Add SOA Composite Editor to jDeveloper on Linux

Hi guys,
I downloaded jDeveloper, once the Oracle JDeveloper 11g (11.1.2.0.0) (Build 6017)Installations and once the Generic Release Java Edition: 11.1.2.0.0 and wanted to add the SOA Composite Editor to it.
Usually it should be possible to add it via the Help/Check for Updates Interface, shouldn't it?
I made two screenshot so that you can see that the SOA extension does not show up.
http://imageupload.org/?d=821720741
http://imageupload.org/?d=7B1AAED61
Any ideas?

Usually it should be possible to add it via the Help/Check for Updates Interface, shouldn't it?Not on release 11.1.2
As per the release notes, it's not available for this release - use 11.1.1.5 if you need SOA

Similar Messages

Can't update JDeveloper 11.1.1.6.0 with the SOA Composite Editor

Greetings,
I've installed the Jdeveloper 11.1.1.6.0 and want now to update it with the SOA Composite Editor. After having gone to Help->Check for updates, selected "Search update centers" and checked "Oracle Fusion Middleware Products" and "Official Oracle Extensions and Updates", I don't have in the proposed list of products anything concerning the SOA Composite Editor.
My topology is such that I have installed Oracle Fusion Middleware on a server and, given that three WebLogic servers are required for run it, the AdminServer, the soa_server1 and the bam_server1, I cannot run on the same machine JDeveloper, so I installed it on a different one. Does this have anythin,g to do with the fact that I can't update the JDeveloper installation with the SOA Composite Editor ?
Many thanks in advance,
Nicolas

Can you please go to Help --> About in your Jdeveloper install, and provide the full version number that is listed there.
That will help us understand why the SOA extension may not be visible to you.
Thanks,
--jb

Download link Oracle SOA Composite Editor doesn't work

The following link http://download.oracle.com/otn/java/jdeveloper/11.1.1.3.0/extensions/soa-jdev-extension.zip returns 404 page not found. The update center in Jdeveloper lists the Oracle SOA Composite Editor 11.1.1.3.0.25.27. The download however fails with 404 as well
Are there any alternative download locations?
With kind regards,
Jornica
Edited by: Jornica on Jun 9, 2010 9:25 AM

It seems something is wrong at the side of Oracle. Yesterday i already had a lot of redirects from urls, so couldn't access resources.
But i can't find some other location to download the extension
it's working again :)

SOA Composite Editor Missing in 11.1.2 Or Not Yet Released?

Hi,
I downloaded the JDeveloper Studio 11.1.2 and there is no SOA composite editor (I saw the note in the page after the setup). The SOA is not included or not included yet?
If it is not included some people know why?
Thanks
Fabio D'Alfonso

http://www.oracle.com/technetwork/developer-tools/jdev/shermanrelnotes-405777.html
1) There is no design-time or runtime support for SOA, BPM, and WebCenter components in 11g Release 2.

Access EBS WebServices by SOA Composite Editor

Hey all,
I want to access EBS Adapter WebServices using another APPS database user [eg: APPSSOA].
I have granted db objects from APPS schema to APPSSOA user, but when I used APPSSOA to browse from Application Module Browser, there are empty with no one object that can be used.
What the other step must I do?
Regards
Tejono

it is jdeveloper Studio Edition Version 11.1.1.5.0, i guess if its not the correct version SOA editor would not appear in the update list when I do check for updates.
Do i need to do anything like install other software? I have been at it for days but I can seem to make any progress.

Jdevelopper and editing EJB in soa composites

Hello,
I'm using Jdevelopper (with the bellow configuration) in order to edit SOA composite but it is introducting a bug into the "composite.xml" file when I edit an "EJB exposed service"
Previously the working service tags were :
<service name="MyService" ui:wsdlLocation="MyRef.wsdl">
<interface.wsdl interface="/my/package/service/#wsdl.interface(My)"/>
<binding.ejb jarLocation="myjar.jar" javaInterface="my.package.service.MyFacade" serviceId="MyService"/>
</service>
but once i edit it with the graphical interface it becomes and no more work once deployed
<service name="MyService" ui:wsdlLocation="MyRef.wsdl">
<interface.wsdl interface="/my/package/service/#wsdl.interface(My)"/>
<binding.ejb jarLocation="myjar.jar" ejb-version="EJB3" name="my.package.service.MyFacade"/>
</service>
As we can see, there is no more a *"serviceId"* tag in node *<binding.ejb>* and it has rename *"javaInterface"* attribute to *"name"*.
From my point of view, these are two bugs from JDevelopper as composite was working before and no more after modification.
Can anyone confirm the same behaviour and the same issues ?
Oracle JDeveloper 11g Release 1 11.1.1.5.0
Studio Edition Version 11.1.1.5.0
Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013
Copyright © 1997, 2011 Oracle and/or its affiliates. All rights reserved.
IDE Version: 11.1.1.5.37.60.13
Product ID: oracle.jdeveloper
Product Version: 11.1.1.5.37.60.13
Version
Component     Version
=========     =======
ADF Business Components     11.1.1.60.13
Java(TM) Platform     1.6.0_25
Oracle IDE     11.1.1.5.37.60.13
PMD     JDeveloper Extension 4.2.5.3.0
SOA Composite Editor     11.1.1.5.0.01.74
Versioning Support     11.1.1.5.37.60.13

Try posting on the SOA Suite forum.

Launching flow trace for SOA composite leads to login page

Hi,
I am using windows vista, oracleXEuniv, oracle fusion middleware 11g 11.1.1.3.0, SOA 11g PS2+PS3, jdev 11.1.1.3.0+SCA composite editor 11.1.1.3.0.25.57
Now after logging into enterprise manager fusion middleware control when I browse to my soa composite by clicking
SOA->soa-infra(soa_server1)->default->validationForCC[1.0]
This list me all the recent composite instances. Now if I click on any of the instance ids a new pop up window is open which displays enterprise manager login screen.
In addition if i click on 'Launch Message Flow Trace' on Test composite page then also it happens the same way.
Does anyone know what configuration I might be missing?
In logs i only get following
####<07/12/2010 12:27:14 PM EST> <Warning> <org.apache.myfaces.trinidad.bean.PropertyKey> <kapilPC> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <4a432b45d3fd32e0:-302436ff:12cbe3b48bc:-8000-000000000000016f> <1291685234358> <BEA-000000> <Unserializable value:oracle.sysman.core.view.tgtctls.common.DefaultTreeModel@148f6b5 for key:UINodePropertyKey[value,17]>
[2010-12-07T12:27:14.358+11:00] [AdminServer] [WARNING] [] [org.apache.myfaces.trinidad.bean.PropertyKey] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000ImyS3Tv2jKYFLryGOA1CzNyi00003x,0] [APP: em] [dcid: 4a432b45d3fd32e0:-302436ff:12cbe3b48bc:-8000-000000000000016f] Unserializable value:oracle.sysman.core.view.tgtctls.common.DefaultTreeModel@148f6b5 for key:UINodePropertyKey[value,17]
Kapil Sapra

Hi,
I followed the information given in the thread. I downloaded the version 11.1.1.0.0.52.19 and tried to install it. But JDeveloper gave an error saying
This update cannot be installed. It requires other extensions which are not installed, or which are installed but incompatible.
Extension...................Required Version.......................Installed Version
Oracle.studio..............min=11.1.1.1.33.54.07...............min=11.1.1.0.31.51.88
Oracle.j2ee................min=11.1.1.1.33.54.07...............min=11.1.1.0.31.51.88
I am giving the details of the JDeveloper version installed on my machine.
About
Oracle JDeveloper 11g 11.1.1.0.1
Studio Edition Version 11.1.1.0.1
Version
ADF Business Components........... 11.1.1.51.88
CVS Version.............................. Internal to Oracle JDeveloper 11g (client-only)
Java(TM) Platform...................... 1.6.0_05
Oracle IDE................................. 11.1.1.0.31.51.88
Versioning Support.....................11.1.1.0.31.51.88
Properties
All the properties are of version....11.1.1.0.31.51.88
There are only two version of downloads available. Can anyone help in getting the correct version of SOA composite editor which might had been archived?
Regards,
Pavan

Error while compiling SOA composite using Jdeveloper

Hi,
I am getting below given error while compiling the SOA composite using Jdeveloper..
I m referring this PDF to develop a custom workflow.
http://st-curriculum.oracle.com/obe/fmw/oim/oim_11g/developing_oim_custom_approval_process_for_self_registration/developing_oim_custom_approval_process_for_self_registration.pdf
Error(45,34): Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "ApprovalProcess" of composite "default/SelfRegistrationApproval!1.0"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
Can u please let me know what am I missing here.
Regards,
Ab

Hi,
If u have any custom jars..make sure to add them at SCA-INF/lib directory.
Thanks,

Error while deploying SOA composite via ant

I am getting following error while deploying SOA composite through ant from SOA server (UNIX).It is unable to get mds configuration.
Jdeveloper is not installed in SOA server.
I am trying to copy the SOA project from local machine to SOA server and trying to deploy from SOA server.
Error
Parse of component type files failed, check the adf-config.xml file : "oracle.fabric.common.FabricException: oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "mstore-usage_1" is invalid.
MDS-00503: The metadata path "/u01/orasoa/Oracle/Middleware/Oracle_SOA1/integration" does not contain any valid directories.
I checked /u01/orasoa/Oracle/Middleware/Oracle_SOA1 directory. Integretion directory is not available.
Am I missing anything?
*Please advise.*
build.propeties
============
# build file for HelloWorldComposite
composite.name=AntScriptDeployPOCService
# revision of the composite
composite.revision=1.0
# Set oracle.home to <JDEV_HOME>/jdeveloper, where <JDEV_HOME> is JDEV # installation directory
#oracle.home=C:/Oracle/Middleware/jdeveloper
oracle.home=/u01/orasoa/Oracle/Middleware/Oracle_SOA1
# soa-server side oracle home directory - needed for deployment plan
# and the weblogic sca library deployment
soa.server.oracle.home=/u01/orasoa/Oracle/Middleware/Oracle_SOA1
###### Deployment server connection information
# the admin server connection information
admin.server.host=10.40.237.106
admin.server.port=7001
# the domain where soa infra is installed
server.domain.name=soa_domain
# connection information for the managed server, used for soa-deployment
managed.server.host=10.40.237.106
managed.server.port=8001
# User and credentials for the servers
server.user=weblogic
server.password=<password>
# wls server where soa is targeted.
server.targets=soa_server1
#local.java.home=C:/Oracle/Middleware/jdk160_14_R27.6.5-32
local.java.home=/u01/orasoa/Oracle/Middleware/jdk160_14_R27.6.5-32
Build.xml
<?xml version="1.0" encoding="UTF-8" ?>
<project name="AntScriptDeployPOCService" default="all">

<property file="build.properties"/>
<property name="deploy.dir" value="../deploy"/>

<target name="compile-package">
<property name="sca-inf.classes.dir" value="../SCA-INF/classes"/>
<mkdir dir="${sca-inf.classes.dir}"/>
<ant antfile="${oracle.home}/bin/ant-sca-package.xml" target="package" inheritall="false">
<property name="oracle.home" value="${oracle.home}"/>
<property name="compositeDir" value="${basedir}/../"/>

<property name="scac.application.home" value="${basedir}/../.."/>

<property name="compositeName" value="${composite.name}"/>

<property name="revision" value="${composite.revision}"/>

<property name="java.passed.home" value="${local.java.home}"/>

</ant>
</target>
<target name="deploy">
<condition property="deploymentplan.name" value="null">
<not>
<isset property="${deploymentplan.name}"/>
</not>
</condition>
<echo>Deploying to http://${managed.server.host}:${managed.server.port}/soa-infra/deployer</echo>
<ant antfile="${oracle.home}/bin/ant-sca-deploy.xml" target="deploy" inheritall="false">

<property name="user" value="${server.user}"/>
<property name="password" value="${server.password}"/>

<property name="serverURL" value="http://${managed.server.host}:${managed.server.port}/soa-infra/deployer"/>

<property name="sarLocation" value="${deploy.dir}/sca_${composite.name}_rev${composite.revision}.jar"/>

<property name="overwrite" value="true"/>

<property name="configplan" value="${deploymentplan.name}"/>
</ant>
</target>
<target name="all" depends="compile-package,deploy"/>
</project>

Check whether the adf-config.xml file in your app is having proper mds path similar to this:
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config">
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mstore-usage_1" path="/soa/shared"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage id="mstore-usage_1">
<metadata-store class-name="oracle.mds.persistence.stores.file.FileMetadataStore">
<property value="${oracle.home}/integration"
name="metadata-path"/>
<property value="seed" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
"

Modifying custom developed SOA composite

Hi,
I have developed a custom SOA composite with 2 level of approvers and it is working fine with no issue. And now, I need to add one more level of approval to it.
I have added one extra level and deployed it again into SOA successfully.
Now, if try to test it now, I am getting unexpected errors in all the levels that worked fine before making the changes.
Do I need to do anything else other than re-deploying this composite to SOA? Please let me know.
Can you please provide me the steps to modify a existing custom SOA composite?

Hey,
1-Modifying the composite to consume events
1.1-add a new mediator component called ThiagoLeoncioPO
1.2-Defining the event
1.3-Open the POProcessing application in JDeveloper and open composite.xml,
1.3.1-click on the Event Definition Creation icon:
1.3.2-Click on OK to complete the event definition.
1.3.3-Close the POEvents.edl panel.
1.4-Save all.
Note: You just created a new event here. And it's available to subscribe or publish.
2.0-Subscribing to the NewPO event
2.1-Drag-and-drop a Mediator component onto the composite.
2.2-Name the mediator ThiagoLeoncioPO.
2.3-Select Subscribe to Events for the Template.
2.4-Click on the + to add an event.
2.4.1-Select the NewPO event from the Event
Chooser window.
2.4.2-Double-click on the ThiagoLeoncioPO mediator and define a new
transformation map.
2.4.2.1- In the transformation-map, map the all the fields from
the source to the target.
2.5- Close the mediator and save all.
Reference: http://docs.oracle.com/cd/E17904_01/doc.1111/e14309/workflow_service.htm (Section 21.2.1)
(very helpful link): http://docs.oracle.com/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#CHDBAJIB
For OIM also look at : ant -f registerworkflows-mp.xml enable : Section: 21.2.4 Enabling a SOA Composite with Oracle Identity Manager
I hope this helps,
Thiago Leoncio.

Cannot deploy SOA composite to a managed server

My problem: cannot deploy SOA composite to a managed server.
The following is what I did:
1. I created a domain "devDomain". admin server is created automatically for me.
*2. I created a manged server (soa_server1) on my domain after.*
2. started the admin server
3. started soa_server1
4. see both servers in WLS control, both server state=running
5. see both server in EM console, both server status are up
6. in JDev(11.1.1.5.0), created an application server connection, and tested the connection successfully
7. when I tried to deploy my composite from JDev, I selected the application server connection, on step "SOA servers", it only lists AdminServer.
8. Then I tried to deploy the composite from EM by right-click soa_server1, but "SOA deployment" is not in the list.
My guess: there should be some libraries or other resources applied to soa_server1 before it could accept soa deployment. What are these libraries/resources?
I tried to target all 10 libraries under the path "oracle.soa." to soa_server1, and checked the config.xml and found the file was updated correcly, reboot my pc, restarted the servers, but still face the same problem.
My environment is weblogic 10.3.5.
Basically, my question is:
after a domain is created and admin server is there, if I want to add a managed server which will host soa composites, what should I do to configure the managed server?
Edited by: wiky on Jul 20, 2011 11:39 AM

How can I add new code to a clustered environment without causing an          outage. Right
          > now I have to deploy the new code using the admin server to both managed
          servers.
          > My question is if I pull one managed server out of the cluster, add new
          code and
          > test it, how do I add this one managed server back to the cluster that is
          referencing
          > the old code without causing an outage for the site?
          This is something addressed much better in the 7.0 release.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          Clustering Weblogic? You're either using Coherence, or you should be!
          Download a Tangosol Coherence eval today at http://www.tangosol.com/
          "William" <[email protected]> wrote in message
          news:3cc9847a$[email protected]..
          >

Error While executing the SOA Composite application.

Hi Gurus,
I have recently installed the VM box "oel6-64bit-soasuite-11gr1-ps6-otn.ovi" for Learning the SOA and also gone through the SOA Oracle training so i have the lab exercise documents with me. So i was trying to follow the steps mentioned in the training document for chapter 5 (CCValidate) for credit card Validation in which SOA composite application uses the DB adapter to query the DA and return the Credit card status.
I'm using the JNDI as "eis/DB/SOADemo" and when i looked in the Admin Console i can see the DB adapter status is OK .
Domain Structure --> dev_soasuite --> Services --> Data Source --> I dont See the eis/DB/SOADemo listed.
also tried to add the eis/DB/SOADemo in data Source but thorws Java exception saying already exists.
Domain Structure --> Environment --> Servers --> View JNDI Tree --> I can see the above mentioend JNDI i.e. eis/DB/SOADemo.
Please let me know what is wrong and how i can get rid of it.
But when i deployed the SOA Composite application on Server and tested the same it is throwing exception as below
ava.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [CreditCardDBServiceSelect], Descriptor name: [CreditCardDBService.Creditcards]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "942" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:813) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:385) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:303) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:187) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1415) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:93) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:103) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:93) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:958) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:427) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [CreditCardDBServiceSelect], Descriptor name: [CreditCardDBService.Creditcards]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "942" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:362) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:1004) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:750) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:808) ... 77 more Caused by: oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreditCardDBServiceSelect' failed due to: DBReadInteractionSpec Execute Failed Exception. Query name: [CreditCardDBServiceSelect], Descriptor name: [CreditCardDBService.Creditcards]. Caused by java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist . See root exception for the specific exception. This exception is considered retriable, likely due to a communication failure. To classify it as non-retriable instead add property nonRetriableErrorCodes with value "942" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:1053) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:839) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:358) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:1004) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:750) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:807) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:385) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:302) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:187) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1415) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:103) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:957) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:427) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) ... 9 more
Thanks
-Viajy G

> Domain Structure --> dev_soasuite --> Services --> Data Source --> I dont See the eis/DB/SOADemo listed.
Do you see jdbc/SOADataSource? If you go to connection pool, what are the connection parameters: host, database, user, etc? I bet the user is not SOADEMO there...
> When i queried it from the database using the user SOADEMO it returns data
What other parameters are you using to query the database? host, database, etc... Are them the SAME you see on the connection pool above? I bet something is different...
Hope this helps...

Error during deploying SOA Composite

I have created a SOA Composite in which I am trying to access an External Web Service.
The compilation goes fine but its failing at the time of deployment to Soa Server.
My BPEL consists of following activities-> RecieveInput-> Assign -> Invoke -> Assign -> Callback client
In my composite I have configured WS policies and in BPEL’s invoke activity , I have added headers and endpoint URI as an expression in properties tab.
I am getting the following error at the time of deployment :-
1) Through Jdeveloper and Manually through Soa Server :-
Caused By: ORABPEL-05250
Error deploying BPEL suitcase.
error while attempting to deploy the BPEL component file : the exception reported is: java.lang.Exception: BPEL 1.1 compilation failed
This error contained an exception thrown by the underlying deployment module.
Verify the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:200)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:876)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:122)
at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
2) If I deploy manually through XML files, deployment happens successfully but while testing , I get the following error
Caused by: java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'www.w3.org', port: '80'
Kindly provide any suggestions to rectify the issue.
Thanks.

When starting SOA Suite after upgrading from 11.1.1.4 to 11.1.1.6, I experienced a similar error in the soa_server?.out logs:
<Error> <oracle.soa.bpel.engine.deployment> <BEA-000000> <
java.lang.Exception: BPEL 1.1 compilation failed
Anyone have a suggestion on how to resolve this error?

12c SOA composite deployment issue using maven

I am facing issue with 12c SOA composite deployment using maven. I execute the below command for deploying any composite. (Note: Update and run init.cmd file before running the below maven command)
mvn pre-integration-test –f soa-pom.xml –Dcomposite.name=TestSOAProj –Dcomposite.version=1.1
Issues:
As seen above, I specified composite version to be deployed as 1.1 in pom.xml file, but maven deploys the composite with version that is present in composite.xml. It does build the jar file with the version specified in the pom i.e. TestSOAProj_rev1.1.jar, but when it deploys I see the composite with version as 1.0 (this version is in composite.xml). The out of the box maven script is not overwriting the revision in the composite.xml with the value specified in the pom file.
Also, is there a way to pass the partition name as an user input parameter in the pom file. I tried this with the out of the box pom file by giving the partition name as something other than ‘default’, but the maven script ignores this and always deploys to ‘default’.
I am not sure if I am missing anything here. Please suggest.
inti.cmd:
SET JAVA_HOME=D:\12c-Installation-Path\Java\jdk1.7.0_60
SET ANT_HOME=D:\12c-Installation-Path\Oracle\Middleware\Oracle_Home\oracle_common\modules\org.apache.ant_1.9.2
SET M2_HOME=D:\12c-Installation-Path\Oracle\Middleware\Oracle_Home\oracle_common\modules\org.apache.maven_3.0.5
SET PATH=%PATH%;%JAVA_HOME%\bin;%M2_HOME%\bin;%ANT_HOME%\bin
soa-pom.xml:
<?xml version="1.0" encoding="UTF-8"?>
<project xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd" xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
         
    <modelVersion>4.0.0</modelVersion>
    <groupId>TestSOAApp</groupId>
    <artifactId>${composite.name}</artifactId>
<version>${composite.version}</version>
    <packaging>sar</packaging>
    
    
    <properties>

<code.basedir>${soa.app.source}/${project.artifactId}</code.basedir>
        <scac.input.dir>${code.basedir}/SOA</scac.input.dir>
        <scac.output.dir>${project.basedir}/target</scac.output.dir>
        <scac.input>${scac.input.dir}/composite.xml</scac.input>
        <scac.output>${scac.output.dir}/out.xml</scac.output>
        <scac.error>${scac.output.dir}/error.txt</scac.error>
        <scac.displayLevel>1</scac.displayLevel>

        <configplan>${code.basedir}/${project.artifactId}_cfgplan.xml</configplan>

<composite.name>${project.artifactId}</composite.name>
<composite.revision>${project.version}</composite.revision>
<composite.partition>default</composite.partition>
        <serverUrl>http://${target.hostname}:${target.port}</serverUrl>
        
<overwrite>true</overwrite>
        <forceDefault>true</forceDefault>
        <regenerateRulebase>false</regenerateRulebase>
        <keepInstancesOnRedeploy>false</keepInstancesOnRedeploy>
        
        <scatest.result>${scac.output.dir}/testResult</scatest.result>
        
        <input>${project.artifactId}</input>
        
    </properties>
<build>
       <plugins>
   <plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>properties-maven-plugin</artifactId>
<version>1.0-alpha-2</version>
<executions>
   <execution>
<phase>initialize</phase>
<goals>
   <goal>read-project-properties</goal>
</goals>
<configuration>
   <files>
<file>build-${env}.properties</file>
   </files>
</configuration>
   </execution>
</executions>
   </plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<version>1.6</version>
<executions>
<execution>
<id>read-input</id>
<phase>prepare-package</phase>
<inherited>false</inherited>
<goals>
<goal>run</goal>
</goals>
<configuration>
<target>
<property name="fmw.app.basedir" value="${soa.app.source}" />
<property name="fmw.composite.name" value="${project.artifactId}" />
<property name="configplan.target.path" value="${scac.output.dir}" />
<ant antfile="${project.basedir}/replace-tokens.xml" target="replaceConfig" />
</target>
</configuration>
</execution>
</executions>
</plugin>
            <plugin>
                <groupId>com.oracle.soa.plugin</groupId>
                <artifactId>oracle-soa-plugin</artifactId>
                <version>12.1.3-0-0</version>
                <configuration>
                    <compositeName>${project.artifactId}</compositeName>
                    <composite>${scac.input}</composite>
                    <sarLocation>${scac.output.dir}/sca_${project.artifactId}_rev${composite.revision}.jar</sarLocation>
                    <serverUrl>${serverUrl}</serverUrl>
<user>{}</user>
<password>{}</password>
                    
                    <compositeRevision>${composite.revision}</compositeRevision>
                    <revision>${composite.revision}</revision>
                    <scacInputDir>${scac.input.dir}</scacInputDir>
<input>${input}</input>

                </configuration>
                 
                <extensions>true</extensions>
            </plugin>
        </plugins>
    </build>
</project>
replace-tokens.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<project name="EA_SOA_Build" default="replaceConfig">
<target name="replaceConfig">
<echo>Replacing tokens in configuration file</echo>

<delete failonerror="true" file="${fmw.app.basedir}/${fmw.composite.name}/${fmw.composite.name}_cfgplan_generated.xml"/>
<copy overwrite="true" failonerror="true"
file ="${fmw.app.basedir}/${fmw.composite.name}/${fmw.composite.name}_cfgplan.xml"
tofile="${configplan.target.path}/${fmw.composite.name}_cfgplan_generated.xml"/>
<replace file="${configplan.target.path}/${fmw.composite.name}_cfgplan_generated.xml">
   
   <replacefilter token="dmnh1i.manheim.com" value="dmnh2i.manheim.com" />
</replace>
</target>
</project>
build-local.properties:
soa.app.source=D:/Oracle_SOA12c13/Jdev_mywork/OVCApp
mds.outer.dir=D:/Oracle_SOA12c13/Jdev_mywork/OVCApp/MDS
target.hostname=localhost
target.port=7001
oracle.home=D:/Oracle_SOA12c13/Middleware/Oracle_Home

hi,
Can i pass multiple composite name like
mvn pre-integration-test –f soa-pom.xml –Dcomposite.name=TestSOAProj –Dcomposite.name2="xxx"
can you please suggest me for same.
Hint- passing project1,project2.....

In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850

Our requirement is to build a SOA Composite to dump all the details in a EDI X12 850 ( Purchase order ) document in to a database table. In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850 element details to map them to a base base columns.

Drop the File Adapter to the left lane of the composite i.e., Services lane...
Go to Step 2, give a meaningful name....
Step 3, select "define from operation and schema"
Step 4, select the operation type as "read"
Step 5, select physical path and give the folder path in the "Directory for incoming files" field.,
Step 6, select wildcards and give the expression depending on the file name it would be at run time...
Step 7, select the polling frequency as required....
Step 8, in the URL field, adjacent to that , select "browse for schema file" and select the XSD which you have exported from B2B Editor.
say next and finish, you will be good to go.
Hope this helps,
Thanks,
N

Add SOA Composite Editor to jDeveloper on Linux

Similar Messages

Maybe you are looking for