Add Suitability field in CO11N Screen.

Dear Sap Gurus,
I am doing shift wise production order confirmations.Right now i am using CO11 transaction and in that i am using
suitability(AFRUD-QUALF) field to enter shift.
But now i want to use CO11N transaction for production order confirmation,but in that screen there is no suitability(AFRUD-QUALF) field to enter shift.I am new in SAP so please guide me how to add SUITABILITY(AFRUD-QUALF) field in CO11N transaction.
Regards
Shankar

Hi
SAP offers enhancement package for shift wise confirmation.
ECC6.0 use enhancement 3.0
Customizing for Shop Floor Control under Operations - Confirmation in the IMG activity Define Confirmation Parameters. (OPK4 transaction)
In the proposal field in the shift area on the Individual Entry General tab. page, you specify which shift the system is to propose (set as the default value) in a confirmation.
After implementing the package go to OPK0 transaction, In default tab, shifts fields will be there.
Regards
Ganesh.M

Similar Messages

Add new field in CO11N Screen

Dear Sap Gurus,
My client needs to enter shift wise production through CO11N.
In CO11N there is nor field in which i can enter shift,thats why i want to add field Shift in that transaction.
I am new in SAP so please Guide.......
Thanks
shankar

Hi,
Refer this link
Re: Shift usage in confimation.
If you not using ECC 6 enhancement 3 then use screen exit CONFPP07 .
Through this you can create screen in Co11n
Regards,
Vishal

Process to add new field to Account screen and update value from R/3...

We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
What exactly is involved in this process?.
I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
Any help would be much appreciated.
Jason
Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

Jason,
If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
Thats it...
Regards, Sudeep..

Transaction DP97: Need to add 2 fields on selection screen...

Hi,
I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
2) where to add programming logic for this
Thanks in advance,
Minal

Hi,
Go to program RVPKMASS97.
Go inside INCLUDE rvpkmasspar.
(When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
Click on spiral icon there on the tool bar.
right click on the '
ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
now you can declare ur fields in this implementation.
After declaring save it and activate it.
Now go back to ur txn and run. you are able to see the custom fields on the screen.
Reward me points if it is helpful.
I think it will help you out.
Thanks,
Prasanna

Add custom fields on selection screen and ouput in Transaction QM11

Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.

Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

Add Custom field to standard screen with table control

Hello,
I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
Do i need to write any code?
I'm new to ABAP so could you please give a detailed explanation.
Also, do i need to change the 'fixed columns' field in the table control?
Regards,
Monica.

hi,
1) find the screen
2) add new fields to the screen
3) program PBO and PAI
regards,
Wojciech

Project system: CJE2 tcode.. Add the field to selction screen

Hi,
GM ALL
I would like to add the field to selection screen for a dynamic report one which is using in CJE2 T.CODE. I am trying to add the field through se36 [logical data base level] but its not helping.
Need to add below field to selection-screen
CJDB_SELIDS
Field: SELID_PR
Please let me know,if any one know the solution..
Regards
KK
Edited by: kirankumar2129 on Oct 18, 2011 10:03 AM

You need to have the SAP access key to modify the screen and add the field which already been added in VBAP using the Append structure in SE11
Thanks,
Babu Kilari

Is it possible to add a field in Attachment screen?

Hello Exports,
I wan to know is it possible to add a customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
David

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

Add new field to a screen

Hi,
I am trying to add a new check box to a custom screen. This check box must be connected to a new custom field of KNA1 table.
I have created a new z data element (CHAR) and a new z field on KNA1.
I have created the check box on the custom screen using screen painter.
When I change the value directly to the table I can see the change to the check box.
The problem is that I can't make changes through the check box (I change the value from the checkbox but after saving, the value doesn't cange to the table).
Is something more that I have to do?
Thanks in advanced.

In our custom screen there are other check boxes that are not defined on FIELD statement and they functioning (when I change them, the contents of the table field changes). One of these checkboxes
is called ZZDATA_PUBLIC.
I have noticed that there is a subroutine called batch_input_0200 that has among other the following statements:
DATA: my_bdc LIKE bdcdata OCCURS 10 WITH HEADER LINE.
PERFORM bdc_field TABLES my_bdc USING 'KNA1-ZZDATA_PUBLIC'
kna1-zzdata_public.
there are PERFOM statements for every field on the screen.
The problem is that when I add a new PERFORM statement for my check box the program does not save the changes (When I change the value of the screen fields and save the values does not pass to the table)
the code of the form bdc_field is the following:
form bdc_field tables pt_bdcdata structure bdcdata using pw_fnam pw_fval.
clear pt_bdcdata.
pt_bdcdata-fnam = pw_fnam.
pt_bdcdata-fval = pw_fval.
append pt_bdcdata.
endform.
can anyone help me?
Thanks
Edited by: Odysseas Spyroglou on Jun 10, 2009 8:08 AM

Add one field on the screen.

hi ,everybody.
i want to add one field on the progam SAPMV10A,it is VD05,The screen number is 300.the field name is TVLV-ABRVW.How can i do,thank you.

Check here:
SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payab;e --> Customer Accounts -> Master data --> Preparations for creating customer master data --> Adoption of Customer's own master data fields --> Businees Add-in:....

Add new field in selection-screen and output dynamically

hi gurus,
i need to add field in selectio-screen.
i need to validate the field with existing fields.
i need to add this in alv grid output list dynamically.
thanks & regards,
kgn9.

Hi
Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
IF SY-SUBRC = 0.
<BKTXT> = <.....>.
ENDIF.
Max

Add a field in selection screen and enter data in that field .......

Hi,
I want to add a field in the seletion screen and when the user enters data , it should store in the data base table, the data base table is MKPF-BKTXT, please can any one let me know how to do this... very urgent...

Hi
Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
IF SY-SUBRC = 0.
<BKTXT> = <.....>.
ENDIF.
Max

Product category: add description2 field to SC screen

Hi,
We are running on SRM 5.5(classic)..My query is on the SC screen....
In the SC screen if we do drop down list for Product cateogry..we will see the Product category id and product category description...so i want to add one more description2 to that...how can i add that field to that ITS scree..
experts..please help on this..
Thanks

Hi
You to configure in SRM SPRO
Go to--> SRM --> SRM server > technical basic settingsDefine Backend product category
Add the items here and save
Create SB you will get that
Try and confirm
G.Ganesh Kumar

User Exit to add custom field in Component Screen

Hi Friends,
I searched alot but could find exit to add custom field or tab in material component detail screen for SAP 4.7. Please let me know if there is any exit or workaround possible.
Thanks,
Raj

BADI is available to create custom field in material component , but it is available as of ECC 6.0 EHP3 , not sure about 4.7

Updating custom mseg fields from CO11N screen

Hello all,
When i save an order from co11n screen, it creates a record in mseg table.
I created some custom fields in mseg table and i want to fill them during this co11n screen fills the mseg table, but i couldnt find the correct user exit or enhancement.
Someone has done this before?

Put some debug statement and check the root cause.
http://oracleanil.blogspot.com/2009/04/favourite.html
And if you are running page locally then use
System.out.println("Test");Thanks
--Anil
http://oracleanil.blogspot.com

Add Suitability field in CO11N Screen.

Similar Messages

Maybe you are looking for