Add RAM to MacBook Pro 13 Inch Late 2011

Is it okay if I added RAM to my MacBook? now my RAM is 6GB. this will make my macbook more heat or not because it need to process big RAM right?

Yes, it's perfectly OK to add RAM to your machine. It can use up to 16GB. There may be a minuscule increase in operating temperatures after going from 4GB to 6GB, but nothing significant.

Similar Messages

  • Problems upgrading RAM for Macbook Pro 13" late 2011

    First, thank you all for your assistance.
    I don't know if this has happened to anyone yet. I have a 13" late 2011 MacBook Pro that came with a default 4 GB of RAM. I considered upgrading to 8 GB and problems arose: I had stripes 1 inch in lenght distributed across the screen. I've done some research and saw that it was a hardware problem with the Graphics Card/GPU. I switched back to the original 4 GB and so far so good, no problems. I did notice a few key things:
    Originally I have 384 MB of Video Ram in the GPU
    While using the 8 GB Ram upgrade, it said 512 (called my attention)
    It reverted to 384 when switching to the original RAM
    In the tech specs section of Apple Support site about my machine, it says that the Video RAM is "shared" with main memory. No other knowledge on that.
    Could the RAM upgrade affected the memory supported by the GPU? Why did it increase? Is there any solution to this?
    Thanks to everybody in advance.

    It should - I've 16GB of RAM installed in my late 2011 15" and my built-in card now shows 512MB of VRAM. There might have been a problem with the RAM you installed. I would only buy Crucial, Kingston (not the 'value' brand), OWC or Corsair (again, not the 'value' brand).
    Some RAM sellers simply have less than stellar performance using Macs. Make sure that you install the correct speed and specs as recommended by Apple.
    Good luck,
    Clinton

  • Upgrading Ram on macbook pro 13" late 2011

    Just wandering do I have to match the RAM size in each slot when I upgrade or can I just upgrade one from 2gb to 8bg ? I've heard that crucial are probably the best to buy from. I'd appreciate any advice.

    RAM need not be installed in matched pairs, although it's a good idea to do so. Matched pairs perform faster than unmatched pairs. Here's what you can install:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    Reliable sources are:
    OWC
    DataMem
    Crucial.com

  • MacBook Pro 13" Late 2011, 16GB RAM and Apple Premium Service Center

    Hello all,
    My dad has a MacBook Pro 13" Late 2011, it came with a 4GB RAM. When he got Parallels and installed Windows 8, 4GB RAM were not enough to even deal with Safari so he had to buy 16GB RAM from Cruical. Today when he went to Apple Premium Service Center here in Qatar (51 East) they refused to install the x2 8GB RAM and only installed one of them. They kept warning my dad that installing the whole 16GB can cause issues with the MacBook Pro HDD and can make it go faulty. I wanted to ask if installing RAMs can pose the HDD life to any danger. Because my dad uses his Mac for work and wouldn't like to lose any of his files against small additional speed.
    Thanks.

    its very easy to do, here are step by step instructions with photos

  • Macbook pro 13' late 2011 4GB RAM...using lot of RAM

    macbook pro 13' late 2011 4GB RAM...using lot of RAM
    I have attatched screenshot...please help...sometime free memory is only 15 or 20 mb and i have to restart...after restart it works fine for 10 to 20 minuts

    its very easy to do, here are step by step instructions with photos

  • I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?

    I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
    and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.

    Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
    It also means the dedicated graphics card will be used less, but only so slightly less.
    You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
    You can also run Cinebench and compare the scores here
    Mac video card performance

  • Can i upgrade to 16gb on macbook pro 13 late 2011?

    hello, i have a macbook 13 inch late 2011, 2.8 ghz and i want to upgrade from 4gb to 16gb… is it possible? i want to add 8g + 4g cards

    I too have a MBP 13" late 2011. I was going to upgrade the RAM to 8 GB. I just realized I ordered 1xcard of 8GB instead of 2xcards of 4 each. I was going to return it and order 2x4GB but the seller: Quantum Technology is telling me I can still use the 8GB I ordered with the existing 2GB card that came with the MBP. They are telling me its not optimized but the MBP will recognize all 10 GB and the extra 2GB will make up for it. Is that so?
    Would it be better to use 10GB (made up of 2 and 8 BG) or replace it for a total of 8GB made up of 4+4?
    Lastely: Does anybody know if Quantum Technology is reputable?
    I'm new to the Mac and really appreciate your input! Thanks!

  • I have a macbook pro 13' (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks. Everything has slowed down. How do I go back to the older OS X Lion? Or should I improve speed differently?

    I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?

    i have run the EntreCheck and here is the report:
    EtreCheck version: 1.9.15 (52)
    Report generated 28 September 2014 16:16:39 GMT+3
    Hardware Information: ?
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.8 GHz Intel Core i7 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
    Disk Information: ?
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
      [loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
      [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ?
      HWNetMgr: Path: /Library/StartupItems/HWNetMgr
      HWPortDetect: Path: /Library/StartupItems/HWPortDetect
      StartOuc: Path: /Library/StartupItems/StartOuc
    Launch Daemons: ?
      [running] cn.com.zte.PPPMonitor.plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] PPPMonitord.plist Support
    Launch Agents: ?
      [running] cn.com.zte.usbswapper.plist Support
      [running] com.hp.devicemonitor.plist Support
      [loaded] com.hp.messagecenter.launcher.plist Support
      [running] Swapper.plist Support
    User Login Items: ?
      iTunesHelper
      Dropbox
    Internet Plug-ins: ?
      SharePointBrowserPlugin: Version: 14.0.0 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    Safari Extensions: ?
      AdBlock-2
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      MacFUSE  Support
      Tuxera NTFS  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          5% Safari
          3% WindowServer
          2% BitTorrent
          2% hidd
          0% softwareupdated
    Top Processes by Memory: ?
      229 MB Safari
      160 MB softwareupdated
      156 MB com.apple.WebKit.WebContent
      135 MB com.apple.IconServicesAgent
      102 MB VLC
    Virtual Memory Information: ?
      45 MB Free RAM
      1.55 GB Active RAM
      1.52 GB Inactive RAM
      895 MB Wired RAM
      628 MB Page-ins
      0 B Page-outs

  • What is the max memory allowed on a macbook pro 15" (late 2011), and what speed is the max speed allowed?

    Hello,
    I own a Macbook Pro 15" (late 2011) and I would like to upgrade the memory. I want to go with two 8gb sticks but if the motherboard only supports 8gb then I will have to stick with 8gb. Also, the ram that I have in currently, which is the 4gb that came with the mac, is 1333 Mz. Would I be able to upgrade to 1600 Mz on this laptop?

    Max is 16 GBs. Do not attempt to use memory with specs that differ from those required by your hardware.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • Macbook Pro 17 Late 2011 vs Macbook Pro 13 2012

    Hey
    I have a Macbook Pro 17 Late 2011 model, its works like charm but my onyl problem with it , its too big for me , i travel a lot and its not really good for portability. I use this mac mainly for coding and developing and playing WoW (in BootCamp) but i play nothing else. So my friend said he is willing to buy from me and i decide to get a new macbook pro but the 13" for portability and its also fair enough for coding but im afraid thats its not enough for playing WoW. My friend pay me 1800€ and i found a brand new Macbook Pro for 1050€ + 300€ (for 256gb ssd and 16gb ram) so its gonna be a fast machine but maybe still not enough for WoW. What should i do?

    The 17" model is one of the last that supports Express/34.
    Thunderbolt does offer more expansion options, but at additional cost.
    Make sure the 13" model you get has built-in optical drive unless you don't use it.
    Make sure any games you develop for support the graphics card of the machine you end up getting.  If they don't, don't expect them to magically work on your machine.
    I typically have found the recommended graphics card is the only one that works.  Minimum graphics card may at random not work, unless you do no multitasking with many games.

  • How long to boot MacBook pro 13" late 2011?

    It takes 1 minute 30 seconds to startup my macbook pro 13" late 2011 (2.4ghz i5 processor, 4GB RAM)
    This seems like a long time? I have Microsoft Office and Photoshop installed, will this slow it down?
    Thanks!

    if you have a normal hard drive installed - it usually takes a minute to desktop when you power up.
    check your login items to see what's loading when you first power up your Macbook.
    you can also go to disk utility and verify your disk permissions - repair them if errors are found then restart your Macbook. 
    see if that helps your booting time.
    good luck

  • Transcend 1TB SSD in MacBook Pro 15" (Late 2011)

    Hey Guys,
    I just bought a Transcend SSD 1TB for my MacBook Pro 15" (Late 2011) with OS X Yosemite 10.10.2.
    I got it for a good price but now I'm unsure if I could use it.
    The SSD i bought is the TS1TSSD370. For more Info click HERE.
    My questions are:
    1. Is the SSD I bought compatible with my MacBook?
    2. Is it a good SSD to use with a MacBook?
    3. Can I use a 1TB SSD? Because on the Apple Specs Site for my MacBook Model it's doesn't say anything about a 1TB SSD.
    4. Do I have to consider anything special when using this SSD?
    It would be really great if someone could help me out!
    Thanks in advance!
    Max

    I use the Carbon Copy Cloner method as outlined by BobRz above.
    I'll be installing another SSD (higher capacity) whenever it gets here (Dec 3-Jan. 03) and I'll install the new SSD in my MacBook Pro first and then using my old SSD in an enclosure to transfer data.
    I've had my current internal SSD in my Mac since April of 2012 and my 16GB of RAM since about May of 2012. I've a Crucial SSD (soon, two!) and use Crucial RAM, too.
    You may want to take a peek at my user tip - Ugrading Your MacBook Pro with a Solid State Drive. It's a bit dated (I'll be udating it pretty soon) but should give you a good start. Currently, I'm recommending Samsung 840 Pros (NOT EVO) and the Crucial M500 series.
    Good luck,
    Clinton

  • MacBook Pro 17" (Late 2011) Graphics Card

    Hello Community,
    I've researched this community, and found some relevant posts to the following question. However, the answers I found weren't completely satisfying. So, I'm posting my own on the subject to help me and others.
    I have the following:
    • MacBook Pro 17" (Late 2011, MacBookPro8,3) 2.5 ghz Quad Core i7/512 SSD/8 GB RAM
    • Graphics Card: AMD Radeon HD 6770M with 1 GB VRAM and Intel HD 3000 Graphics
    I know desktop models can be upgraded, but I can not afford the one I need at the moment. I am aware that many Apple laptop graphics cards can not be upgraded. Can this particular AMD Radeon graphics card be replaced and upgraded?
    If it can be replaced and upgraded, any suggestions on the best graphics card available? AMD has some nice upgrades.
    The card is nice, fast, and I'm not unhappy with it, but I run graphics and multimedia applications, and could benefit from the newer cards available.
    I appreciate your input community.
    Thanks,
    Greg

    About the only time you can upgrade a video card in a notebook is if that model notebook came with a better video card then what you ordered. At a later date if that better video card become available on the used market you could by one and replace the original as it was made to fit in the same model.
    But it is almost impossible to buy one from the original manufacturer. Especial during the current production run of that model.
    In your case the model you bought has the best video card available in the new line of MBPs. So there is no better card that would fit in your system. Whether the new models that will be coming out later this year will use a better video card and whether it would physical fit in your model is unknow.
    But all of what I wrote above doesn't really matter as with all Macbook Pros the video card and CPU is Soldered to the logic board and can not be replaced. If either fails the complete logic board needs to be replaced.
    The only things that can be easily replaced by the user in a Apple Macbook Pro is the RAM, hard drive and DVD drive.
    All other parts Apple does not sell to the general public.
    So your only option is if the newer models have a better video card is to sell your present system and buy the new model.

  • Macbook Pro 15" Late 2011 - Running Extremely Slow

    I've only had my Macbook Pro for about 9 months. Lately it's been running EXTREMELY slow, and freezing up at some times. I have a RAM monitor, and it will sometimes drop below 192MB! I have 4GB installed, and I only run a few light-weight applications, No Final Cut, or Photosop. On a typical day I'll have the following open at once: Safari, Spotify, Minecraft, Mail, Messages
    Nothing 4GB can't handle right? I guess not. I don't download from untrusted websites, so I doubt it's a virus. I honestly have no clue. I don't have the Apple Care, and I'm not sure if this is covered in the 1yr limited warranty that is included with the computer. Hopefully someone can help me resolve this issue.
    Thanks,
    Caleb.

    cdh0127
    Re: Macbook Pro 15" Late 2011 - Running Extremely Slow 
    09-Mar-2013 23:49 (in response to pennbank)
    I know how computers work.
    Oh Sorry Thought you were asking for assistance in solving a problem with your computer

  • MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

    Hi,
    I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
    When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
    I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
    I tried these things:
    - Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
    - Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
    - SMC, PRAM reset on both devices
    The cable works, because:
    17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
    I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
    After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
    Retriggering CMD+F2 or replugging breaks it again with massive bugs.
    The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
    Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
    The 6770M of the 17" is working well.
    Sample Video:
    http://www.youtube.com/watch?v=W_pgc52syes
    All updates/firmware updates of iMac and MacBook Pro are installed.
    Any solutions?
    Greets,
    Kai

    Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness.  I suggest that you post your thoughts here:
    https://www.apple.com/feedback/

  • Macbook Pro 13" (Late 2011) - High Definition Audio Device - Code 10

    Hi, i installed Windows 7 Ultimate 64 Bit via Boot Camp on my new Macbook Pro 13" (Late 2011). Driver Disk was installed, but the "High Definition Audio Device" couldn't be started. Status is Code 10. Normal Cirrus Logic Audio is working. Any advice, how this could be fixed? Would be nice, to have audio over the Mini-Displayport HDMI Adapter on Windows as well (Works perfectly with Lion).
    Thanks,
    Thorsten

    Hi, i installed Windows 7 Ultimate 64 Bit via Boot Camp on my new Macbook Pro 13" (Late 2011). Driver Disk was installed, but the "High Definition Audio Device" couldn't be started. Status is Code 10. Normal Cirrus Logic Audio is working. Any advice, how this could be fixed? Would be nice, to have audio over the Mini-Displayport HDMI Adapter on Windows as well (Works perfectly with Lion).
    Thanks,
    Thorsten

Maybe you are looking for

  • Is there a way to replace tags on import rather than create duplicates??

    I use the tag engine to connect with the KEPWARE OPC server program and at times I want to change how the tags are located inside KEPWARE but keep the same tagnames inside LABVIEW. I export the .scf file and modify it inside EXCEL. When I import it a

  • Link to Specific Location in a Newly Opened file

    I set up a link that opens another file.  Is there a way to go to a specific location (i.e. bookmark) in the file automatically "on Open"? Thanks for the help!!!

  • Using macbook as an amp

    Hey. I want to know if it is possible to use my MacBook as a stero amplifier for my DJ decks i.e. if I run the output from the mixer to the microphone port and then speakers from the headphones port. I have tried it whilst using Garageband and I get

  • DB Adapter not polling for particular table only

    My DB Adapter for one particular table is not working. My WSDL and Scema are defined and deployed in same for every table adapter but dont know only this one has issue. I have created adapter again twice and deployed but it didnt work. Please help me

  • How to play SPC files in iTunes? [+FLAC too]

    That's it. SPC files are music taken from Super Nintendo roms. Is there a way to play them in iTunes? What about FLAC?