Add review enabled and enforce single service requisitions

Is there a way/option to make "Add review enabled" for the service, but not allow adding additional services to the requisition once Add & Review Order is clicked?
Reason being there may be services that should not be ordered together with other services (i.e. we want to make sure single requisition entry for a requisition always for a particular service), but having Add review enabled will still have benefits for these services from user experience perspective. For example, users would be able to still add the service to "cart" or Add & Review Order, hold it, review it, come back later after confirming some information, etc. before actually submitting the order. While they can edit the requisition entry/service, they should not be able to add additional services to this requisition, since this service is marked "single entry order" only of some sort.
By simply setting the service as Add review disabled, you lose this functionality and users must either submit the order on single sitting/session, or have to just start over if they need to confirm something or come back later.
Thanks.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

  • Add-on page won't open - want to enable and enable flash player

    The Firefox Ad-ons page will not open - it goes into an eternal cycle. I used to open it regularly to enable and disable the flash player - now I can't do this.

    First, if the active category on the left side of the Add-ons page is '''Get Add-ons''', click '''Extensions''' to bypass whatever is loading and go directly to the area likely to have the toolbar. (I think it's loading a page of popular add-ons, which isn't very relevant to what you want to do.) Does that work?
    If that doesn't work, you could try disabling all add-ons first and see whether that makes a difference. You can do this using Firefox's Safe Mode dialog.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, check just the box to "Disable all add-ons" then click Make Changes and Restart. Does this allow you to access the Add-ons page?

  • Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled

    Well, as I said, Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled. This is on a 2010 white unibody macbook. I have a google toolbar, and all of a sudden, it keeps saying that it can't communicate with the toolbar. Now, I can't even uninstall it because whenever I go to the add on manager, it says there's an 'unresponsive script'. Could anyone help me? Thanks.

    I fixed it by running in Safe Mode, and uninstalling Personas. Thanks again!

  • How I can delete add-in in windows 8.1 ,I see only enable and disable function but I don't see any add-in delete function

    hi,
    how I can delete  add-in applications in add-in applications section ,  I try to delete one but I don't see any delete function, I see only enable and disable function in the manage add-in applications wizard.
    thanks
    johan
    h.david

    Hi,
    If you want to remove the add-ins of Office 2010 programs, you need to remove it from control panel.
    For example, if you use Excel, please try to follow the link to delete the add-ins:
    http://office.microsoft.com/en-us/excel-help/add-or-remove-add-ins-HP010342658.aspx
    If I misunderstand something, please let me know.
    Regards,
    George Zhao
    TechNet Community Support

  • Setting up ldap and enabling sso for disussion service

    How to do setup of discussion service site so that user base of the discussion site uses an external ldap like OID? It was very easy with Jive(on which oracle's version si based). It was done at the time of installation.
    I thought of using system properties that were defined for jive and using the same for oracle's disussion service but not sure what values I can provide for UserManager and GroupManager. I tried giving the same values as that we used in Jive but after restarting the WLS_Services the login function was not working at all. Is there a document that helps in doing this setup.
    Also, do we have a document on how to enable SSO with discussion services site?
    -Pratap

    I figured out how to do ldap settings for discussions. It is the same approach as that of jive. Go to C:\OracleMiddlewareHome\user_projects\domains\base_domain\config\fmwconfig\servers\WLS_Services\owc_discussions_11.1.1.2.0 and edit the jiveStartup.xml. Change to contain <setup>true</setup> to <setup>false</setup> . And log in to discussion site using the http://localhost:8890/owc_discussions. This will let you go through setup process where we can give the ldap settings.
    Can someone please help us in working with SSO?
    -Pratap

  • How to enable diagnostics in cloud services and virtual machine

    Hi All,
    I need to enable diagnostics  for cloud services and virtual machine in our
    cloud environment. I referred the below link.
    https://convective.wordpress.com/2014/06/27/using-azure-monitoring-services-api-with-azure-cloud-services/
    Installed azure SDK 2.5 and cloud services instance is not displayed for cloud services in Visual studio 2013. Please provide the steps to enable at run time. 
    1) How to enable this diagnostics at run time.
    2) How to enable event logs for cloud and Virtual machine
    3) How to get the event log data's from REST API.
    Please help to resolve this.
    Thanks.
    Regards,
    Rathidevi

    hi Rathidevi,
    In addition, you could enable diagnostics feature on VM from this blog:
    http://azure.microsoft.com/blog/2014/09/02/windows-azure-virtual-machine-monitoring-with-wad-extension/
    Please refer to it.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ARIS Web Services  enables and ARIS connect  in SM

    Hi all,
    1.How to enable the ARIS Web Services  enables in Solution manager?
    2.How To connect the ARIS Server to Solution manager?
    Regards,Neni

    Hi Neni,
    Did you get any chance to go through the below links? It will be much appreciated if you could share the effort taken from your end to find the answers so that the team can provide you exactly what you require than giving all!
    Prerequisites & steps needed to connect SolMan  to the Aris server?
    Re: ARIS and Solution Manager
    SolMan - ARIS synchronization guide and u201Cbest practiceu201D documents
    http://help.sap.com/saphelp_nw70/helpdata/EN/84/da224272eeda2ce10000000a1550b0/frameset.htm
    Re: Aris Installation
    Rajeev

  • I FORGOT MY IPAD4(wifi) password and it got disabled now how can i recover it?? By the way the wifi is of and the location services and find my ipad are enabled now what can i do to recover it???? PLZ HELP!!!

    I FORGOT MY IPAD4(wifi) password and it got disabled now how can i recover it?? By the way the wifi is of and the location services and find my ipad are enabled now what can i do to recover it???? PLZ HELP!!!

    Entering your Wifi password will not - unless I'm missing something completely - disable your iPad. The only thing which will disable your iPad that I'm aware of is entering your passcode for iPad incorrectly multiple times.
    If this is the case then please see: http://support.apple.com/kb/HT1212
    If you have forgotten your password for your router the WPA or WPA2 key as it's also known as they you will need to log in to your Router and setup a new WPA(2) key.
    Regards,
    Steve

  • Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

    Dear Technet,
    Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
    My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
    even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
    Help me please.. thank you.
    Regards
    Shamil

    Hi,
    Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
    The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
    of the local Administrators group.
    If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
    user right.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

    If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
    Check options.."Web Server: Configuration" within LabVIEW.
    LabVIEW Champion . Do more with less code and in less time .

  • HT204023 I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me

    I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me. Before I was using this service but now facing problem.

    Md Asad wrote:
    Yes but they told mobile co mean Device 'iPhone co'
    Sorry but that makes no sense in English. Only your mobile phone company (i.e. "carrier") can enable the Personal Hotspot feature.

  • Difference between Service Enabling and XI Enabling

    Is there any difference between Service Enabling and XI enabling?
    If so, can anybody explain the difference??
    Message was edited by:
            Nalini G

    Hi Sejoon,
       Thanks a lot for such an informative document.
    It has helped me a lot to know more and more:-)
    Thanks once again!
    I have another important question. Suppose , I have developed some asynchronous service for which there wouldn't be any response, then how can we get to know if the request which was sent to the target system has reach perfectly or not?
    In other words, how do we test if that whole Asynchronous service is working fine or not?
    Is there any information which would help us to know if the request has successfully reached to the destination system?
    Please let me know about this.
    Best Regards,
    Nalini

  • Add & Review Order

    Add & Review Order
    We have a dictionary setup to capture a problem description we use in several services.  When the customer selects the Add & Review Order option then returns to the request, this text area is cleared and the description entered by the customer is now lost.  Has anyone experienced this issue before?  - is there something we have missed in the setup of the field?  None of the other  text fields in the request are lost. 

    The only time we have experienced this is if we use ISF to hide and show the field under certain conditions. The form is re-loaded at Add & Review thus clearing the field.
    To get around this you must run the ISF only at the Ordering moment and only when ReqEntryID = 0. Since at Add & Review a requisition ID is created the ISF to reset the form and clear the field will not run

  • Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

    Hi All,
    I'm getting the below error in My SHarepoint 2013 search Administration page.
    Crawler background activity - The search application 'Search Service Application 1' on server ""  is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
    on the server.
    and when i click on Crawl Log and content source
    it throws the below error
    The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
    the service is enabled. This might also be because an indexer move is in progress
    When i check the search status
    Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
    As of now search service application is online and search is working.But not sure why it throws the above error.
    I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
    But no luck,This is happening in my prodcution environment.
    Any help will be greatly appreciated.
    There are the logs i have found
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
    on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
    Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)    
    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
    Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
    - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
    http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
    Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
    Anil Loka

    Please try below mentioned steps:
    1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
    2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
    3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
    5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • Windows 2012 R2 Active Directory Domain Services and Remote Desktop services Role on the same server.

    Findings: 
    Currently, Windows 2012 R2   AD DS role and RDS With Broker services can only seem to coexist properly in a new domain not an existing domain. Any attempt to add to an existing domain causes internal database user access denied issues and any attempt to
    adjust rights and circumvent is dubious at best.
    The escalation technician said it best. Out of 50 clients that want to do this, they end up not being able to help 5 right off the bat for whatever reason. As for the other 40 they might be able to help by running reports, adjusting rights and trying to add
    the roles until it works.  This can end up being a 20 day process. Basically they are playing whack-a-mole with user rights and permissions until something sticks.
    We tried creating an OU where any other domain policies would not be inherited to see if that was the issue, a fresh install with different sequence of adding the Roles, no effect.
    Given the errors I witnessed when running procmon and then trying to add the roles, the NT System and the Windows Internal database user had access denied issues on 100+ registry keys when trying to add the roles. After that the system is not behaving normally.
    The errors displayed almost mirror the errors that would occur on Windows 2012 when those two roles would be added which of course is officially NOT supported on that system.
    This blog needs serious revision:
    http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
    This is the excerpt from that blog: Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller.  In addition, we published
    guidelines for how RD Session Host could be used without the RD Connection Broker.
    Microsoft Support was curteous and helpful and they were the ones who advised cutting our losses, which mirrored my hunch after seeing what was transpiring in the system.  They refunded my money for the support call. 
    For me, it was an opportunity to find out if there was any way to configure Windows 2012 R2 in the Same manner that it was setup as Windows 2008 R2 and lay that to rest. The coexistence is poorly implemented. It is as if there was a reaction from all the deprecation
    of bread and butter features such as shadowing in TS and the coexistence of AD DS and RDS to where those features were re-added haphazardly. (I have no complaints on shadowing on Windows 2012 R2 it works, just do not like having to go to server manager to
    use it).
    I opted for virtualizing the Domain controller to eliminate the incompatibility issues and that is what I will be doing from now on. I found free solutions for backing up and reporting for virtual machines as well as the suggested procedures for configruing
    a Domain controller as a virtual machine on a Hyper-V environment and I will be sticking to those. Thus far the setup has been operational.
    I am not allergic to virtualization, but for really small setups it adds additional time and considerations but if that is how it has to be done, so be it. Windows 2008 R2 days are numbered and since we can usually squeeze 5-7 years on quality server equipment,
    buying a Windows 2008 R2 setup now is a borderline disservice in my opinion.
    Hopefully someone finds this useful and saves some time.

    Hi,
    Thank you for posting in Windows Server Forum.
    Do you need any other assistance?
    Based on your description, you are describing your story of successfully implementing RDS server with AD role and more regarding all RDS related scenario. For shadowing feature, you can use with command also. Below is the syntax to shadow a session.
    mstsc /v:<ServerName> /shadow:<SessionID>
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

Maybe you are looking for