Add Routing Rule

how to create new routing table?
how to add routing rule to route table?

Hi!
I supose your network configuration is OK.
I have some problems in order to configure mine under Solaris 10. But trying to change this, I found something that can help you.
In a terminal window, type "man route". I could add a new one, but, because I am not able to find how to change the IP gateway, it returns me an error.
I hope this can help you
Zenaida

Similar Messages

BRF+ Routing Rule not showing Expression

Hi Experts,
I am trying to create a BRF+ routing rule (line item by line item) within SAP Standard Process ID - SAP_GRAC_ACCESS_REQUEST
The purpose is to use it as a detour based upon Role attributes. Although the rule is generated in ABAP screen, when I try to modify BRF+ rule, the Expression where decision table is located, not coming up.
When I test it, it gives error - Expression not set.
What could be the issue? Need your help.
Thanks & Regards,
Sabita

Hi Sabita,
Definitely look up those courses! I'm an instructor for them in the UK and these sorts of questions are exactly those which most people ask on the courses!
GRFN_MW_S_ROUTING is a structure which contains those two fields. This should be the Result Data Object which will then automatically place those two fields as the results.
The Condition columns are user driven inputs where you give the criteria for the routing rules e.g. Business process or role criticality etc.
For routing rules or initiator rules, there are two sources for the information; the request header (attributes of the request) or the request line items (attributes of the roles on the request). There are some fields which may exist in both (e.g. Business process for the access request or the business process assigned to the Role) which explains why there are duplicates in the list. When selecting the conditions, scroll right to the bottom of the list and you'll find the Structures which show Header or Line Item. If you expand those, then you will see the list of fields again. By doing this, you'll know whether you're looking at the header or line item field.
Select the appropriate fields as the columns and then add in the rows to identify the specific criteria.

How is an Order Routing rule connected to the IC Webclient Profile

I created a simple ERMS order routing rule that If priority equals very high then route to John Smith whom is assigned to the IC Web position in PPOMW.
When I create a service ticket and mark it very high and choose the ESCALATE button the message no rule for routing was found.
I don't see anyway to connect this rule to our IC Webclient profile, or why the rule wasn't envoked. Will give points.
Edited by: John Burton on Apr 21, 2008 2:54 PM

Hello Glenn,
Yes, you are correct. In addition to creating a Rule Modeler policy via the IC Manager role (accessible from the BSP view or Enterprise Portal), the business user also needs to request that IT (or someone) add the name of the Rule Modeler policy as an attribute of the RE_RULE_EXEC service for the applicable Service Manager profile in the IMG configuration for the relevant Rule Modeler context (Order Routing, ERMS, etc.). I certainly agree with you that the business user and the IT user as generally two different people. And if they are the same person, Sarbanes Oxley probably has something to say about that Your point is definitely valid. Perhaps in the future we need to be more considerate of the distinction of job responsibilities of business user versus IT user when designing products and solutions.
By the way, just as an aside... some Rule Modeler contexts can only use one Service Manager profile (for example Order Routing must always use a Service Manager profile called "SAP_ORDERROUTING") while other contexts can use multiple Service Manager profiles. For example, as of CRM 2005 (CRM 5.0) it is possible in transaction CRMC_ERMS_SM_PDET to assign different Service Manager profiles directly to different inbound email addresses for ERMS. And by assigning a different Rule Modeler policy to each Service Manager profile, you can use different root/default Rule Modeler policies for each incoming email address.
Warm regards,
John
Edited by: John Burton on May 1, 2008 10:01 PM

Report router rules and drop off library in Sharepoint

Hi,
I am running the report from the Report Setting link in Duet Enterprise. I get the message saying, 'The report has been submitted for processing and will be delivered to your Reports page".
But i am not getting any reports in the reports page. After googling, i got to know that i will have to confiure the Report Routing rules for the same. Also a Drop off library needs to be maintained.
Could anyone please explain the detailed steps for doing both these activities? Being a SAP expert, i dont know much about SharePoint sites.
~ Ramanath

Hi,
lets perform some checks to see where we are actually failing.
The error
User may not be a Duet user.
SAP system not configured or changed on add-on.
SAPID passed was not present in the master system.
means that somewhere on the server where the report is running the information that is retrieved from the SCL server is not correct. In your case these two systems (the server that is running the report and the SCL) are the same, but technically the flow is similar to the case that both would be on seperate system.
So the first thing I would check is if the RFC destination and the logical port that was configured is correct.
(all the following steps are done on the SCL in your case):
At first go to LPCONFIG and search for the Proxy Class: /OSP/CO_REP_ADAPTER_WSVI_DOCUM with Default Port checked.
Make sure that this logical port is active, then go to the Call Parameters tab. Here you should see in the HTTP Destination an entry IWCNT_REPT_ACT_HTTP_DEST.
Double click on that (don't save any changes if you get a prompt) and you will end up in SM59. Here you should see in the target host field the hostname of the SCL server. Under Service No. the HTTPS Port of your SCL system and finally in Path Prefix you should see something like this:
/sap/bc/srt/pm/iwcnt/repadapterwsvi_document/001/duet_enterprise_assertion/1/binding_t_https_a_http__-iwcnt_-repadapterwsvi_document_duet_enterprise_assertion
Before performing a connection test, go to the "Logon & Security" tab. Here you should see in the "Logon with Ticket" secion "Send Assertion Ticket for Dedicated Target System" checked and also SSL Active in the Status of Secure Protocol. The SSL Certificate is set to "ANONYM SSL Client (Anonymous)".
If that is all the case, then click on "Connection Test". The result should be a HTTP 415.
Let me know if that helps.
Regards,
Holger.

Extending routing rules

Hello All,
Just wondering how to extend routing rules and route the message to a inbuilt legacy system and The out of the box PIP provide integration between two systems say siebel and EBIZ, customer also wanted to route the message to a legacy system, do i need a develop a Custom EBS or add new routing rule to EBS?
Would appreciate your help..

I have not used the PIPS but within the AIA Foundation Pack (v2.4) there is a concept of creating an EBF (Enterprise Business Flow) in the docs. It is summarized as
"An EBF is needed when an enterprise business Service (EBS) operation needs to be implemented with a set of tasks and involves invoking of multiple services. An EBF can invoke only another EBS. In no situation should an EBF invoke and ABC service directly."
This may be possible, if not then adding a routing rule to the ESB/Mediator Service would seem the logical step.
HTH

Cisco ASA 5505 VPN connection issue ("Unable to add route")

I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.
Setup:
* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.
I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.
First I tried with the built-in ASDM IPSec Wizard, instructions found here.
VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself).
Client logs show following error messages:
1 15:53:09.363 02/11/12 Sev=Warning/3     IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:53:13.593 02/11/12 Sev=Warning/2     CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination     192.168.1.255
Netmask     255.255.255.255
Gateway     172.16.1.1
Interface     172.16.1.101
3 15:53:13.593 02/11/12 Sev=Warning/2     CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100165, Gateway: ac100101.
4 15:54:30.425 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
5 15:54:31.433 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
6 15:54:32.445 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
7 20:50:45.355 02/11/12 Sev=Warning/3     IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
8 20:50:50.262 02/11/12 Sev=Warning/2     CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination     192.168.1.255
Netmask     255.255.255.255
Gateway     172.16.1.1
Interface     172.16.1.100
9 20:50:50.262 02/11/12 Sev=Warning/2     CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100164, Gateway: ac100101.
I've already tried the suggestions from this link, although the problem is different there (as the user can still access the internet, even without split tunneling, which I cannot).
A show run shows the following output (note in the below I have tried a different VPN network: 192.168.3.0/24 instead of 172.16.1.0/24 seen in the Client log)
Result of the command: "sh run"
: Saved
ASA Version 8.2(5)
hostname AsaDWD
enable password kLu0SYBETXUJHVHX encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group DW-VPDN
ip address pppoe setroute
ftp mode passive
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip local pool DWD-VPN-Pool 192.168.3.5-192.168.3.15 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group DW-VPDN request dialout pppoe
vpdn group DW-VPDN localname fa******@SKYNET
vpdn group DW-VPDN ppp authentication pap
vpdn username fa******@SKYNET password *****
dhcpd auto_config outside
dhcpd address 192.168.2.5-192.168.2.36 inside
dhcpd domain DOMAIN interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DWD internal
group-policy DWD attributes
vpn-tunnel-protocol IPSec
username test password ******* encrypted privilege 0
username test attributes
vpn-group-policy DWD
tunnel-group DWD type remote-access
tunnel-group DWD general-attributes
address-pool DWD-VPN-Pool
default-group-policy DWD
tunnel-group DWD ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3e6c9478a1ee04ab2e1e1cabbeddc7f4
: end
I've installed everything using the CLI as well (after a factory reset). This however yielded exactl the same issue.
Following commands have been entered:
ip local pool vpnpool 172.16.1.100-172.16.1.199 mask 255.255.255.0
username *** password ****
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 43200
isakmp enable outside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp nat-traversal
sysopt connection permit-ipsec
sysopt connection permit-vpn
group-policy dwdvpn internal
group-policy dwdvpn attributes
vpn-tunnel-protocol IPSec
default-domain value DWD
tunnel-group dwdvpn type ipsec-ra
tunnel-group dwdvpn ipsec-attributes
pre-shared-key ****
tunnel-group dwdvpn general-attributes
authentication-server-group LOCAL
default-group-policy dwdvpn
Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.
I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...
The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
Does anyone know what's going on?

Yes, I have tried from a different laptop - same results. Using that laptop I can connect to a different IPSec site without issues.
Please find my renewed config below:
DWD-ASA(config)# sh run: Saved:ASA Version 8.2(5) !hostname DWD-ASAenable password ******* encryptedpasswd ****** encryptednames!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group DWD ip address pppoe setroute !ftp mode passiveaccess-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.224 pager lines 24logging asdm informationalmtu inside 1500mtu outside 1500ip local pool vpnpool 192.168.50.10-192.168.50.20 mask 255.255.255.0icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00timeout floating-conn 0:00:00dynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.2.0 255.255.255.0 insidehttp 0.0.0.0 0.0.0.0 outsideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map outside_map interface outsidecrypto isakmp enable outsidecrypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400telnet timeout 5ssh 0.0.0.0 0.0.0.0 outsidessh timeout 5console timeout 0vpdn group DWD request dialout pppoevpdn group DWD localname *****@SKYNETvpdn group DWD ppp authentication papvpdn username *****@SKYNET password ***** dhcpd auto_config outside!dhcpd address 192.168.2.10-192.168.2.40 insidedhcpd enable inside!threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptwebvpn enable outside svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpngroup-policy dwdipsec internalgroup-policy dwdipsec attributes vpn-tunnel-protocol IPSec default-domain value DWDDOMusername user1 password ***** encrypted privilege 0username user1 attributes vpn-group-policy dwdipsectunnel-group dwdipsec type remote-accesstunnel-group dwdipsec general-attributes address-pool vpnpool default-group-policy dwdipsectunnel-group dwdipsec ipsec-attributes pre-shared-key *****tunnel-group dwdssl type remote-accesstunnel-group dwdssl general-attributes address-pool vpnpool!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options !service-policy global_policy globalprompt hostname context no call-home reporting anonymousCryptochecksum:f5c8dd644aa2a27374a923671da1c834: endDWD-ASA(config)#

Mail crashes when I try to add a rule

I'm running 10.6.8. I have a somewhat large and complex mail folder. Everytime I try to add a rule mail gives me the spinning beach ball of death. I'm tried throwing away the rule plist. I've tried a clean install on a new disk with nothing on the disk added except firefox and flash. I've been on the phone with Applecare numerous times. Anyone have any ideas? Should I just give up?
Does anyone know if Mail has a size limit for mail or for how many layers folders can be nested?
Keith Sanborn

can't make much of this crash log but try this. when you get to the smtp server page in setup assistant hold option while clicking "create" or 'continue". this will skip the actual server validation and might prevent crashing.

Asynchronous routing rules fails in soa suite 10.1.3.5.1 on wls 10.3.1

Hi,
I have been testing my 10.1.3.4 esb projects in soa suite 10.1.3.5.1 on wls 10.3.1 and these fails when I have an asynchronous routing rule,
i made a simple test project with a jms dequeue adapter and a router with asynchronous routing rule to a file adapter.
Thanks Edwin
oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: Failed to enqueue deferred event "oracle.tip.esb.server.dispatch.QueueHandlerException: Publisher not exist for system "{0}"
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.deferEvent(InitialEventDispatcher.java:719)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(InitialEventDispatcher.java:636)
     at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:90)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:172)
     at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:2011)
     at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1470)
     at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:122)
     at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:68)
     at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(ESBListenerImpl.java:726)
     at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(ESBListenerImpl.java:411)
     at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:358)
     at oracle.tip.adapter.jms.inbound.JmsConsumer.doSend(JmsConsumer.java:718)
     at oracle.tip.adapter.jms.inbound.JmsConsumer.sendInboundMessage(JmsConsumer.java:586)
     at oracle.tip.adapter.jms.inbound.JmsConsumer.send(JmsConsumer.java:402)
     at oracle.tip.adapter.jms.inbound.JmsConsumer.run(JmsConsumer.java:321)
     at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
     at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
     at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.tip.esb.server.dispatch.QueueHandlerException: Publisher not exist for system "{0}"
     at oracle.tip.esb.server.dispatch.JMSEnqueuer.createConnection(JMSEnqueuer.java:200)
     at oracle.tip.esb.server.dispatch.JMSEnqueuer.<init>(JMSEnqueuer.java:110)
     at oracle.tip.esb.server.dispatch.JMSEnqueuer.<init>(JMSEnqueuer.java:82)
     at oracle.tip.esb.server.common.RuntimeESBSystem.getDeferredEnqueuer(RuntimeESBSystem.java:404)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.deferEvent(InitialEventDispatcher.java:708)
     ... 20 more
Caused by: oracle.jms.AQjmsException: JMS-243: Topic OracleASjms/ESBDeferredTopic niet gevonden.
     at oracle.jms.AQjmsError.throwEx(AQjmsError.java:353)
     at oracle.jms.AQjmsSession.createTopic(AQjmsSession.java:2293)
     at oracle.tip.esb.server.dispatch.JMSEnqueuer.createConnection(JMSEnqueuer.java:185)
     ... 24 more
Caused by: oracle.jms.AQjmsException: JMS-190: Wachtrij ORAESB.OracleASjms/ESBDeferredTopic niet gevonden
     at oracle.jms.AQjmsSession.getTopic(AQjmsSession.java:5084)
     at oracle.jms.AQjmsSession.createTopic(AQjmsSession.java:2286)
     ... 25 more
Caused by: oracle.AQ.AQException: JMS-190: Wachtrij ORAESB.OracleASjms/ESBDeferredTopic niet gevonden
     at oracle.AQ.AQUtil.throwAQEx(AQUtil.java:196)
     at oracle.AQ.AQOracleSession.getQueue(AQOracleSession.java:721)
     at oracle.jms.AQjmsSession.getTopic(AQjmsSession.java:5059)
     ... 26 more

Edwin,
I received the same error when soa10g_server1 starts.
I changed in ESB_PARAMETER table on ORAESB schema the following parameters:
PROP_NAME_CONTROL_TCF_JNDI     OracleASjms/ControlTCF
PROP_NAME_MONITOR_TCF_JNDI     OracleASjms/MonitorTCF
PROP_NAME_ERROR_TCF_JNDI     OracleASjms/ErrorTCF
PROP_NAME_ERROR_RETRY_TCF_JNDI     OracleASjms/ErrorRetryTCF
PROP_NAME_DEFERRED_TCF_JNDI     OracleASjms/DeferredTCF
PROP_NAME_ERROR_XATCF_JNDI     OracleASjms/ErrorTCF
PROP_NAME_DEFERRED_XATCF_JNDI     OracleASjms/DeferredTCF
to
PROP_NAME_CONTROL_TCF_JNDI     ESB_CONTROL
PROP_NAME_MONITOR_TCF_JNDI     ESB_MONITOR
PROP_NAME_ERROR_TCF_JNDI     ESB_ERROR
PROP_NAME_ERROR_RETRY_TCF_JNDI     ESB_ERROR_RETRY
PROP_NAME_DEFERRED_TCF_JNDI     ESB_JAVA_DEFERRED
PROP_NAME_ERROR_XATCF_JNDI     ESB_ERROR
PROP_NAME_DEFERRED_XATCF_JNDI     ESB_JAVA_DEFERRED
And It's working right now. I hope to you too.
JP

Incoming email - Routing rules on exchange server 2003

I am configuring SAP system to receive emails as per note 455140. We currently have only one client and have updated necessary profile parameters including setting SMTP port to 25 for incoming mails. We have specified our enterprise exchange server 2003 as the mail server in SCOT transaction and are able to send out emails from SAP without issues, but cannot receive emails in SAP.
Following note 607108, I am able to receive emails in the SAP system using telnet test (by passing mail server), thereby I believe all relevant configuration settings in SAP system have been correctly maintained. Now, if I try to send an email to SAP user from another SAP system or Microsoft Outlook or Internet, these emails are not being received in SAP. No inbound traces are generated in SAP since the mail has not been received by SAP.
As part of the config, our server admins have set up a rule on mail server to forward specific emails to SAP system. Does anyone have any insight into what might be the issue here? Also, if someone can provide links/directions on how to setup routing rules on exchange server 2003 to forward specific requests to SAP system (I believe this is where our issue is).
Thanks!
Fahad

Hello Markus,
By specific, I meant emails addressed to specific users need to be forwarded to SAP. Instead of specifying *ATcompany.com --> WebASHost:25000, we put in a rule userATcompany.com --> WebASHost:25000
Based on your response, I asked SAP support whether there is such restriction when SU01 email address and exchange email address are same, exchange will not forward to SAP. Below is there response
"SAPconnect like most mail platforms route mails via the email address.
SAP recommends the following:-
UserATClient.SID.company.com
I know that a DNS entry will have to be written for this to be routed
to your Exchange server for relay into SAP.
The only other recommendation is to use the local part of the mail
address to route the mails. This will not require an external DNS
entry but every new user will have to be updated in Exchange.
User.client.sidATcompany.com
There are no other way of correctly routing mails other than these
methods. Thank you."
Now SAP says when email addresses are same and if we put in a rule based on local part of the mail, it should still forward.
Since the issue is through exchange, SAP will not provide further support to resolve this and we cannot go with sub-domains currently due to business requirements.
Any suggestions.
Thanks,
Fahad

Add update rule for new key figure in one info struc

Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric

1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated.

11g mediator enrichment, passing parameters between routing rules

Hi,
I am trying to make mediator enrichment work with a sync request / response service, One-way enrichment works perfectly in PS1.
So I have a few routing rules and try to use the response data of the previous routing in the next routing and end with a echo request.
For this I am trying to pass on variables between routing rules. but is seems that an assign and xslt variables. only live inside the routing rule.
I am trying the hack the mplan file to make this work but without any luck.
Is this possibe and how.
Thanks Edwin

Can we write more than one routing rule in a RS?

Can we write more than one routing rule in a RS?

You can specify multiple routing rules for a single operation of a routing service. If no filter is applied, they are all executed. For routing rules with filters, only the target operations for which the filter condition holds are invoked. Priority is based on the order in which they appear in the routing rules window.
Ronald

Routing Rule

Hi,
I have an idoc imported in XI. It comes with standard message type while importing .
I need to route this IDOC to two different systems. But the problme is the Message type is different for both of this system, but the IDOC type is same.
And the RCVPRN is also different.
Isit possible to put in Routing rule as the IDOC message type can\t be changed.
Regards,
Anandh

Hi,
You need to use two seperate Message Mappings as while processing the IDOCs via receiver determination to receiver SAP system, it will check for the IDOC Metadata.
If the IDOC metadata i.e including the Message Type for Basic IDOC Type will not be matched then that would create problem while processing the idoc.
Even if the control records are manipulated as per the required Message Type and the RCVPRN, you need two different Mappings as well as seperate receiver determinations.
Thanks
Swarup

Error in Invoking all the routing rules if one of them fails

Hi,
I have an ESB which has 4 routing rules to route to 4 different systems. If one of my routing errors out, other routing rules are not getting executed. For ex, if my ESB system has 4 different traget systems and 4 routing rules. If there is an error in invoking system 2 then, system 3 and system 4 routing rules are not getting executed. How to make them(system 3 and system4) executed even when there is error in some other invocation of system(system 2)?
Kindly reply asap as it is urgent.
Thanks,
Lakshmi S

You can't in that way, if you want to make them independent in ESB build 4 different services using the same source otherwise you have to build BPEL app for that.

Limitations on Using Human Task advance routing rules and stages

In one of our requirement we have used human task with different number of stages (14 stages ) and for all this we are using only one human task component and to route the task through different stages I am using advance routing rules (30 rules),we have exposed this through bpel .My code is working fine .
My question is:-
1- Do this kind of design contain flaws, is there is any restriction on using of number of stages and number of routing rules. Is there is any best practise which suggests that we cannot have more than certain number of stages or routing rules..??
2-Is it feasible to use different human task component for each of the human task stages and route the data using business rule, but that will be very exhausted and unnecessarily making bpel heavier, also the front end people will be having more number of bpm urls which will make their work tedious.
Please suggest .
Thank you

This doesn't sound good. That's an EJB internal to BPEL if I'm not mistaken. Did the install go ok? Has this ever worked before?
I'd check the logs on startup for any sign of an exception. This may be the symptom of a problem which will be logged on startup.
Also, search metalink and open an SR -- this EJB isn't something you need to configure in a normal install -- at least not that I'm familiar with.

Add Routing Rule

Similar Messages

Maybe you are looking for