Add user-defined menu to GUI toolbar

Hello,
I need to integrate an input field in the GUI toolbar (the bar where the transaction input field, save button etc. reside). Does someone have experience with this and knows how to do this? Especially I am looking for the dynpro element where to modify the standard GUI layout.
Thanks in advance.
Greetings,
Daniel

Hello Gregor,
I have to admit that I have never seen such an embedded field in the GUI toolbar. The question comes up from a customer who wants to include another input field in the toolbar, so every hint is welcome.
Greetings and thanks,
Daniel

Similar Messages

How to add user defined functions in Menu bar of a Selection Screen?

Hi,
Can anybody please suggest me that how can I add user defined functions in the menu bar of a Selection Screen?
Regards
s@k

Dear Amit,
I am referring to the standard SAP program: RIEQUI20.
On the initial screen, there are 3 tabs.
Code:
SELECTION-SCREEN BEGIN OF TABBED BLOCK tab FOR 25 LINES.
SELECTION-SCREEN TAB (20) tab1 USER-COMMAND ucomm1
 DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (20) tab2 USER-COMMAND ucomm2
 DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (20) tab3 USER-COMMAND ucomm2
 DEFAULT SCREEN 003.
SELECTION-SCREEN END OF BLOCK tab.
AT SELECTION-SCREEN.
CLEAR gv_okcode.
gv_okcode = sy-ucomm.
CLEAR sy-ucomm.
CASE gv_okcode.
 WHEN 'IH08'.
 CALL TRANSACTION 'IH08'. "Equipment Selection
 WHEN 'IW29'.
 CALL TRANSACTION 'IW29'. "Notification Selection
 WHEN 'IW39'.
 CALL TRANSACTION 'IW39'. "Order List Selection
 WHEN OTHERS.
ENDCASE.
* Check date:
IF NOT datuv IS INITIAL
AND NOT datub IS INITIAL.
 IF datub >= datuv.
 ELSE.
 MESSAGE e884(ih) WITH datuv datub.
 ENDIF.
ENDIF.
IF variant IS INITIAL AND
 dy_vari IS INITIAL.
 PERFORM get_default_variant_f14 USING variant.
ENDIF.
PERFORM variant_existence_f14 USING variant.
IF datuv IS INITIAL.
 datuv = sy-datum.
ENDIF.
IF datub IS INITIAL.
 datub = sy-datum.
ENDIF.
IF sy-ucomm = 'ADDR'.
 PERFORM adress_sel_f01 USING 'EQUIR'.
ENDIF.
PERFORM check_parnr_f76.
* AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
STATICS: l_slset TYPE sy-slset.
*--- Set initial variant
PERFORM variant_init_f14 USING 'INST' 'INST' 'INST' 'RIEQUI20'.
IF variant IS INITIAL AND
 dy_vari IS INITIAL AND
 gv_variant_flag IS INITIAL.
 PERFORM get_default_variant_f14 USING variant.
 gv_variant_flag = 'X'.
ENDIF.
*--- Set Icon for adress-button
PERFORM set_icon_f01 USING dy_adrfl ad_icon text-ad0 text-ad1.
*--- get classification data from select option
*--- (if new variant or if called via submit or F3)
IF ( l_slset NE sy-slset ) OR
 ( s_comw[] IS NOT INITIAL AND gt_clsd_comw[] IS INITIAL ).
 l_slset = sy-slset.
 gv_class_old = dy_class.
 gv_klart_old = dy_klart.
 PERFORM copy_selopt_comw_f79 TABLES gt_clsd_comw s_comw.
 PERFORM class_search_init_f77 USING 'EQUI'.
ENDIF.
*--- set Icon for classification
LOOP AT gt_clsd_comw TRANSPORTING NO FIELDS
 WHERE atcod > '0'.
 EXIT.
ENDLOOP.
IF sy-subrc IS INITIAL.
 gv_comw_flag = 'X'.
ELSE.
 CLEAR gv_comw_flag.
ENDIF.
PERFORM set_icon_f01 USING gv_comw_flag cl_icon text-cl0 text-cl1.
CALL METHOD cl_uid_cust=>selection_screen_output.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR variant.
PERFORM variant_inputhelp_f14 USING variant 'RIEQUI20'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR dy_parnr.
PERFORM f4_for_parnr_f76.
AT SELECTION-SCREEN ON BLOCK clse.
IF dy_class NE gv_class_old
 OR dy_klart NE gv_klart_old.
 gv_class_old = dy_class.
 gv_klart_old = dy_klart.
 CLEAR gv_comw_flag.
 REFRESH gt_clsd_comw.
 REFRESH s_comw.
ENDIF.
PERFORM class_exist_f77 USING dy_klart dy_class 'DY_CLASS'.
IF sy-ucomm = 'COMW'.
 CALL FUNCTION 'IHCLSD_VALUATION_POPUP'
 EXPORTING
 i_klart = dy_klart
 i_class = dy_class
 i_language = sy-langu
 i_key_date = sy-datum
 i_also_subclasses = dy_subcl
 TABLES
 ct_comw = gt_clsd_comw
 EXCEPTIONS
 exc_no_class = 1
 exc_klart_not_allowed = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
*--- fill classification data in select option
 PERFORM copy_comw_selopt_f79 TABLES gt_clsd_comw s_comw.
ENDIF.
IF sy-ucomm = 'ONLI'.
 sscrfields-ucomm = sy-ucomm.
ENDIF.
Regards
s@k
Edited by: siemens.a.k on Jan 15, 2010 10:10 AM

How can we add user defined fields in My Account Profile?

Hi,
When adding new field for user,user groups,my resource,organizations and request all exist in the drop down menu list but the MyAccount(In the page where we add user defined fields).
Please help me to add user defined field in MyAccount also.
Thanks in advance.

Hi,
As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
Regards
Nitesh

User Exit to add user-defined selection critieria onto VL10G

Does anyone know how to add user-defined selection criteria onto VL10G - Sales and purchase order display screen? OSS note 524424 states the userexit to transfer user-defined selection criteria from the selection screen to the report but no information on how to add the selection criteria on the screen. Is that something can be done through configuration or user-exit?
Any advice or sample is greatly appreciated.

I was in a hurry, I forgot to add, the user role specific selection screen assignment to VL10G is done at "delivery scenario" level
The delivery scenarios that are predefined in the system can be found under Logistics Execution -> Outbound Process -> Goods Issue for Outbound Delivery -> Outbound Delivery -> Create -> Collective Processing of Documents for Shipment.
You can make the following settings in a delivery scenario:
Selection screen
You can use the selection screen parameters to define the appearance of the selection screen used to select the delivery list.
There are three combinations of selection parameters available that each include a different number of tabs.
A long selection screen with no tabs
A selection screen with three tabs
A selection screen with six tabs
The selection criteria is the same on all three screens in the standard system, it is simply arranged differently.
This parameter also triggers scheduling of the report for processing the delivery list, with the same three available tab options.
Customer enhancements are also possible in the LV50R_PREFZ1 program, which should be triggered from a delivery scenario.
User role
In the standard system, a predefined user role is assigned to each delivery scenario. If necessary, you can copy these user roles into your own user roles, make changes as required, and then assign them to a delivery scenario of your choice.
If the user role assignment for a delivery scenario is changed in Customizing, the new settings are valid for all users that carry out this delivery scenario.

How to add user defined tab in the Header level of T-Code O4NM?

How to add user defined tab in the Header level of T-Code O4NM?
I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..

Can you check the user exits,
OIJNOM_N and OIJTKT_N
Cheers,
Balaji

Can I Add User Defined Tab Dialog From just like kTextFrameOptionsDialogBoss?

Can I Add User Defined Tab Dialog At Build-In kTabSelectableDialogBoss, just like kTextFrameOptionsDialogBoss?
If it is possible, How?
Pls Help Me...

Impliment IUnitOfMeasure with custom units.

1.5.5 Cannot add user defined report to folder

Hello,
the context menu on folders in user defined report show only two options: copy and export. No way to add new folders or reports. I migrated my settings from 1.5.1.
Though I can add a new folder directly at the root of user defined reports. But then SQL Developer won't restart (using 100% of my dual core until I kill the process).
Running WIN XP JDK 1.6.10
Regards
Marcus

Hello Sue,
I already tried the current production version 2.1.0.63.73 and the problem is still there.
In addition I did yet another test without migrating the old reports, connections etc. by renaming the appropriate folder in C:\Documents and Settings\michael\Application Data.
Afterwards I imported my own reports.
However there was no chance to move or delete any sub folders containing my reports. I only could copy or export sub folders or delete single reports.
And after restarting sqldev the same behavior occurred on the new folders just created: Only export and copy are available accessing the context menu.
Any suggestions? Do I have to re-create every single report?
Regards,
Peter
Edited by: petmichael on Jan 15, 2010 12:27 PM
Today I found out that changing the language settings for sqldev to English by adding the appropriate settings in sqldeveloper.conf located in \...\sqldeveloper-2.1.0.63.73\sqldeveloper\bin (mentioned below) does solve the problem.
AddVMOption -Duser.language=en
AddVMOption -Duser.country=US
AddVMOption -Duser.region=US
AddVMOption -Dfile.encoding=GBK
By deleting these additional settings the error is reproducible.
In addition with the English language settings the "Tip of the Day" appears running version 2.1.0.63.73 first time and it doesn't work that way without the additional settings mentioned above.
Hth everybody running in that feature!

How to add user defined F4 help for s LDB field?

Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
Mahesh

Hi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

Add User Defined Field (Landed Costs Window)

Hello All!
Somebody can help us on this, we wonder if someone can tell us how can we add a user defined field in the Landed Costs Windows -> Fixed Costs TAB place.
We were unable to add this field, and now we're thinking that's impossible through the USER DEFINE FIELD function, there's not reference about Fixed Costs TAB in this tool, but if someone knows the 'how to', please help us.
thanks in advance
jssanche

Hi Sanchez,
I am afraid you could not do that. User defined field is not be added into landed cost. Landed cost seems like process external bank statement. I have ever asked to SAP support about this (how to add UDF in process external bank statement) and they said it could be done using add-on. You have developed add-on to do that (DI/UI or UI API only).
Rgds,

In XML Gateway Responsibility How to add User defined Trading Partner type.

Hi,
We have a requirements to add user defind Trading Partner Type apart from the default trading partner type.
How to do this? If any one know , kinldy let me explain it
Thanks

I looked it up in the mean time ...
The docs state that you only can use simple data type or java.util.list or AttributeList (which is a wrapper for any viewRow). So I guess you have to somehow flatten your complex data type or create a custom VO which holds it.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#CJAEHFJD
Scroll down to 11.2.3
Timo

How to add User defined return type in service interface of AppModule

HI All,
I am creating service interface using AppModule. Added custom method with Java primitives and working fine. Now i want to added custom method with return type is EMP object means user defined object. How can i do so?
Thanks in advance.

I looked it up in the mean time ...
The docs state that you only can use simple data type or java.util.list or AttributeList (which is a wrapper for any viewRow). So I guess you have to somehow flatten your complex data type or create a custom VO which holds it.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#CJAEHFJD
Scroll down to 11.2.3
Timo

My user defined menu items not shown up in Main Menu

Hi,
I have some my own menu items need to add into Main Menu list, it works fine but only issue is the screen flash lot. Since all the menu items are in the form called "Main Menu" form then I tried to use oForm.Freeze(true) and oForm.Freeze(false) before and after adding menu items. Now the weird thing is though the screen doesn't flash but i can't see the new added menu items in the Main Menu form. But I can see them under the system menu Modules menu. Any idea?
Thanks!
Lan

Hi All,
After check the SDK help, I found the reason. I need to call oForm.Update() after. Now it works well.
Lan

URG !!!!!!!! how do i add user defined information in a header

suppose i have login page - , now i want to add login name as request header and pass it to servlet .. .
i.e how do i send the login information in the headers..
plz help me

suppose i have login page - , now i want to add login name as request header and pass it to servlet .. .
i.e how do i send the login information in the headers..Why do you want to send them within the Request Header ?
Usually they are sent as request parameters.
andi

How to add user defined search help to data element -EXTWG ?

Dear All,
EXTWG is external material groupp field in Material Master. I am using this field to provide some external material group .But there is no search help attached to it. I want to create a search help and attach to it .I can create a search help but how to attach to a standard date element .How can i do??

hi
good
go through this links ,i hope these ll help you solve your problem
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/8d7307b1af11d194f600a0c929b3c3/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
thanks
mrutyun^

[3.0.04] Delete user defined report folder

Hello Forum,
a few days ago, I got a new computer and exported my user defined reports from the old installation. After importing these into the new installation, all reports were put into an additional subfolder. Since I'm using german localization, the reports were put into "Benutzerdefinierte Berichte/Benutzerdefinierte Berichte". I could move them one folder up by cut and paste, but now I would like to delete the empty subfolder, but I don't have any menu options to do so.
Is there any way to get rid of that subfolder?
Many thanks in advance,
dhalek

Hi Binom,
Correct. In fact similar behavior reported in earlier posts such as...
Bug 2.1: Report folders are read only
1.5.5 Cannot add user defined report to folder
...resulted in the logging of an internal bug:
Bug 9231534 - FORUM:USER DEFINED REPORT FOLDER MISSING ACTIONS IN NON ENGLISH LOCALES
I updated it with a reference to this forum thread in order to give it a bump.
Thanks,
Gary Graham
SQL Developer Team
Edited by: gggraham on Aug 1, 2011 1:30 PM

Add user-defined menu to GUI toolbar

Similar Messages

Maybe you are looking for