Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

Similar Messages

How to assign a iview to more than one page at a same time

Hi Experts,
I have created 40 pages. I have to assign ivews to these pages. One of the iviews is common to all the pages. Going to each page and assigning the iview to that page will take alot of time. Is there a way in which i can add an iview to more than one page at the same time?
Thanks in advance,
Prisford Pereira.

Hi
You can do that using XML Content and Actions.
You can write XML in specified format and upload it to portal, that will automatically create the content for you in PCD. You can create iviews, pages, assign iviews to pages etc.
More details are available at the how to guide.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47]
Hope this helps.
Best regards,
Ritesh Chopra

Can I add more than one movie to the movie page

I'd like to put up a gallery of movies but don't know how to do that. How can I add more than one movie to the movie template page?
Thanks,
Gina

I use the YouTube widget. It has the advantage of not loading clips until one actually selects the clip. When I started I just dragged the quicktime files to the page...not a good idea as it forced a viewer to wait for all of them to load.
Miro has some options.
Hugh

In Apple Mail, I cannot add more than one address to the "To" line

In Apple Mail, I cannot add more than one address to the "To" line by typing just the initial

HHow are you. Trying to add the second address? Normal procedure after the first address is to type a comma, then start typing the name for the second address.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

Welcome to the  Discussion Forums
It won't be a problem if you delete your extra copies.
I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

KEPM more than one period

Hi All,
In CO-PA planning KEPM, I would like to use period in row instead of header.
At the same time I want to plan more than one period.
Is it possible and how?.
Thanks
Regards

Hi,
If you have too much data, then you can try uploading the plan data using KEFC transaction (Planning functions>Weekly planning).
You can upload alternative period Week (ALTPERIO) value through uplaod file.
Hope this helps.

How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

Is there a way to put an item under more than one calendar at the same time?

I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
(Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe - on their devides and synching through cloud)

You can create many calendars. Here's the tip:
Example: you have 1 son and 1 daughter.
In iCloud ( https://www.icloud.com )
Create 1 calendar called Son ( Choose a color to tell them apart )
Create 1 calendar called Daughter ( Ditto )
Create 1 calendar called Kids
Since you are the creator, you get to see all calendars combined.
Send invitations to each of them
Son gets Son and Kids calendars
Daughter gets Daughter and Kids calendars
So if there an event for Son, just put in that calendar
If it's for both then enter it in the Kids calendar
Likewise for daughter.

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Insert more than one contact in the same page/document

Hello,
I have tried without success to insert more than one contact into the same page of a document.
For example, if i insert 2 Address book fields in a page, when i drag a contact from the address book then it populates automatically the 2 fields, and it is impossible to separate these fields and to populate them with 2 different entries (on the same page).
And when you drag more than one contact to Pages, it asks you if you want to create one document per contact.
Would it be possible to just insert 2 or more different contacts on the same page/document ?
Thanks in advance for any help,
Fred.

Unfortunately, this can't be done with Pages, nor could it be done with AppleWorks. I think the assumption is that you would merge into a letter & one letter sent per person. In checking the 3 postcard templates in Pages 3, none of them have address book fields to drop contacts into.
There is a workaround, but it might not be worth the effort. Create your postcard as a single, large document in page layout in landscape & merge to a new document. Then, in the print dialog, choose Layout from the drop-down menu that says Copies & Pages & choose 4 from the Pages per Sheet menu. You might also want to add a hairline border for cut lines.

How to bring the more than one rows from the table into the script

Hi
I have to bring more than one rows from the table into the Main windows of the script. so plz help me out.
Thanks in Advance
Ananya

Hi Ananya,
   Bring more than one row into main window of script.
   For this you need to do some changes for data which you pass to main window.At a time you need to pass more than one row,so for this you need to define one structure.See below code.
Types:begin of ty_rows,
     include structure (your row_structure),
     include structure (your row_sturcture),
Types:end of ty_rows.
for example....
If i need to pass 2 vendor details at a time to main window then the structure should be like this.
Types:begin of ty_rows,
       vendor1 like lfa1-lifnr,
       vendor1_name like lfa1-name1,
       vendor2 like lfa1-lifnr,
       vendor2_name like lfa1-name1,
      end of ty_rows.
Data:i_main type standard table of ty_rows,
     wa_main type ty_rows.
Based on condition you can pass more than one rows of your actual internal table data to i_main internal table.
Then you can pass i_main internal table to your main window.
    I think this will help you.
Cheers,
Bujji

How can I put more than One ComboBox in the Driving Frame of a Frame Driver

Hi,
I am working with a Frame Driver and I want that in the Driving Frame put more than one ComboBox to filter the report, for example, I want to put one combobox for City, another for Year, and another for Month, and when the user select the City, Year and Month and do click in Submit button, then in the Target Frame appears the information for those filters.
Does anybody know how to do that?
Thanks a lot.
Bye,

Hi,
It is not possible to have more than one combo in the source frame. This is because frame drivers can take only
two columns in the sql query, one is the display value and the other the return value.
Thanks,
Sharmila

More than one library (on the same computer) open?

In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
Is it possible?

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Can i create more than one library on the same computer?

Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

Similar Messages

Maybe you are looking for