Add Seagate 2TB External HDD to Oracle VM /OVS

Hello guys,
I have got a empty Seagate 2TB External HDD with NTFS partition And I want to add this as addition storage to my Oracle VM Server in OVS partition.
Also this 2TB USB HDD is solely dedicated to Oracle VM so I am not bothering about Any other operating systems.
To accomplish my this purpose I have gone through so many online forum to convert Seagate ntfs partition to Linux partition. But I couldn't find success.
So Here my questions are :
1) Is it possible to convert USB HDD ntfs partition to Oracle VM Server supported partition that can run VM Machine on it ?
2) If Answer is Yes, then Could you explain me how do I do that ?
Many Thanks
Hemesh

Hi Herbert,
Thanks for your reply,
So it means I have to create OCFS2 file system on external Hard drive.
Thanks
Hemesh.

Similar Messages

I upgraded my imac to OS Mountain Lion and now the Seagate Goflex external HDD is not recognised

I upgraded the iMac to Mountain Lion and it does not recognize the Seagate Goflex External HDD that I was working from earlier. I do not want to buy a special program since the Goflex HDD was working on both mac and Windows without any problems before the upgrade. The Goflex HDD is still working on my Macbook pro so there is no problem in the HDD. Is there something that needs to be activated... Please help

A bit more info for those of you reading this.... the problem seemed to be in iTunes. For each connected device , if I clicked on the Photo option I could no longer select the second radio button for limiting the photos by Events, Albums, etc. It was an all or nothing deal. But selecting all would cause the error.
So I had read the other forum posts about the "&" symbol being the cause of the problem. I went through iPhoto and made all of the changes. It did not work. I then looked at iTunes, using the AlbumData2.xml file listed in the other forums as a reference. I found one album with the "&". I edited that one. Still would not work. So then I spent 3 hours on the phone with AppleCare last week. I talked with 4 different advisors. None of them had heard about the "&" error from the forums. We tried everything in iPhoto including repair and rebuild. Finally we created a whole new library and reimported my master photos from my original one. Using this option would allow me to now check off that radio button in iTunes. BUT... I now lost all of my albums and events and would need to rebuid them. I was not happy. They agreed and we set up time to talk this week.
So today I talked with AppleCare again. They now have more info and said the problem has to do with iTunes and the new iPhoto 9.4. It does not like the "&" symbol anywhere in either iPhoto or iTunes. So they now have me going through everything in my iTunes library. Genre is OK but any other item cannot have " & ". I have several dozen to edit and will do it over the weekend and then restore my original iPhoto Library and see if I can finally get it all to sync. I will let you know how I make out, but apparently you need to eliminate " & " from every entry in iTunes and iPhoto.
Quality control is not up to par with Apple these days.

I have a Seagate 2TB external hard drive partitioned with one partition of Snow Leopard (my computer is running Lion). Can't seem to reboot using the option key. Any ideas as to what's wrong?

I have a Seagate 2TB external hard drive with 3 partitions, one for Snow Leopard - my computer has Lion. I cannot seem to boot from this hard drive but I could yesterday. Any ideas?

Didnt help. The night I asked this question I was able to reboot from the external hard drive after running Disk repair (which said everything was fine). Tonight I have tried again and cannot boot from the external. So I tried the Safe Mode restart and then chose restart with the option key held down as well as shutting down and trying holding down the option key while turning on the power. I have never been able to reboot just choosing restart and holding down the option key. Whenever the reboot from the external has worked I've had to shut down and hold the option key while turning the power on. Now that is not working. My computer is brand new as is the hard drive. I don't know where to go from here.
I can access the drive just fine while I'm in Lion. I just can't boot up using it. Help!

HP HD3200 2tb external hdd reformatting itself

I bought the HP HD3200 2tb external hdd just about a year ago and it has worked famously until very recently. Starting about a week ago the drive would randomly stop being read by my computer and after going into disk management the space on the drive has somehow transformed into unallocated. The only option I have at that point is to reformat the drive and start over. On top of that if I reformat the drive I then have to run a test disk to adjust the aprtition table otherwise it becomes formatted but simply does not show up in the browser. This has happened 3 times now and I would like to find a permanent solution before I lose something I can't replace. Any thoughts on why this has started to happen or how i might fix it would be greatly appreciated.

Take the drive to a Windows PC and install Data Rescue ($100) and let it work on reading the 1's and 0's of the files themselves, outputing the recovered files to another large external hard drive (formatted exFaT on the PC, not on the Mac and not NTFS!)
This is going to take hours to complete, so buy the software upfront and get it over with.
Once it's finished you can hook up the drive to the Mac and it will read it, no NTFS reading/writing software required.
If the PC your using is a Windows XP machine and there is no exFAT, then install the free exFAT for XP from Microsoft first.
Take a second to learn about drives and formatting, it's not wise to use NTFS software as you see now the problem.
Drives, partitions, formatting w/Mac's + PC's

Problem with using Seagate 1tb external hdd with my macbook!

Hi... I just bought online Seagate 1tb external HDD without knowing that it's not MacOSx compatible...
I heard that I can format it to fat32 to make it mac compatible...
Would it work? Or what else can I do except returning it back?
Thank you in advance for any help...

Hi laundry beach... Thanks...
here is the seagate's page about the 1tb EHD:
http://www.seagate.com/www/en-us/products/external/freeagent/freeagent_go/#tTabC ontentSpecifications
And this is the link by seagate for how to format the drive for mac:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=how-to-reformat-your-dri ve-dn&vgnextoid=da3bd85104b51210VgnVCM1000001a48090aRCRD
it says PC compatible but not mac compatible... that's why I think that it's not mac compatible...
So does that make sense to use it by formating it to some mac compatible state?
Or would it work without seams?

IMac keep ejecting my 2TB external HDD but in safe boot mode it is totally fine. How to resolve the problem?

Hi,
I have WD 2 TB external HDD. It has two partitions, one I use for my time machiine backup and one for my personal files and documents. Recently the iMac keeps ejecting the external HDD as soon as it gets connected to the iMac. I tried to reboot the computer in safe boot mode (by holding down the shift key at startup) and found out that problem is not there anymore. I can access my external HDD there and it never ejects the HDD.
It seems like the HDD is fine, the problem is with the iMac. Can anybody please give any solution to this problem?
Thanks!

Thanks Allan for your reply!
It makes sence that there must be some log in /start up item which is causing this problem. I went System Preference>Users & Groups> Login items> disabled all the items there to make sure, and restarted the computer but the problem is still there
Is there any other way to stop/configure the log in items?
Thanks again!

Malware Detected: Canvio Connect 2TB External HDD

I purchased a Canvio Connect 2TB external hard drive yesterday (20 July, 2014). Upon connecting to my Mac the antivirus software ClamXav alerted me that there was malware in the file "autorun.new" in the NTI folder of the external hard drive. The malware is called "INF.Autorun-32". I further tested the "autorun.new" file using VirusTotal, resulting in the file being flagged by the ClamAV (definition: INF.Autorun-32) and McAfee (definition: Generic!atr.b) engines.
Does anyone know if this is a false positive, or malware loaded onto the drive by some unscrupulous vendor?

For fastest, most efficient answers to questions such as this visit the ClamXav Forum.
greyag wrote:
I got a warning from ClamXav that a malware called "INF.autorun-32" was detected in the setup.exe in a folder called "NTI" -- I believe the .exe to be the installer of some backup software.
A quick answer is that the "autorun.new" file will automatically run something (probably setup.exe) when you plug that drive into a Windows machine. It won't run at all under OS X.
The definition has been in the database since early 2009.
The Microsoft malware encyclopedia says this about such malware:
VirTool:INF/Autorun
Description: This is a detection for a file, called autorun.inf, that can be used by worms when they spread to local, network, or removable drives. The file has instructions to launch the malware automatically when the removable drive is...
Published Date: Oct 10, 2013
Alert level: Severe
Checking VirusTotal I could only find one submitted file (from Toshiba) as being infected with this and ClamXav was the only scanner to detect it.
is it worth trying to use the hard drive? Should I reformat the drive and would that be sufficient to wipe off any possible malware?
Bottom line is that even if an actual infection, it cannot harm your Mac in any way.
Erasing the drive will permanently eliminate it and you should alway reformat any disk you receive purchase for use with your Mac as they are almost all formatted for Windows and this obviously is.
Partition the drive using Disk Utility with one or more partitions with a GUID Partition Table using the "Options..." button and a Format of Mac OS Extended (Journaled).

How Best to Partition a 2Tb External HDD

I've built a 2Tb external hard drive that supports both Firewire and USB. I want to be able to use it with my MacBook, as well as a Windows 7 Desktop. Would it be best to split to drive into two equal partitions and format each partition to the respective OS file systems? The Disk Utility in 10.4 seems to prevent me from doing this. I am expecting all the parts and SW soon to upgrade this machine to 10.6. Is the DIsk Utility in Snow Leopard different than the one in Tiger? Thanks for any help you might offer.

Tiger on Intel Macs will support such a configuration. See the following:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After the formatting has completed re-select the main drive entry in the left sidebar and click on the Partition tab in DU's main window. Use the Partition Scheme dropdown menu to create two partitions. Resize the partitions to your liking. The second partition should be the one you will use with Windows. Select that partition and set the Format Type to MSDOS then click on the Erase button.
You should now have two volumes. The first is for use on the Mac. The second is for Windows. When you boot into Windows you may want to reformat the Windows volume to use NTFS instead of FAT32. Note that NTFS is a read-only filesystem in OS X.

WD 1TB not recognised on 13" macbook pro retina (late 2013) even though it is exFAT file structure. The same drive is recognised on iMac and an old Dell laptop. I also have a seagate 2TB external hard drive (powered) that is recognised by my macbook pro.

I just bought a late 2013 macbook pro retina 13" a few days ago. I am trying to transfer all my music from my old Dell laptop. I formatted by 1TB Western Digital MyPassport to exFAT to allow read and write on both operating systems. The 1TB WD My Passport is recognised by both my Dell and iMac but not my new macbook pro retina 13 (late 2013). My 1TB WD My Passport is USB 3.0 with USB 2.0 backward compatability. I also just bought a 2TB Seagate Desktop Backup Plus (which is powered) for backing up and extra file storage, THIS WORKS! I don't understand how this works on my macbook pro but my 1TB western digital my passport doesn't. PLEASE HELP!! I have done full formats as well (not quick ones) which take nearly 8 hours. PLEASE HELP

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

I'm having problems with thunderbolt adaptor for seagate 3tb external hdd. faults include drive disconnecting on its own etc

im having problems with a new thunderbolt adaptor bought for seagate ext drive 3tb.
It came with some software which i installed but the drive disconnects on its own etc.

There is a whole lot of bad going on there.
There are problems both drive errors and USB errors. I don't believe it.
I have a hunch the drive is starving for power.
USB devices are supposed to function all the way down to 4.25V. Not all do.
USB ports are supposed to be able to deliver 4.25V at the end of the cable at 500mA. Not all do.
USB 2.0 devices are not supposed to draw more than 100mA unless they negotiate for more. Some violate that.
USB 2.0 devices are never supposed to draw more than 500mA. Some violate that. Especially disk drives.
My guess is that your drive is drawing excess current and the voltage drop through the port and cable are dropping you below 4.25; or at least below the voltage that your drive goes "Tango Uniform"[1]. Does your drive have the option for external power? If so try it. Following up on wtx's comment; USB 3.0 is capable of delivering more power. Also, some drives have used a cable that violates just about every aspect of the USB specification: A "Y" cable that plugs into two host ports to provide more power to the guest. I despise this solution with every fiber of my electrical engineering existence; never-the-less, you might try one.
edit: [1] Teats Up.
Last edited by ewaller (2015-04-04 17:02:04)

Problems formatting new seagate 1tb external hdd

hi,
new here as... well... I've not had problems with my mac prior to this.
I did have a buffalo 1tb drive, but earlier in the week I got a warning that this was unstable and I should copy data from it. saved my itunes library, and attempted to re-format the drive, but disk utility was unable to do so. I was getting errors stating it was unable to verify the drive, or re-format it.
I've just got a new seagate 1tb drive and I'm having similar/identical problems: I can't verify the drive and I'm unable to format it either.
I have been able to format the drive as an ms-dos (fat) drive, but if memory serves itunes/mac ran into problems when there was more than 200gb on the disc (and my itunes library's already past that!)
any and all help gratefully received.
cheers!
Leo.

Try erasing the drive and reformatting it as Mac OS Extended (Journaled) using disk Utility from your install disk. First mount the drive on your desktop then
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. select the drive you want to format, and see if that works.

Canvio Connect 2TB External HDD Disconnect

I have a new Canvio Connect. I have been trying to move a large amount of data to it. When I have it hooked up to my laptop PC running Windows 7 and USB 3, after copying for a while, it disconnects and opens the autorun window. I try again, it disconnects again not immediately but an hour or two into the copying. When I moved it to my desktop PC running Windows Vista Ultimate and USB 2, I try copying the same data but it doesn't disconnect not once. Is this something wrong with the drive? A setting in Windows? An issue with USB 3?
Any help would be appreciated. I really want the speed of USB 3.

I have a new Canvio Connect. I have been trying to move a large amount of data to it. When I have it hooked up to my laptop PC running Windows 7 and USB 3, after copying for a while, it disconnects and opens the autorun window. I try again, it disconnects again not immediately but an hour or two into the copying. When I moved it to my desktop PC running Windows Vista Ultimate and USB 2, I try copying the same data but it doesn't disconnect not once. Is this something wrong with the drive? A setting in Windows? An issue with USB 3?
Any help would be appreciated. I really want the speed of USB 3.

Problems with seagate external hdd

I have a Seagate 3TB external HDD attached to my iMac via a Firewire 800 cable. I have the latest software running (Yosemite 10.10.3) but the Mac no longer shows the HDD in finder, I can see it in disk utility but when i come to verify or repair the disk i get this message
" Error: Partition map check failed because no slices were found" I also get this message:
Verifying volume “Seagate External Drive”Verifying file system.Checking Journaled HFS Plus volume.Invalid B-tree node sizeThe volume Seagate External Drive could not be verified completely.File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
The drive is nearly full and I really don't want to lose any files, can anyone help please..

Hi Brian
Connect the External HD directly up to one of the iMac's and follow the Formatting and Partitioning instructions in Ken's article: (but note that doing so will erase the data on the drive)
Ken Stone's article: http://www.kenstone.net/fcphomepage/partitioningtiger.html
It's sounding more like your trouble is with network sharing than format, if so have a look
at: http://support.apple.com/kb/HT1549
and: http://db.tidbits.com/article/9261
Dennis

WD External HDD My Book Studio 2TB doesn't mount

Hello there
I was using the My Book Studio 2TB External HDD. It works fine until now. The External Drive just keep blinking light but not mounting on the os. I just wonder what is going on with my drive? Is there any method i can retrieve my data?
thanks very much

I have WD My Book Studio Edition II. The only way I can format it is via WD software (WD Drive Manager), since my model is the 2TB RAID. That's maybe one of the way you can do it.
On other note, I did experienced some issue with my new Hitachi XL2000 2TB HD. It won't format with disk utility under Mac OS Extended Journal. The only format I can use via disk utility is FAT-32 and some other windows format. But I managed to solve it by going to the partition tab and select option. From there I select GUID option.
Hope this will help to solve your problem
Message was edited by: Suzaidee

IMac with external HDD backup to Time Machine

I have an iMac with a 1TB internal HDD and have run out of space due to the number of photos in my library. I want to move the photos to a 1TB external HDD, then add a new 2TB external HDD to serve as the new Time Machine backup drive. So my setup will include the iMac and two connected external HDDs. What is the best way to set this up so the new Time Machine backup drive captures both the internal iMac HDD and the external photos HDD? Any tips or tricks would be appreciated. Thanks!

First of all, note that Time Machine can only make backups of drives formatted in HFS+ (known as "Mac OS Extended (Journaled)"), so your 1 TB external drive has to use that format before moving your photos to it. As you are using it to make Time Machine backups, it is already using that format.
There are two possibilities in order to start using a different external drive for Time Machine:
Move your old Time Machine backups made in your 1 TB external drive to your 2 TB external drive.
Start a completely new backup, deleting the old ones.
In the first possibility, you only have to follow these steps -> Time Machine: How to transfer backups from a current backup drive to a new backup drive - Soporte técnico de Apple After moving your Time Machine backups to the 2 TB external drive, remember to format the 1 TB drive with Disk Utility in order to store your photos there.
In the second possibility, just go to System Preferences -> Time Machine, and choose your 2 TB external drive as your Time Machine drive. Then, format the 1 TB external drive.
In both cases, Time Machine does not make backups of external drives by default, so after moving your photos to the 1 TB external drive, you have to go to System Preferences -> Time Machine -> Options, and remove the 1 TB external drive from the excluded items list. By doing that, the next backup will also include your 1 TB drive.

Add Seagate 2TB External HDD to Oracle VM /OVS

Similar Messages

Maybe you are looking for