Add two more hosts and 2 clusters to a Sun cluster

How do I add 2 more hosts, each with 2 zones, to an existing Sun cluster environment?

This is explained in the documentation:
[http://docs.sun.com/app/docs/doc/820-4679/cacjggea?l=en&a=view|http://docs.sun.com/app/docs/doc/820-4679/cacjggea?l=en&a=view]
Regards
Thorsten

Similar Messages

  • I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages and I need to!  Please help!!  "Add page" is not working!!!

    I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages past that and I need to!  Please help!!  "Add page" is not working!!!

    Fixed it thanks to similar questions and answers to them.  Thanks all!

  • Does oracle clusterware and oracle RAC require sun cluster

    Hi,
    I have to setup oracle RAC on solaris 10 SPARC. so is it necessary to install sun cluster 3.2, QFS file system on solaris
    I have 2 sun sparc servers with solaris 10 installed on it and shared LUN setup(SAN disk RAID 5 partitions)
    Have to have 2 node setup for RAC load balancing.
    Regards
    Prakash

    Hi Prakash,
    very interesting point:
    As per oracle clusterware documents the cluster manager support is only for windows and linux.
    In case of solaris SPARC will the cluster manager get configured ???
    The term "Cluster Manager" refers to a "cluster manager" that Oracle used in 9i times and this one was indeed only available on Linux / Windows.
    Therefore, let me, please, ask you something: Which version of Oracle RAC do you plan to use?
    Because for 9i RAC, you would need Sun or Veritas Cluster on Solaris. The answers given here that Sun Cluster would not be required assume 10g RAC or higher.
    Now, you might see other dependencies which can be resolved by Sun Cluster. I cannot comment on those.
    For the RAW setup: having RAW disks (not raw logical volumes) will be fine without Veritas and ASM on top.
    Hope that helps. Thanks,
    Markus

  • Startup and Shutdown HAOracle on Sun Cluster 3.0

    How can I safely shut down Oracle8i on the running Sun Cluster 3.0?
    Best regards, Tomislav

    Once you have the tds-rg offline, try using scsetup to update the state of the VxVM disk groups, then try switching just the disk group back and forward. Once that works, try bring the RG online.
    Tim
    ---

  • I am creating a book and had 27 pages done manually off of an album, am trying to add 7 more pages and cannot add more pages

    I am creating a book and had 27 pages done manually off of an album , I wanted to add more pages but when I try to add a page nothing happens.

    Select the book in the left hand sourcd pane and type Command +D (duplicate).  Then do as Keith suggested to turn it into two separate books, i.e one with  1-50 pages and one with 1-57 to get all of the pages included in two about equal books.
    The will have to be ordered separately with separate shipping charges.
    OT

  • Web App and Virtual Host and Clustering

              Hi,
              How are you doing?
              What is the best way to deploy a web application using a virtual host on a clustered
              environment?
              Here is what we are doing:
              o Deploy the web application on the virtual host
              o Deploy the virtual host on the cluster
              o Make the web appliation, the default application on the virtual host
              This seems to work, but I have additional questions?
              In the above deployment, looking at the deploy tab for the web application shows
              that the application is deployed to both the cluster as well as the virtual host.
              Even though we didn't explicitly deploy to the cluster! What happens if we deploy
              explicity (i.e., target) the web application to the cluster?
              What other approaches / configurations are you guys using?
              Thank you so much,
              -Bart Simpson
              

    Never mind, I think I have a solution. Even though e-docs say that DefaultWebApp attribute at virtual host level was deprecated as of WL 8.1 (inline with Servlet 2.3 specification) one can directly edit config.xml file and add the attribute.
    For instance, here is an example to set webapp APP1 as a default webapp for virtual host vhAPP1:
    <VirtualHost
    Name="vhAPP1"
    DefaultWebApp="APP1"
    ... />

  • Need recommendation - iis with two physical servers and clusters

    Hello,
    I was hoping to get a recommendation/opinion or two on the configuration I've inherited. I'm looking
    at the following configuration using weblogic 8.1 sp4 server (to be upgraded to sp6) running on two physical machines:
    MachineA:
    Domain: myDomain
    Cluster: cluster1
    Servers: Admin Server:9001 (not part of cluster)
    ManagedServer1:7001
    ManagedServer2:7010
    MachineB:
    Domain: myDomain
    Cluster: cluster2
    Servers: Admin Server:9001 (not part of cluster)
    ManagedServer3:7001
    ManagedServer4:7010
    On MachineA: IIS Proxy Plugin with parameter in .ini file
    WeblogicCluster: MachineA:7001, MachineA:7010, MachineB:7001,MachineB7010
    Naturally, the IIS is acting as a round robin load balancer..
    The domains were created using the wizard on both machines and basic domain template..
    For proper failover to be taken advantage of, does something different need to be configured? Or is it fine?
    And if so, does group replication have something to do with it?
    Should either of the clusters be Managed Servers across physical machines?
    or should this just be one cluster of 4 managed servers across two machines?
    I really am not sure on any of this, even though i've read through much of the documentation for clustering..twice.
    I should mention that there is only a .war file deployed with 4 connection pools and 4 Data Sources..No EJBs or JMS
    Would really appreciate any feedback or opinions/advice..
    Thanks

    This is what I'd do
    MachineA:
    Domain: myDomain
    Cluster: cluster1
    Servers: Admin Server:9001 (not part of cluster)
    ManagedServer1:7010
    ManagedServer2:7020
    MachineB:
    Domain: myDomain
    Cluster: cluster2
    Servers: Admin Server:9001 (not part of cluster)
    ManagedServer3:8010
    ManagedServer4:8020
    I just changed the port numbers so they flow and have a pattern - 70* port numbers belong to cluster 1, 80* port numbers belong to cluster 2. No technical benefit apart from it makes it tidier in my opinion.
    Port 9001 for the admin server is normally the domain wide admin port - you could be using that, so that's fine, but my admin server is running 7001.
    You also only need one admin server per domain, this can run on MachineA
    Replication groups are used to help WLS figure out where to place the secondary http session. It will try servers on a different machine/replication group first, if none available, it will create secondary on the same machine.
    What you will end up with is a domain with 4 managed servers in it. The admin server will run on machineA, say using port 7001, each of the managed servers will contact the admin server to download it's config.
    The cluster1 will contain 2 managed servers and the same for cluster2.
    providing you have your cluster multicast addresses set up and the cluster is working, that should be all you need to do for the session failover.
    There's some BEA sample code somewhere which will deploy a web-app and show which managed server you've attached to. If you find that and then connect through IIS, shut down the server that the JSP tells you, you should be able to see the session fail-over nicely.
    Hope that helps,
    Pete

  • If i add two officially released and named albums with the same name, they keep compiling as one album. How to separate the tracks by artist??

    I need immediate help. So here's the situation: Okay so I added an RHCP (Red Hot Chili Peppers) album that is named Greatest Hits on my iPod and I also added an The Offspring album also named Greatest Hits to my iPod and both tracks of the albums group as one. Any help please? Please please reply asap thanks in advance

    This is a known bug, and you will see it in iTunes if you sort your library by Album name.
    The workaround is as Mitch indicated, change one of the album names. However, you can simply append a space at the end of one of the albums so that it "looks" the same as the other, but will be treated differently because of the space.

  • Creation of Z reports for client adding two more column that is Purcahse order and delivery dates with Internal order wise

    HI Experts,
    Can any one help me to add two more column for standard report that is purchase order and delivery dates for Internal order wise.
    But here problem is when i checked with ABAP team they said there is no standard functional module to add two column.
    Please note below :
    Selection criteria is: 1) controlling area
                                  2) Fiscal Year
                                  3) From date and To date
                                  4) Plan Version
                                  5) Order Group.
    My client suggested : S_ALR_87012993 this tcode to run, but we suggested with S_ALR_87013019 as in this tcode we can get all the details
    That is required output fields, as it is showing all details but on yearly basis, he wants this to be period wise and also Abap team is not able to find standard functional module in the second tcode as well.
    Out Put fields to Pop up
    1) Orders.
    2) Budget
    3) Actual
    4) commitment
    5) Alloted
    6) Available
    These are two additional column
    7)Purchase order
    8) Delivery date.
    Require your help to know which all tables are included to extract above out put fields please help me.
    Thanks in Advance.
    Regards,
    Sudesh

    Hi Preeti,
    Thanks for reply, can you please let me know is there any other way to show the output fields.
    As my client is very specific to run the report on period wise, i also tried to execute the standard tcode S_ALR_87013019 and were we are getting all the required outputs to pop up but this is on year wise, but we can also check by period basis by clicking on order number and actual period basis where we can see period basis.
    Also one more question,what is the commitment table which is popping up in this, please advise.
    Thanks in advance.
    Regards,
    Sudesh

  • How to add one more field to an exist internal table

    hi abapers
    i am a very new abap programmer and just started learning it.
    i want to know How to add one more field to an exist internal table.
    lemme me put my question in a very simple way.
    i have a internal table having fields f1,f2,f3 and which also that internal also contains some data.
    now i want to add two more fields (mm & nn) to that internal table now.
    how can i do that.
    and i wanna know the websites names where i can find some brain teasing questions in abap programming.
    eagerly waiting for ur reply
    regards,
    Maqsood A Khan

    Hi, MAQSOOD.
    You can insert more fields in your internal table like this.
    refer this code snippet.
    DATA : BEGIN OF tbl_itab OCCURS 0.
            INCLUDE STRUCTURE zsdtc009.
    DATA :  vkorg   LIKE vbak-vkorg,  "inserted one
            vtweg   LIKE vbak-vtweg,  "inserted one
            vkbur   LIKE vbak-vkbur,  "inserted one
            vkgrp   LIKE vbak-vkgrp,  "inserted one
           END OF tbl_itab.
    you can also read the book "Teach yourself abap in 21 days"
    at http://cma.zdnet.com/book/abap/
    but that book is just about basic concept of abap and report program.
    it doesn't give a lecture for on-line program.
    you can get pdf version books(about abap, sap...things) from sap.
    http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
    I wish I could help you.
    Regards
    Kyung Woo.

  • Adding two more Star Trails in movie clip

    Hi All,
    I bought a flash file the other day which i plan to modify and use for an intro to a project i am working on. Currently there is one instance of a Star which follows a path and emits "sparkles" while tracing the path. I would like to add two more stars/ paths. I tried modifying some of the code, and am working through it, but wanted to know if anyone could help me out a bit.
    thanks!
    Patrick
    import flash.filters.*;
    //--------------variables to change--------------------------//
    //modify the size of the sparkles
    var maxSparkSize:Number = 25;
    var minSparkSize:Number = 8;
    //set the speed the sparkles fade, 0 is never fade,the higher number quicker the fade
    var fadeSpeed:Number = 1//5;
    //speed which the sparkles fall, 0 is no fall, the higher the number the quicker the fall
    var fallSpeed:Number = 0.5;
    //the speed which the particles drift sideways. 0 gives no drift, positive numbers give right drift
    // negative numbers give left drift
    var windSpeed:Number = 0;
    //change the colour
    var randomColour:Boolean = true;
    defaultColour = 0xFFcc00;
    // the path to the followe_mc
    path = this.holder_mc.follower_mc;
    path = this.holder2_mc.follower2_mc;
    //you do not need to modify the code below here...
    var sparkle:Number = 0;
    var mousePosX:Number;
    var mousePosY:Number;
    var whichBat:Number;
    var count:Number = 0;
    this.createEmptyMovieClip("empty",this.getNextHighestDepth());
    //make the shape on top of the sparkles
    path.shape_mc.swapDepths(1000);
    startSparkles();
    function startSparkles() {
                this.onEnterFrame = function() {
                            var pathX:Number = path._x;
                            var pathY:Number = path._y;
                            xPos = randRange(pathX-2, pathX+2);
                            yPos = randRange(pathY-2, pathY+2);
                            createSparkle(xPos,yPos);
    function createSparkle(xPos, yPos) {
                movingSparkle = this.attachMovie("colouredSparkle", "s_"+sparkle, sparkle+10);
                movingSparkle2 = this.attachMovie("colouredSparkle", "ss_"+sparkle, sparkle+101);
                sparkle++;
                            if(sparkle>100){
                            sparkle = 0;
                setParams(movingSparkle);
                setParams(movingSparkle2);
    function setParams(movingSparkle){
                //position the sparkle
                movingSparkle._x = xPos;
                movingSparkle._y = yPos;
                //set initial size
                movingSparkle._xscale = movingSparkle._yscale=Math.random()*maxSparkSize+minSparkSize;
                movingSparkle._rotation = randRange(0, 360);
                if (randomColour == true) {
                            col = Math.round(Math.random()*0xFFFFFF);
                } else {
                            col = defaultColour;
                colouredFill = new Color(movingSparkle.colour_mc);
                colouredFill.setRGB(col);
                colouredFill = new Color(movingSparkle.white_mc);
                colouredFill.setRGB(col);
                moveSparkle(movingSparkle);
    function moveSparkle(movingSparkle) {
                var rot = randRange(-15, 15);
                var blurX = randRange(1, 5);
                var blurY = blurX;
                var blurFilter = new BlurFilter(blurX, blurY, 3);
                //add some blur to the sparkle to make it softer
                movingSparkle.white_mc.filters = [blurFilter];
                //calculate the amount the sparkle will fade
                var alphaDrop = randRange(1, fadeSpeed);
                //commit the movements...
                //this onEnterFrame moves the spark, rotates it, scales it and fades it.
                movingSparkle.onEnterFrame = function() {
                            //change speed
                            this._y += fallSpeed;
                            this._x += windSpeed;
                            //change rotation
                            this._rotation = this._rotation+rot;
                            //make it smaller
                            this._xscale = this._yscale=this._xscale*0.98;
                            //fade the sparkle
                            this._alpha = this._alpha-alphaDrop;
                            //remove the movieclip if it get tiny
                            if (this._alpha<10) {
                                        this.removeMovieClip();
                            if (this._height<4) {
                                        this.removeMovieClip();
    function setColour(mc, col) {
                colourIt = new Color(mc);
                colourIt.setRGB(col);
    function randRange(min:Number, max:Number):Number {
                var randomNum:Number = (Math.random()*(max-min))+min;
                return randomNum;

    1 ) Increase the FrameRate (or)
    2 ) Call the createSparkle(xPos,yPos); function more than once with new randRange

  • Virtual hosts and rewrite rule

    I've got Oracle portal with several virtual hosts setup.
    <VirtualHost *:7778>
    ServerName hosta
    Port 80
    ServerAdmin [email protected]
    RewriteEngine On
    RewriteOptions inherit
    OssoIpCheck off
    ErrorLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/hosta_error_log 43200"
    CustomLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/hosta_access_log 43200" common
    RewriteRule ^/$ /portal/page/portal/bmi/hosta/$1 [PT,L]
    </VirtualHost>
    <VirtualHost *:7778>
    ServerName hostb
    Port 80
    ServerAdmin [email protected]
    RewriteEngine On
    RewriteOptions inherit
    OssoIpCheck off
    ErrorLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/www.jafabu.co.uk_error_log 43200"
    CustomLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/www.jafabu.co.uk_access_log 43200" common
    RewriteRule ^/?$ /portal/page/portal/pdg/hostb/$1 [PT,L]
    </VirtualHost>
    This doesn't match any of the pages I have in the two pagegrooups - "HostA" and "HostB".
    If I try RewriteRule ^/(..*)$ /portal/page/portal/pdg/hostb/$1 [PT,L], then Portal reports back about there being a problem and promptly dies.
    How do I allow http://hosta/ being a different hpome page to http://hostb/ and allow any pages to be referenced without Portal crashing ??? I dont want to add a new rewrite page for avery page my developers add in....
    Thanks
    Kev

    You cannot use your virtual hostnames as a page or procedure name. Instead, please try this:
    <VirtualHost *:8001>
    ServerName hosta.yourdomain.com
    # Redirect if on desired VirtualHost:
    RewriteEngine on
    RewriteCond %{HTTP_HOST} !^hosta\.yourdomain\.com \[NC,OR\]
    RewriteCond %{HTTP_HOST} ^yourdomain\.com \[NC\]
    RewriteRule ^/(.*) http://hosta.yourdomain.com/portal/page/portal/ \[R\]
    </VirtualHost>
    <VirtualHost *:8001>
    ServerName hostb.yourdomain.com
    # Redirect if on desired VirtualHost:
    RewriteEngine on
    RewriteCond %{HTTP_HOST} !^hosta\.yourdomain\.com \[NC,OR\]
    RewriteCond %{HTTP_HOST} ^yourdomain\.com \[NC\]
    RewriteRule ^/(.*) http://hostb.yourdomain.com/portal/page/portal/ \[R\]
    </VirtualHost>
    hope that helps!
    AMN

  • Adding two more hard drives

    I have a G4 1.42 dual that has two hard drives in the front of the machine already. I've just discovered (ok, so I'm a little slow) that I can add two more hard drives in the back of it. As I added larger capacity drives to the front (250 gig each), I took the original 120's and put them in external cases and just used them as USB drives.
    However, I'd like to internalize those two drives now.
    I was able to somehow figure it out then, regarding adding a second internal drive (slave/master) and it didn't seem to hard. I'm figuring this is a similar deal, just knowing how to set some kind of jumpers or whatever.
    Truth is, though, I'm not for certain how this would work. I'm guessing that I can "chain" in the remaining two HD's as slaves? I took the two externals out of their temporary case and can see the jumper sets, the power cable, and so forth.
    What do I need to understand before I just "plug" them into the computer's remaining two bays and fire it up? Any jumper settings? Power limitations?
    Is there some kind of setting I have to activate in OS X to make sure it can 'see' them or whatever?
    I've just looked over the ribbon cables. I notice there is one slot marked ATA-33 that has a ribbon cable coming from it, sliding kind of underneath and around, appearing to go to the DVD burner. I'm guessing that would be the typical config (without me having to unscrew and chase down the ribbon)?
    Sitting just on top of that, is two obvious power plugs plus one unused ribbon cable. The ribbon is sitting, unconnected, with one blue end (to motherboard I would presume) and then two dark grey connectors on the other end of the ribbon cable. Looks like they built it ready to hold more drives.
    On the motherboard, just above the ATA 33 slot is an ATA 66 unused slot. Would the HD's that I want to connect simply use the cable to go into 66 slot using the supplied ribbon cables, or would I need to somehow chain them into the 33 slot?
    Thanks
    Thanks
    Message was edited by: TexasMan_Luvs_Hismac
    Message was edited by: TexasMan_Luvs_Hismac

    Hi-
    Easy stuff...
    Put the two drives in the second carrier, both jumpered Cable Select.
    Connect the power to each, and using the ribbon with two free connectors, connect both drives, and then plug that into the ATA/66 connector on the motherboard.
    The machine should recognize both disks. In the event that they don't show, initially, check your work, and then reset the PRAM, holding CommandOption+PR while booting, release after the second startup chime.

  • Addition of two more column in Operation overview of inspeciton plan

    Dear Experts,
    I want to add two more additional column in operation overview of Inspeciton plan.
    Please suggest & how it has to be achieved.
    Thanks in advance.

    Did you try the user-defined fields? If no..
    1) Define user fields at configuration
    SPRO > Quality Management > Quality Planning > Inspection Planning > Operation > Define User Fields
    2) Input the user field key in operation then the user fields will be activated
    Regards
    Luke

  • I cant add two byte variable

    I want to add two byte variable and store result in a byte variable but there is an error. Pls clarify me.

    And the error is? The first error is
    A.java:1: 'class' or 'interface' expected
    Class AAnd since I believe that that is caused by the OP hurriedly retyping code rather than pasting his real code I am not wanting to waste time guessing what the real problem is.

Maybe you are looking for