Add Tracks Button - problem

This one is driving me crazy.
I have over a hundred virtual instrument tracks in my session which I started in Logic 7. Now Once Logic runs out of objects in the environment which I have already created, it insists on adding new rewire objects instead of instrument objects whenever I use the add tracks button or command.
Rewire objects should be a separate selection in the menu apart from instrument tracks, *external midi* and audio tracks!
Every time I add a new instrument track, I have to go to the environment and REASSIGN the added rewire object to be an instrument object! I can't add a VI plug to a rewire object. And unlike Logic 7, you can't change the type of track an object is assigned to in the arrange window; you have to now do it in the environment.
It doesn't matter whether i even create more new instrument objects manuallly in the environment. At this point in my session, Logic still insists on adding rewire objects in the arrange window, and makes these new objects in the environment -- even though I've deleted all rewire objects from my environment, and even though I've manually added another row of instrument objects!
arg!

No one else encountering this issue?

Similar Messages

Weird Problem with Add Row Button in Master Detail Page

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

I have a page that was created with a Master Detail Wizard. When I click the Add Row button on our Production Environment, the row counter increments BUT no blank row shows on the screen.
In our Development Environment, when I click the Add Row button, a blank row appears as expected. Thinking there was some problem with the production app, I exported the Dev version and imported into Production. Still no blank row.
Thinking perhaps it had something to do with the data, I copied our production application data back into the development application tables. Still, the development app creates the blank row where the production version does not.
I even used the same browser window for both environments and still get the same results. This was working fine in production then just stopped one day.
The only clue I have is that the Add Row WILL work if the Master Record has no details or less than a page worth. It seems to happen when the detail records are more than one page worth. Also, when I click the Add Row button, it goes to the last page of the list (say three pages of 10, 10, 6) but no blank row shows up. Again, works fine in the development environment no matter how many pages.
Any ideas or suggestions why this is happening? Could there be some environment setting that is causing this to happen?

Why cant i re-add gmail button on google toolbar? 4.01 is not good, I have never had a problem with your products..Whats going on??

Question
Why cant i re-add gmail button on google toolbar? 4.01 is not good, I have never had a problem with your products..Whats going on??

http://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks

Track add row button in alv

Hello
I would like to track the code of add row button in alv grid. When user cliks add row in avl toolbar what is the code? Is there some PAI module calls in that moment ? I found something about slis_selfield and something like mc_fc_loc_insert_row. I have tried write a code:
data button type ui_func.
button = gr_alvgrid -> mc_fc_loc_insert_row.
After that, in PAI module of screen where alv is, I have tried to read that button. But no results.
Frankly speaking I don't know how to use that all. Can anybody tell me how.
I will be gratefully.

Hi Sri,
I think there is no standard way for this.
Maybe with java script.
Actually the users do not need to save data before they get the additional lines, A refresh is enough.
So maybe you should just define a button calling the refresh command and just name the button different.
regards
Cornelia

I am trying to add tracks which I have on my library on my computer to my ipad. I have done this manually but teh status bar never gets beyond "preparing to update". I have used itunes for years but never had this problem before

I am trying to add tracks which I have on my itunes library on my pc to my ipad. I have done this manually but the status bar never gets beyond "preparing to update". I have used itunes for years but never had this problem before

When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

How to add the Date Track Button

How to add the Date Track Button on a customized Form ?
1. Profile of Datetrack:Enabled = Yes
2. All HR Forms includes the Date Trak Button
3. On the Customized Form "Alter Date Track" can be activated from Menu :Tool --> Alter Date Track.
I'd Like the Button to appear on button ruller.
Thanks for help

Rachel,
Please review the following notes, it may be helpful.
Note: 177733.1 - How Date Track Works
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=177733.1
Note: 169059.1 - Understanding the Flow of Date Track Dates Through the Forms
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169059.1

We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

Problem in add row button in apex3.2

Hi All,
I have a requirement in tabular form in apex3.2 in which when i click the add row button the add row function is working and 1 row is loaded. again when i click the add row button it should load multiple rows according to my number of click. This condition is working in apex 4.1 but not in 3.2.
With Regards
Wildfire;;;

apex 3.2 is different to 4.1, because in 4.1 it adds the rows on the fly without submitting the page.
But in 3.2 it submits the page and adds the new row, when submitting the page it adds any newly entered row into database and adds a blank row.
But in your scenario you are adding a blank row and not populating the values and clicking the add row to get another blank row, Which will try to post the existing blank row into database and adds new row(so you loose the first blank row)
I guess there was an option in (button or process) 3.2 to specify the number of blank rows you want.
Thanks

Advance Table: Problem on add another button

Hello All,
I have designed page that contains advance table and add another button. The table displays maximum 10 records in a page.
First I click the button and enter the records. After that again I click the button for multiple records insert. Than the previous record goes to another page. In this case users are unable to see the previous record. In my question how can we prevent that one?
Please help me…
Thanks in advance…
-- Subhas

It is a Standard behaviour that table will show the records which are set in the max number of records displayed property.
However if you want that records shudn't get shifted each time you press the add another row button you can set the max number of records programatically and increment 1 to it.
This way the number of records displayed will be now 11.
like each time you press add another row redirect the page, grab the table bean and then
bean.setmaxnumberofrecords()
increment the original value by 1 and then set.
Thanks,
Gaurav Sharma

Add Row Button Not Working

I've read the threads and done numerous searches. Not sure why the add row button isn't working, other buttons work.
Here's what I've found and done.
Print button subform - positioned (have tried flowed, too) allow page breaks
Table: body rows vary   -    Insert wrap in subform - subform flowed - allow page breaks
     row 1 binding - repeat row for each data item - min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)
Form properties - preview in dynamic PDF, interactive   -   PDF render format dynamic xml, run in 9.0 or later (to remove errors)
Insert Row Button in Subform Row 1 Cell 1 (not counting header row) on click, JavaScript run at client tried table.row1.instancemanager.addinstance(1);   also tried full path
saved as dynamic pdf
My hierarchy looks like:
form1   [autofit]
     master pages
          page 1
               untitled content area
     printbuttonSubForm [flowed, top to bottom, allow page breaks]
          untitled subform [flowed, top to bottom, allow page breaks]
               printbutton1
          tablesf    [flowed, top to bottom, allow page breaks]
               table1    [allow page breaks]
                    headerRow
                         cell1
                         cell2 etc
                    Row1   [allow page breaks, repeat row for each data item, min 1, max 25 (why won't it keep an initial count when I try putting in 1 or 0?)]
                         subform   [allow page breaks, repeat row for each data item, min 1, max 25
                                        (why won't it keep an initial count when I try putting in 1 or 0?)]
                              button1    table1.row1.subform1.instanceManager.addinstance(1);
                         cell2, etc
     Referenced objects
Questions:
I click the Add Row button, but nothing happens, why? The print button works.
Found a reference to def instances of same row, what does that mean?
Is my hierarchy correct?
How to set Form1 to flow? Object says mixed objects with no options
Many thanks for your assistance! Leslie

Hi Leslie,
There could be a few things.
First check that the form is saved as Dynamic XML in the save as dialog. If it is saved as Static the add instance will not work.
Make sure that the object you are targetting is set to repeat in the Object > Binding tab
Check your syntax in the script editor (button above the editor). Some of your post is not camel case. For example addInstance and instanceManager. Note the capital letter for the second word.
If you could share your form it would be easier to track down what the problem is. You can use Acrobat.com or YouSendIt.com or some other file sharing site. Just remember to post the published URL.
Good luck,
Niall

Right-click add track to playlist doesn't do anything

About 90% of the time (iTunes 12) trying to add tracks to existing playlists via right-click doesn't do anything. No error message, but the track just doesn't get added. I think this mostly happens when adding multiple tracks at once, not sure. Clicking on the little circle and adding to playlist that way, on the other hand, seems to work for the one track but ignores all the other tracks you have selected and only adds that one track.
Is this a known bug? Does it only happen to me?
I have to resort to always selecting all the tracks I want to add, then choose 'create new playlist from selection'. This always works. Then I have to copy (drag-and-drop) the entries from that new playlist to the playlist I actually wanted the tracks in, and then delete the new unnecessary playlist. It's an unnecessary amount of work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Having an issue of not being able to add tracks to a project. It worked fine before, now nothing.

Having an issue with not being able to add tracks in Garage Band projects. Tried adding from both the TRACKS menu up top, and the "+" button at the bottom of the project page. It used to work fine, now all of a sudden nothing.

What is your GarageBAnd version?
How many tracks do have already? There is a limit to the number of software instruments that you can add, depending on the amount of RAM you have installed.
Tried adding from both the TRACKS menu up top, and the "+" button at the bottom of the project page. It used to work fine, now all of a sudden nothing.
Are the buttons greyed out, or simply unresponsive?
If the buttons and commands are unresponsive, I'd try HangTime's oddball problems fix and trash the GarageBand preferences file - move com.apple.garageband.plist from the Preferences folder in your user library to the Desktop - see the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
Regards
Léonie

Can I add Action button on each page of my pdf document

I have created many power point slides with an action button on each slide that allows the user to click to display a video clip.   I would like to create a pdf document of this and replace each of my action button in ppt with an action button that works in Acrobat.
I noticed that action buttons can be added to forms, but I want to be able to add an Action Button on each of my ppt slides to start playing a video clip (each slide will have a different video).
I would like to do this using any coding method (i.e. Javascript, VBA, C , etc).   I think acrobat uses Javascript.
The reason, is that I want to display my power point slides on an IPad and they don't support hyperlink in power point.   I believe IPad does suppport the full acrobat capabilities.
Can this be done ??
Any suggestions where to start ??
Thank You,
G

NO problem creating the buttons and then playing this back in Acrobat. Works great.
However, unfortunately, none of the PDF viewers for the iPad support playing movies.   So playing it there won't work :(.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Sat, 28 Jan 2012 11:00:47 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Can I add Action button on each page of my pdf document
Can I add Action button on each page of my pdf document
created by gw70115<http://forums.adobe.com/people/gw70115> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4171109#4171109

How to add a button with Javascript to Library

Hi
I am using Captivate 5.5 to create a template.
In the files which will be created using this template, we will be adding a button which executes a Javascript. Now, my question is, since this button will be used on multiple slides in the file, can I add this button (with the Javascript) to the library? Currently, we create it manually everytime.
We don't have a programmer in our team, so we can't create widget. Is there an alternative way?
Thanks for your help.
Sreekanth

Thanks for that reply.
I now have a blank slide with the button (including the javascript) on it which solves the problem of importing it manually.
However, when we use this template to import PowerPoint presentations, when we publish the file, the first slide (the one on which I have this button) will be blank and has to be manually deleted.
Is there a way to eliminate this manual work? I tried hiding and using some actions. But it was not of any use.

I'm trying to add my Linux netbook to my sync account but both my windows computers will not show the "Add Device" button in any of the sync management screens

I'm trying a new Linux build on a net book that I use for playing with non windows OS. In the process of setting up the fresh OS install I wanted in get my Firefox account set up to that I didn't have to spend lots of time working on that one thing. I'm no stranger to the browser sync and have attached several of my computers and tablets with a number of different OS to the account with little trouble including the Firefox of the previous Linux build that was on the net book. The problem now is that on both of my to main computers, a windows 7 desktop and a windows 8.1 tablet, both running the latest Firefox, I am unable to find the "add device" button in any of the sync management screens. This includes the browsers built in options screen as well as the Firefox manage account page. The first gives me options for disconnecting the account, going to the manage screen, several check boxes for what can be synced, and the device name. The manage screen, after logging in, only give me options for signing out, changing password, and deleting the account. Any help figuring out why the add device button seem to be missing from both these devices would be greatly appreciated.

Please check your Firefox Installation's version. (can be found by clicking the main menu, either clicking or hovering over the help button, and then clicking about firefox in the sub menu). depending on how long ago you set up sync you may still be using the older sync version. firefox 29 introduced a new (and might i add far less tedious) sync version. see [[How to update to the new Firefox Sync|this Mozilla support article]] for information on upgrading your sync to the new version.

Add Tracks Button - problem

Similar Messages

Maybe you are looking for