Add SAMBA to Windows 2008r2 domain as subdomain

Hi,
Can i use the SAMBA as the Windows subdomain? How to do it.
Thanks.

Older Samba versions could not cooperate with AD, because of they comply with old NT 4 model.
Perhaps better platform for this topic is Samba wiki, forums and jornals. For Samba 4 read
http://www.linux-magazine.com/Online/Features/What-s-New-in-Samba-4
Rgds
Milos

Similar Messages

Binding to Windows 2008r2 domain gives wrong kvno

I'm getting inconsistent results binding a 10.6.6 system to a windows 2008r2 domain with two DCs. The domain join always appears to work, but in some cases I'm not getting a usable /etc/krb5.keytab file. The upshot is that I can't use GSSAPI with ssh to access the mac from other unix systems.
In the failure case, the KVNOs in /etc/rb5.keytab disagree with the values in AD. Using 'klist -k -t' on the mac, I see all the KVNOs are 1, but looking on the windows side with ADSIedit, the msDS-KeyVersionNumber on the computer account is 2.
In the success case, there are duplicate entries for all the keys in the Mac keytab file, one set with KVNO 1 and one set with KVNO 2, windows reports KVNO 2, and everything (ssh) works.
This also affects kerberos console logins with the /etc/authorizations 'builtin:krb5authenticate,privileged' patch (krb5authnoverify works in both cases).
I have inconsistent results with Directory Utility (sometimes I get a working krb5.keytab and sometimes I get the broken one). I haven't seen any rhyme or reason to the behavior. I go away for awhile, and maybe it works when I come back (and maybe not). But never an error; DU always thinks it successfully bound. As an aside, with dsconfigad I always get the broken keytab file.
Any assistance is most appreciated. Thanks!
David Thompson
The University of Wisconsin-Madison
Waisman Brain Imaging Lab

Thanks for your reply!!
Yes! I have done it both ways but still the same thing. Now, something interesting, since I'm in the initial setup of the Domain, I decided to reconfigure it to be mydomain.net, instead of mydomain.local. Now I try to bind and I get an error saying that the DNS name forest is incorrect. However, I cannot change the Directory forest from the default value, which is Automatic. So now, I wonder if its that the domain name needs to be set to my.domain.net rather than mydomain.net. I'm lost here.

Is it possible for Windows 2008R2 Domain Controllers to audit when a programs are installed/uninstalled on clients and send alerts to Admins?

We have a program called Audit Wizard that we used with Windows 2003 that monitored all clients and alerted my department when a program was installed/uininstalled. since upgrading to windows server 2008R2, the program no longer works correctly.
So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
If so, How?
Thanks in advance for your help!
Pete Macias

Hi Pete,
>>So we are wondering if it is possible for Windows 2008R2 Domain Controllers, running at a 2008R2 forest and domain level) to be able to audit when a programs are installed/uninstalled on clients and send alerts to our Admins?
As far as I know, group policy can't help us do this. If you are interested, we can take a look at System Center Operation Manager and ask for suggestions in the following SCOM forum.
Operations Guide for System Center 2012 - Operations Manager
https://technet.microsoft.com/en-us/library/hh212887.aspx
System Center Operation Manager
https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SAP IDM 7.1 SP4 and Windows 2008r2 domain controller

Hello,
in the PAM and in the SAP NetWeaver Identity Management IDM Connector Overview i can't find any information about its possible and supported to provisioning user and groups to an 2008r2 domain controller?!
is it supported?
best regards
thomas berger

AllowSSBToAnyVolume isn't a key but a value under the key SystemStateBackup. So make sure you have the following:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wbengine\SystemStateBackup
Name: AllowSSBToAnyVolume
Data type: DWORD
Value data: 1
Is that the case?
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Arch Samba - Windows 2008 Domain

I have made the thread bellow thinking i solve my problem giving access on FTMG...but unfortunately nope...
https://bbs.archlinux.org/viewtopic.php?id=107350
My Situation:
3 Servers on Windows 2008 Domain (Example: 192.168.1.1 / 2 / 3)
1.1 - DC
1.2 - Exchange
1.3 - ISA FTMG (Gateway to all servers)
1 Arch Server for Backup (Samba Share PUBLIC) - 192.168.1.4
And my problem is annoying at least, i go to one of my windows 2008 servers and push on explorer \\192.168.1.4\Backup and sometimes fully work without any problem... and another times (let's say 5 minutes after i push again) and:
Network path could not be found
or
xx.xx.xx.xx is not setup to establish a connection on port "File and Print Sharing (SMB)"
BUT FROM THIS WINDOWS 2008 SERVER IT PINGS 192.168.1.4
AND
TRACERT GO DIRECTLY TO 192.168.1.4
And if i try and try eventually it will work again.....can't damn understand what's going on with this.....
On ISA I gave FULL ACCESS to my servers to go where the hell they want and even so......
Thanks in advance for all the help....yep i need it.
Sniff

KimTjik wrote:
I'm sorry I didn't know that this wasn't covered in the Wiki. When I get some time I'll probably add something about. No neither of those links are correct. You already have one DC, a native Windows server, and the second one isn't necessary (you don't need to join the whole Linux workstation to the domain, just the Samba service; the Samba service will with hostname be recognized as a stand-alone server).
In lack of an appropriate Wiki entry Samba's own How-to is better: http://www.samba.org/samba/docs/man/Sam … ember.html
Look for this section: "Joining an NT4-type Domain with Samba-3"
Even that How-to might be confusing since it covers all kinds of configurations at the same time. What you need, as far as I can understand your description, is only what's written in that section.
Start with the strings in smb.conf for domain, password server (in your case probably the DC itself) and security set to domain. Restart samba and the you need to know an administrator account (user and password) and fill it in to the command example shown, e g "net rpc join -S DOMPDC -UAdministrator%password". If everything works you should get confirmation about it. You could also double-check the AD on the DC and see if the Samba server is added.
See if you get this to work.
OK, sorry for the delay in my answer but i was traveling and couldn't test the above in the production environment.
I have add the backup server to the domain successfully but that was not the problem.
Now i have full details and maybe you could give your opinion:
FTMG (Forefront Threat Management Gateway)
SWITCH LAYER 3
SERVER BACKUP----------------------SERVERDC---------------------------SERVEREXCHANGE
THE PROBLEM is that if the DC have a share or exchange, everything works ok \\dc or \\exchange, but if you try to connect to the share archserver the connection drop quite often \\archserver
WHY? Because after some trace in FTMG, the microsoft firewall consider that the archserver is doing spoofing, yes is on the same network as all servers, same domain as above help, trusted...etc.
SOLUTION? First i give permissions on the firewall to the archserver (ALLOW ALL /PROTOCOLS ETC), but even so the FTMG was intercepting all the requests to the archserver and still consider him spoofing...odd enough no??!! By the way the FTMG Server control all network, is the gateway to all servers and switching.
Are you thinking to change the gateway to archserver or just don't put any....yep same result, FTMG catch archserver still.
I gave up and come with my actual solution (VLAN or BACKUP NETWORK), all servers with a extra ethernet card dedicated to the backup network or vlan just to backup without the firewall going there to trace anything.
And that's it....
But my question to you all is, everytime that we have a linux server (share) together with FTMG in same network do you have the same result, it seems to me like FTMG have something like: IT'S LINUX / GET BLOCKED.
Thanks for your help and patience regarding my answer.
TD (Sniffer)

Stop Client computers from automatically shutting down. 2008R2 domain Window 7 Clients

Computers are shutting down after being idle for a while. I cannot find the GPO setting. Runnining a 2008R2 Domain. I want to prevent the computers when idling from shutting down.
Thank you,
Gil Davis
Tillamook

Hi Gil Davis,
How is it going? I agree with Milos. Besides, we can run command gpresult/h gpreport.html
with admin privileges to collect group policy result report to check if some policy settings were configured to affect this.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows 7 PC locking out domain user in Windows Server 2008r2 domain

I have reviewed dozens of related questions, but none have given me an answer that works on this situation.
We replaced an XP desktop with a Windows 7 desktop. It keeps locking out just user(of over 25 migrated). I have disabled the Windows 7 credentials, made sure the patches were in place, there are no other devices-wireless or otherwise.
The users pc has a kvm attached for another system, we have a Windows 2008r2 server. The user does not save any passwords, I have make changes recommended in the registry. They do have a couple mapped drives. Logs show that it is the users
pc that is causing the lockout, but much of the users time they are on the other system. We have 4 other users that have the exact same setup but are not having any issues. It happens several times a day and I must unlock their password on the
ad. Sometimes if we wait 45 min or so it will unlock itself. Strange considering settings lockout user after 5 bad passwords and lock them out for 120 minutes.
I have tried virtually everything I have read relating to this issue in Win7, 2008r2.
User is getting frustrated and so am I!.
Thank you.
Rebecca Palmer

Try using this tool (free for limited period) and check if you can trace from where the account is getting locked :
http://www.netwrix.com/account_lockout_examiner.html
http://www.sophos.com/en-us/products/free-tools/conficker-removal-tool.aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Exchange 2007 on Windows 2008R2 with Windows 2012 DC

Hi All,
I am going to update DC from Windows 2003 Sp2 to Windows 2012 R2 (Add a new Windows 2012 DC at first and turn off Windows 2003 DC after). Just think about our Exchange server, which is Exchange 2007 SP3 (08.03.0297.001) on Windows 2008R2 SP1. Do I need
update Exchange to 2010 or I can keep it as is?
Thanks,

What service pack, what rollup?
With SP3, RU13, you should be OK for the domain controller itself:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
However...
The domain / forest functional level cannot be at Windows 2012 R2.
Maybe that will be supported in a future rollup (?).
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How to add the zorin os and domain server 2008

Since Zorin is just a flavour of Ubuntu you should be able to use any of the guides for adding Ubuntu to Active Directory. You can use Samba, Winbind, LikewiseOpen or another package to add it.
Here is some more information: http://askubuntu.com/questions/33592/how-do-i-join-a-windows-active-directory.

how to add the zorin os and domain server 2008
kindly help as
This topic first appeared in the Spiceworks Community

How to Delete Non-System State Backups in Windows 2008R2

Hello,
I am running a Windows 2008R2 server which uses Windows Server Backup to do the backups. We are using the backup-tool to create non-system state backups of the data-directories on this machine. The backup is done on a dedicated disk connected through iscsi
(to a Synology box). This backup disk has become too small and we have now replaced the Synology box with a bigger one. Here i created a new LUN again for the backup purposes.
Now for my question; The wbadmin.exe tool supplied with W2008R2 does not offer a way to delete the old backups. I know that in Win2012 (which we we also have running) I could add the new iscsi location and then (when enough backups are available on the new
target) use wbadmin.exe delete backup to delete the old non-system state backups; e.g.
wbadmin delete backup -version:08/07/2013-21:00
This (very undocumented) feature of Windows 2012 and higher works quite nice and is exactly what i am searching for on the W2008R2 machine; a way to delete the old backups (and under the hood delete the corresponding snapshots)
I've done quite a bit of research and it should be possible to do something similar in 2008 but then manually, The howto is described in the following link: http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx .
Basically it describes that you should use DiskShadow.exe to remove e.g. the oldest snapshot with a command like :
Delete shadows OLDEST \\?\Volume{7fc1871b-2e1f-11dd-a339-001e4fb7af35}
Windows Server backup (wbadmin) should then on the next run 'see' this deletion and update its list of available backups:
"You can perform the same steps manually to delete backups on demand. However, the backup catalog update cannot be done manually and it will happen instead during
the next backup."
I've done this on our box and it indeed removes the shadows from the list. However, in the Windows Backup 'dashboard' it still lists the backups as available. Also after a new backup has finished (according the the article this is when it should 'update'
its backup catalog). When I try to restore a backup from a date that i just removed it gives a nice message that this is impossible because the snapshot is not available (duh :)) ;
Unable to browse Local disk. The shadow copy of the backup stored on the backup destination cannot be found.
So it seems that the aforementioned method works; it removes the snapshot and frees diskspace, but it doesn't update the Windows Backup catalog. As a result the management tool (GUI) still lists the backups which are no longer available! How can i change
this? Is there any way to do this? I found one article which mentions that the Dashboard bases its screen on the Windows Logs and not on the actual VSS snapshots available:
http://forum.wegotserved.com/index.php/topic/23757-start-afresh-with-server-backup/ (WHS) In my situation however this seems unlikely because i don't have any logs that date back as far as my backups go.
In my opinion this is a real bug and it leaves us with a in-consequent backup schema. Does anyone have similar situations or even a solution to my problem?
Kind Regard, Martin

Hi Mandy,
Yes! I think i got my answer and I now get how windows backup works in Windows 2008 :-) It turns out that I dismissed some suggestions a bit too soon. The answer lies in the command mentioned earlier :
Wbadmin delete catalog
This command does delete all the backups from a perspective of the Windows Backup UI, but leaves the VSS snapshots intact. This means that the backups are still available, but you just can't restore them with the User Interface. In order to 'update' the
UI with the current available snapshots (which you can list with diskshadows list shadows all), you have to re-add the existing media on which the backups took place using the Wizard of the UI. It will then inform you that existing backups are available and
if you want to keep these for restore purposes. If you click 'yes', and THEN perform a backup ... All the current available backups will be shown in the User Interface :-)
So for my steps taken to change from one iscsi (iscsi1) to another (iscsi2):
- Add the 2nd iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Add more backup destinations -> iscsi2
- Remove the 1st iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Remove current backup destinations -> iscsi1
- Run some backups on the new destination. Old restore points are now still available. When enough restore points are available on the new volume iscsi2 start deleting old data from iscsi1 as follows:
- Run diskshadow
diskshadow
- list all the current snapshots
list shadows all
- remove all the snapshots of iscsi1 (repeat until all shadows are gone of iscsi1)
delete shadows oldest \\?\volume{yourvolumeid}\
- delete the windows backup catalog
wbadmin delete catalog
- Restart the windows backup UI and re-add your schedule on the new volume iscsi2. It will now ask if you want the keep the existing data for restore purposes; click yes.
- After the next backup only the backups of volume iscsi2 will be listed and everything is fine !
I Hope my post will help others with similar questions. It was quite a search before I understood the way it works. Basically as long as your VSS snapshots are still available and listed by diskshadow you still have the backups and you will be able to get
this in sync with the steps above (delete schedule and re-add originating targets containing the snapshots). After the next backup the UI will update itself.
(In my case someway along the way I lost my originating snapshots, but because I already had my new backup set it didn't bother me; It kept me from having to delete all 510 old backups :) with diskshadow)
Regard, Martin

SMB connection to Windows 2008R2 File Server Problem

Hello, I recently migrated a file server from Windows 2003 to Windows 2008R2. Since the migration, I can no longer use our Canon multi-function printer to scan documents to a network share on the new file server. The share has Everyone, System
and Authenticated Users set to Full control and the NTFS Security is setup for Everyone to modify. The connection from the Canon uses SMB using a domain account called jdoe.
I wondering if the problem is related the the LAN Manger authentication level settings. On the new file server and domain controllers it's set to Network security: LAN Manager authentication level is set to Send NTLMv2 response only\refuse LM &
NTLM. I have setup a network capture and hope somebody can help me out with determinging the problem.
Here is the detals of the Error

It does seem possible that the NTLMv2 authentication level might be affecting things. So I would give it a try. It's difficult to troubleshoot from the image, but I beleive there is a flag in the negotiate response that might give you a clue.
In either case, I think your question would be better served by our networking group, rather than the group that makes the tool. While we have some general protocol knowledge, we don't have the depth that the experts for each component would have.
If changing that setting doesn't work we can move this thread over to the right place.
Thanks,
Paul

Cannot access CIFS shares from Windows 2008R2 on NSS3000

Hi,
I am trying to upgrade our 2008 domain to 2008R2 but with that last version we cannot access to cifs shares on the NSS3000. Access from all other clients are OK. It was 100% OK under 2008...
Whether I use the IP or the FQDN, I got an error from Windows 2008R2. From IP, I got "No process is on the other end of pipe." and from network Gui, I got "Windows cannot access \\nas0026CB647BC6. Check the spelling of the name...blabla. Details : Error Code : 0x80070035, The network path was not found".
On the NAS, I got this errors in the cifs logs :
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:48 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:48, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
It is likely to be an incompatibility between Windows 2008R2 smbv2 and the NSS3000 smbd but I can't find any firmware update and I can't find the process to allow in the registry.
I can ping it, I can connect on the web interface, I can connect on FTP but no CIFS at all.
Firmware version running is 1.20.1. Hardware rev : V03.
Any idea?

Hi SpaceBass, have you looked into sharepoints or into Netinfo manager. I have been playing around with sharepoints and it does let me enter non local users into the sharing prefs- albeit manually. Only thing is , depending on the number of macs you have, it could be a long and tedious job entering it all by hand. Netinfo may have an easier way, I'll do some more digging and post back.
Cheers.

Windows 2012 Domain Controller: Failed to open the runspace pool. The Server Manager WinRM plug-in might be corrupted or missing

Hi all,
We have been battling a problem for the last couple of days when we try to add the first windows server 2012 DC to an already existing Domain.
The Server installation goes smoothly and we can add the computer to the domain and its all green.
After we promote the server to a domain controller the WinRM service starts acting up (not responding anymore).
The server manager console shows Remote Management as disabled, and when we try to enable it via the console or Powershell it freezes up.
The AD DS part of the console is saying that there are post-promotion tasks that need to be completed but once we click on the task it takes us to the promotion wizard again, that basically complains that: Failed to open the runspace pool. The Server Manager
WinRM plug-in might be corrupted or missing.
In the Remote Management Event log we see the following entry: "The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)" Event ID 138
We are unable to do anything with the server (demote, add roles, remotely manage...). We tryed the following already:
1. Recreate from scratch
2. Checking the GPOs to see if there is anything setup about RM -> came up with nothing
We just ran out of ideas so HELP PLEASE !
BR
Tomaz Praprotnik

Hi Cicely,
Yes the error from the Windows Remote Management event log contains (I took out the User and FQDN of the Computer):
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:38:53 PM
Event ID:      138
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>138</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:38:53.786357100Z" />
    <EventRecordID>6876</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0003-D261-FD18382BCE01}" />
    <Execution ProcessID="1084" ThreadID="2924" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
</EventData>
</Event>
There is also another entry that sometimes comes up:
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:36:34 PM
Event ID:      142
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
WSMan operation Invoke failed, error code 2150859046
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>142</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>2</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:36:34.076973400Z" />
    <EventRecordID>6869</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0001-F328-FD18382BCE01}" />
    <Execution ProcessID="4888" ThreadID="4392" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
    <Data Name="operationName">Invoke</Data>
    <Data Name="errorCode">2150859046</Data>
</EventData>
</Event>
Best regards
Tomaz Praprotnik

SCEP 2012 Client in Windows 8 / 2012 - in Windows 2008 Domain- Not Syncing -/ Not Compatiable

Dear All ,
With lots of Hardship I had installed SCEp 2012 in Windows 2012 Virtual machine in WIndows 2008 Domain.
SCCM 2012 Server in Windows 2008 Server with Sql 2008 was - performing well and there was no issues until our COmpany planned to Convert the Windows 2008 Server to Windows 2012 Server ( AD is 2008)
WSUS is not Fully synching with SCCM 2012 ( previously it was )
Software Updates not pushing properly and to top all the SCEP client is not compatible with win 8.1 pro or win 2012 server
Error: Failed to download content id 16787046. Error: Access is denied.
Package:
Success: The software updates were placed in the existing package:
• Deployment Package(JUN2014)
Software updates that will be downloaded from the internet
Error: Update for Forefront Endpoint Protection 2010 Client - 4.1.522.0 (KB2780435)
Errors
Failed to download content id 16787046. Error: Access is denied.
Language Selection:
English
But the service account has full access - administrative rights and the administrator of the system
please advise on this

Hi,
All the software updates downloaded failed?
Are there any errors in PatchDownloader.log? If you use Automatic deployment rule, please also check ruleengine.log.
Please add the account with Full rights to the source share (both NTFS and Share permissions) where the Deployment Package is located.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Join a mac in a windows 2003 domain

Hi @ all
since over 20 years i work as systemengineer. with os , as:
novell netware,
microsoft dos , all versions
micosoft windows 3.1 up to windows 7 and all server versions from ms windows.
and was certified lotus notes domino developper
since 2008 i work at home with an macbook, and i love the macintosh very much.
So i have a new task in my company.
I have to integrate MacBooks, MacPro, Imac, all with the actual os, in our large windows 2003 domain.
Please give me help, how i can do this task.
1. How to install the AppleFileProtocol
2. Have i install the afp of all servers ? Domain Controllers, Fileservers, Printservers, Exchange Emailservers and so on ?
3. How can i manage the mircosoft ads with my macintosh.
Please give me a detailed answer. I need tips, and the solution, because i am very interested, that
we use more and more macintosh in our company.
Many thanks
Stefan .. from Germany

ok i can work until 19th of july
on my mac i update to os x lion. what is changed.
i try to connect with the 2008 windows fileserver and get the offer to connect 3 shares.
OK., i connect with 3 shares, and have of all the modify right
on one share i get no access. (could it be that the macuser guest is connected?)
the local username on the mac is the same username as in the win 2k3 ads
the passwort is also the same
since 10.7 lion there is no samba more,
So how can i connect without problems in the windows network.

Add SAMBA to Windows 2008r2 domain as subdomain

Similar Messages

Maybe you are looking for