 2013
Fix write in gcs resources
Reconfiguration complete
Fri Jun 07 12:26:10 2013
LCK0 started with pid=40, OS id=23632
Fri Jun 07 12:26:10 2013
Starting background process RSMN
Fri Jun 07 12:26:10 2013
RSMN started with pid=41, OS id=23646
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Fri Jun 07 12:26:11 2013
ALTER SYSTEM SET local_listener=' (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=135.33.2.13)(PORT=1521))))' SCOPE=MEMORY SID='odsdb1';
ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:11 2013
NOTE: Loaded library: System
Fri Jun 07 12:26:11 2013
SUCCESS: diskgroup DATA was mounted
Fri Jun 07 12:26:11 2013
NOTE: dependency between database odsdb and diskgroup resource ora.DATA.dg is established
Fri Jun 07 12:26:16 2013
Successful mount of redo thread 1, with mount id 3452000551
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Lost write protection disabled
Completed: ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Picked broadcast on commit scheme to generate SCNs
Thread 1 advanced to log sequence 58364 (thread open)
Thread 1 opened at log sequence 58364
Current log# 2 seq# 58364 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58364 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jun 07 12:26:21 2013
SMON: enabling cache recovery
Fri Jun 07 12:26:23 2013
minact-scn: Inst 1 is a slave inc#:121 mmon proc-id:23048 status:0x2
minact-scn status: grec-scn:0x0000.00000000 gmin-scn:0x0000.00000000 gcalc-scn:0x0000.00000000
Fri Jun 07 12:26:34 2013
[23651] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:2061372614 end:2061384964 diff:12350 (123 seconds)
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Fri Jun 07 12:26:34 2013
SMON: enabling tx recovery
Database Characterset is ZHS16GBK
No Resource Manager plan active
Starting background process GTX0
Fri Jun 07 12:26:35 2013
GTX0 started with pid=45, OS id=23931
Starting background process RCBG
Fri Jun 07 12:26:35 2013
RCBG started with pid=46, OS id=23933
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Fri Jun 07 12:26:35 2013
QMNC started with pid=48, OS id=23940
Completed: ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:38 2013
Starting background process CJQ0
Fri Jun 07 12:26:38 2013
CJQ0 started with pid=55, OS id=23977
Fri Jun 07 12:27:56 2013
Thread 1 advanced to log sequence 58365 (LGWR switch)
Current log# 1 seq# 58365 mem# 0: +DATA/odsdb/onlinelog/group_1.263.812288839
Current log# 1 seq# 58365 mem# 1: +DATA/odsdb/onlinelog/group_1.264.812288839
Fri Jun 07 12:28:18 2013
Starting background process SMCO
Fri Jun 07 12:28:18 2013
SMCO started with pid=70, OS id=25166
Fri Jun 07 12:29:01 2013
Thread 1 cannot allocate new log, sequence 58366
Trace file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Instance name: odsdb1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 33
Unix process pid: 32641, image: oracle@odsdb1 (ASMB)
*** 2013-05-14 15:37:08.705
*** SESSION ID:(3499.1) 2013-05-14 15:37:08.705
*** CLIENT ID:() 2013-05-14 15:37:08.705
*** SERVICE NAME:() 2013-05-14 15:37:08.705
*** MODULE NAME:() 2013-05-14 15:37:08.705
*** ACTION NAME:() 2013-05-14 15:37:08.705
NOTE: initiating MARK startup
*** 2013-05-14 15:37:16.835
instance health monitoring reports instance shutting down
*** 2013-06-07 12:23:42.700
NOTE: ASMB terminating
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
error 15064 detected in background process
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
kjzduptcctx: Notifying DIAG for crash event
----- Abridged Call Stack Trace -----
ksedsts()+461<-kjzdssdmp()+267<-kjzduptcctx()+232<-kjzdicrshnfy()+53<-ksuitm()+1332<-ksbrdp()+3344<-opirip()+623<-opidrv()+603<-sou2o()+103<-opimai_real()+266<-ssthrdmain()+252<-main()+201<-__libc_start_main()+244<-_start()+36
----- End of Abridged Call Stack Trace -----
*** 2013-06-07 12:23:42.783
ASMB (ospid: 32641): terminating the instance due to error 15064
/u01/app/grid/diag/asm/+asm/+ASM1/trace/alert_+ASM1.log
NOTE: ASMB process exiting, either shutdown is in progress
NOTE: or foreground connected to ASMB was killed.
Fri Jun 07 12:23:42 2013
NOTE: client exited [14808]
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
LMD0 (ospid: 31201): terminating the instance due to error 481
Instance terminated by LMD0, pid = 31201
Fri Jun 07 12:24:30 2013
* instance_number obtained from CSS = 1, checking for the existence of node 0...
* node 0 does not exist. instance_number = 1
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/11.2.0.2/grid/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
[grid@odsdb1 cssd]$ file core.30481
core.30481: ELF 64-bit LSB core file AMD x86-64, version 1 (SYSV), SVR4-style, from 'ocssd.bin'
[grid@odsdb1 cssd]$ gdb
gdb gdbserver gdbtui
[grid@odsdb1 cssd]$ gdb ocssd.bin core.30481
GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-42.el5)
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /u01/app/11.2.0.2/grid/bin/ocssd.bin...(no debugging symbols found)...done.
[New Thread 30486]
[New Thread 30530]
[New Thread 30526]
[New Thread 30525]
[New Thread 30523]
[New Thread 30522]
[New Thread 30521]
[New Thread 30520]
[New Thread 30519]
[New Thread 30504]
[New Thread 30503]
[New Thread 30495]
[New Thread 30485]
[New Thread 30484]
[New Thread 30483]
[New Thread 30481]
Reading symbols from /u01/app/11.2.0.2/grid/lib/libhasgen11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libhasgen11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocr11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocr11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrb11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrb11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrutl11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrutl11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxn2.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxn2.so
Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/libdl.so.2
Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libm.so.6
Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done.
[Thread debugging using libthread_db enabled]
Loaded symbols for /lib64/libpthread.so.0
Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib64/libnsl.so.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libcell11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libcell11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxp11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxp11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnnz11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnnz11.so
Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libc.so.6
Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done.
Loaded symbols for /usr/lib64/libaio.so.1
Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/ld-linux-x86-64.so.2
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnque11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnque11.so
Reading symbols from /opt/oracle/extapi/64/asm/orcl/1/libasm.so...(no debugging symbols found)...done.
Loaded symbols for /opt/oracle/extapi/64/asm/orcl/1/libasm.so
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7fff505fd000
Core was generated by `/u01/app/11.2.0.2/grid/bin/ocssd.bin '.
Program terminated with signal 6, Aborted.
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
(gdb) where
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
#1 0x000000369ea31d10 in abort () from /lib64/libc.so.6
#2 0x00002afc67f9aeda in scls_abort (flags=0) at scls.c:7088
#3 0x000000000040babd in clssscExit (thrd=0x10d325a0, status=clssscreasonSHUTNORM) at clsssc.c:2155
#4 0x0000000000446221 in clssgmClientShutdown (thrd=0x10d325a0, cmInfo=0x10b40090) at clssgmc.c:6415
#5 0x0000000000436707 in clssgmProcClientReqs (thrd=0x10d325a0, clctx=0x10b40630) at clssgmc.c:704
#6 0x0000000000436405 in clssgmclientlsnr (thrd=0x10d325a0) at clssgmc.c:644
#7 0x000000000040ac2f in clssscthrdmain (thrd=0x10d325a0) at clsssc.c:1716
#8 0x000000369fa0677d in start_thread () from /lib64/libpthread.so.0
#9 0x000000369ead49ad in clone () from /lib64/libc.so.6
(gdb)
2013-06-07 12:19:37.377: [    CSSD][1085888832]clssscSelect: cookie accept request 0x10b40630
2013-06-07 12:19:37.377: [    CSSD][1085888832]clssgmAllocProc: (0x2aaab0133ea0) allocated
2013-06-07 12:19:37.379: [    CSSD][1085888832]clssgmClientConnectMsg: properties of cmProc 0x2aaab0133ea0 - 1,2,3,4,5
2013-06-07 12:19:37.379: [    CSSD][1085888832]clssgmClientConnectMsg: Connect from con(0x6ae44fa) proc(0x2aaab0133ea0) pid(14139/14139) version 11:2:1:4, properties: 1,2,3,4,5
2013-06-07 12:19:37.379: [    CSSD][1085888832]clssgmClientConnectMsg: msg flags 0x0000
2013-06-07 12:19:37.384: [    CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.384: [    CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.384: [    CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(1/0x2aaab010c5c0)
2013-06-07 12:19:37.385: [    CSSD][1085888832]clssgmRegisterShared: grp DBODSDB, mbr 0, type 1
2013-06-07 12:19:37.385: [    CSSD][1085888832]clssgmQueueShare: (0x2aaab0085790) target global grock DBODSDB member 0 type 1 queued from client (0x2aaab010c5c0), global grock DBODSDB, refcount 23
2013-06-07 12:19:37.385: [    CSSD][1085888832]clssgmRegisterShared: global grock DBODSDB member 0 share type 1, refcount 23
2013-06-07 12:19:37.391: [    CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.391: [    CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.391: [    CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(2/0x2aaab0061f10)
what is the problem
Edited by: 徐振富 on 2013-6-7 下午6:38
Edited by: 徐振富 on 2013-6-7 下午6:45

is your ASM instance up?
If not, trying bring up ASM instance up just by itself and see if it throws any error?
Post status of crsctl status cluster -all

Add new nodes to IDoc in IDoc-XML Schema Mapping with Java

Hello everyone, I'm not very sure if this is the right forum but I have a problem and I haven't being able to find the answer, my scenario is as follows:
-First of all our system characteristics: SAP ECC 6.0, SAP BASIS 700, PI BASIS 2005-1-700 and SAP APPL 600
-We are in Mexico and we are creating our own billing documents with digital signature and a digital certificate in XML format according to SAP Note 1303712 and all derived notes.
-Our actual schema is working fine: We generate our IDocs (one for SD and one for FI) in SAP and we send them to PI XI to be parsed by a JAVA program and then converted to XML.
Now we have the requirement to add new nodes (I might be wrong in the term, feel free to correct me) to the IDoc, it sounds very simple but I have only experience with ABAP and no experience with PI, also it's working only on our production landscape, so if I don't do it right it could be very dangerous.
I have already read the following notes that might help me: 1321680 and 1318342 but their configuration is just in the aplication server and don't mention anything about PI or the Java program.
So, if any one could provide me some kind of guide or important aspects that I should take care (like mapping, structures, etc) to enhance IDocs for this schema i would be very grateful.
I hope this post were clear enough, if it is not also feel free to ask me to clarify or provide more information.
Kind Regards
Omar

Hi Omar,
Since the structure of the IDoc is changing (adding a new node), you would need to do the following in PI:
1) Reimport the IDoc in ESR/IR of PI.
2) Change the mapping/transformation logic in the mapping parser defined. If it is a Java code, you would need to reimport it in the ESR/IR. Use link below to understand more on jave mapping.
http://wiki.sdn.sap.com/wiki/display/XI/BeginnersguidetoJavamappingusingDOMparserinSAPXI
3) Delete the IDoc cache using transaction IDX2, after the IDoc is reimported.
Regards,
Sanjeev.

RAC node outage causes SOA Suite 10.1.3.4 BPEL failure

Using weblogic 9.2 and the SOA Suite 10.1.3.4. We use a 10g Oracle RAC ( 2 nodes ); the WL cluster has a multi data source of 2 pools, each pool pointing to a single node in the rac, each pool deployed to the cluster, and the multi data source in load-balancing mode.
So the other night, one of the db nodes had a hardware failure ( ironically, with a remote monitoring / management card ). Annoying, but it should not have caused the BPEL servers to be in "FAILED NOT RESTARTABLE" status the next morning.
Jun 9, 2009 12:10:07 AM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "esbaqds2": Io exception: The Network Adapter could not establish the connection>
SEVERE: Destroying JMSDequeuer failed
oracle.jms.AQjmsException: Connection has been administratively destroyed. Reconnect.
at oracle.jms.AQjmsSession.preClose(AQjmsSession.java:980)
at oracle.jms.AQjmsObject.close(AQjmsObject.java:409)
at oracle.jms.AQjmsSession.close(AQjmsSession.java:1020)
at oracle.tip.esb.server.dispatch.JMSDequeuer.destroy(JMSDequeuer.java:419)
at oracle.tip.esb.server.dispatch.JMSDequeuer.destroyWithoutUnsubscribing(JMSDequeuer.java:395)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:175)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
followed by a 2 GB log file containing 1.3 million iterations of the following within the next 10 minutes before the managed servers failed.
java.lang.NullPointerException
at java.lang.String.<init>(String.java:144)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:168)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Both managed instances of the BPEL cluster failed, even though the 1st node of the Oracle RAC was still available.
Our 10.3 cluster, also using multi data sources to the same RAC for the OSB components, simply went on about its business using the remaining rac node pool.
Seems to be a single point of failure...

We haven't changed the JDBC connection string yet, but we did run a test in the same environment while Oracle support considers the situation.
For the test, we simply shutdown one node of the RAC and watched to see what happens. Within the space of a minute, the JDBC "Failed Reserve Request Count" was increasing by thousands on every refresh of the screen. We restarted the RAC node after 5 minutes, by which time the "Failed Reserve Request Count" was over 190,000
The 2 BPEL managed servers remained in Running status and each created a 660 MB log file within that 5 minutes. In the original outage, the nodes were down for about 15 minutes. Most of the logging is being generated from within the oracle.tip.esb classes, not by the weblogic classes. It looks like that once the pool pointing to the downed RAC node becomes disabled, the Oracle BPEL code is still trying to use it even though the multi-source JNDI is the published lookup:
INFO: JMSDequeuer::createConnection - AQ Topics
java.sql.SQLException: weblogic.common.ResourceException:
esbaqds(esbaqds2): Pool esbaqds2 is disabled, cannot allocate resources to applications..
esbaqds(esbaqds1): Pool esbaqds1 is disabled, cannot allocate resources to applications..
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:250)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:348)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:364)
at oracle.tip.esb.server.dispatch.JMSDequeuer.createAQConnection(JMSDequeuer.java:559)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:159)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.common.ResourceException:
esbaqds(esbaqds2): Pool esbaqds2 is disabled, cannot allocate resources to applications..
esbaqds(esbaqds1): Pool esbaqds1 is disabled, cannot allocate resources to applications..
at weblogic.jdbc.common.internal.MultiPool.searchLoadBalance(MultiPool.java:331)
at weblogic.jdbc.common.internal.MultiPool.findPool(MultiPool.java:202)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:77)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:346)
... 11 more
SEVERE: Failed to process deferred message
oracle.tip.esb.server.dispatch.QueueHandlerException: Error creating "weblogic.common.ResourceException: No good connections available."
at oracle.tip.esb.server.dispatch.JMSDequeuer.createAQConnection(JMSDequeuer.java:661)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:159)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Add RAC Node

Similar Messages

Maybe you are looking for