Add the custom infotype in Fast entry screen

Dear All,
                   I add the one new created the custom infotype in the fast entry screen but when am going to create the entry threw pa70 transaction in that case my table control which is been in that infotype is not in editable mode means it's only display mode ..
Kindly help me to fix this issueees.
thanks
Regards
Sandeep Dabral

Hi Sandeep,
Can you share the steps to create fast entry screen to custom infotype? Also is it possible to create custom TCODE to access this instead of PA70?

Similar Messages

  • How to add the field sapcomponent in fast entry screen

    Hi ,
    This is reg the support message which is created using crmd_order.
    I have a requirement in which the field  sapcomponent in the transaction tab which
    has to be placed in the fast entry tab also.On populating this in the fast entry screen the same value
    should also be populated in the transaction tab.
    Guide on how to create the field in the fast entry screen and how to link it with the transaction tab.
    Step by step procudure to achieve this is appreciated.
    Regards,
    srikanth.

    Hi Ana,
    Greetings and Good Morning.
    We are currently going through the implementation of electronic nota fiscal in R/3 and have already implemented the old data sources and BCT for the same. Do you have any idea for enhancing the new data structures. Looks like you have gone through this recently.
    Do you have a new BCT available for the same.
    Kindly send me some info.
    Thanks
    regards
    MS

  • How to add fields in custom infotype and update its screens

    Hi Experts
        I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release.   is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

    Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the u2018Employee Infotypeu2019 radio button.
    4) Select the u2018PS Structure Infotypeu2019.
    5) Click on Createu2026 A separate table maintenance window appearsu2026
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on u2018Allu2019 push button. It takes a few moments.
    10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
    11) Click on u2018Changeu2019(pencil) button
    12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
    13) Give u2018T591Au2019 as subtype table
    14) Give u2018T591Su2019 as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
    18) Click on u2018Changeu2019 (pencil) button
    19) Click on u2018New Entriesu2019
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirementu2026
    25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
    27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Donu2019t forget to u2018Activate at every level
    i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

  • Fast Entry Screen for infotype

    Dear Freinds,
                  I want to have Fast entry for infotype 0008 . Could any one let me know whether Fast entry is possible for 0008. I can see there is fast entry for 0014 and 0015. If possible for infotype 008
    can you please let me know how to do . I have tried in the SM 30 using the table T588Q but what
    what is the Selection Report i have to use.
    Thanks & regards
    madhuri

    Hi MAdhuri,
    You can change the entry screen for fast entry,
    in  Img
    Personnel Management-. Personnel Administration-> Customizing User INterfaces-> Fast entry Actions-> Change screen for Fast entry
    Warm REgards,
    KPAil Kaushal

  • Infotype 0007 in fast entry screen

    Hi experts,
    I want to add infotype 0007 in fast entry screen i.e. pa71. This in not in the table T588Q .
    Can u tell me what is the steps to add this infotype in pa71. No help view I'm getting from Help of PM01 tcode.
    Thanks in advance.
    Goutam

    Hi Goutam,
    refer the following link it may be usefull.
    Re: PA71 - Fast Entry for Time Date, how to add 0007  for Fast Entry
    Thanks
    Partha

  • Only G/L accounts can be entered on the fast entry screen

    We are currently upgrading our SAP environment from version 4.70 to ECC 6.0.  Our users are testing their Parked Document fast entry screen entries created through F-65 and when they attempt to "view" their entry on the Fast Entry screen, after entering their data, they receive the message "Only G/L accounts can be entered on the fast entry screen" (message FP032). The system will not let them post the entry. The account field in the original fast entry screen was limited to 6 numeric digits, which is the length of our GL accounts  and also the length of the account number used in the field when entering their posting.
    I created a new fast entry screen layout for parked documents that opens up the field length to 15 characters and all works great.  But I would still like to know why the original fast entry screen posted the error on the fast entry screen for an account number with the correct amount of digits.
    Thanks,
    Mary Lauber

    Dear mary
    Run program RFFAKP01 via transaction SE38. Enter program SAPLF040 / application PRPOS. Click on Execute.
    This will regenerate the fast entry screen including your customized templates. And also, please check with O7E4/O7E5 to see if everything is set correctly.
    If it helps please reward with points.
    Best Regards
    kesav

  • Fast Entry Screen in HR

    Hi,
    Can anybody tell me what are the steps involved in creation of fast entry screen of custom infotype?
    can we attach it to custom TCODE instead of PA70?

    The issue was resolved

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • Fast Entry screen for SO?

    Is there any fast entry screen for creating Sales Orders (VA01) exist in SAP? Read in somebody's blog that such thing exist but they hadn't posted any details about that.

    I Maheshwaran,
    There is Fast Entry Function which you can execute in VA01 or VA02 (in change mode).
    Open the order screen Choose from Menu bar Edit --> Fast Change of
    a. Reason of rejection
    b. Delivery block
    c. Billing Block
    d. Delivery date
    e. Delivery Priority
    f. Plant
    You can apply the blocks and entering reason of rejections. Choose the material and click fast change of and choose delivery date(you can change the delivery date) but no subsequent documents should have been generated.
    Similarly we can change By choosing the item line and choose Plant (for changing the plant) even for this you should not have subsequent documents generated, cause it doesn't serve the purpose. you can change the delivery priority too.
    b. Fast entry Screen we relate to CMIR - Customer material information record which helps us to create and execute transactions at a better pace.
    Regards
    Sathya

  • Special Gl indicater in Fast entry screen

    Hi experts,
    Is it possible to add the Special gl indicater field in Fast entry screen in O7E6, i have already checked in the Possible Fields, spl. gl is not available.
    so please guide me how to add the field in possible fields(with technical names)
    I want to pass the customers related entries through fast entry screen
    regards
    sai krishna

    In the standard layout fields, it is not available.

  • Fast Entry Screen for f-54 & F-39

    hai,
    Any Fast Entry Screen is available for F-54 & F-39 for down payment clearing.
    govind.

    Hi Govind,
    No fast entry screen is available for both transactions as it is only meant for clearing invoices and not passing line items.
    The transactions screens are designed in such a way it caters only to specific transaction needs.
    Hope this helps.
    Pls award points....
    Vinay

  • Fast Entry Screen issues

    Hello experts,
    Could someone explain the copy and paste feature of fast entry screens please? I created a new template and have the text field with 22 length size so that I could include other fields required by user (total limit being 82). The test field originally have 50 length size. So, when I copy and paste a range of cells (each with 50 length) for the text column, it gets split after 22 characters and the rest gets pasted over to other fields. But when I copy and paste a single cell of the text field, it gets copied to one single text cell completely (all 50 characters) with out getting spread out to other fields. Anyone can explain this and perhaps provide a solution?
    Thank you.

    well i am sailing in the same boat as you guys . if you guys have solved it let us know
    thanks
    Anand

  • XRPM Resource management fast entry screen

    When I user the staffing in resource management, I can see the project for which I have been assigned as resource manager and also resources in my pool. But the entry screens are non editable. Is there any setting to make this fast entry screen editable
    Thanks

    Hi,
    Please check whether you have the resources in the Staffing filed or not.
    I would suggest if you can have it after the Cache clearance once, if you are checking the above functionality immediately after creating the resources.
    As you said you have the Project manager and other resources as viewable, please also check their availability maintained during the period.
    Hope it will solve your query.
    Regards,
    Nishit

  • WBS in fast entry screen

    hi,
    i need WBS in fast entry screen. where do i activate. Can any one help me in this regard.
    govind.

    Default screen itself you can find the WBS element in the Fast Entry Screen.
    even if it is not there ,
    check in teh field status,
    OBC4, here check which field status varient you are used,
    change teh WBS element status &
    check OB41 , here you check teh posting key you are used,  , then change teh field sttus for teh posting key.
    chandra
    CHANDRA
    Edited by: Chandra Sekhar Reddy.Botla on Feb 6, 2008 11:52 AM

  • Business place in fast entry screen

    hi,
    how to include business place in fast entry screen? Can any one suggest me on this.
    govind.

    HI,
    give some idea for the area to be checked for enhancement.
    govind.

Maybe you are looking for