Add slide numbers to the Adobe skin progress bar

Hi all.
How do I add slide numbers to my tutorials?
Thanks a million.
Tim.

Hi Tim,
Insert the following text into a text caption.
$$cpInfoCurrentSlide$$
Go to Caption Properties, Options tab and change 'Display for' to "rest of project"
Regards,
Ravi Kishore

Similar Messages

  • Is there a way to add line numbers in the margin?

    Is there a way to automatically add line numbers in the margin of a document?

    Hi Brian,
    If you go with Peter's suggestion, there are some details that since I've got a minute here, I'll mention...
    Set your Line Spacing for the document text to "Exactly" before you begin adjusting your table, otherwise you will have registration problems.
    Your Table will have to be a Floating object. Otherwise you won't be able to slide it into the margin. And, speaking of the margin, stay out of the gray area with the numbers if you want to print them. The gray border around your document is the area that the printer driver says is non-printable.
    In the Table Inspector, set Columns to 1 and Rows to 20 or whatever you prefer for your document. Set the number of Header Rows to 0.
    To apply the numbering, use the Fill feature: Type 1 in the first cell, type 2 in the second cell. Select both cells. Grab the Fill Handle in the lower right corner of the selection and drag it down to add a series of numbers to the rest of the column. (Easier than typing.)
    Decide how you want to justify the numbering. The Text Inspector has both vertical and horizontal justification controls for this. Just select the entire table and make the settings.
    Set the cell height to match the text line spacing. You can get close with the table row height, and maybe closer with a minor line spacing adjustment. Don't expect perfection, but you can get pretty close.
    You probably don't want the cell borders to show, so with the entire table selected, go to the Graphic Inspector and set Stroke to None.
    Lastly, cause the table to appear on every page by doing: Format > Advanced > Move Object to Section Master.
    Regards,
    Jerry

  • Can you add page numbers to the PDF version?

    Can you add page numbers to the PDF version?

    Hello saradianapasik,
    If you start with a document created with Acrobat Pro, or exported from your word processor as a .pdf, then you should include page numbers in that originating application. After you have exported a .pdf form from FormsCentral, it is no longer editable.
    I hope that helps,
    Brian

  • Adobe Reader - how to add page numbers with the free version?

    Hey guys,
    Imagine I've got a PDF file and I want to create a new one by selecting some pages out of it. I know this is simply possible by using the PDFcreator but I want to add page numbers. As far as I know this is not possible with the free version of Adobe unless I would add the page number on every single page by using a text box. I want to make different catalogs from the PDF so the page numbers are really necessary. Have you got any idea how to solve that issue? You know that's pretty much the only thing I need to add which means it's not worth buying the Pro version. Unfortunately I only got the PDF and I can't work on it e.g. with MS word before I export it. Do you know if there is a way to add page numbers with a free version? There might be an additional free software which allows that?
    Thanks for your support! 

    Thanks for your quick replies.
    I know how to add text page by page. But obviously it's hard to place the numbers on the very same position, is it?

  • When I add my composition to the Adobe Media Encoder from After Effects, it renders out incorrectly?

    Why is it that when I add my composition directly from after effects to the adobe media encoder, it renders out of the adobe media encoder incorrectly? By that I mean the video comes out a little scrambled- parts of it overlap other parts. Is this an issue with 'dynamic link'? Did I do something wrong? I'm working in CC.

    I also don't understand what you are saying. What do you mean by "parts of it overlap other parts"? A screen shot might help.
    What were your render settings in AME? (Format, Codec, data rate, etc.)
    What is in your AE comp? If footage, tell us what format, codec, etc. Tell us what effects were used too.
    What exact version number of AE CC are you using?

  • For Keynote: How do I start slide numbers on the third slide?

    I want the page numbers to start on the third slide, not the first. Is this possible?

    click delete. it doesn't affect the other slides' numbers.
    This doesn't achieve the original request, "page numbers to start on the third slide"
    what you suggest just deletes numbers 1 & 2.

  • Add change Icon in the Table Control tool bar.

    Hi Abapers,
    I need to add "change" icon in the table control. I added it but when I click on it is not working.
    My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" icon, all fields should be enabled for change.
    I have already referred to the standard progs BCALV_* but it does not have the "change" icon.
    plz give me any reference prg or sample code.
    Thanks
    Nani.

    Hi Nani,
    Track the function code of change icon in user command. if it is clicked then put a flag eq X.
    check that flag in PBO, if it is eq X then screen-input = 1 or vice versa.
    try this code:
    in PBO:
    LOOP AT SCREEN
    IF WS_EDIT = 'X'
    SCREEN-INPUT = 1
    ELSE
    SCREEN-INPUT = 0
    ENDIF
    MODIFY SCREEN
    ENDLOOP
    Hope it will work fine
    Regards
    Krishnendu

  • How do I get the Adobe PDF navigation bar to automatically appear at the top of my screen again instead of when I move my mouse?

    Before I upgraded my computer to Windows 7 and updated Firefox to the latest version, when I opened a PDF document online, the PDF navigation/menu bar would automatically appear at the top of the screen. Now it only appears at the bottom in a blue bar when I move my mouse around.

    cor-el, thanks for the tip. While I certainly scoured Adobe's preference settings to look for something relating to that exact thing, I never went to their help site until I got your post. I found out that the floating toolbar appears because the PDF opens in'' Read Mode'', which you can turn off for all future documents by doing this:
    * Quit your internet browser
    * Launch Acrobat (or Reader)
    * Choose Edit>Preferences
    * Click on the Internet category on the left
    * Deselect “Display in Read Mode by default”
    * Click the OK button.
    * Relaunch Acrobat
    Something important to note, if you have both Adobe Acrobat and Adobe Reader, you need to do the above in both programs (same steps).

  • How do I shut off the new colored progress bar under the address bar?

    In Firefox 7, there is now a small colored "progress bar" under the address url that loads with colored segmentation as a web page loads. While some might consider it helpful, I consider it both distracting and obnoxious. Can someone tell me how to disable this "feature" in about:config? I want to keep the colored granularixation of address sections, but there is no need for that to load as a colored every time a page loads. If I wanted rainbows in my browser, I'd create a Lucky Charms theme. I don't need this, thanks.

    I wish this was the case. This is a default action of Firefox 7, not a plugin. While I do want to replace the status bar one day, I have not used StatusBar4Ever to replace the late, lamented status bar as of yet. Unfortunately, this action is tied directly to the new colored segmentated address bar code. In version 5 and 6, he code was "unfinished" (or not fully implemented; take your pick), and as a result this thing never appeared. But in 7, the Firefox term prodly declaimed the feature "functional" and lo and behold, this problem arises! I do appreciate the suggestion, however.

  • TS1884 What if the Safe Boot progress bar stops (around the 25%-30% mark)? Any other alternatives I have to get my MAcBook Pro to boot without running into an error?

    Hi,
    after starting my MacBook Pro I was faced with a grey screen stating that "an error has occurred, you need to restart your computer". I did that multiple times but the same message appeared each time. So I started the Safe Boot. Now the progress bar is stuck at the 25-30% progress mark since 30 min. Any advise on what to do from here?
    Any help and advise is much appreciated!

    I doubt that shutting it off will do any harm but don't do it too often.
    Here is the best advice I can find for you:
    http://reviews.cnet.com/8301-13727_7-57573680-263/what-to-do-when-a-mac-wont-boo t-to-safe-mode/

  • [ReachIt] The sharing files progress bar don't have any changes when share file to another machine

    Install ReachIt 2.0.5.2, go to video folder to select a file, select shareit to send the video file to another machine, the progress bar don't have any changes after the file have been sent successfully.

  • How to add a number at the end of a bar chart?

    Hello everyone,
    I am building a series of graphs and bar charts for my thesis.
    I am struggling top fin an option that would allow me to but a "n=number" kind of entry at the end of the chart.
    I did manage to put the percentages in front of every bar, but what I wanted to do is something like this:
    Is this even feasible?
    Thank you everyone for the help!
    Cheers,
    Tiago

    Hello Jerrold
    Thank you very much for the help mate!
    It might take a little longer to edit all the graphs, but it's a start
    Thanks once again!
    Tiago

  • How to add page numbers to a PDF in Adobe but maintain the ability to convert to a PDF/A

    I have an PDF in adobe that I am able to convert into an adobe PDF/A document. However, when I use the header/footer option to add page numbers to the document it is no longer able to convert to a PDF/A document. How can I add page numbers and still be able to convert the document to a PDF/A?

    The report says:
    Fixups
    Convert to PDF/A-1a (1 object)
    Make document XMP Metadata compliant with PDF/A-1 (77 objects)
    Flatten transparency (high resolution) (1 object)
    Discard hidden layer content and flatten visible layers (1 object)
    Remove document structure compression (1 object)
    Remove document structure compression (1 object)
    Recompress LZW as ZIP (1 object)
    Convert color to sRGB (486124 objects)
    Results (Summary)
    Error
    Layers used
    Marked entry in MarkInfo not set to true
    TrueType font has differences to standard encodings but is not a symbolic font (313 matches on 313 pages)
    When you look at the specific comments on the pages the page numbers are highlighted and they specific comment is: (on per each page number. the page numbers start on page 27)
    TrueType font has differences to standard encodings but is not a symbolic font
    Page 27: Arial 12.0 pt TrueType embedded RGB (ICC) (0.0/0.0/0.0)  overprint: off
    Some PDF-based ISO standards require that a TrueType font must not define any differences from standard encodings (e.g. MacRoman or WinAnsii) if it is not a symbolic font.

  • Adobe Acrobat XI add line numbering on left hand side

    In Adobe Acrobat XI were is the option to add line numbering on the left hand side of the page for documents?

    If it is a Word document that you used to create the PDF, Then Word has the ability to show line numbers.
    Two methods:
    Layout Tab on Ribbon click in Line Numbers.
    From Main Menu choose format Menu > Document > Layout. Click Linember button and set up as desired.
    Then create your PDF.
    Note this is shown using a Mac. But the same thing is in The PC version as well.

  • Aggregator Slide Numbering (Captivate CPT 5.5)

    Aggregator seems to work fine. Two things I noticed, one of which is a question:
    The CPT movie fills the (webpage) screen at first but when all the individual SWF of the aggregated project finish downloading the CPT movie "shrinks" to the development size (in this case 800x600). I wonder why it is large at first (almost like "full screen" but more like full webpage) and then reverts to the development size.
    The slide number variable on each slide of each module (movie or SWF) only counts the slides in the specific module. When the next module starts, the slide number is zero. It makes sense that it would do this but I wonder if it is possible to do two different things instead:
    Index from one (1) instead of zero (0), and
    Count all slides, across modules, in successive order so if module 1 is 10 slides and module 2 is 5 slides, the last slide played would be slide number 15.
    Thanks in advance.
    Michael
    Adobe® Captivate® Version 5.5.0.257
    Adobe eLearning Suite 2.5
    Windows 7 Professional (x64) SP 1 (build 7601)
    2.67 GHz Intel Core i5 M 560
    3952 Megabytes Usable Installed Memory
    ATI FirePro M5800
    161.56 GB Hard Drive Free Space
    Microsoft Office 2010 Version 14.0.6026.1000
    Adobe Acrobat Version 10.1.0.534
    Adobe Bridge CS5.1 CS5.1

    Hello Michael,
    Cannot give you an answer on your first question.
    About your second question: are you showing the slide numbers to the user in a Text Caption? In that case the quickest way would be to calculate the number by an advanced action. It is possible to pass data from one file to another (like the total number of slides in the previous file), but then you'll need a widget from cpguru - Michael Lund:
    Save and Load Data Widget
    Lilybiri

Maybe you are looking for