Add URL to a button

Alright I know this is gonna seem ridiculous, but I've done it a few times and something always goes buggar.. so using a button already made from a template the code is this:
onClipEvent (load) {
     num = 5;
     link_num = _root.getMenuSystemOrder(num-1);
on (rollOver) {
     if (_root.link<>link_num) {
          this.gotoAndPlay("s1");
on (releaseOutside, rollOut) {
     if (_root.link<>link_num) {
          this.gotoAndPlay("s2");
on (release) {
     if (_root.link<>link_num and _root.animation == 1) {
          _root.animation = 0;
          _root.link_prev = _root.link;
          if (_root.link != _root.pagesReadMoreFrame) {
               _parent["item"+_root.getMenuPreviousLink(_root.link)].gotoAndPlay("s2");
          _root.link = link_num;
          _root.play();
I want to make this button instead of a link to a page inside of the flash, I want it to be a link to an outside URL. Ex: google.com. (While Keeping the animations and such) I dont understand all the root.link<> and pagesReadMore etc. BTW I want the page to load in the browser, NOT inside the flash / frame.
Thanks in advance!
Edit: This template also uses an outside source of a XML file. would it be possible to change the link in the XML for ease / future changes, or does it need to be done in the flash script? This is the XML script: (Shortened)
<link systemOrder="5"><![CDATA[
<font face="standard 07_56">CONTACTS</font>
]]></link>
-- Continued further down in XML: --
<page name="CONTACTS">
<texts>
<pageText><![CDATA[
]]></pageText>
</texts>
</page>
Message was edited by: SalvationD

Alright my bad, basically I just want a button to take me to the forum part of my website, no new browser loaded. Just the button takes me to a URL instead of the code listed (which is an embedded page inside of the flash). I don't know where to put in the getURL or whatever is needed.
Currently when I click button 5 it takes me to a mini flash page, which is listed in the code I posted. Instead I want the button to take me to a custom URL example: http://www.*****.com/forum

Similar Messages

How to add a google+ share button to a composition?

I am working on a little app for which I want to add share buttons.
I don't have problems adding Facebook share and Twitter buttons, However I cannot find a way to add a Google+ share button.
For FB I create a rectangle and name it fbBtn. Then on click I add the foolowing code:
FB.ui({
          method: 'feed',
          name: 'Win designer fashion jewelry from Baloka',
          link: ' http://www.mysite.com/',
          picture: 'http://www.mysite.com/external-xfbml/share-image.gif',
          caption: 'Win designer fashion jewelry from Baloka',
          description: 'Baloka is giving away 22 designer fashion jewelry by Maria Mizrahi. Check this out. Do you want to win? You could...',
          message: ''
For Twitter I create a rectangle and name it twitterBTN. Then I add this code to document.compositionReady:
var twitter = sym.$("twitterBTN");
var c = '<a href="https://twitter.com/share" class="twitter-share-button" data-url="http://baloka.com/content/socialApp/fb.html" data-text="Win cool trendy designer fashion jewelry - check this out" data-via="BalokaDesign" data-count="none" data-hashtags="BalokaSweepstakes">Tweet</a><script>!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id =id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(docu ment,"script","twitter-wjs");</script>';
twitter.html(c);
For Google + I found two ways to add a share button:
First:
Adding this snipped to the html document (not in EA):
div class="edgeLoad-EDGE-467457915"><a href="https://plus.google.com/share?url={http:baloka.com}" onclick="javascript:window.open(this.href,
'', 'menubar=no,toolbar=no,resizable=yes,scrollbars=yes,height=600,width=600');return false;"><img
src="https://www.gstatic.com/images/icons/gplus-16.png" alt="Share on Google+"/></a></div>
and adding this to the head:

    <meta itemprop="name" content="Baloka Sweepstakes">
    <meta itemprop="description" content="Win designer fashion jewelry by Maria Mizrahi - Baloka.
    There are 22 prizes including earrings, bracelets, necklaces and a couple of $100 gift certificates.
    Please share with your friends.">
    <meta itemprop="image" content="http://cdn2.bigcommerce.com/server2100/a154e/products/102/images/243/LittleTotemEarrings__ 55527.1355162788.1280.1280.jpg">
This works as expected, but I am having a hard time position the button in the right place on my page. I can see the button in EA, but the position I set it in there is not maintained once the file is published.
Thus, I would like to know how to include the code directly in EA as I am doing with the Twitter and facebook buttons.
Second:
Adding this to the html document (not in EA):
<div id="gplus1" data-action="share" data-annotation="bubble" class="edgeLoad-EDGE-467457915"></div>

<script type="text/javascript">
      (function() {
                var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true;
                po.src = 'https://apis.google.com/js/plusone.js';
                var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s);
</script>
Again, this works, although with this code I don't know how to customize the name, description and image for the info I am sharing.
In this case I was able to include the code on EA adding the following to document.compositionReady:
var googleplus = sym.$('googleplus');
var click = "javascript:window.open(this.href,'', 'menubar=no,toolbar=no,resizable=yes,scrollbars=yes,height=600,width=600');";
var g = '<a href="https://plus.google.com/share?url={http://baloka.com/content/socialApp/fb.html}" onclick="click";return false;"><img src="https://www.gstatic.com/images/icons/gplus-16.png" alt="Share on Google+"/></a>';
googleplus.html(g);
The problem here is that instead of opening a window, it replaces the page with the one supposed to be on a different window, which I don't like.
So, in short, I need some help figuring out how to include the code directly in EA for the first method for Google+.

I don't have an answer for you, but I do have a question. You said the FB code works. What did you do? What did you put in your html page? I tried the FB code above and it gives me an ID error. Appreciate it if you can elaborate more. I just posted the ff in the forum "Customizing FB Share in Edge Animate"
Thank you!

How do I add a functional "submit button" to a pdf form in Adobe Acrobat Pro XI ? I created the pdf form in Adobe Forms Central.

How do I add a functional "submit button" to a pdf form in Adobe Acrobat Pro XI ? I created the pdf form in Adobe Forms Central. It's for an online Diet Questionnaire. After people complete the form I'd like them to click "SUBMIT" and the completed form will be emailed to me.

This can be a bit confusing because Acrobat 11 comes with the desktop app that allows you to create simple PDF forms without having a FormsCentral account. Some people find this helpful, but you need to understand that when you generate the PDF form, it is Reader-enabled by Acrobat. In order to edit the form further in Acrobat, you have to create a non-enabled copy of the form. You do this in Acrobat by opening the form and selecting: File > Save a Copy
and opening the copy. It is not opened automatically.
You can now add a button and set it up to submit by email, either using a "Submit a form" action or the submitForm JavaScript method. You can set it up to include just the form data or the entire PDF, and will want to use a mailto type URL. Submitting the form to the FormsCentral server has a number of important advantages over email (much more reliable, more secure, etc.), so you might want to consider it.
If the form needs to be saved with Reader versions prior to 11, then you will need to Reader-enable the document. In Acrobat 11 you do this by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools

How to add custom link or button to task details page to open a different t

Dear All
In HumanTasks Workflow, On task details page, I want to add a custom link or button. Clicking on this link or button, should load a different task details page.
The exact business usecase is like this:
1. We have some human tasks with very detailed payload like about 100 attributes. When the task is submitted for Approval, we send notification emails. These emails shows the Task Details with all these 100 attributes along with standard Approve, Reject buttons etc. NOW in addition to this, we want to add extra custom button/link like Custom View. When we click on this buton or link, it should replace the task details page with the Custom task details page contents. The reason is most of the managers/approvers access their emails on smart phones like iphones. So in these phones, seeing full task details (100 attributes) is very tedious. So we want to provide a simplified view of same task with very minimum attributes like about 10 with Approve, Reject buttons. Now this compact view details will have a button called Detailed View on click on which it loads details page.
So we want to have 2 pages for a task:
taskDetails1.jspx -> Has all 100 attributes with a custom button/link called "Compact View". Click on Compact View switch to below page.
taskCompact1.jspx -> Has only 10 attributes with a custom button/link called "Detailed View". Click on Detailed View switch to above page.
1. I tried implementing this using the VacationRequest sample where the payload is like creator, startdate, enddate, reason. I already have taskDetails1.jspx page, which shows this information in the email body.
2. I want to add another button to taskDetails1.jspx so that when I click on it, I want to load a different page like taskCompact.jspx which has only say creator, reason.
I already added a link and gave the url with parameters like taskId, taskContext etc which I got from bindings, but nothing is displayed when I click on custom button. The taskId, context values are comming correctly in the url.
So bottom line, what is the URL that I can provide in the task details page, to load a different task details page contents. I want to pass other taskdetails jsp details.
Please let me know, if there is any other approach to implement this usecase.
Thanks in advance
Ravi Jegga

Hi,
I am not sure if you can add your own custom buttons to the application tool bar because your table control is in a sub screen area in a standard screen so the menu area would be controlled by the standard screen and not the subscreen , but along side the table control you can give buttons for scrolling and handle the same in the subscreen if you check the FM EXIT_SAPLMEREQ_002 it has a variable IM_UCOMM which would have the ucomm set in the subscreen so here you can handle your user command to scroll on the table control.
Regards,
Himanshu

How to add URL Icon for each responsibility

Hi all,
I have a requirement where i need to add URL Icon to my custom application, i,e when i click on responsibity it will open the application so to make user to know he is in this application we need to add ICON to URL. This is possible in normal HTML just we need to include these two lines in head tab.
<link rel="icon" type="image/ico" href="favicon.ico"></link>
<link rel="shortcut icon" href="favicon.ico"></link>
How can we achieve the same in the OAF?
Thanks
Babu

Hi Josephine
Please proceed as below:
1. SE51.
2. Change the layout.
3. Add 2 pushbuttons at your desired location.
4. Double click on each button for Attributes.
5. In the attributes, give the Name, Text.
6. Select the Icon Name from the list: Eg: ICON_OKAY and ICON_CANCEL.
7. Go back to layout.
8. Save & Activate
9. Now you can test the screen to check the icons displayed in the screen.
Hope this helps.
Kind Regards
Eswar

Cisco 69xx missed calls as service URL at feature button

Hi,
can anybody help me to use "Missed Calls" as a service URL (Standard IP phone service) at a Cisco 6941 at a feature button.
As discussed in this thread it should work -> https://supportforums.cisco.com/thread/1003641
I just copied the phone service "Missed Calls" and changed "directory" to "Standard-IP-phoneservice".
The service URL I don`t changed and it`s still "Application:Cisco/MissedCalls".
When I try to use this copied phone service at a Cisco 6941 as a URL I always get back a XML-error.
Is the service URL "Application:Cisco/MissedCalls" still correct when I try to use Missed calls as a Standard IP phoneservice?
The load at the Cisco 6941 is SIP 9.3.3.2.
I also tried with SCCP instead of SIP but still the same error.
BR
Michael

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

How do you add a Facebook like button to an iBooks Author page?

How can I add a Facebook Like Button to an iBooks Author page?
I've got my book ready to go.
I've got a facebook account to promote it.
I just want to add a "Like" button on the iBooks page.
regards
iRevDr Bill Wall

Hi KT,
That was helpful, but I'm still having problems.
I've plonked a Facebook logo on the page.
BUT I can't seem to give it a hyperlink to my Facebook page.
When I select the logo and then use the tool bars or the box thingy. It won't allow me to paste in the URL.
It looks a bit ugly having a Facebook logo and the text of the URL beside it.
Is there a way of making the Facebook logo have a hyperlink to its URL so you just click on the logo and it takes you to the facebook page.
regards
iRevDr

Why am I getting this error? How do I add confirm message to button press?

Using Java Studio Creator.
I do not understand why I am getting the following page error:
Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
Exception Details: java.lang.IndexOutOfBoundsException
Index: 0, Size: 0
Possible Source of Error:
Class Name: java.util.ArrayList
File Name: ArrayList.java
Method Name: RangeCheck
Line Number: 546
======================================================================
I have a page that works.
It has a button that is created in the session bean code with the following java:
button = (HtmlCommandButton)application.createComponent(HtmlCommandButton.COMPONENT_TYPE);
button.setActionListener( application.createMethodBinding("#{ScheduleEditSessionBean.mainApply}", new Class[]{ActionEvent.class} ));
button.setId( "applyUndates" );
button.setType( "submit" );
button.setTitle( "Apply updates.");
button.setValue( "Apply" );
button.setStyle(style);
children.add(button);
When the button is pushed, it calls the following session bean method:
public void mainApply(ActionEvent actionEvent)
updateScheduleData();
scheduleAdjustFlag = 1;
dataApplied = true;
dataSaved = false;
addControls();
This all works just fine - no errors
====================================================================
I wanted to add confirmation to the button press, so I removed the action listener for this button and added
a javascript function call for the onclick method
button = (HtmlCommandButton)application.createComponent(HtmlCommandButton.COMPONENT_TYPE);
style = "text-align: center; font-family: 'Arial','Helvetica',sans-serif; " + font + " height: 22px; width: 115px";
// Commented out this line button.setActionListener( application.createMethodBinding("#{ScheduleEditSessionBean.mainApply}", new Class[]{ActionEvent.class} ));
button.setOnclick("confirmApply()"); // Added this line.
button.setId( "applyUndates" );
button.setType( "submit" );
button.setTitle( "Apply updates.");
button.setValue( "Apply" );
button.setStyle(style);
children.add(button);
I added a dummy button to the page that has the following call to execute the mainApply method in the sessioon bean.
The button action just calls the mainApply() method in the session bean
public String mainApplyBtn_action() {
seb.mainApply();
return null;
Added the javascript to the page that simply pushes the dummy button if confirmed.
function confirmApply()
if( confirm( 'Are you sure you want to Apply these changes?' ) )
form1["form1:mainApplyBtn"].click();
The session bean method looks like this it is the same method as before, but without the action event argument.
public void mainApply()
lsb.logMsg( "<ScheduleEditBean.mainApply> Main apply pushed" );
updateScheduleData();
scheduleAdjustFlag = 1;
dataApplied = true;
dataSaved = false;
addControls();
==================================================================================
Now, when I push the original 'Apply' button, I get the confirmation box just like I expected.
But when I confirm the question, I get the error at the top of this post.
If I push the 'dummy button' directly, I do not get the error.
I do not understand why I should be gettng this error.
Can anyone give me a clue as to why this change would cause the problem?
The error is related to an ArrayList.
I use several of these on the page, but they should be filled with data in the preRender method of the page.
Can anyone suggest a way that I can add confirmation to a button that is created under program control?
Thanks

Make use of the fact that when an onclick event of a button returns 'false', the action will not be taken.
Pseudocode:<h:commandButton value="submit" action="#{myBean.action}" onclick="return confirm('Are you sure?');" />

How do I add a close window button/image

All I want to do: Add a close window button (round/square with an "x" through it) to either one or many html files. I don't see how to do this.
Using RoboHelp 8 HTML and WinXP. Thanks.

Ahh I see now. You are asking where to obtain such an image!
The RoboHelp Gallery doesn't contain one. Sorry. You will need to obtain one from any number of other locations.
You might look at the following link for one possibility.
Icon Archive
Here are a couple from my own colloection. You might right-click and save as.
There are also a number of packages you may purchase or find. Perhaps the following link will help.
Click here to search Google
I cannot advise on the legal implications of using said images.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

OK since midday today firefox 3.6.24 apparently no longer executes javascript on ebay. Can't use the "add to watch list" buttons or the enlarge photo buttons. It says 'javascript at the bottom of the firefox window but nothing happens.

just as I wrote above.. ebay loads and functions. I can bid and view auctions but trying to either use the "add to watch list" or "add to wish list" buttons or to switch between different posted photos of an item just gives me javascript:; at the bottom left of my screen but clicking the button has no effect.I'm still running 10.4.11 with the last java download.. is this an ebay change to a newer java version not supported by my os or is it a firefox error..oh and one more thing each page seems to have become 4 times longer..ie there is a huge empty space as I scroll down the page before I hit the bottom.Only appears to do this on ebay..haven't found any other sites showing similar errors and everything works fine on my imac running firefox 4 under 10.5

Craig Stenton: at 12:13:04
but I can't install windows! During the install I am asked for the product key and it tells me that it is not valid and so I can't proceed.
Craig Stenton: at 12:14:16
I can't use the usual methods of activation because I cannot get an activation code. I can't use the activation wizard. I can't call the number because it requires an activation code.
Hi,
I'm a bit confused with this paragraph, as you said Vista already install on your computer, why did you say Windows can't be installed?
According to your description with your problem, it is Product edition and key are not match. Firstly of all, we must make sure the system you installed on your computer was
Windows Vista Business, not matter 32 or 64 bit.
Note: you can check current system edtion at System Properties.
After that, you can try to input your product key and activate your system for test.
If problem still presists, it would be better to provide the activation error message.
Roger Lu
TechNet Community Support

How to add url in iCal

Hello,
I am doing programming cocoa application.I add task in iCal.But i want to add url in task from code.I try task.url= @"gjgjh" but it is not done.
Thank you...

You're probably better off posting your question on Apple's developers list.

Assigning a URL link to button in a Flash Player

I've designed a player in Flash using Action Script 3. I've
built a rollover button into the player that users will click to
link to a new page. But where do I assign the URL for that button
to link to; there's no apparent field for this in the properties
inspector.
I was able to make it work by switching over to Action
Script 2 and assigning a "Go to Web Page" behavior to the button;
but I can only do this in Action Script 2 (where behaviors are
available), and I have to keep the page in Action Script 3 in order
to support other components (Slideshow Pro).
Surely there is a way to assign a simple URL link to a
button in Action Script 3. Thanks for the help,
Chris

yes, you need to write AS3 script in order to do so:
[code]
buttonInstanceName.addEventListener(MouseEvent.CLICK, navTo);
function navTo(e:MouseEvent) {
var url = new URLRequest('
http://www.theaddresshere.com);
navigateToURL(url);
[/code]
place this on the first frame where you button is
instantiated, in a layer you name 'actions' - with the frame
selected, open the Actions panel (F9) and enter the script there.
replace the "buttonInstanceName" with the instance name of the
button on the stage you're assigning this method to, and of course
replace the address in the URLRequest parameter.

How do I add a submit form button to my form?

I am creating a form in FormsCentral. How do I add an email submit button, as an object, to the form?

Hi,
Please refer to the following forum thread:
http://forums.adobe.com/message/5797460
Regards,
Brian

How do i add a facebook share button to my webpage

how do i add a facebook share button to my webpage

I use a Facebook logo and then encourage people to like the page. But I do have a couple of clients who have asked me to do this.
Here's the link on Facebook's site for share buttons:
https://developers.facebook.com/docs/plugins/share-button/

Can the "ADD-A-NEW-TAB" button be reconfigured to be adjacent to existing tabs (like it used to be)? I am a left-handed tablet user who finds it's position on the far right side of screen very inconvenient.

In previous version of Firefox, the "add-a-new-tab" button has been located to the right of any existing tabs. In the latest version it's been moved to the far right of the screen. In tablet mode, this is too far to reach conveniently for a left-hander. I cannot find any controls to re-configure it to the way it used to be and I can't "drag" it to where I want it. Is there a way to relocate it?

Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

Add URL to a button

Similar Messages

Maybe you are looking for