Add to iPhoto isn't working after upgrade

Hi,
I upgraded to iPhoto 11 and OSX and when I try to add my Apple Mail photos to iPhoto, nothing happens.
Thank you,
Gloria

Go into iPhoto's Preference/Accounts pane and delete the mail account there. Then add it back it making sure you have the server names, password, etc. correct. Then try again. If that doesn't help you can always set the email client to Mail in the iPhoto General Preference pane. If you want a themed email use Mail's stationary.
An added benefit of using the Mail as the client is that you get a record of all emails sent. Using the iPhoto client does not keep a record of emails sent unless you send a BBC copy to yourself with each email.
OT

Similar Messages

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

Downloading new photos - iPhoto doesn't work after upgrading to Yosemite

Hello,
Since I upgraded to Yosemite, iPhoto has stooped working after downloading photos from my Sd card.
Some picutres downloaded are black while some others are ok, but in any case I have to restart my iMac because every apps running can't be used anymore.
That happens only with iPhoto, after downloading, instead normally it works.
Now I use Aperture and everything is fine but I'd like to figure out why iPhoto acts like that.
Do I have to trash it?
Thank you.
Fabrizio

There have been a number of reports on here from folks with Raw issues after updating.
This thread:
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
explains how to delete and reinstall Raw support. It has worked for others.

Iphoto is not working after upgrade to the OSX Mavericks version

seems like i have the 9.2.3 version for Iphoto and it's not working on OSX Mavericks. i've checked the app store, and it didn't show that i should update my iphoto as well. does that mean i have to purchase the new iphoto?

update it to the latest version available (from outside the appstore) then be sure to open it and activate it after that it will be available on the Mac app store as "update"

My custom protocol handler isn't working after upgrading from 3.0

Redhat Enterprise Linux 4
Firefox 3.6.7. Updated via RedHat Network.
I'm trying to add a custom protocol handler (gdc) to Firefox. This worked in 3.0 and earlier. Now I'm getting "Firefox doesn't know how to open this address, because the protocol (gdc) isn't associated with any program." errors.
Tried adding network.protocol-handler.app.gdc string with valid path. Didn't work. Went to #firefox irc.mozilla.org and was recommended that I add network.protocol-handler.expose.gdc and set it to false. I still get the error.

Hi There,
Yep I can confirm that I am having problems with wifi as well.
My problem is that it is not re-joining known networks.
Also the auto login feature designed for hotspots does not seem to work well either. The Log In Screen slides up then an error keeps repeating on the page...."Error Opening Page - The page could not be opened because an error occurred"

Safari Isn't Working After Upgrading to Yosemite

Hi,
Just upgraded my 2010 MacBook Pro to Yosemite. Everything seems to be working except for Safari. It would open fine (just very very very slowly). But when I try to navigate to a web site, any web site, it goes completely unresponsive. I have to force quit it. I deleted my cache. No change. Both of my other web browsers (Chrome and Firefox) work just fine. What's broken and how do I fix it?

Hi ..
Might be a cookies, cache, or extensions, issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache one more time.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that doesn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

IPhoto won't work after upgrading

I just recently upgraded iPhoto and now it won't let me open it. When I try to open it, I get a pop up box saying
"You can't use this version of the application iPhoto with this version of Mac OS X. You have Mac OS X 10.7.4. The application requires Mac OS X 10.7.5 or later"
I had checked on my computer if there were any system updates and I saw none. Please help?
http://screencast.com/t/1LVNbgTr
http://screencast.com/t/9n02T2nWxH

http://support.apple.com/kb/DL1583
or be sure you're logged into the App Store with the correct account.

My iphoto isn t working after i updated to OS mavericks!!!

Hello!!
I just updated my macbook pro from leopard 10.6 to maveriks.
Almost everything seems good, But my Iphoto doesnt open and don`t know what do do.....
Though would be any update so the app could work in this new OS...but i just find a new version pf Iphoto at App store that i have to buy?!?!?!?
Is it the only solution???? Buying a new version of an application that i already had?????
Thanks in advance for any help or suggestion!!1

iPhoto 9.5 is free if you are an iPhoto '11 user. To check this, open a Finder window and select Applications in the sidebar. Then, right-click iPhoto, select Get Info and see the iPhoto version. If it's 9.x.x, you are running iPhoto '11.
If you are running iPhoto '11. switch the Mac OS X language to English in System Preferences > Language & Region, and restart. If not, you have to buy iPhoto '11 in the Mac App Store

Safari isn't working after upgrading to 10 .7.4, any suggestions?

I just reinstalled Mac OSX 10.7.4 and the updates and Safari has crashed every time I try to open it. My email is working and I can connect to the ITunes store...
Any suggestions?
I keep getting the "Safari quit unexpectedly " message but selecting "reopen" doen't do anything ...

Hi:
I have the same problem. Now I cant use Safari any more. So, from my iMac I tranfered Firefox app.
I cant check the Safari version, because Safari doen't opened. I'm so frustrated, could somebody please help me, I would like my Safari back!
Regards from Finland

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

Will i loose all my photos if iPhoto isn't working?

will i loose all my photos if iPhoto isn't working? my computer just got updated by my iPhoto is saying it isn't compatible? will i loose my photos if they were in folders on iPhoto?

my computer just got updated by my iPhoto is saying it isn't compatible? will i loose my photos if they were in folders on iPhoto?
What is your MacOS X version and your current version of iPhoto?
if you just updated to a newer MacOS X version, for example MacOS X 10.9.x, your version of the iPhoto.app may be no longer compatible and you need to update or upgrade iPhoto to a newer version. Check at the App Store if there is an update for iPhoto. If not, post back with the versions you are having installed. You may need to buy an upgrade.
will i loose my photos if they were in folders on iPhoto?
The photos in your iPhoto library are save, even if you have to upgrade to a newer version, but it is always wise to make a backup before updating or upgrading, just in case.

IPhoto is extremely slow after upgrading to OSX Maveric

Has anyone noticed that iPhoto is extremely slow after upgrading to OSX Maverick

I've noticed that it isn't.
There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Headphones controls wont work after upgrading to ios5?

Headphones controls wont work after upgrading to ios5, has anyone solved this problem?

ajkula66 wrote:
Secondly, what is the 7-character model number of your T40 so we can point you to correct wireless drivers..237?-???
Goo00oogle, you forgot the other 3 digits
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Add to iPhoto isn't working after upgrade

Similar Messages

Maybe you are looking for