Add time stamp?

Hi, I'm wondering if there is a feature or a way in FCP to stamp the new time-code on a video I'm creating? (better yet, if i can show frames count instead).

Effects -> Video -> Timecode Generator
You can choose "Frames" from the Format popup.

Similar Messages

Appending and add time stamp at a time........

Hi all,
i am working on a scenario...
it is file based..no mapping and bpm can be used.
I need to pick up file through xi and append it and put in the target with time stamp to it.
we can achieve this if mapping or bpm is allowed.....
But,in file processing we can use only one option at a time.....
I found a way:
scenario one: files will be appened and kept in a temparory folder
using another scenario we will pick up the appeneded file and add time stamp and keep in target structure...
but i dont think this is advisable...
please suggest me any other ways to achieve this...(can run operating system command be helpfull??)
thanks in advance..
Regards,
Kiran.

HI,
Yes you are right, Appending and adding Time Stamp will not be possible simultaneously.
Refer - this could help you
Dynamic Filename with TimeStamp
Dynamic Filename with TimeStamp
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
But some how you have to use mapping for it. Then if its allowed to use the mapping then as you have suggested, should have to go for two scenarios. No alternative,
Probably also you can try with Customized Adapter Module for this.
Thanks
swarup

File adapter- Add time stamp

Dear All,
Scenario:-
File to Proxy and Acknowledgement SAP to File.
Once the file is received by SAP and first ack is send as recepit of file to Legacy system, after that the process goes ahead and do other validation and the same outbound proxy is triggered and send the respeonce.
Now in Ack i am using the same strucutre to send the file receipt and the other response and in file adapter I am differentiatiing the file with Add time stamp option.
Problem:-
My Ack Response from R3 is coming very immidiately. For example Reciept time stamp and other response time stamp is same.
Hence my legacy system is not able to differentiate which is the first flow. Ideally after receipt the other file will be seen by Legacy.
How can I resolve the problem in case when the time stamp for both the flow is same.
I can see Add time stamp option has yyyyMMdd-HHmmss-SSS wat is SSS stands for?
Chirag.

Hi,
My Ack Response from R3 is coming very immidiately. For example Reciept time stamp and other response time stamp is same.
Request / response timestamp can't be same, even if it happens at real time.
I can see Add time stamp option has yyyyMMdd-HHmmss-SSS wat is SSS stands for?
SSS is milliseconds having values between 000-999.
Regards,
Neetesh

Receiver FTP processing parameters should not add time stamp

Hi Gurus,
           I want to write the file at receiver end with the same name as in source directory.. (I dont want the time stamp to be added to my file at receiver side)
         For that i have configured processing parameters as
            1) File Construction mode --- create
            2) checked Overwrite existing file
            3) Put File -
use temporary file
            4) Temporary File Name Scheme --- rec_*.tmp
            5) File type -
binary
But the files are not written in target directory..
How to troubleshoot it...
Thanks and Regards,
govada.

Hi,
open RWB - coomponent monitoring
and then - adapter monitoring or communication channel monitoring
(depending on SP of your XI)
then find your channel and you will see the error - if there is any
BTW
if you don't want the timestamp just don't use:
Add Time Stamp property in the file adapter
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Add time Stamp format in File Adapter

Is it possible to change Add Time Stamp format ??
If so please let me know the procedure to chnage it..
It is scenario with no mapping so i cant go either Dynamic configuration or Variable substitotion.
Thanks & Regards,
Polas

Hi,
I think you need to assign it dynamically as you cannot change the format for Add TimeStamp
See the below links:
File Adapter: Dynamic file name
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Thanks,
Tiny

How do I add time stamp to photo in photoshop?

How do I add time stamp to photo in photoshop? I have saved photos from a camera phone to the computer. They still have the META data on them (aka the date and time from when the picture was taken). How do I put them on there?

The following is old but may still be valid with Yosemite (it addresses how to remove the name but indirectly also how to display it): http://osxdaily.com/2012/01/10/remove-user-name-from-menu-bar-os-x/

Add time stamp array into first column of text file

I am writing daq output to a file by using array to spreadsheet string vi then write that to a file but I would like to add a time stamp array into the first column of the text file. How do I do this?

When you use a DAQmx Read, you have the option of returning a waveform data type. This includes time data. If you were to use this and either Export Waveforms to Spreadsheet File or Write Measurement File, this would included. To stick with the regular Write to Spreadsheet File, you would have to create an array of timestamps yourself based on a start time and the sample rate of the DAQ. Then you would convert this and the data array to strings and use the string array type of Write to Spreadsheet instead of the DBL type.
Message Edited by Dennis Knutson on 09-25-2007 01:12 PM
Attachments:
Write to Spreadsheet - Strings.PNG ‏1 KB

Add time stamp in Final Cut?

In Final Cut is there any way to add a time stamp, like what you get on a consumer camcorder? The customer wants the date and time to show on the final video. The time and date was not recorded when I recorded the event.

In the mean time, to get this project done, it looks like I'm editing 60 tiny titles for my one hour video.
I'm not expert in Motion, but if you already have it, give yourself 5-10 minutes to try and publish the Time Date generator. The basic steps are (I'm doing this from memory so the names of things might be wrong):
1. Sart up Motion and choose a new FCPX Generator template project. Set the project settings that match your own project settings in FCPX.
2. Drag the Time Date Generator into the project.
3. Publish all the parameters you might want to change in FCPXby right clicking on them and selecting publish parameter.
4. Save the project. this will ask you for a name and category, which once saved, automatically appear in FCPX.
5. Drag that one new generator to your project, change the duration to fill your whole timeline, and set the parameters to your starting date/time.

Write mode :Add Time Stamp in J2SE Adapter

Hi All,
We are using J2SE receiver adapter while converting Idoc to File and the file comes in the following format.
<filename>20080310-104448-995.dat
But client wants it in more specific format.
<filename>.D20080310.T104448.P00995.dat
or
<filename>-D20080310-T104448-P00995.dat
I have got no idea on this. So , if any one of you is aware, request you to let me know......
Thanks,
Viji

Hi,
I think you need to assign it dynamically as you cannot change the format for Add TimeStamp
See the below links:
File Adapter: Dynamic file name
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Thanks,
Tiny

Add the time stamp ater file name (suffix)

Hi friends,
i need help for below requierment.
I want to add the time stamp for my file name.
like *filename YYYY-MM-DD-HH-MM-SS.txt*
i don't know how to wirte the UDF for this. please any help me on this.
thanks
Srini..

Hi,
You have to Use Add Time Stamp Option in the Receiver File Adapter--Under File Construction Mode
Check this
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
REgards
Seshagiri
Edited by: N V Seshagiri on Oct 14, 2008 2:02 PM

Mail attachment with time stamp

Hi
My scenario is Proxy to Mail.
On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
How to add time stamp to the attachment in reciever mail adapter.
Regards
Sowmya
Edited by: Sowmya on Aug 28, 2008 12:24 PM

hi sowmya,
The bellow link for MessageTransformBean..
[http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
In that ContentDisposition is used to fill the value for Attachment file name..
Its allows the value accordingly "RFC1806" Note..
RFC1806 allows accordingly RFC822 ..
Check RFC822 ..
5. DATE AND TIME SPECIFICATION
Regards,
Prakasu

File name with Dateand time stamp.

Hi All,
I want to generate a file with a date and time stamp.
For that in File Receiver adaptor i am using option "Add Time Stamp" in File Construction mode. however it is generationg file name as: FileName_20082104_121211_645.txt . In this I don't know what these last three characters "_645" are? And In the File name i only want a file name with datetime stamp . I don't require underscore in between. for eg: FileName_20082104121211.txt (FileName_dateTime.txt)
Can anybody suggest me the way to achive this?
Thanks,
Atul

@FileName_20082104_121211_645
The date time stamp in XI's file adapter will be in that format. This is to avoid over writing of files created simultaneously at the same time. So the last 3 digits is a form of an unique id to distinguish between the same.
In case you want the format as FileName_20082104_121211, use the dynamic configuration and create the file name inside the mapping itself and pass it across.
To get an idea about the same, ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - an usage of the same.
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

Date and time stamp for the file

Hi Experts,
My Requirement is to create a csv file with the name testfile_date&timestamp.
If i select add time stamp in the receiver file communication channel the file be as testfile_yyyymmdd_hhmmss_XXX.
The XXX is message id which comes by default by selecting add timestamp option.
but, i don't want the message id displayed in the file name.As i know from the blogs we can reach this requirement as per Michels blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
I am not clear in the mapping. after writing the udf, to which filed i need to map with that udf.
can you please tell me stel by step how how to do mapping and how to achieve the requirement. request you to send the code forthe udf.
Thanks
Rahul

Hi,
you can wirte udf and map it to root element of the target message type. u just need to execute the udf.
UDF:
// UDF havs one input parameter - timestamp
Code:
DynamicConfiguration conf = (DynamicConfiguration) container .getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String OldFileName = conf.get(key);
String newFileName = "";
if (OldFileName != null) {
newFileName = "testfile_" +timestamp ;
conf.put(key, newFileName);
return newFileName;
Mapping:
Date (standard function) [Formmat yyyyMMdd_hhmmss] -> UDF -> MesageType.
Thanks.
Ritu

Append time stamp as a column in an excel file

Hi
i want to add timestamp to the last column of my excel file
my data is this
columnA columnB column C columnD
temp10     temp11    temp12    timestamp these are header name
74.212 73.122 73.222    11AM:23:59.012
73.444 73.223 74.322    11AM:24:02.083
73.445     73.478     75.555       11AM.24:03.833
and continue
I can use write spreadsheet to have the three numeric tempdata but the last column formatted as time stamp and string
how do I add time stamp to my data and call the spreadsheet write VI to append to the excel file ?
help
Solved!
Go to Solution.

You have at least two possibilities: One is to do the formatting yourself with string functions and write the data as a text file or an array of strings.
Another is to convert the timestamp to a Double and save it as numeric data. This is only useful if your are going to read the data back into LV and analyze it there, because Excel's numeric representation of date and time is different from that used by LV.
Lynn

How do you vary the Date/Time stamp format in File Adapters

In the receiver channel of the File Adapter where you specify the 'File Name Scheme', you do have the option of specifying a 'File Construction Mode' of 'Add Time Stamp'. How can you specify a different Date/Time stamp format ( eg MM/DD/YY vs YYYYMMDD vs MMDDYY, etc. ) without changing the Date/Time stamp for the entire SAP system? Also, can you control where the Date/Time stamp appears in the filename?

Hi,
There are many threads discussing the same issue. Go thro the following:
Dynamic file name (Date) in Receiver File Adapter
Receiver File Adapter - TimeStamp
Bhavesh's reply in above thread:
You can use Adapter Specific Identifiers and then change the file name in the mapping. Append the tiem stamp in the format that you want and so on.
Just use this code in an UDF,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = conf.get(key);
java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
dateformat.format( new java.util.Date() );
String newfilename=SourceFileName+dateformat;
// change to new file name
conf.put(key, newfilename);
return "";
Regards,
P.Venkat

Add time stamp?

Similar Messages

Maybe you are looking for