Add search help to IT0006-PSTLZ field

Hi gurus,
what is the procedure of creating a search help for a standard field IT0006-PSTLZ?
Where should I do code implementation?
Possible search help selections should display Z table entries of local postal codes.
Selection of search help entry for PSTLZ should automatically fill P0006-ORT01 that is part of search help (Z table).
Please help.
cheers, Tom

I've already created Z table and search help, but have no ideas on how to linki it with IT0006.
Is there any way to avoid changing standard?
I'm new to enhancements and BAdi, so i'm not sure how to proceed on this one...
Where should this functionality be implemented?
Of course the change to the infotype should only be done in our country specific screen.
Since SAP does not provide this customer requirement by standard, we have to manually speed
up customer data entry and avoid input errors.
thnx, Tom

Similar Messages

IW31- How to add Search help for User specific fields in IW31 transaction.

Hi Experts,
I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
Is there any user exit for this requirement.
Please reply, it will be very helpful for me.
Regards,
B. V. Rao

Bala,
See the following user-exits:
IWO10015: F4 Help for user fields on operation
IWO10016: Customer enhancement to check operation user fields
PeteA
[www.pjas.com]

To add F4 help for goods recipient field in MIGO

Hello,
I've a requirement in migo, under the details data, we have a "where" tab.
Under this tab, there is a field "Goods Recipient" for input.
Now I've to add a F4 search help for this input field such that it picks up from my ZTABLE.
Can anyone please suggest how to add the search help for this field.
Can this be performed using a field exit or any userexit. MBCF0005 or badi MB_MIGO_BADI ?
Please guide me and thanks in advance.
~With Regards,
Him

Thanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him

How to add search help to a field in MARA table

Hi,
According to my requirement,I need to add search help to one of the field in MARA.It is checkbox now and it has to be changed to drop down.
How to do this please help.

hi u can use HELP-REQUEST option at selection screen or VALUE-REQUEST
The addition on Value-REQUEST displays the pushbuttuon for F4 help for the corresponding field.
The value selection is controlled by interactive events.
pradeep

How to add a search help on a screen field from screen painter

Hi,
I would like to add an existing Search Help on a screen field in Screen painter.
Of course it's possible to just click on th screen field and in the property box, I just have to set the name of teh search help.
The problem is that I need the screen field to be grey and user musn't be able to change the field value if he doens't use the search help.
I'm not allowed to modify the existing search help or to built it on my own from source code, I must use the existing one.
Do you have an idea on how to do so?
Regards,
Morgan

Dropdown Box:
In the screen painter for that field goto properties -> Dropdown ->select listbox.
Option 1:
Instead let that field be in change mode and if user enters any wrong entry which is not there in the table give a error messgae.
CHAIN.
    FIELD addr1_data-country.
    MODULE modify_screenfields1.
ENDCHAIN.
MODULE modify_screenfields1 INPUT.
CASE sy-ucomm.
    WHEN 'ENTER' OR 'EXECUTE'.
      IF NOT addr1_data-country IS INITIAL.
        SELECT SINGLE landx FROM t005t INTO lws_landx WHERE
                                      land1 = addr1_data-country
                                  AND spras = 'EN'.
        IF sy-subrc <> 0.
          MESSAGE e000(zo_spa) WITH text-022. " Invalid Country code
        ELSE.
          t005t-landx = lws_landx.
        ENDIF.
      ELSE.
        CLEAR: t005t-landx.
      ENDIF.
   ENDCASE.
ENDMODULE.                 " modify_screenfields1 INPUT
Option 2: Other than if u want the way u like, let that field be greyed out. don't attach the search help.
In the PROCESS ON VALUE-REQUEST.
FIELD addr1_data-region MODULE region_pov.
MODULE region_pov INPUT.
Using the F4IF_INT_TABLE_VALUE_REQUEST table value request show the search help.
also make that field input enabled.
ENDMODULE.                 " region_pov INPUT
I think this will solve ur problem.
Regards,
Prakash.
Message was edited by: Prakash Ramu

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Add search help to customer field in ESS Leave

Hi All ,
I was able to add some required field on the screen by the customer fields like Country.
But some fields need search help, can anyone advice how to add search help.
Is it possible to add field from webdynpro code also , so that I can give search help from there also , if not possible from backend.
Thanks and Regards,
Nuzhat

it needs to be done from backend
you can customise the field to appear from the backend in the portal, and then add a code like a normal field has to build
a help
check ptarQ>customising > additional fields

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Custom Search Help for Business Agreement field in transaction BP.

Dear Experts,
My requirement is to add Custom search help to Businees Agreement field (BUPA_CRMM31-BUAG_ID) in transaction code BP.
PLease guide me how to add Custom search help to Businees Agreement field which dont have search help option.
Regards,
Bala

Hello there,
I think the requirement/question is not very clear in your post.
However, the segment Java applet calls a CRM class which has related code and methods.
Class: CL_CRM_MKTTG_SEGAP_COM
Package: CRM_MKTTG_SEG_APPLET.
Please explain the problem in detail.
Regards,
Vinamra.

How can i add search help

hi how can i add search help .
when i am giving a parameter of type BSART it takes the in built search help
but i want only those values to appear in F4 help which have diff values in category but i want only with catogory "F".
thanks in advance
naval bhatt

Hi,
You have a Function module <b>HELP_VALUES_BSART</b>
or
You need to use AT SELECTION-SCREEN ON VALUE-REQUEST FOR <FIELD>.in this one use the Function module F4IF_INT_TABLE_VALUE_REQUEST.
Look at the below linkhttp://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
Regards
Sudheer

Adding search help to standard SAP field

Hi Experts,
I need to add search help to field ZUONR i.e assignment field in various tcode like fb70,fb60,f-02.etc which will select data from
Z tables . I have found out serach help exit F4IF_SHLP_EXIT_EXAMPLE but as per my knowledge that is to change existing standard search help.But to field ZUONR there is no search help attached.How can new Z search help be added to field ZUONR without use of access key.
Please suggest.
Regards,
Kaustubh Kabre.

Hi,
I don't know how to change "Value table" field on domain without access key, but if nothing else work, you can add new fixed values. From menu Goto->fixed value append.
Other possibility is to use GuiXT -> write script that will call your FM that will get data from your table and show them.
Best regards
Marcin Cholewczuk

Search help for Standard SAP field

Hi,
I need to add a search help to Group key (KONZS) field in XK01 transaction. How can i add our own search help to a field in standard transaction?? This is some what urgent, please give me the solution .
Thanks in Adavance,
Moghani.

You can APPEND your own search help to an SAP field that has search help defined. This is similar to APPENDing fields to an SAP table. But since field KONZS does NOT have any search help assigned, this option is not available to you.
You can also attach the search help to a field on a screen, i.e. limit the scope to that single screen, but this would still require a modification to the system, and hence, an access key. If you want to follow that route, the program name is SAPMF02K, screen 120, element list tab, references tab, search help column.
If you find another way to do this without an access key, please let us know.

Search help for selection screen field

Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vind

hi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
   select single butxt into butxt
         from t001
        where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
       exporting
            tabname           = 'T001'
            fieldname         = 'BUKRS'
            dynpprog          = sy-cprog
            dynpnr            = sy-dynnr
            dynprofield       = 'P_BUKRS'
       tables
            return_tab        = return
       exceptions
            field_not_found   = 1
            no_help_for_field = 2
            inconsistent_help = 3
            no_values_found   = 4
            others            = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
         from t001
        where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
       exporting
            dyname     = sy-cprog
            dynumb     = sy-dynnr
       tables
            dynpfields = dynfields
       exceptions
            others     = 8.
start-of-selection.
rgsds
anver
if hlped mark points

Add search help to IT0006-PSTLZ field

Similar Messages

Maybe you are looking for