Add/Remove Software not working in Oracle EL5 x86

I installed the new Oracle EL5 version as a test on a Virtual Machine, after some playing around I got that to work ok. I had some video issues during the install so I missed the package selection section completely. After getting things up and running I tried to go into Add/Remove Software to change the package selection, but the list in the Browse tab is empty, the Search Tab only works on packages I ALREADY have installed, and the list tab only lists the packages that are currently installed. In Oracle EL4 I could go back and change package selections from the list. How do I do the same thing in EL5? I do not know the exact package versions. I have registered the system with ULN (Network license) and run updates..
Thanks

Jim,
It's probably best to file a service request via Metalink on this issue.
Sergio

Similar Messages

Add/Remove Software doesn't work on Oracle EL5 x86-64

The answer I need is "How can I either get this to work or install software that I didn't install at original install time by some other means" Note:I know how to use rmp -i but knowing the name of the actual rpm is a bit tricky and would prefer to have something like this working. For instance I have a program that is looking for the include files for the kernel that is running but unfortunately these files do not appear to be on disk anywhere. I would like to therefore load the source for this kernel but do not know the exact name that was used for that rpm.
Let me know. Thanks
Details of the error:
Under the Applications menu in Gnome you can find "Add/Remove Software" I tried to use it to add some software and I get the following error "Unable to retrieve software information" under details it says "Cannot find a valid baseurl for repo: update" (I would expect this to work ...wouldn't you if it is on the list of items to chose from the "Applications" menu.) I ran /usr/bin/pirut -h from the command line and it revealed that it uses /etc/yum.conf. that took me to check ULN-Base.repo file under /etc/yum.repos.d which contains the following:
Note: I was unable to validate the existence of the url's provided below.
# Oracle-Base.repo
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
[base]
name=Oracle-$releasever - Base
mirrorlist=http://mirrorlist.oss.oracle.com/?release=$releasever&arch=$basearch&repo=os
#baseurl=http://mirror.oss.oracle.com/Oracle/$releasever/os/$basearch/
gpgcheck=1
gpgkey=http://mirror.oss.oracle.com/Oracle/RPM-GPG-KEY-oracle
#released updates
[update]
name=Oracle-$releasever - Updates
mirrorlist=http://mirrorlist.oss.oracle.com/?release=$releasever&arch=$basearch&repo=updates
#baseurl=http://mirror.oss.oracle.com/Oracle/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=http://mirror.oss.oracle.com/Oracle/RPM-GPG-KEY-oracle
#packages used/produced in the build but not released
[addons]
name=Oracle-$releasever - Addons
mirrorlist=http://mirrorlist.oss.oracle.com/?release=$releasever&arch=$basearch&repo=addons
#baseurl=http://mirror.oss.oracle.com/Oracle/$releasever/addons/$basearch/
gpgcheck=1
gpgkey=http://mirror.oss.oracle.com/Oracle/RPM-GPG-KEY-oracle
#additional packages that may be useful
[extras]
name=Oracle-$releasever - Extras
mirrorlist=http://mirrorlist.oss.oracle.com/?release=$releasever&arch=$basearch&repo=extras
#baseurl=http://mirror.oss.oracle.com/Oracle/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=http://mirror.oss.oracle.com/Oracle/RPM-GPG-KEY-oracle
#additional packages that extend functionality of existing packages
[Oracleplus]
name=Oracle-$releasever - Plus
mirrorlist=http://mirrorlist.oss.oracle.com/?release=$releasever&arch=$basearch&repo=Oracleplus
#baseurl=http://mirror.oss.oracle.com/Oracle/$releasever/Oracleplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirror.oss.oracle.com/Oracle/RPM-GPG-KEY-oracle
#contrib - packages by Oracle Users
[contrib]
name=Oracle-$releasever - Contrib
mirrorlist=http://mirrorlist.oss.oracle.com/?release=$releasever&arch=$basearch&repo=contrib
#baseurl=http://mirror.oss.oracle.com/Oracle/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirror.oss.oracle.com/Oracle/RPM-GPG-KEY-oracle

As of now, there are no yum repository for Enterprise Linux. But you can use up2date to install other packakges if you have registed with ULN.

How to remove Safari 5 from pc with xp.....add/remove does not work

Looking for help removing Safari 5 from my PC using XP. Add/Remove program will not uninstall it.

Welcome to the Apple community.
If you can't remember the password, reset it at...
iForgot.com

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Add Row Button Not Working

I've read the threads and done numerous searches. Not sure why the add row button isn't working, other buttons work.
Here's what I've found and done.
Print button subform - positioned (have tried flowed, too) allow page breaks
Table: body rows vary   -    Insert wrap in subform - subform flowed - allow page breaks
     row 1 binding - repeat row for each data item - min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)
Form properties - preview in dynamic PDF, interactive   -   PDF render format dynamic xml, run in 9.0 or later (to remove errors)
Insert Row Button in Subform Row 1 Cell 1 (not counting header row) on click, JavaScript run at client tried table.row1.instancemanager.addinstance(1);   also tried full path
saved as dynamic pdf
My hierarchy looks like:
form1   [autofit]
     master pages
          page 1
               untitled content area
     printbuttonSubForm [flowed, top to bottom, allow page breaks]
          untitled subform [flowed, top to bottom, allow page breaks]
               printbutton1
          tablesf    [flowed, top to bottom, allow page breaks]
               table1    [allow page breaks]
                    headerRow
                         cell1
                         cell2 etc
                    Row1   [allow page breaks, repeat row for each data item, min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)]
                         subform   [allow page breaks, repeat row for each data item, min 1, max 25
                                        (why won't it keep an initial count when I try putting in 1 or 0?)]
                              button1    table1.row1.subform1.instanceManager.addinstance(1);
                         cell2, etc
     Referenced objects
Questions:
I click the Add Row button, but nothing happens, why? The print button works.
Found a reference to def instances of same row, what does that mean?
Is my hierarchy correct?
How to set Form1 to flow? Object says mixed objects with no options
Many thanks for your assistance! Leslie

Hi Leslie,
There could be a few things.
First check that the form is saved as Dynamic XML in the save as dialog. If it is saved as Static the add instance will not work.
Make sure that the object you are targetting is set to repeat in the Object > Binding tab
Check your syntax in the script editor (button above the editor). Some of your post is not camel case. For example addInstance and instanceManager. Note the capital letter for the second word.
If you could share your form it would be easier to track down what the problem is. You can use Acrobat.com or YouSendIt.com or some other file sharing site. Just remember to post the published URL.
Good luck,
Niall

PowerPoint add-in is not working when installed for All Users using msi installer.

Hi All,
I have created PowerPoint add-in using c#-vsto. I have created msi installer to install this add-in with following two options:
1. Just me
2. Everyone
However, add-in is not working properly (Events and custom task panes are not working).
I have created registry key as below
1. for "Everyone" : HKLM\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
2. for Just me : HKPU\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
But when I set InstallAllUsersVisible property to False (When add-in is installed only for current user ), then add-in works fine for current user.
Please let me know if anything is missing!!!
Thanks

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to develop the add-in, you'd better post your question to the MSDN forum for VSTO
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Multi scanner software not working after E71 FW U...

Multi scanner software not working after E71 FW Update to 3.1

Nice bit of trouble-shooting. Thanks for sharing the final solution.

What will you do if any SQL is not working.in oracle 10g...apps 11.5.10.2

What will you do if any SQL is not working. in oracle 10g....apps 11.5.10.2

928714 wrote:
yes sir.If you help me in answering my questions i wll be very thankful to you sir.
tnx,I haven't a clue.
As you have been advised in many of your posts, go study the documentation for whichever specific topic you are interested in.
For me to answer your questions, I would need to go get that documentation.
Then I would need to read that documentation.
Then I would need to write a forum post that interprets what I think I learned from that documentation.
It is so very much faster if YOU go do that instead of posting to a forum and expecting others to do it. You will remember what you study for a lot longer time if you teach yourself.

Table_From_Block Build-in Package is not working in Oracle 10G

Hi
Table_From_Block Build-in Package is not working in Oracle 10G
Kindly advice..

user648759 wrote:
Hi
Table_From_Block Build-in Package is not working in Oracle 10G
Kindly advice..Provide a little more information. Forms version OS version, more information about your problem and question.
--and explain what on earth Table_From_Block* mean's--
Tony
PS: TABLE_FORM_BLOCK is a built-in for internal use, usually auto generated by forms. For a moment I didn't get what that meant, need more coffee.
Edited by: Tony Garabedian on Aug 29, 2008 12:39 PM

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

When i install the new os my fcp,motion and many adobe software not working so please help me out.

when i install the new os my fcp,motion and many adobe software not working so please help me out.
there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
It would also be nice if you could include which model MacBook Air you're using.
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

How to get the users list that can Add/Remove or modify Vendors in Oracle?

How to get the users list that can Add/Remove or modify Vendors in Oracle?
I need to generate a report like name and responsibility. Thanks

That query gives the Supplier information.
But what i would be needing is to find out the USERS in oracle who can Add/Modify or Remove Vendors.
I assume it should be based on the Responsibility.

Runtime.exec() in Java not working in Oracle 10 Application Server

Hi ,
I am trying to call a .exe file which is in the Web Application folder .
I am Using Process p = Runtime.exec("path to .exe file ")
This code is working fine when used with JBOSS , but not working with Oracle Application server .
Please tell me whether i need to do any chnages to make it work
Thanks in advance .

I ran a quick test with your code, I just had to make some small changes, and things work for me...
I'm testing with JDeveloper 10g 10.1.3.2.0 ...
The only thing I wonder is DBUser DBPass DBHost, those are not the actual values, correct?, neither they are environment variables?...
In the server hosting your OAS, you should try running the whole CMD line from the start/run dialog ... make sure it works in that server ...
Here is the code used in my test:
In JSP:
<%@ page import="runexepkg.*" %>
<%
String msg = "";
try
RunEXE p = new RunEXE();
msg = p.main1();
catch(Throwable t)
     System.out.println("Exception Raised");
     t.printStackTrace();
%>
<%= msg %>In Java Class:
package runexepkg;
import java.sql.*;
public class RunEXE
    String ss="";
    public String main1()
    try
        Runtime rt=Runtime.getRuntime();
        Process p = rt.exec("CMD /C start C:\\oraappserver\\j2ee\\WebGis\\applications\\PowerGis\\web\\WEB-INF\\classes\\GisProject\\cust_data_1.exe DBUser DBPass DBHost");
        System.out.println("Command has been executed");
        Class.forName("oracle.jdbc.driver.OracleDriver");
        Connection con = DriverManager.getConnection("jdbc:oracle:thin:@DBHost:DBPort:orcl","DBUser","DBPass");
        System.out.println("Test Connection ========== "+con);
        Statement st = con.createStatement();
        ResultSet rs = st.executeQuery("SELECT SYSDATE FROM DUAL");
        if(rs.next())
            ss="Command has been executed - Database has been accessed";
        else
            ss="Command has been executed - Database was not accessed";
    catch(Throwable t)
        System.out.println("Exception raised, command has NOT been executed");
        ss="Exception raised, command has NOT been executed";
        t.printStackTrace();
    return ss;
}Edited by: Rodolfo Ferrari on Jul 23, 2009 10:40 PM

Triggers not working in Oracle 9iAS

The form triggers are not working in oracle 9i AS.
My Application server has Linux operating system with oracle form/report server installed. I am able to upload the form
in the client machine (using Internet Explorer Win98 OS). Also i can feed in the data but none of my triggers are working (WHEN BUTTON PRESSED and other validation triggers).
Can anyone suggest what to do pls.
Tnks in advance
Rgds
Manoj Philip
[email protected]

Well we've tested on Linux and the trigger do work - I remember two other postings on this forumn from prople with the same problem:
Re: SQL Developer Necessities
Re: About EXPLAIN PLAN table
In one case the problem was not re-compiling using f90genm.sh, in the other it was something to do with the Machine setup but I don't know what the final resolution was.
The only other thing is to make sure that you are on a certified linux release for using with iAS e.g. Redhat Server 2.1 and Suse Enterprise server 7 and Untited Linux
You can check the current certifications on Metalink.oracle.com

Device software not working

BB device software not working on windows 7 please help me , i installed last version 7.0,1

In what way does it not work? Without specific details its very hard for anyone to help

Add/Remove Software not working in Oracle EL5 x86

Similar Messages

Maybe you are looking for