Add text when importing?

I'm trying to setup a file name template in the import menu. I can add a token for date, year but when I try to add a custom text token by clicking insert; nothing happens. It worked in the previous version; anyone else having this trouble?

You are limited with the length of the file<<</div>
In what way? If you;'re talking about Photoshop, try making a 720 x 3000 canvas to create the text on. You can always add more or crop excess if needed.
Does Boris allow you to change fonts and sizes to allow for titles and sub titles? In other words, can you have more than one font in a text scroll?<<</div>
Absolutely. That why I use it.
-DH

Similar Messages

  • When I type I cannot add text when I select the text area and double click. Why?

    When I type I cannot add text when I select the text area and double click. Why?

    Premiere Elements 11  trial version for macMac computer photos uploaded to the timeline just finetrying to make a new title, streaming or in a framedouble clicked on the text in the box and nothing shows up when I type on my keyboard. I can delete the words that are there but not type in new ones. I selected the type and size, etc.
    Thanks if you can figure it out. I gave up!
    I may just un-install it all together if I can't get to work.Joanne
    Date: Thu, 9 May 2013 17:59:08 -0700
    From: [email protected]
    To: [email protected]
    Subject: When I type I cannot add text when I select the text area and double click. Why?
        Re: When I type I cannot add text when I select the text area and double click. Why?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Joanne Murray J2 What version of Premiere Elements are you using and on what operating system (including 32 or 64 bit) is your Premiere Elements installed? Forgive the questions if you have been there and done that, but I do not want to take anything for granted that might hinder a speedy resolution to your issue. Are you opening an already created title that is sitting on the Timeline in order to edit it in the Titler or are you trying to create a new Title (Default Text or other)? Do you know how to work with the Selection Tool and Type Tool in the Titler? Once I know what version of Premiere Elements that you are using, I will give you specific how to details. Thanks. ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5307494#5307494
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5307494#5307494
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5307494#5307494. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Unsharp text when importing tiff

    Hallo all!
    I´m working with a publication right now, i write music in a program called FINALE (www.finalemusic.com ). I export the Finaledocument to TIFF, and then import it into Indesign CS5  to do the layout and combine it with grapihcs etc...
    BUT...when i print the Indesigndocument, all of my imported TIFF-files are slightly unsharp. Not much, but it´s a differens betwen the text in the imported tiff-file and the text i wrote directly in the indesign-document.
    First i thought the problem was when converting to PDF, but i compared a PDF , a Indesign and a original finale-file of the same document and it seems that the "unsharpness" has to do with the TIFF...
    I choose even 600 dpi to be on the safe side but...
    Any idea how to solve this?
    Klas

    Check your Export settings. By default, bitmap images that are way over "the usual" dpi are downsampled to 300 dpi. It shouldn't be harmful because that ought not be visible unless you zoom in quite a lot on your screen. It does, though, introduce a small sliver of grey pixels around your original graphics.
    Can Finale export to a vector format? Print to PDF? That ought to work flawlessly.
    If you are stuck to bitmaps, you can select a high dpi setting -- your 600 dpi, or even better, as high as 1200 dpi -- and convert the image to Single Bitmap with Photoshop or another useful bitmap editor. Single Bitmaps can have a super-high resolution and still maintain a small file size, and they will not be downsampled to the usual 300 dpi: they will get printed at the fullest possible resolution. (*)
    (*) Well unless you go way nuts and select something like 2000 dpi. The exact numbers for single bitmaps can also be found and changed in the PDF Export options dialogue.

  • Why am I not able to add keywords when importing images?

    When I import images into LR, I am unable to add keywords in the relevant window. When I click in the window, it will not let me access. Very frustrating. Does anyone know why?

    Andrew,
    I've never seen this problem come up. Can you provide a screen shot? Is the keyword entry panel greyed out? (What do you mean by "will not let me access?").
    With a little more info or an example, we might be able to come up with the solution.
    mh++

  • Is it possible to add text when using flashing button property node?

    I am trying to get a text button that displays TEST to show "running"
    when it flashes.  I am using a property node for flashing. 
    At present it cycles between TEST and default color which is set in
    flashing clolor options.

    hi there,
    use the "Strings[4]" property of the button. right click on the property node and see online doc for more information about the meanings of the 4 elements of strings[4].
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

  • Fuzzy text when importing PSDs?

    I'm trying to bring text-heavy PSDs into an iMovie widescreen film. Over and over again, the text falls apart. Anybody know a work-around/proper specs for the PSD to come in crisp?

    Hello, thank you. I have chosen flash text.  Which has sorted the fuzzyness...so big tha
    nk you.  !!  The text has now converted to times new roman?
    ..any suggestions as to how i keep the text chosen when working in indesign file?
    Sorry..im a newbie!

  • "wrinkle" in text when importing from Motion to DVDSP

    I created a motion menu in Motion and imported in DVDSP. Looks great in Motion. In DVDSP the largest title is not clean. It has a "jag" through several letters along the same horizontal line. Anybody have an idea?
    thanks

    It is "not clean" in the final built DVD as well.
    I think I may have solved the problem. If I start with the 720 x 480 canvas (not the 720 x 486) and cut and paste the template I need to use (which is 720 x 486) and then pull it into DVDSP it works! The difference of 6 pixels creates these odd wrinkles.

  • I edit my photos in Photoshop, save as jpeg then import back into iPhoto.  But if I add text to an image in Photoshop can't save as jpeg but as psd. Is there any way I can change to jpeg in iPhoto?

    I edit my RAW photos in Photoschop CS3, save as jpeg then import back into iPhoto 11.  If I add text in Photoshop I can't save as jpeg but as psd.  Is there any way I can change to jpeg in iPhoto?

    Terence Devlin wrote:
    Yes you can. But you need to flatten it as jpeg doesn't support layers.
    While the final JPEG can't have layers, it is not necessary to flatten the original Photoshop file to create a JPEG. There are two ways to make a JPEG while not losing the flexibility of preserving layers, and they both flatten on the fly while saving.
    I just tried this in Photoshop CS3 myself. When I add a text layer, and choose Save, the Save As dialog box comes up and defaults to PSD as was described. But... that is just the default! Go ahead and choose JPEG from the Format pop-up menu down below the file list. JPEG is in there. So what happens to the layers? Notice when you choose JPEG, the Layers box grays out and the "As A Copy" box grays out and is checked (i.e. you cannot uncheck it). What is going on here is Photoshop will gladly make a JPEG of your layered file, but it will force the JPEG to be a copy, so as to not overwrite the original layered file. This is good, because your Photoshop file with its editable text layer is preserved, and you get a JPEG copy to put in iPhoto.
    The second way is, instead of doing Save or Save As, choose File/Save for Web and Devices. This will also give you a JPEG choice, and also create an exported copy. Because this way makes files for the Web, they will be smaller than JPEGs from Save As because they will lack built-in previews (which you don't really need these days) and other extra metadata that take up space.
    Either way you get a JPEG you can toss back into iPhoto.
    Terence Devlin wrote:
    Only by exporting.
    The Export menu in Photoshop CS3 does not have any direct choices for JPEG.

  • Having several problems with Adobe Premiere Elements 13.  Right now my worst is that when I add text to a clip, it goes out of "auto color" while the text is up.  Help?

    I'm having a number of problems with Elements 13.  One is that, while in "play" mode, the sound will just stop happening.  I have to click "pause" then "go" again and the sound comes back.  It also stops playing on it's own, I have to hit "play" repeatedly.  Just got the software, have been using it extensively for a week or two, and this just started happening.dor
    Now today, when I add text to a clip, it drops out of "auto color" while the text is visible in the clip, then back into auto color when the text is gone.  Any suggestiosn?

    nikovichb
    If we are looking at the same thing, you have called attention to one strange Premiere Elements 13 AutoColor/Titler interaction. This can be reproduced in the Expert or
    the Quick workspace. I will demo this in the Quick workspace since that is where you have been working.
    1. Import a still into the Quick workspace/Filmstrip.
    2. With the still selected, go to Adjust Tab/Adjustments Palette/Color Panel expanded and just click on the Auto Color Tab. Close the Adjust Tab route.
    3. Go to Text Menu/New Text/Default Text to open the project's Titler. When you do that you see the following and not the still over which the text title is to go.
    And when you close the Titler, you then see the "Add Text" text title in the still.
    The only solution that I can think of at this time is to create the text title and then apply the Auto Color to the still.
    It is interesting that this only happens with the Auto Color in the Color Panel selected. If you do not click on
    Color Panel and use the More options for Color adjustments, this behavior does not take place.
    Deletion of Adobe Premiere Elements Prefs file does not correct this situation.
    As for
    I'm having a number of problems with Elements 13.  One is that, while in "play" mode, the sound will just stop happening.  I have to click "pause" then "go" again and the sound comes back.  It also stops playing on it's own, I have to hit "play" repeatedly.  Just got the software, have been using it extensively for a week or two, and this just started happening.dor
    I think that here we need to explore project settings (project presets), properties of source media, and Timeline rendered and unrendered content prior to export.
    Please review the above
    a. verify if the Auto Color Text Title glitch that I saw is what you described in your situation
    b. give the details of your project so that we can explore cause and effect for Timeline content playback irregularities as seen in the Edit area monitor.
    Thanks.
    ATR

  • How do I add text to a photo when making a calendar from iPhoto?  I see the text box for the dates but not for the actual photo...thanks.

    I can't find a way to add text to a photo once it's been put into the top pane of the calendar month...is there a way to do this since I'd like to add a descriptor to the photos?  I see the text box when you click on the calendar date, but don't find one for the photo pane.  Thanks for any assistance.

    Right - you can not add text to photos with iPhoto - you must use an external editor
    LN

  • Is there any way to add text or arrows onto photos in iPhoto when creating a book?

    I am creating a photo book (Album), in iPhoto, in Projects. There are some place where it would be helpful if I could draw an arrow on the Photo to indicate certain places. I also would like to add text onto a photo in the book. This is as well as typing in the 'text box' provided. It needs to be on the actual photo in the book. Is this possible? I am using Version 9.5.1 which i think is the latest and i am running on Maverick on my iMac.

    There is no way to add anything to the face of a photo in iPhoto at all You will need an extenral editror for that kind of work. You can add text and arrows etc with Preview, already on your Mac or with apps like these:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate or the App Store.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

  • I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

    I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

    I figured it out...needed to use comment tool set, not the editing tool set.

  • #MULTIVALUE error when I add Text in a cell

    Hi,
    There is a funny error occurring in the report.
    I have build this report on Excel sheet. The sheet has ONLY 4 rows,(and it always will have 4 rows).
    Following is the format of the Excel sheet:
    Plant    Division           Comment1           Comment2   Week
    1            10                   A                        E                 4
    2            10                   B                        F                 4
    3            10                   C                        G                4
    1            20                   D                        H                 4
    In the report I have made a connection on the Excel sheet. I have made made the fields Plant,Division,Comment1 and Comment2 as Dimensions and Week as Measure.
    In 4 different cells, with 4 combinations on Plant and Division, I want the following output:
    - Comment1: A
    - Comment2: E
    When I put the formula: =([Comment1] where ([Plant]="1" and [Division]="10")) + ([Comment2] where ([Plant]="1" and [Division]="10"))
    it returns Correct Results.
    But when I add Text values in the formula it returns #MULTIVALUE error:
    Example:        ="- Comment1: "+ ([Comment1] where ([Plant]="1" and [Division]="10"))
    Where am I going wrong?
    Thanks,
    Amrita

    Hi Amrita,
    This is because when you are going only with the formula, it will provide you the value for one cell and blank for other.
    But when you are going with the comments as well, you will get 4 values for this. (one for each row)
    1. -Comment1:
    2. -Comment1:
    3. -Comment1:
    4. -Comment1: A
    So when you are selecting this in a single cell it will throw you #Multivalue error.
    Hope it is understood.
    Regards,
    Subrat

  • Using imovie error message when trying to add text to my project

    When I try to create a project in imovie everything is working fine.  When I try to add text to my project I click on the T to add text and the program shuts down.
    Do I need to re- install something again?? any suggestions??

    What is your operating system?  Reader version?

  • When importing from a Word document placing the text in InDesign

    When importing from a Word document placing the text in InDesign I can only see the text from the first page of the Word document. I have increased the number of pages in the Indesign document to more than what is in the Word document, still only text from the first page is shown. What am I doing wrong or did I not set a setting correctly?

    When you want to auto flow text while placing, hold down the Shift key when clicking with the Place cursor on the first page. New pages will be generated and text will be auto flowed using the margins set up on the master page.

Maybe you are looking for

  • Service Desk: How do i Reply back to a support message?

    I  am in the process of configuring the servcie desk. I am using Solution manager 4.0 sp13. I am recieving the messages in the Service desk, and the suport  team members are able to get their respective messges based on  the PFAC responsibility rules

  • MRP - VB type deletes already created purchase orders

    Dears, Recently sth happened with MRP planning for materials with VB (reorder point) type at my client. If stock is below reorder point MRP generates  requisition correctly. But when requisition is converted to purchase order and delivery date is cha

  • Album sort order missing

    I want to use 'Recently Added' in album view while hiding all rated albums. I do not understand why the new 'album' sort order is restricted to only a few fields, while the 'songs' sort order doesn't have the two-level; sorting that the album sort or

  • Constructing a buffer to hold bytes going to socket

    I'm a newbie and struggling with a project to construct a multi-threaded Web server that enables a browser-client to access an HTML file. I've constructed a 1K buffer, but if I want to examine various file transfer rates with different file sizes, I

  • Infoset Query Usage

    Hello All, I am trying to create generic data source in RSO2 by using Infoset Query Method.I would like to extract around 7 lakh records from it. my query is: how about desiging an infoset query which has to pull around 7 lakh records once in a month