Add the time stamp ater file name (suffix)

Hi friends,
i need help for below requierment.
I want to add the time stamp for my file name.
like *filename YYYY-MM-DD-HH-MM-SS.txt*
i don't know how to wirte the UDF for this. please any help me on this.
thanks
Srini..

Hi,
You have to Use Add Time Stamp Option in the Receiver File Adapter--Under File Construction Mode
Check this
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
REgards
Seshagiri
Edited by: N V Seshagiri on Oct 14, 2008 2:02 PM

Similar Messages

  • Need to add date/time stamp to file name without time change creating new files

    We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
    I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
    into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
    Attachments:
    TimeInFileNameQuestion.jpg ‏46 KB

    I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
    Attachments:
    FileNameTest.vi ‏29 KB

  • Help adding current Date and Time stamp to file name

    I need help with my script adding current Date and Time stamp to file name.
    This is my file name = myfile.htm
    I would like to save it as = myfile.htm 8/29/2007 11:41 AM
    This is my script:
    <script>
    function doSaveAs(){
         if (document.execCommand){
              document.execCommand('SaveAs','1','myfile.htm')
         else {
              alert("Save-feature available only in Internet Exlorer 5.x.")
    </script>
    <form>
    <input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
    </form>
    Thank you

    I agree, I guess I overlooked that!
    I would like to save it as = myfile 8/29/2007 11:41 AM .htm
    I need help with my script adding current Date and Time stamp to file name.
    This is my file name = myfile.htm
    I would like to save it as = myfile 8/29/2007 11:41 AM .htm
    This is my script:
    <script>
    function doSaveAs(){
    if (document.execCommand){
    document.execCommand('SaveAs','1','myfile.htm')
    else {
    alert("Save-feature available only in Internet Exlorer 5.x.")
    </script>
    <form>
    <input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
    </form>

  • Ignore time stamp in file name to load infopackage

    Hi
    Everyday a .csv file gets written into a particular folder in my application server. the filename is as TESTYYYYMMDDHHMM.csv.
    Now i have written a program to pick up the file with TESTYYYYMMDD, but the time stamp doesnt match, hence i have to ignore it when i read the file.
    Can someone please tell me some simple logic/Abap code to ignore the time stamp in the name? i have tried using TESTYYYYMMDD*.csv, but that doesnt work.
    Please help. this is very urgent.
    Thanks
    Sushmita

    I read the content of the folder into an internal table usign EPS_GET_DIRECTORY listing. i cud read that into a variable, using a simple loop.
    and pass it to the Infopackage as file name.

  • Trimming Time Stamp in File Name using IC

    Hello,
    scenario is File to File without mapping. We are using Integrated configuaration to achieve this.
    Issue is on target side file name is being written as xyz.ddmmyyyy-ssssss
    but we need to eliminate milliseconds and need target file name as xyz.ddmmyyyy only.
    any inputs on how to achieve this please? I am struck here as we cant use UDF since we do not have mappings.
    Thanks.

    Hello,
    Aside from scripts, you can use an adapter module to fulfill your requirement:
    http://wiki.sdn.sap.com/wiki/display/Snippets/DynamicfilenameinaFiletoFilepassthroughscenario
    Hope this helps,
    Mark

  • Photoshop Elements 12 is failing to add the jpg extension to file names when I "save as" even though the jpg format is selected in the drop-down list

    I've just been following my normal workflow and all of a sudden my saved files don't have the jpg extension. I'm not having this problem in other photo editing software I use. I haven't changed any settings. Anybody else have this problem?

    The Local Settings folder is a hidden folder.
    (1) If the file appears in the Downloads manager (Tools menu or Ctrl+j), you can right-click it and use Open Containing Folder to get directly to it.
    (2) To be able to see hidden folders on Windows XP in general, try this:
    Open My Computer or Windows Explorer
    Tools > Folder Options > View tab
    Scroll down and look for the checkbox regarding hidden files and folders and unhide them.
    Hopefully this will resolve the issue. Any luck?
    (3) By the way, you may be able to save the images from the email message to a more convenient location by right-clicking the links and using Save Link As. (Before you open them for editing.)

  • Want to append time stamp to file name in log4j property

    Hi
    I want to append the timestamp to name of log file.
    here i am attaching my sample log4j.property file
    plase heple me for correct syntax
    log4j.logger.bar=DEBUG, dest1
    log4j.appender.dest1=org.apache.log4j.DailyRollingFileAppender
    log4j.appender.dest1.layout=org.apache.log4j.PatternLayout
    log4j.appender.dest1.file=log.log
    #log4j.appender.dest1.append=true
    log4j.appender.dest1.datePattern='.'yyyyMMdd
    log4j.appender.dest1.layout.ConversionPattern= %d{dd-MMM-yyyy HH:mm:ss aaa} [%3p] %n%m%n%n
    log4j.appender.dest1.encoding=UTF-8
    log4j.logger.foo=DEBUG, A2
    log4j.appender.A2=org.apache.log4j.RollingFileAppender
    log4j.appender.A2.layout=org.apache.log4j.PatternLayout
    log4j.appender.A2.File=example1.{timestamp}.log
    #log4j.appender.A2.append=true
    log4j.appender.A2.layout.ConversionPattern= %d{dd-MMM-yyyy HH:mm:ss aaa} [%3p] %n%m%n%n
    #log4j.appender.A2.datePattern='.'yyyyMMdd
    log4j.appender.A2.encoding=UTF-8

    Is your google broken?
    http://www.google.com/search?q=log4j+timestamp+syntax+examples

  • How to display the time stamp in a data log table

    Hello,
         I want to display data during the data acquisition process. How do I  add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
    Thanks,
    Ryan
    Solved!
    Go to Solution.
    Attachments:
    Cycle Analysis.vi ‏229 KB

     I inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
    Attachments:
    Result.JPG ‏54 KB

  • How can i add a time stamp to tdms file?

    I want the data and the time for the tdms file generated?
    how can i do that?
    should i cinvert .tdms to .lvm and use the data storage option or excel add on option for .lvm file created?
    cant i directly have the time stamp for tdms file generated?

    How are you acquiring the data in the first place?  That will matter in how we want to approach this.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • *.eml Time Stamp - Select File in Windows Explorer Changes the Modified Date

    The Windows Live Mail *.eml files time stamp is getting changed to the current date when the file is selected in the Windows Explorer! I save backup copies of important E-mails to folders on the Hard Drive and then synchronize them with the same folders on other LAN Hard Drives for backup archives. When these E-mail files are selected or opened from the Windows Explorer in the Windows 7 OPS the Modified Date Time Stamp is changed to the current date automatically! This action creates a real problem when doing later synchronizations of all of the folders! The date will not be the original date of the E-mail and the original file will be over copied with the file with the newest date stamp. I stopped Indexing on the *.eml files and that stopped the time stamp change when overcopy synchronization, but if the file is selected during a viewing in Windows Explorer then the Time Stamp is updated to the current date again! A solution to this problem would be greatly appreciated if anybody knows of one. Thanks - - - Shorto

    The Date and Timestamp changing issue in Windows 7 has a two part fix!
    1. Disable the Indexing of the *.eml file type in the Indexing Options located by Clicking on "Control Panel" -  "Indexing Options" - Advanced Button - File Types Tab - scroll down to the .eml file type and uncheck the Box then click OK to finish, so
    that the Email type of files won't be Indexed.
    2. Delete the Registry Entry listed below, be sure to Export and Save the original Key so it could be Restored if something goes wrong!  \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\PropertySystem\PropertyHandlers
     and Delete the .eml entry
    That should fix the problem with the changing Date/Timestamp of Email Files. For more information read CarlS's WindowsSeven Fourm thread where I also have more input:
     http://www.sevenforums.com/browsers-mail/35334-eml-files-timestamps-updated-constantly.html
    This should give you a better understanding on the problem and the Fix. - - - Shorto

  • How to add a time stamp to a video edited in Photoshop CC?

    Hello fine ppl of Adobe communities.
    I was wondering how can you add a time stamp to a video when edited in PS CC, is it possible at all? I dont have premier but I do have PS and LR.
    Appreciate any help.
    thanks

    If you use File > Place Embedded, you'll be able to resize and place (move, rotate, etc.) images as appropriate in your open document with the added bonus of having them added as Smart Objects. (Note that using Smart Objects can greatly increase the file size of your document. Just be aware.)
    File > Place Embedded > resize and place (hold down Shift to constrain proportion as you resize) > confirm by clicking the checkmark or "commit" icon.
    For layers that already exist, right-click the layer in the Layers panel > Convert to Smart Object.

  • How to add a time stamp to an array

     Currently the VI that I have attached has the capacity to log data from the set of 14 arrays. I currently have a tick counter hooked up. However, I would like to add a time stamp that will display the elapsed time in seconds from the begining of the data logging. Could anyone help me out with that? Please see the attached VI and sorry for how messy it is, I have yet to go back and clean up the wiring. 
    the mess of arrays on the lower left hand of the while loop feed into the "Index Array" building block and from there they will be scaled (for most of the wires the multiplyer is just there so that I can see what channel they will be when I hook it up for logging) The wires then feed into a "Build Array" Building block and I assmed that is where I had to hook up the time stamp for me to be able to log it.
    Thanks,
    Attachments:
    PDAQ56 datalogging V11.vi ‏104 KB

    mets501 wrote:
      Also, try pressing Ctrl-U on the block diagram.  It cleans up the wires for you atomatically :-)
    Jeremy
    That tool does not exist before LabVIEW 8.6.  The original poster attached a VI from LV 8.0
    Attached is the VI where I ran Block Diagram cleanup in 8.6.1f1 and back saved to LV 8.0.  I went through and cleaned up almost all the coercion dots as well.
    The original poster should start working from this file since it is much cleaner than the one they posted.
    Attachments:
    PDAQ56DataloggingV11.vi ‏84 KB

  • Add Date/Time Stamp to Timecode Effect

    The Timecode effect of CS5 Premiere Pro is a very useful feature. However, it is missing a Date/Time Stamp. I would encourage everyone to submit a feature request for this. I have enclosed one I submitted. You can cut and paste it into the Feature Request Submission Form.
    Feature Request Submission Form
    Feature Request: Add Date / Time Stamp to Timecode Effect
    The Timecode effect of CS5 Premiere Pro is a very useful feature. However, the Timecode effect is missing the ability to also display the Date/Time Stamp from Premiere captured video. This is a very important feature to include. Many videographers are archiving their miniDV tapes as AVI files since disk prices have become affordable. When I retrieve archived AVI files, I often need to look at the Date/Time Stamp, but unfortunately, Premiere does not offer that ability.
    I would encourage you to add Date/Time Stamp capability to the Timecode effect so timecode, date, and time could be displayed all at once, or selectively picked via checkboxes.
    Others in the Premiere forum have requested this capability.
    Date / Time Stamp - Premiere CS4
    http://forums.adobe.com/message/2564766
    Hopefully, you could add this as an update to CS5. And hopefully, as soon as possible. Thanks

    I am fairly new to Adobe CS6 however I have to totally disagree with some of the replies here on this subject. The package cost me well over £1200 and I expect a say in improving it along the way if I am to progress on to CS Cloud. The suggestion that engineers could spend their time elswere is total rubbish,its what they are well paid for..to listen to consumers suggestions and act on them (I am paying for their time).  I would for one love to see the simple add in plug where the original date/time code could be added and burned into the video timeline. It is obvously not something needed by all but for some it could be essential. For my work I entirely rely on the original date/time code to be visible and burned in. My work is editing surveilance video and I also have to pixellate all faces of young persons so the addition of a date and time code plug in is something I would like to see in After Effects and Premier. Adobe add hundreds of filters/plug-ins that nobody in the world are likely to ever see or use or even asked for, so I cant't see why it would be a big task for them to include it in CS6 or Cloud for the future, especially as many ask for it.
    On the suggestion of DVMPro, yes this is an excellent package which I already use along with vATS (which is quicker),  however the big downside for both these programmes is they do not combine the clips so if I put in 60. mts clips I will get  out 60 clips of what ever format I picked (limited to AVI/Wmv/AVCHD). You would then need combine and re-render the clips or work along the timeline with lots of clips (obviously not in AE as it wont combine clips along one layer....at least I cant see a way to do it (no doubt will be flamed on that one)
    Sony vegas 11 also does not have the capability neither to add and burn in the original timecode however there is an excellent and tiny .dll third party extension called SVDTS that will add the original time/date/seconds to the timeline and burn in to the video. My point on this comparison is that it would not take a lot of time and work for a capable Adobe enineer to develop and implement such a plug in.
    A crude way and free to actually achieve this is to use Freemake Video Converter, add all  your .mts (or what ever format they are so long as its original), turn on the Subtitle 1 option for each clip (no batch turn on Im afraid) and chose to join the clips for output to what ever file format you choose. The original timecode and date will be on your output video clip, not as pretty as DVMPro or vAts but is there and accurate.

  • Writing time stamp to file

    Take a look at the attached pic.
    Okay, now how can I have the time stamp written to the file along with the other data?
    It should be an easy thing but I can't make it work.
    Any comments will be helpful.
    Thanks
    Attachments:
    timestamp.PNG ‏8 KB

    A timestamp in not a signal data type so you can't use the merge signals. This is how I would do it. The convert to dynamic data type is probably optional. I hardly ever work with that.
    Message Edited by Dennis Knutson on 03-13-2007 01:47 PM
    Attachments:
    Add Timestamp.PNG ‏3 KB

  • I have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?

    i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
    where is the data stored when i moves messages to the imported pst?
    after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?

    I am not sure what you mean by this.
    is it ok to delete outlook ID's copy/backup as running out of space?
    If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
    Are you updated to the latest version of Office?
    After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
    This may help:
    http://www.officeformachelp.com/outlook/troubleshoot/

Maybe you are looking for