Add Style in Section Marker

Hi all
I have a 4 page document, each page has different running head. So I placed Section Marker in master page. Now I am fine, in my 2nd page running head my Section Marker should be
MY TITLE AND YOUR TITLE.
the word AND should be ITALIC character style?
How can I apply this? any one had experience this before?
thanks in advance
regards
a r u l
http://www.vpublish.net

Section markers contain text only, no formatting. There's no way to do
what you want with the section marker.
You didn't mention version. ID CS3 and CS4 will let you use variables,
which *also* cannot contain formatting, but you might be able to use two
or three variables on the master page, like
{My Title variable} and {Your Title variable}
I've never tried it, but another option might be nested styles. Nested
styles would only work if there was a consistent pattern (i.e., after 3
words, or after one colon, or up to 3 spaces, etc.). Again, I've never
tried it, but I don't think you can include an end-of-nested-style
character in a section marker or variable (but let me know if I'm wrong).
Of course, for 4 pages, setting up section markers or variables is more
work than just typing the running head locally on each page. Are you
sure you didn't mean 40 or 400 page document?
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Similar Messages

  • Find/Change in Section Marker

    I would like to have a Find/Change Text or GREP option which also can Find/Change the text in the Section Marker. While working with books and magazines i use the Section Marker a lot (which you can find in the Numbering & Section Options panel). Already had the unpleasant encounter with unchanged text in the Section Marker a several times.
    I think this is a effective feature to add...
    If you know a solution, i am very interested!
    Best regards,
    dtpartner

    I used it to insert new running heads per chapter. Insert the Section Marker symbol into a large enough text frame onto a single master page. Then set every chapter to use a new section, and copy its title into the Section Marker field in the Page Numbering panel.
    Using variables is alike, but much easier, because you define the variable to pick up the latest text in a style named so-and-so, and then you don't have to worry anymore about did-I-add-a-section-already and what-if-I-insert-pages. It's all in the Help.
    [Added] And if the chapter title changes, the variable is updated automatically.

  • Footnote renumbering using Section marker in pages

    I want to add section marker after each and every chapter.
    There is one default section marker at the start of the page. After that i can able to add only one section and if i try to add another one it's throwing error.
    Please suggest.
    Regards,
    Suresh

    That is part of your 1st page margins, click in the text:
    Inspector > Layout > Layout > Layout Margins > reduce "Before"
    Peter

  • How do I use user_datastore with a feeder proc to add an mdata section?

    Hi,
    I have text data spread across a number of different tables. I have created a user_datastore with a feeder procedure that creates an xml document which is then indexed into a dummy column on the parent table. This works fine. However I need to add an mdata section to the index, via my xml document. I haven't seen any examples of this being done in conjunction with the ctxsys.auto_section_group option of the create index statement, and am wondering if it is possible?
    Could somebody furnish me an example of how I achieve this.
    Oracle 11.2.
    Thanks
    Ralph

    You can't use MDATA with AUTO_SECTION_GROUP. AUTO means it automatically assigns zone sections for every tag it finds - if you want anything other than zone sections you must use BASIC_SECTION_GROUP, XML_SECTION_GROUP or HTML_SECTION_GROUP and manually define your sections.

  • Best way to add a new section in the middle of a tune?

    hi,
    what's best way to add a new section in the middle of a tune? I think I came up with an interesting transition to a tune... what's the best way to try it out?
    please be specific. if it's just select all and cut and move - I already know that one. somehow, I bet there's a better way.
    thanks in advance...

    You should be able to enter the "in" and out" points in the transport bar. And then under the Region menu, choose "Cut/Insert time."
    So if, for instance, you go up to bar 32, and want to add 8 bars, enter 32 1 1 1 in the top transport place, and 40 1 1 1 in the second. Then select "Cut/Insert Time", and an 8 bar whole will be added to your song.
    Be aware that if there are overlapping MIDI notes found at that cut point, Logic will warn you about it, and give you some options. In this case, I think "Keep" would be what you'd want, but every situation is different...
    Hope that helps....

  • List teamplate (template created on migrated custom list from SP 2010 to 2013) not appearing in Add an app section in SP 2013

    We have migrated from SP 2010 to SP 2013. When we are trying to create list template from the migrated OOB custom list. List template successfully created but it is not appearing in Add an app section in SP 2013.

    Please make sure you have activated "Team Collaboration Lists" feature under Site Features. Also check if the template in the list template gallery is published.

  • I can't find 'Add all tracks' in the add to playlist section in iOS 7

    what happend 2 adds l tracks' in the add to playlist section in iOS 7

    yes I agree, I was disappointed when this feautre was missing in iOS 7. But iOS 7.1 has place the "Add All Songs" option to creating playlists

  • Layout Margins | Second page of section marked 'first page is different'

    I have some custom formatting for the first page of a section, marked in Inspector with 'First page is different': with a 3cm upper margin to set text to start below a banner image embedded in the section master.
    However the second page of that section is not settable with a separate layout margin, and since the the banner on the second page is different, I need it to be.
    Any ideas?

    j,
    You would have to put the Page Break and Section Break into your Template, so you would begin with two pages and two layouts already there.
    You are getting into Page Layout territory here. At some point it's just easier to pre-define the whole document in a Page Layout format. It all depends on where you are going with this.
    Jerry

  • Can I add new zone section without drop the index

    Hi,
    Could somebody tell me is there a way to add new zone section for XML document without drop the index and then recreate it.
    Thanks

    in oracle 8i version there is no need for rebuliding index for creation of zonal section. Server process started by ctxsrv
    will do the dml .And later you can rebuild
    the index when you make many changes to documents.(not neccessary)

  • Tiny section mark (§) on the top right corner of t...

    After mobile e-mail setup (included phone reset, firmware update, backup etc.) a tiny section mark appeared on the top right corner of my E75 phone display. I have not found any explanation for the sign from documentation or anywhere. What does it stand for and how can I get rid of it ?
    Message Edited by jorde_05 on 20-Jan-2010 12:12 PM
    Message Edited by jorde_05 on 20-Jan-2010 12:12 PM

    There is a tiny lock sign on the top right corner of my Ipad could you please tell me what is that for? Because of that the facebook and other things are not opening properly and it takes a lot of time.

  • How to add styles to image in XML view ?

    Is it possible to add styles to Images in XML view ?
    <Image alt="alternate text " src = " " />
    I tried adding sytle= "align : right " but its not working. I just want to align this element in the view to the right.

    Hi Micheal,
    Pleas see the below code.
    View:
    <core:View xmlns:core="sap.ui.core" xmlns:mvc="sap.ui.core.mvc" xmlns="sap.m"
      controllerName="testing.imageXml" xmlns:html="http://www.w3.org/1999/xhtml">
      <Page title="Image">
      <content>
      <Image id="img1" alt="alttextimage" src="images/img1.jpg" />
      </content>
      </Page>
    </core:View>
    Controller:
    onBeforeRendering: function() {
      this.getView().byId("img1").addStyleClass("myimage");
    Index.html :
    <!DOCTYPE HTML>
    <html>
      <head>
      <meta http-equiv="X-UA-Compatible" content="IE=edge">
      <meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>
      <script src="resources/sap-ui-core.js"
      id="sap-ui-bootstrap"
      data-sap-ui-libs="sap.m,sap.ui.commons"
      data-sap-ui-theme="sap_bluecrystal">
      </script>
      <script>
      sap.ui.localResources("testing");
      var app = new sap.m.App({initialPage:"idhome1"});
      var page = sap.ui.view({id:"idhome1", viewName:"testing.imageXml", type:sap.ui.core.mvc.ViewType.XML});
      app.addPage(page);
      app.placeAt("content");
      </script>
      <style>
      .myimage{float:right !important; width:300px; height:200px;}
      </style>
      </head>
      <body class="sapUiBody" role="application">
      <div id="content"></div>
      </body>
    </html>
    Output :
    Regards,
    KK

  • How to add styles to the content on the screen

    Hi All
    I am able to dispaly the content of a .txt file on the screen using inline frames(11g adf using content repository- file system) . But 'm able to add styles to it like displaying it in bold letters. Any help on how to add templates
    Link which i followed http://download.oracle.com/docs/cd/E12839_01/webcenter.1111/e10148/jpsdg_content.htm
    8.3.1 How to Add Content as an ADF Inline Frame
    code
    <af:inlineFrame id="inlineFrame1"
    source="/content/conn/Test/path/test1/Test.txt"
    inlineStyle="height:100px; color:Aqua;"
    styleClass="AFStretchWidth">
    </af:inlineFrame>
    Thanks,
    Tim.
    Edited by: 831631 on Feb 16, 2011 11:00 PM

    hi Tim
    831631 wrote:
    Yes.
    • Consider a file Sample.txt file contains the text – “Hello World. Welcome”
    • Display “Hello World” in bold and display “Welcome” underlinedI don't think that adding style to a plain text file (as such) will be possible, you should probably use HTML or another document format.
    success
    Jan

  • How do you add preloaded shapes to mark up PDFs on the Adobe Reader Mobile App?

    I have Adobe Reader on my tablet.  I need to be able to make clean markups on PDFs when I do surveys.  I need to be able to draw straight lines, circles, arrows, and polygons neatly.  I am not able to do it with the free hand tool cause it is too messy.  Is there a way to add preloaded shapes when marking up PDF drawings? 

    Hi,
    Unfortunately, this functionality is not available in Adobe Reader on Android. We have made a note of the same and shall try to incorporate it soon.
    Thanks,
    Adobe Reader Team

  • Add Custom Library Section ?

    Hello,
    We have the out of the box Library sections, Movies, Tv Shows, Podcasts, Music, Audiobooks, etc....
    However how do you add a new section, such as Radio. I have a bunch of radio shows in mp3 format which are not podcasts, or audiobooks and I'd like to add a new section called "Radio". Is it possible to do this?
    How ?

    Make a "Smart Playlist".
    Click the "+" at the bottom left of iTunes and choose "New Smart Playlist".
    Select a common criteria for the Radio shows, be it Artist, Genre (Make a custom Genre such as "Radio" for them), or another tag they all share.
    You can also create a folder for ALL the radio shows and then sort into smart playlists by tags.

  • Section Marker Spacing

    I'm in InDesign CS4 on a Mac - I've created text based Section Markers for a book and for some weird reason there is no spacing between the words for each Section Marker "Title".  There are spaces for each title when I entered them in the "Numbering and Section Options" menu so I'm slightly confused.
    ie:
    This is what I get: ThisIsTheTitle
    This is what I want: This Is The Title
    Any suggestions?

    I've noticed this, too. If the section marker is used on a master page the text shows up as "Section", when it picks up compresses to fit on a single line, so if the text box isn't wide enough to fit the text, it compresses it to fit on a single line. (The word and letter spacing is ignored). Like so:

Maybe you are looking for