Add transition on multiple layers?

I created a multiple effect involving 4 layers of PIP.
I want to use a transition effect between this segment and the next.
How do I apply?
Would I make a "subclip"? (I have never done this)
Thanks

Drag the filter onto the nest.
Now you need to access the filter controls:
Instead of double clicking to send it to the Viewer, like you would for a regular clip, drag the nest to the Viewer. When you adjust the blur value it will be applied to all the nest content.

Similar Messages

  • Any way to add transitions to multiple slides??

    I just completed a 200 slide presentation which I imported into the iPad. At the time, I was not worried about slide transitions. I thought that once on the iPad, I could like on the mac, select a group of slides and add the same transition to all at once. I just tried on the iPad and it only added to one slide at a time!! Ugh!!
    I had to make numerous changes to the slides once they hit the ipad for formatting, fonts, and so on so it's not practical to tweak on the mac then send back to the iPad.
    Is there any way to add a transition to multiple slides at once on the iPad?
    Thanks

    Thanks, David, for your reply; the slides are all just basic dissolve transitions. nothing fancier, and dissolve is supported in both the transition and the build areas of keynote for ipad according to the help doc, which I had read, so this is why I am confused. I did originally create the document in keynote '08, but opened and saved it in '09, and then selected the slides, set dissolve as transition, and saved as a test file. It's an '09 file now, and some slides dissolve, others don't although they were all selected to dissolve. I've used Keynote for years on my mac so I know I set up the dissolve correctly. just not sure why only some of them are working and others not in the ipad file. I'm going to create one from 'scratch' using Keynote '09 and see if that makes a difference.

  • Add Transition to multiple audio tracks

    Is there a way to add an audio fade to multiple tracks at the same time?

    In FCP7 select them and press Cmd-Opt-T for the default audio cross fade.

  • No Transitions on Multiple Tracks

    I have been a Sony Vegas user for 2 years now and I just got FCPX. When I try to add a video transition to video it snaps to the audio acting like there's no video. It's extremely frustrating! I have tried re-installing it and creating a new user account. I was on the phone with 3 apple support people today. The best result I got was I had to attach the audio to the video, combine the tracks, split it where the next clip starts, and then add the transition. I'm having a hard time believing a professional editing system can't add transitions on multiple tracks, but a $90 editing system on a PC can.
    If you have any suggestion please say them. Thank you!

    EnglishBarrelRacer wrote:
    I'm having a hard time believing a professional editing system can't add transitions on multiple tracks, but a $90 editing system on a PC can.
    If you're talking about adding transitions to clips above the main storyline, these are connected clips (not tracks) you need to select the relevant clips, right-click the selection and make those clips into a storyline (Cmd + G). You can then add your transitions.
    Andy

  • How do i add one transitions to multiple photos in iMovie 11

    how do i add one transition to multiple photos (400 photos) in iMovie 11?
    I have other transitions in the movie that are various lengths.
    Do I have to do it one at a time? (x 400)

    Welcome to the forum.
    However, this is the Photoshop>General Discussions forum, and does not cover either Elements program, Premiere Elements, or Photoshop Elements, or their Elements Organizer.
    If you can please let us know exactly which of the Elements program you are using (either Premiere Elements, or Photoshop Elements, through the Elements Organizer), a MOD can Move your post to the appropriate forum, where you will get quick answers.
    Also, additional music can be Imported into several of the Elements programs, but knowing exactly which you are using, will dictate the instructions.
    Good luck, and please let us know more.
    Hunt

  • Custom keyboard shortcuts and editing multiple layers in Flash CS4

    Hi, all -
    CS3 -> CS4 transition newb here who's getting increasingly frustrated with the new motion tweens; however, for this project, I'm working in a 3D space and require using them, so I'm dealing with this bit by painful bit. I found the tip about Split Motion, but first question: how do you apply Split Motion across several layers at the same time? I have six different tweens, and in CS3, I used to be able to shift-click or click-drag across frames and apply a command to all of them (for example, hit F5 to add frames), but Split Motion is requiring me to right-click on each and every layer. This is really laborious, and I worry about future animations that might be more complex.
    Similarly, I tend to add custom keyboard shortcuts to each of my Flash versions for commands I use frequently and don't want to right-click a menu for (such as "add motion tween") - however, I can't seem to find where to create a custom shortcut for either that, or Split Motion.
    Any and all help would be appreciated as I muddle through this. Honestly, guys, I WANT to like the new version and there's so many added features, but it's hampering my workflow so bad I want to pummel it with sticks.

    Hey there,
    I definitely hear you about Split Motion. There is an enhancement request for supporting multiple layers, and adding it as a keyboard shortcut. The first one is tricky, but the second one is not. I think there was hope that splitting motions wouldn't be necessary much (especially since you have to be careful when doing so when eases are involved), which is why the eventual need for more functionality related to split motion was realized a bit late in the schedule.
    Now regarding other operations, such as you mentioned F5 to insert frames - that and other operations (inserting certain types of property keyframes, F6, and so on) work just fine.
    You can apply a shortcut to Create Motion Tween in the custom keyboard shortcut dialog.  Not all operations in the program are available though (most context menu items aren't), which is why unfortunately why we don't see Split Motion yet.
    It might be possible to avoid Split Motion though with another workflow. What are you using the feature for?  Just curious in case I can help.
    Jen.

  • Photoshop CC 14.1 editing paths on multiple layers disabled?

    Has editing paths on multiple layers with the direct selection tool been disabled in Photoshop CC 14.1? I can't seem to figure out how to do it now, shift- or command-clicking doesn't do anything. In fact, I can't even click to select individual paths on different layers, something that Photoshop has had forever.
    While it was at times problematic the way it was in 14.0 (always selecting multiple layers and having to go into isolation mode to edit just one), there were times when it was useful to edit multiple layers, or even just click between layers with the direct selection tool.
    I've seen this documentation on the site, but I'm not sure it's very helpful. Can someone give me some assistance?
    Also, what is the custom keyboard shortcut for entering/exiting isolation mode? It is mentioned in the above image, but what actually is it?

    You can still work with paths the way you could in 14.0 -- just choose the All Layers mode in the Path Selection tool or Direct Selection tool options bar. We added the Active Layers mode for users who prefer to isolate which paths can be selected based on which layers they have already selected in the Layers panel.
    To clarify:
    -Active Layers mode: Clicking or dragging on the canvas with the vector selection tools will not affect which layers are selected in the Layers panel. Double-click to enter isolation mode is disabled.
    -All Layers mode: Works just like in 14.0 -- clicking or dragging on the canvas with the vector selection tools can change which layers are selected in the Layers panel. Double-click to enter isolation mode is enabled.
    If you find yourself switching between these two modes a lot, you can add a custom keyboard shortcut that will toggle which mode is selected. In the Keyboard Shortcuts dialog, choose Shortcuts For: Tools and scroll down to the Direct Selection Mode Toggle option. Add your new keyboard shortcut here.
    As for your question about isolation mode keyboard shortcuts, this just means that you can assign a custom keyboard shortcut to this command as well (Select > Isolate Layers).

  • How do you copy a selected area of multiple layers?

    I'm trying to create an animated gif using PS and I can't find out how to copy multiple layers. Right now I have 110 different layers and I want to select the same portion of every layer and copy it into a new file without flattening the image. So I want to be able to start, and end with, 110 layers. The 110 different layers are all separate pictures of my desktop and I want to crop out most of the desktop to focus on one area in particular. Is there anyway to do this?

    One could delete, select next layer, delete, select next layer … which should be Action-able.
    Or duplicate the image and crop it to the intended size.
    Or why not simply put the Layers into a Group and add a Layer Mask to that?

  • How do I apply one same transition to multiple slides in one go?

    How do I apply one same transition to multiple slides in one go?

    After you have done either of the previous options to get the transition on the current slides, you can add the transition to the Master Slide so all your new slides will default to the same transition.

  • Dragging To Select Multiple Layers In Document Window?

    I've looked this up but can't seem to make it work.  I want to select the 6 or 7 layers that make up a picture in my file.  I'm working with a file someone else created so there are dozens of layers, which makes it hard to select just a few from the Layers Pallete.
    Is there an easy way to select all the constituent layers of a particular item on the document window?  I've tried ho0lding Shift down while trying to select all the layers, but that isn't effective because the layers are on top of eachother.  Is there no way I can drag my mouse and have Photoshop select every layer that is complete inside the dragged area?
    Thanks.
    Ken

    Ken, Marek's response is correct with regard to selecting, (read: targeting), layers in the Layers Panel.This is good if you need to apply a transformation to the contents of multiple layers simultaneously, use alignment/distribution features on those layers, or merge them.
    Your description of what you're attempting, however, suggests you want to select the pixels residing on particular layers. The way you're doing it isn't the way it works. What you want can be done, but not in the image window. In the Layers Panel, Ctrl+Click on the layer thumbnail of the first layer you want selected, (you should see the actuated selection in the form of 'marching ants' surrounding the layer's non-transparent pixels...in the image), then add the Shift key and Shift+Ctrl+Click on the layer thumbnail of each of the additional layers to subsequently add their non-transparent pixels to the selection.
    Note that all you're doing here is making a selection, as opposed to selecting the contents of multiple layers. Such a selection can only target a single layer, and any pixel-altering operation you apply with this selection active will only affect one layer...not all those that may have contributed to the additive selection-building process described.

  • Forms fields on multiple layers

    Hi, I wonder if someone can give me an answer on this one or point me to a resource for this.
    I have an interactive brochure for a conference with muliple buttons that turn layer visabilities on and off (There is a button for displaying each day's schedule for the conference etc.)
    I want include a simple registration form and I want the form to be on a layer so that it can appear when a specific button (which sets the layer visability) is pressed.  Obviously if it can work on one layer, why not multiple forms on multiple layers, hence the title of the post.:)
    Can this be done in Acrobat?  I have searched and tried it and have not met with success.  btw yes - I know I could just add an extra page with a button pointing to that page, but I was wondering if there was a more elegant solution:)
    Any help, direction etc. would be greatly appreciated.
    Grahame Dryden

    Hi,
    Since my layer visibility is triggered by buttons, I would add it to the action for the button.  Just select Javascript from the choices and code it that way. 
    I created the form in InDesign so one way would be to create the text fields there and try the forms wizard in Acrobat to see if it will recognize the fields.  Alternatively you can just add the fields in Acrobat after the export from InDesign.  Then set their visibility to invisible when the pdf is opened and toggle them based on the button pressed.
    I don't have the specific Javascript since I didn't end up needing it, and I am not a javascript expert.  However I am sure there are plenty of examples out there for this.
    Grahame

  • Selecting multiple layers and merge

    is it possible to select multiple layers (with layermask) and merge them?
    tell application "Adobe Photoshop CS6"
        tell current document
            set current layer to every layer of layer set "bloem 1-9" of layer set "Bloem"
            tell current layer
                merge
            end tell
        end tell
    end tell

    Yes, for that you have to select the layers that are in the set. Here is one way using javascript
    function selectLayerBelow( add ){
        var desc = new ActionDescriptor();
            var ref = new ActionReference();
            ref.putEnumerated( charIDToTypeID( "Lyr " ), charIDToTypeID( "Ordn" ), charIDToTypeID( "Bckw" ) );
        desc.putReference( charIDToTypeID( "null" ), ref );
        if(add!=undefined && add = true )desc.putEnumerated( stringIDToTypeID('selectionModifier'), stringIDToTypeID('selectionModifierType'), stringIDToTypeID('addToSelectionContinuous') );
        desc.putBoolean( charIDToTypeID( "MkVs" ), false );
        executeAction( charIDToTypeID( "slct" ), desc, DialogModes.NO );
    // assumes a layerSet the the activeLayer and doesn't work correctly if there are nested layerSets
    var numberOfLayersInSet = app.activeDocument.activeLayer.layers.length;
    selectLayerBelow();
    for(var layerIndex = 1;layerIndex<numberOfLayersInSet;layerIndex++){
        selectLayerBelow( true );
    app.activeDocument.activeLayer.merge();

  • Script for Linking multiple layers to a null layer

    I'm trying to link multiple layers to an animated null layer but I want each layer to start the animation from layer starting time.
    What would be the script I need to add instead duplicating null layer for every layers?
    I hope that question isn't too confusing to understand lol
    TIA
    W

    Sorry, I'm not good at explaining things though texts lol
    Hopefully this picture can explain better what I'm trying to achieve.
    I want to link the text layers to ROTATE null object but I want the keyframes to start at the beginning of each of text layer. This way, I won't need keyframes for each text layer and I can adjust the timing easier later. I know the script lines to link them to a null object but I can't figure out the line to tell the keyframes to start at the beginning of the layer instead the null object in the timeline.
    I think I just made this more confusing lol

  • MULTIPLE place image import...& "save as.." multiple layers to multipage PDF

    Hello,
    just some suggestions I`d like to see to speed up my set up and output..
    i`d like to import multiple placed images into illustrator CS4. So open dialogue box place, and multiple select images for placing.
    regards output save as...
    Can we output multiple layers  into a single PDF in illustrator?  Or multiple layers into single JPEGS  from illustrator with one command instead of individually saving out  each layer... would be a huge time saver for me.I create different artworks on different layers..
    Currently  I output each completed layer individually and then right click those  outputted jpegs in their output folder and choose "combine supported  files into acrobat..." to make a single acrobat file..i`d like to do this right in the illustrator "save for PDF" dialogue box. Adding  something in the Save for PDF output dialogue box to save layers to one PDF as multiple pages would be a helpful time saver..
    I`d  also like to be able to CTRL click multiple layers and go " save as..."  only those layers get saved out... 

    , bridge -FILE/PLACE into ai, goes to separate layers in AI as placed.
    in PS, bridge/tools/ps/load files into ps layers.. CS4.
    just using right click in explorer on individual PDF docs from layers saved from PS to combine to PDF. but cannot output multiple pds from layers in AI in CS4.

  • How to multiple layers in the MAP web item?

    Hi experts,
    I'm working on a demo with BWGIS. I encounter several problems with the MAP web item.
    My demo:
    QA results visualized on global (region object - e.g. Europe, Asia), country (country object) and plant level. Use geo-drilldown to navigate into the lower layers functionality to get from the global view to the countries within one region and plants within one country.
    My settings:
    Region is a static geo-characteristic. For region I used the cont200.shp file. Also country is a static geo-characteristic, here I used cntry200.shp. For test I used ARCGIS to draw (points) some example plants in the country shape file. I uploaded this shape file to the plant object (also static).
    My success:
    I'm able to display the QA results in a separate global or country view within the 3.x Web template.
    My problems:
    A) The map web item in 7.0 does not display any data: it looks like no link can be made between the query result and graphic although we installed the latest IGS.
    B) I'm not able to drilldown from a global view to the countries within one region (doubleclick on one region in global view) within the 3.x Analyzer and 3.x Web template.
    My first question is about the concept of BWGIS:
    1) I want to use geo-drilldown (double-click) to navigate to the lower layers. For example in the global view I see only the QA result per region (shape file of region object) -> doubleclick on Europe, I expect to zoom in to Europe and see the QA results for all the countries in Europe (shape file of country object). How do I modell this in the web application designer?
    alt. 1a: 1 map – 1 layer - 1 dataprovider - underneath 1 query with region and country in the row is not allowed, so how to navigate between the two geo-relevant objects?
    alt. 1b: 1 map - 2 layers (2 shape files) - 2 dataproviders - 2 queries, one with QA result per region and one per country -> in that case both will be displayed at the same time, is not what I want. How to navigate between the two layers?
    alt. other ?
    2) I know how to make maps with multiple layers in ARCGIS, but do I need this for BWGIS, because one layer is one shape file? So do multiple layers in the map web item correspond to multiple layers in a ESRI ArcMap Document.
    More specific questions:
    3) Is there a lot of experience with the map web item in 7.0, documentation and working examples? Are there known problems (I can't find anything in sap notes). Is it better to still use the 3.5 Web Application Designer for this?
    4) There is very little information on SAP help, SDN and other forums about BEx Map and moreover the MAP web item. Does anyone have more documentation for me?
    Thanks in advance.
    With kind regards,
    Rick Stoll

    Hi Rick,
    I am working on the same topic. I am strongly interessted in solutions to your open questions, that you pulled forward in the past.
    Did you make any progress?
    Thanks in advance and regards
    Marcus

Maybe you are looking for