Add/Remove Keyframe Greyed Out on Motion:Scale

I am trying to motion scale and I cannot create ANY keyframes.
I am only allowed to create keyframes in the opacity menu.
I am using Premiere Pro Version 4
I am trying to do this effect on a JPG image. I have also tried the effect on a video clip, and nothing. I am unable to create ANY keyframes, it is greyed out.
Any ideas as to why?

Glad that you're up and editing.
I do agree with Jim on reading everything on Keyframing, as it is a wonderfully powerful tool. Check out Bezier Curves to adjust Velocity (Ease-In/Ease-Out will be useful too, when animating). I probably rely on Keyframing in PrPro more than I should, as AE is just sitting idle on my computers. Still, If I can do it all in PrPro, I just get lazy sometimes.
Just wait until you start Keyframing Motion>Scale and Motion>Position (and dozens of other Effects) on individual Layers in a .PSD file. Man, the fun you can have!
Good luck,
Hunt

Similar Messages

HT201493 Why would the "Add" button be greyed out?

The "Add" button is greyed out and cannot be used. Plus if I get an invite I cannot accept it. I've tried resetting the phone, closing waiting and reopening the app, and checking all settings to find something that would stop this. Nothing so far has worked.

I couldn't agree more. There needs to be iMessage/message integration with iPhoto. I want to be able to share an iPhoto pic via iMessage! Also I feel the same way about iPhoto replacing the camera app/roll. Needs to be one location to edit photos and store them so we can eliminate duplicates, ect.

How can I remove the greyed out items in iTunes under the devices media list?

As you can see in the photo below I am slowly collecting greyed out TV episodes in my phones list of synced items. Its like they're pending a synchronisation but never actually do.
Things I have tried:
Turning off synching for individual episodes, shows and "all TV" doesn't remove them.
Syncing them to the device and then removing them, they show as copied to the device as normal but when they're removed the grey "pending sync" reappears.
fully wiping and restoring the device, no change if I restore a backup. I would like to avoid a complete "fresh" start is possible just due to the hassle of resetting apps etc.
Since it seems to be tied to some sort of cache that remembers the items pending synchronisation I would expect there is a way to clear that from the backup/phone/itunes without completely wiping the device and starting again. If not i'll work out if the placeholders are taking up space - which it looks like they might be under the "Other" category, if not then they can just stay.

Hi romeisdead,
Happy Holidays! Here are the instructions to remove the U2 album:
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support
http://support.apple.com/en-us/HT201396
To remove this album:
Go to https://itunes.com/soi-remove.
Click Remove Album to confirm you'd like to remove the album from your account.
Sign in with the Apple ID and password you use to buy from the iTunes Store.
You'll see a confirmation message that the album has been removed from your account.
If you downloaded the songs to iTunes on your Mac or PC or to the Music app on your iPhone, iPad, or iPod touch, you'll need to delete them manually.
Cheers,
- Judy

Adobe Customization Wizard X. Remove Previous Greyed out

I need to create an install package for Adobe Reader 10 which remove the previous versions of Reader but retains the versions of Acrobat. This feature is greyed out in the Customization Wizard. How do I get this to work?

By default the installer for Reader will remove any previous versions of Reader. There is a command line switch (REMOVE_PREVIOUS=NO) which can be used to keep the old versions of Reader (which is not recommended by Adobe).
Reader installer will not touch the installation of Acrobat (any versions).
You do not need Customization Wizard if you only want to do this.
With Customization Wizard you can perform other customization like EULA accept, default PDF viewer, installation UI etc.

Add grade layer greyed out

I'm in a direct link Pr project in Sg. Why are the add grade layers are greyed out?

This still isn't explained well ... so here goes.
In a Direct Link mode, you are using the Premiere Pro project file as the basis for all things done. It is a very different beast than a SpeedGrade project file, and in some ways amazing they can do this. However, there are some limits. SpeedGrade is NOT allowed to "touch" any timeline setting ... add, cut, or trim clips, add layers to a sequence, nothing. Hence what is natural to do in SpeedGrade in "native" mode is not allowed in Direct Link.
So ... the way to get grading layers is to create Adjustment Layers in PrPro, placing them over and across (if applicable) those clips of a sequence where you want to apply a grading layer. Then in Sg, you simply use that as your grading layer. It was a bit strange at first when the CC model came in, but I quickly learned to follow this. And when I forget to create one or discover I need one, it's a few seconds to go back to PrPro through the return-to-PrPro icon, create the layer/s, then DL back to Sg.
Of course, creating multiple layers on any track be it a clip or layer is the same ... the lower left corner layer stack is the typical Adobe-style process. And I do recommend creating additional primary, secondary, or " + " layers for nearly every different step of the process.
Neil

"Add Family Member" greyed out

I Have just finished adding 6 member in family sharing. After this I see that "add family member" is greyed out.
i Don't see any other option or reason for this

Hello, VIJYANTJ.
Thank you for visiting Apple Support Communities.
I understand that you are unable to add more than 6 people to Family Sharing. At this time, you are limited to adding 6 people to your account.
Family Sharing makes it easy for up to six people in your family to share each other’s iTunes, iBooks, and App Store purchases without sharing accounts
Family Sharing
Cheers,
Jason H.

Need to remove field grey out

Dear All,
I am processing for first stage delear invoice where I need to give the ED values manully.
I have given for BED, AED, ECS. But SECess field is greyed out (non editable mode) so i am unable to give the value.
Kindly suggest to make that field as editable so that i can give the value.
Rgds
Srini

Its a config part SD consultant can decide which is manual n which are auto.

Keyboard shortcut for ADD / REMOVE KEYFRAME?

Mm. Can't seem to find this one in the list under Help menu, and no clue bubble when you just mouse-over either. Maybe I'm just missing it.
What's the keyboard shortcut for adding / removing a keyframe?

Unfortunately there is no generic shortcut for this. There are some pre-defined entries in the shortcuts file, but only for select properties like position and scale. They are inert, though, and have no shortcuts assigned to them. A generalized approach would probably work by creating a script based on the menu item ID of "Add Keyframe" and instead assigning that script to one of the 20 reserved shortcuts for script execution. Something like app.executeMenuItem(3434) or so....
Mylenium

I can't add friends on Find My Friends, because the Add (+) sign is greyed out.

I can't figure this out. I'm on an iPhone 4 with iOS 6.1.3. Help?

http://www.apple.com/support/icloud/find-my-friends/

"Add Site System Role" is greyed out in the SCCM console

SCCM 2012 R2 CU3
Single Primary Site
Issue where “Add Site System Role” is greyed out in the SCCM console. We can install roles through PowerShell, however in the console we cannot add roles, remove roles, or change the properties of the site server.
The account we are using is full administrator in SCCM. It was used to install sccm infrastructure.
Any suggestions

Anything related to these?
https://social.technet.microsoft.com/Forums/en-US/4226f698-1114-4a62-bc25-705788432955/add-site-system-roles-remove-roles-greyed-out?forum=configmanagergeneral
https://social.technet.microsoft.com/Forums/en-US/76bb0064-9d5a-4b0e-b955-472fb5e9e833/the-add-site-system-role-is-grey-out-after-deleted-the-cloud-distribution-point?forum=configmanagerdeployment#5347193f-997b-41a6-8011-5320e3dd8a9e

HT201320 Why is Add Account greyed out?

I want to add an email account. The option to Add Account is greyed out. Why?

Got it

Apps greyed out

I have an iPad that I used with my Windows machine and iTunes.
Syncing worked fine.
I now have a new iMac (yea), but when I connect my iPad to iTunes on the iMac
click my iPad device name and Apps at the top all of the Apps appear on the
screen except they are greyed out. I asumme there is some sort of login, but I'm danged
(trying to be polite) if I can find it. It is where?
Thanks,
Chris

I have this problem as well. Rebooting the watch removed the greyed out icons, which is absolutely horrible, since I could only remember one of the apps that was greyed. So, you have to go back into the Apple Watch app, find the app(s) that were removed from the watch and re-add them.

All Enterprise Keyword options are greyed out

I just did a migration from SPO to SP13 on-prem. When I go in, I can see the keywords have been moved over, but the area to add them is greyed out. I went into the options for one of the libraries, and checked the Enterprise Keyword settings, and it is
enabled, but also greyed out. Thoughts?

Hi Matt,
Based on your description, my understanding is that you migrated SharePoint Online to SharePoint 2013 on-premise.
How did you deal with the Term store service on SharePoint online when you migrated?
Because keywords are stored in term store, I think, you need to configure managed metadata service application on SharePoint on-premise farm, and move the terms from SharePoint online to on-premise.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Can't Uninstall 9.0 Trial -- doesn't list in add/remove pgms

I've installed the trial version of Acrobat 9.0 and decided to uninstall it. However, it doesn't show in the add/remove programs list out of Control Panel. I'm running Win/XP SP3. Web searches have uncovered this program for Macs but not for Windows. Any suggestions? Thanks.

Okay, found the solution--I think. Fire up Acrobat, go to Help/Repair Acrobat Installation. After a LONG bit of disk-bashing, the process ends and Acrobat then shows up in the add/remove programs list.
I may just keep the program around a bit longer now, now that I'm not quite as paranoid about it as I was.
Ugh.

Scess value field is grey out in MIGO while posting rejection excise invoic

HI..
In Return delivery ,i am capturing & posting excise invoice...
The problem is while we can change the values of BED,AED,ECS but the SCESS field is coming grey out.Therefore i cannot change it.
How can we remove the grey out so that we can enter manually whatever amount we have credited.
here the print program is made considering in MIGO we can capture/post excise invoice..
plz reply fast.
Thanx & regards,
Satpal

When it is return delivery tranaction and if you don't select no excise entry system by default captures all data from original document except quantity field and hence all the fileds will be non modifiable. However it is better to select 'No Excise Entry" at the time of Return Delivery and then go for "create excise invoice for other movements" T Code "J1IS" so that you could enter all the duties correct based on the qty rejected in return delivery.
Hope it would suits you.
Cheers

Add/Remove Keyframe Greyed Out on Motion:Scale

Similar Messages

Maybe you are looking for