Add table entry while client is not open

we only have access to SE16, no sm30 maintain table entry authorization, but this can be bypassed by <removed by moderator>.
thus we can modify existing table entry.
but I can't use this method to add additional table entry, any one know how to add entry using se16 debugging?
Moderator message: bypassing authorization checks is not supported in these forums.
Edited by: Thomas Zloch on May 25, 2011 12:03 PM

I can confirm those activities are checked and active.
SAP Note - 1129764 --> Users can actually see their original workbooks and the ones that have been 'saved as', they just want to be able to modify and just 'save' the original ones.
SAP Note - 1052085 --> This doesn't fit either, users have 'save' button disabled and can only click on save us. Besides we are already running on SP.14
Last note says: "Workbooks are not saved in BW systems that are not changeable.".
This is a statement that bothers me, indeed my client is set closed.
And SCC4 shows these paramenters:
Changes and Transports for client-specific Objects
   --> No changes allowed
Cross-Client Object Changes
   --> No changes to repository and cross-client customizing objs
Protection: Client copier and comparison Tool
   --> X Protection level 1: No overwriting
CATT and eCATT Restrictions
   --> eCATT and CATT not allowed
Restrictions:
(both unchecked).
Are you certain that it is possible to save them while the client is not opened? I'm starting to think that it just can't be done
Thank you for your help.
Regards,
Gonzalo

Similar Messages

  • Workbooks only able to 'save as' while system is not open

    Hi Gurus,
    My client has been working with it's BW system fully opened for the last three years.
    Users could then access a workbook through BEx Analyzer (wether it was in the role or favorites area) make any neccessary changes and then save it.
    Now that we have closed the system through SCC4 users claim that they are forced to 'save as' every time they make changes to any workbook. They simple 'save' option is now disabled (again, it doesn't matter if the workbook is in the role, or favorites area).
    I've looked through other posts but they don't state clearly wether they 'save' or 'save as'.
    I have checked that a SAP_ALL configured user is also unable to modify the workbooks and 'save' them, so I guess it's not a matter of authorization.
    Is it really the way BEx Analyzer works?
    Is it possible to regain the ability of simple 'saving' the workbooks without having to 'save as'.
    Regards,
    Gonzalo

    I can confirm those activities are checked and active.
    SAP Note - 1129764 --> Users can actually see their original workbooks and the ones that have been 'saved as', they just want to be able to modify and just 'save' the original ones.
    SAP Note - 1052085 --> This doesn't fit either, users have 'save' button disabled and can only click on save us. Besides we are already running on SP.14
    Last note says: "Workbooks are not saved in BW systems that are not changeable.".
    This is a statement that bothers me, indeed my client is set closed.
    And SCC4 shows these paramenters:
    Changes and Transports for client-specific Objects
       --> No changes allowed
    Cross-Client Object Changes
       --> No changes to repository and cross-client customizing objs
    Protection: Client copier and comparison Tool
       --> X Protection level 1: No overwriting
    CATT and eCATT Restrictions
       --> eCATT and CATT not allowed
    Restrictions:
    (both unchecked).
    Are you certain that it is possible to save them while the client is not opened? I'm starting to think that it just can't be done
    Thank you for your help.
    Regards,
    Gonzalo

  • Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
    I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

    I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
    First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
    1. Shut down the computer
    2. Reboot and open firefox
    3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
    4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
    5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
    6. Once it finally opens, backup your bookmarks,
    7. Download a copy of firefox from there website
    8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
    9. install the new copy and BOOM! it works
    If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

  • Mac Indesign CS5 and Suitcase Fusion 3 "Universal Type Client could not open?

    Has anyone got any idea what I can do?
    I have CS5 and on launch of Indesign, I get the message dialogue box:
    Universal Type Client could not open the Font Vault at the location "". To access your fonts, please launch the Suitcase Fusion Core System Preferences Pane to create a new Font Vault or to select an existing one.
    I have tried the following:
    made a new Font Vault adn selected it.
    logged-out
    restarted the mac
    reinstalled Extensis Fusion 3
    Any ideas?

    The best way to get support is to contact our reps directly. They can then walk through the issue with you and give you steps to fix.
    http://www.extensis.com/support
    Jim Kidwell
    Extensis

  • Editing a Table entry while debugging

    Dear All how can I edit a table entry in SE11 during debugging mode ?
    Regards,
    Alok.

    Follow the procedure.
    Step 1.
    Open the detail of the record that you have to edit in SE11.
    Step 2.
    Start debugging by putting /h.Press 'Enter' two times.
    Step 3.
    change the value of code from 'SHOW' to 'EDIT'.Execute.Now you can change the record.Save it.
    One restriction : You cannot change the key field by this method.
    Message was edited by: mukesh kumar

  • Staying connected to AIM while app is NOT open. Possible?

    So I just got my iPhone today after having the touch for awhile. My only complaint with AIM on the two systems is that the application logs you off your screen name the moment you hit the home key and open up safari, or any other application for that matter. Is there any program, or service (preferably free but I would be willing to pay for this feature) that will keep me connected to my AIM (msn wouldnt hurt too but not priority) while I do not have the application open at that time?
    Thanks in advance folks.

    Apple doesn't allow 3rd party apps to run in the background.
    Apple is working on a Push server for developers to access for such apps. When leaving such an app, the app won't be actively running in the background, but notification will be possible with a badge on the app's icon when receiving an IM with the AIM app and for others like it.
    Apple's Push server for access by the developers of such apps was originally scheduled to be available by the end of September but has been delayed. After the problems with the MobileMe launch, the delay is probably due to being sure the launch of this Push server is much smoother.

  • VPN client will not open or connect

    Hi,
    I'm running VPN Client 5.0.07.0440 on a Windows 7 Pro HP TouchSmart. The .pcf file is the same iI am using on many other machines om this same network.  When I double click the icon, the window opens up, but when I double click the connection entry, the dialog box says "connecting to security gateway at xxx.xxx.xxx.xxx for a few seconds and then says "Not connected."  I can't even get to the log-in screen I normally can. This is a new computer set-up. All updates are downloaded for windows. 
    I've uninstalled the client and re-insatlled it re-booting after every step. I've pinged the address and had no problems. Running Avast, Malwarebytes as on other machines. No other security software. My VPN is enabled in my Network Connections. 
    Here is my log file:
    Cisco Systems VPN Client Version 5.0.07.0440
    Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
    Client Type(s): Windows, WinNT
    Running on: 6.1.7600 
    Config file directory: C:\Program Files (x86)\Cisco Systems\VPN Client\
    1      13:05:53.644  07/05/14  Sev=Warning/3 IKE/0xE3000057
    The received HASH payload cannot be verified
    2      13:05:53.644  07/05/14  Sev=Warning/2 IKE/0xE300007E
    Hash verification failed... may be configured with invalid group password.
    3      13:05:53.644  07/05/14  Sev=Warning/2 IKE/0xE300009B
    Failed to authenticate peer (Navigator:915)
    4      13:05:53.645  07/05/14  Sev=Warning/2 IKE/0xE30000A7
    Unexpected SW error occurred while processing Aggressive Mode negotiator:(Navigator:2263)
    I know the names and passwords are correct as they were copied from working files.
    Hope this is posted to the right group.
    Never had this problem after many machines. Any help would be greatly appreciated. 
    Thank you

    Since you're getting the message "may be configured with invalid group password", perhaps your pcf file got corrupted. 
    I'd recommend you compare the profile pcf file (stored in "C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles") on the non-working machine with one from a working setup.
    They can be examined in a text editor or with a diff tool (like the freeware ExamDiff). The encrypted group password hashes (string in the file preceded by "enc_GroupPwd=") should match.

  • Cisco VPN Client is not opening on windows 7 64bits

    Hello,
    My problem : i instaled Cisco VPN client 5.0.07.0440-k9 on Windows 7  64 bits, the installation ends successfully. But when i restard the computer, when i click it doesnt open.
    Notice : when i restard the computer, it takes an infinite time the first rebooting ,  in the final stage of boot ( The black window with the Microsoft logo and  message Windows Is Starting ...)  '' it takes an infinite time so i force the reboot.
    started the same thread here but no answer yet.
    Thank you

    check your event viewer/System log.   You may see some entries stating that
    "The Cisco Systems Inc. IPSec Driver failed to start due to the following error: Windows cannot verify the digital signature for this file."
    disable digital signatures (NOT recommended) and cisco works fine
    I guess Cisco has already killed this program if they aren't even getting it certified.

  • I have windows 7 and my firefox client will not open, but it shows in task manager with 108k memory. Whats going on with my firefox?

    As stated on the question I have windows 7 and meet all the requirements. But when i launch firefox It wont start, but it shows in task manager with 108k memory.

    Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
    Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
    http://www.filehippo.com/download_firefox/7345/

  • My Add an Attachment link does not open, how do I get it to open?

    I open an email and try to add a document or picture using the Add Attachment link but it will not open. Nothing happens when I click on it. I uninstalled Firefox and re=installed it and it still does not work. It does work on Internet Explorer.

    Check your flash plugin is updated!
    *https://www.mozilla.org/en-US/plugincheck/

  • How to find out the changes made to the customized table entries

    Hi Team
    i want to know the changes made to the customized table. i have a 'Z' table in my production system, in that table i would like to know whether any table entry is deleted or not. if at all there is any deletion happened, i want to know who had done it.
    So i request you to please let me know the procedure for the same.
    Thanks
    Raj

    Hi Nagaraju,
                       Go to Table Maintenance (SM30)- Display mode-- Utilities-- change Logs. Give the Date range. before giving the date range click on display status , this will show you If the display is active or not. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • Table entries in the transport

    Hi,
    What are the steps to add Table entries(SM30) in the transport?
    I have added the entries using SM30 for the table, but it doesnt appear in the transport request.
    Please help.
    Thanks & regards,
    Yogita

    Hi,
    What I mean by 50 entries is:
    for example,
    In my transport there are 50 records for the table XYZ
    Source system table XYZ = 50 entries
    I want to move these 50 entries to TARGET system.
    TARGET system table XYZ had few OLD entries , lets say 20 entries.
    TARGET system table XYZ = 20 entries
    With the transport of 50 entries + old 20 entries, I get all 70 entries in my TARGET system table.
    But I want the table entries in TARGET same as SOURCE system entries that means 50 entries.
    Is this possible? Is there any option with which TARGET system can have records only as per the transported entries?
    Regards,
    Yogita

  • Adobe reader closes automatically while table entry is added by add button

    Hi Team,
    I am new in adobe form. I have developed an adobe interactive form using livecycle designer integrated with SAP. My form has a table and under that there is an add button. When the form is opened in adobe reader and  add button is clicked, I have written a javascript code which appends a new entry in the table above. Everything is fine upto here.
    Now when I keep on clicking the add button, new entries are created and table grows. But when the table populates the current page and grows to populate the next page, suddenly the adobe form closes. I think there is an inconsistancy happening as my configuration for the table or the subform wrapping the table and the add button is conflicting.
    Could you guys give me some advise on this. I can provide screenshots or the adobe document on request.
    Thanks,
    Mainak

    Hi,
    I would say you are definitely coming up against memory restrictions. There are a couple of posts by John Brinkman that I would recommend.
    First I would look at why the form is 6Mb and see if you can reduce this down. For example, select fonts that are already in Reader (like Myriad Pro) and then deselect Embed Fonts in the File > Form Properties > Save Options. Also do not embed images into the form. See:
    http://blogs.adobe.com/formfeed/2010/02/big_and_complex_forms.html.
    http://blogs.adobe.com/formfeed/2010/09/xdp-size-matters.html.
    http://blogs.adobe.com/formfeed/2009/11/linked_vs_embedded_template_im.html.
    Next look at your script. You mention loops, so check is your script efficient. For example, use xfa.resolveNodes() once outside of the loop, instead of xfa.resolveNode() inside the loop. Make sure that variables are declared. See:
    http://blogs.adobe.com/formfeed/2011/10/script-performance-exercise.html.
    http://assure.ly/kUP02y.
    Also check for any script that you have in events that fire frequently, like layout:ready event and comment these out. See.
    http://assure.ly/nB0Bvz.
    The dataset seems very large at 2Mb. Does this include image data? It may be that the user is interacting with the form, while it is still trying to process the XML and the loops.
    Hope that helps,
    Niall

  • While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

    While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

    I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
    Hope this helps.

  • In SharePoint 2010 Document Library "Open with Explorer" Your client does not support opening this list with Windows Explorer

    Hi.
    I am getting below error "Your client does not support opening this list with Windows Explorer" while click "Open with Explorer" option in document library.
    My system is client machine which is 32 Bit system and
    Web Client service is also running and Window 7 PC.
    Other SharePoint sites "Open with Explorer" option in document library is working fine but specific site is giving error.
    Even it was working fine but not is giving this error.
    Please help me on it. Its making frustrations.
    Thanks & Regards
    Poomani Sankaran

    Hi,
    According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
    Did you enable the both authentication (Windows and FBA) on default zone.
    As far as I remember when FBA is enabled on the same zone when Windows is used, it breaks whole client integration.
    So it will be better if you will recheck your architecture and will use different zones for Windows and FBA.
    There is also another thing to try: use claims based authentication with authentication provider which will work both with Windows and FBA.
    What’s more, you can also check with below steps.
    Use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    Add the site into Trusted sites to check whether it works..
    Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
    In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
    For detailed steps, visit the following KB page.
    http://support.microsoft.com/kb/841215/en-us
    There are some similar threads for your reference.
    http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for