Add Users in CUE with Bulk

Hello,
I'm trying to to find a way to add 150 users with their extensions on cisco unity express 8.6.4 one time instead going one by one as it consumes a lot of time.
Is there a way in CUE to acheive such requirements?. If not what about third party that can do the same.
Please advise guys.
Thanks

If you look in "Documents", time ago I posted a router TCL script that does that from a .CVS file.

Similar Messages

Add users to group with file

So I am following power-shell script that I see online.
I am trying to add 2 users (as a test for now) from a csv file into an AD group.
The AD group name is "IMAllow"
I created a file called AddUsersToGroup.ps1 that I am running on windows power-shell.
The file contents are below
# Add User to a Group - PowerShell Script
Import-module ActiveDirectory
Import-CSV "C:\Scripts\Users.csv" | % {
Add-ADGroupMember -Identity IMAllow -Member $_.UserName
And my file with users is called "Users.csv"
wahidta
indenga
I get the following error
Add-ADGroupMember : Cannot validate argument on parameter 'Members'. The argument is null or empty. Supply an argument
that is not null or empty and then try the command again.
At C:\Users\zzwahidta\Scripts\AddUsersToGroup.ps1:7 char:44
+ Add-ADGroupMember -Identity IMAllow -Member <<<< $_.UserName
+ CategoryInfo : InvalidData: (:) [Add-ADGroupMember], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.ActiveDirectory.Management.Commands.AddADGrou
pMember

Get-Help Add-ADGroupMember or http://technet.microsoft.com/en-us/library/ee617210.aspx
$creds = Get-Credential
Add-ADGroupMember -Identity IMAllow -Member $_.UserName -Credential $creds
I hope this post has helped!

Add user in ACS with limited access

Dear
I have low experiance with cisco ACS
So kindly i need help to add user to The ACS which has limited access to my network Switches ( As Show only not to change configuration )
Also how to take backup for the ACS Database
Thanks,

Hi,
Search about command authorization in the AAA section, you'll get ample information about it, i.e., on how to configure network devices so that you can allow certain users on ACS to have limited and certain user to have full access.
About taking a backup, that is pretty simple.
System Configuration > ACS Backup > Backup Now.
And you have a latest backup from ACS.
Regards,
Prem

Can't add user after login with KDM

Hi,
I start kdm in rc.conf with reboot and login as user I setup Arch linux. It seems this user name is not admin and can't add other users.
I may miss sth to do before I start KDE. What should I do?
Thanks very much for help.
Mike

The issue is I can't see any users and groups existing by "users and groups" tool under systems of menu.
Even I can add new user (this means I am admin), I can't change anything under "Login manager"
What I should do first.

Integrating UCCX with Presence - Unable to Add Users to Contacts List

Hi,
I'm trying to integrate UCCX with Presence via the Desktop Administrator. I have created an enduser (LDAP Sync) and assigned the user a Service Profile which includes the Directory UC Service for LDAP, have tried both LDAP and GC configuration.
I can make the connection the Presence Cluster, validation works. However I'm hitting the "CDAUI2067 Search did not complete successfully, and only partial results are displayed. Contact technical support." When trying to add users to the Contact List. Seems like the BUG ID CSCtg94342? However there is no reference to this bug id for UCCX 10.0 only 7.1
Has anyone successfully integrated UCCX 10 with IMP10? If so, please advise the UC Service/Profile configuration for the End User.
Thanks
Ben

Hi Ben,
when configured Client type CAD, I didn't uncheck Version Check Required.
Now I can complete configuration in Cisco Desktop Administration, but when I try to login with CAD client I cannot login to the Presence server - the following message appears:
"An error has occurred communicating with the Cisco Unified Presence Service.
The application will automatically continue attempting to connect."
In log file I found the following "2014-12-05 09:24:23:450 ERROR STD2001 Client <SawConnectionManager> failed to connect to any service." instead of eg. "INFO STD2004 Client <SawConnectionManager> connected to service at <cup1.dcloud.cisco.com>."
Does anybody have any idea what could be the problem?
Thanks,
Milan

HT5312 how do i add my music library with another apple id user's music library?

How do I add my music library with another Apple ID user's music library?

Locate the folders containing the song files, and use the command File > Add Folder to Library.

Add user to acs 3.2 with csutil -i file

Hello,
I'd like to import to my acs a file for add user.
I don't know the parameter to use to define the CLI/DNIS-based access restriction.
Now I use the string
ADD:<user>:CSDB:<password>:PROFILE:<group-number>
But I must to go to web console to restrict the access...
Can you help me? Or you can suggest a work-around?
Thanks in advance,
best regards,
massimo

ADD Statements has only options specified in the below URL
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/ae.html#wp365267

Bulk Add Users to Group Using Log on Name

I have found that the following windows command will add a user to a group in AD:
dsquery user -samid <logonname>|dsmod group "CN=<groupname>,CN=Builtin,DC=<domainprefix>,DC=<domainsuffix>" -addmbr
My question is how can I package this into some sort of script to take the logon names (samid) of many users a run them through this so that they are each added to my group?

@echo off
setlocal
set pwd= password
for /f %%a in (users.txt) do (
dsadd user "CN=%%a,OU=<OU> ,DC=<DC>" -pwd %pwd%
You can add users in users.txt
I hope this works
\m/

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

Active Directory and 10.8 Server: Can't add users

I would be most appreciative of any help you folks can give a Mac user at a predominantly Windows/MS/Exchange Tier I university.
I bought a MacMini to act as the departmental File server to allow a granular level of permissions on folders for faculty, administration, residents and students. The students and residents rotate in yearly or for 2 years at a time.
The problem has become when I try and add users from the IT ActiveDirectory domain. The IT folks set-up the DNS, gave it a static IP address etc. all correctly.
The MacMini was also bound to AD in Sys Prefs > Users & Groups > Login Options > Network Account Server to the domain.
There are over 200,000 users in the university system. When I try and search for a user in the Users sidebar it pulls up a completely random list of users and lists "500+ users" next to the buttons. When I try and search for a user, invariably it fails. Furthermore, there is the term "Not Allowed" next to the names of all the random AD users.
What am I doing wrong?
The Sys Admin guy I spoke with said the only way he could figure it out was to go to Groups sidebar, create a new group and add the user that way.
The whole premise for this is to allow the users the same login ID and PWD they do for every other service on campus. That's it. I then want to be able to control folder permissions directly on the MacMini. Is this possible or do I need to use Open Directory in conjunction with AD?
Any help for this formerly Apple Power User would be greatly appreciated.
Thanks folks.

Hi
This is a Jabber-ism I think.
You get this if you are using UDS and the users you are trying to add aren't CUPS-enabled.
You probably also get it if the users are from LDAP and aren't CUPS enabled.
CUPC by comparison allows manual contact creation as well as adding of non CUPS people.
Regards
Aaron

HELP: I can no longer add users to my external hard drives

Sorry for the duplicate, someone hacked my other account.
So here's the skinny, I was following some instructions on here to remove the "unknown user" from the list of users that was attached to my Hard Drives.
Path: System Preferences/Users and Groups/Login Options/Join/Open Directory Utility/Directory Editor.
Under Users from the pulldown I deleted "Unkown User" Now I am unable to add users to any of my external hard drives via Sharing under System preferences. When I click the + it will let me select a user, but when I click the select button it will not add that user to the list. It remains blank.
I've tried reformatting one of the hard drives, and a re-boot. Still am unalbe to add users.
Please help!

here is a copy of the disc utility log....laila is the name of the extrenal hd i was able to use successfully last.
2012-07-04 08:10:34 -0400: Disk Utility started.
2012-07-04 08:17:58 -0400: Preparing to erase : “LAILA”
2012-07-04 08:17:58 -0400:           Partition Scheme: Master Boot Record
2012-07-04 08:17:58 -0400:           1 volume will be created
2012-07-04 08:17:58 -0400:                     Name                    : “LAILA”
2012-07-04 08:17:58 -0400:                     Size                    : 160.04 GB
2012-07-04 08:17:58 -0400:                     File system          : MS-DOS (FAT)
2012-07-04 08:17:59 -0400: Unmounting disk
2012-07-04 08:18:02 -0400: Creating the partition map
2012-07-04 08:18:03 -0400: Waiting for the disks to reappear
2012-07-04 08:18:03 -0400: Formatting disk3s1 as MS-DOS (FAT) with name LAILA
2012-07-04 08:18:04 -0400: 512 bytes per physical sector
/dev/rdisk3s1: 312505472 sectors in 4882898 FAT32 clusters (32768 bytes/cluster)
bps=512 spc=64 res=32 nft=2 mid=0xf8 spt=32 hds=255 hid=2 drv=0x80 bsec=312581806 bspf=38148 rdcl=2 infs=1 bkbs=6
2012-07-04 08:18:04 -0400: Mounting disk
2012-07-04 08:18:06 -0400: Erase complete.
2012-07-04 08:18:06 -0400:
2012-07-11 15:48:08 -0400: Disk Utility started.
2012-07-11 15:48:42 -0400: Eject of “Unattached Disk Image” succeeded
2012-07-11 15:48:42 -0400: Eject of “Flash Player” failed
2012-07-11 15:59:10 -0400: Disk Utility started.
2012-07-11 16:00:51 -0400: Disk Utility started.
2012-07-11 16:02:19 -0400: Disk Utility started.
2012-07-12 23:22:04 -0400: Disk Utility started.
2012-07-13 09:13:52 -0400: Disk Utility started.
2012-07-13 09:20:22 -0400: Disk Utility started.
2012-07-13 09:45:11 -0400: Disk Utility started.
===== Friday, July 13, 2012 9:47:15 AM Eastern Daylight Time =====

Add User to Group Behavior

Hi all
I found
this post that explains the same issue I'm having, but the marked answer isn't relevant to my environment. I've built a user creation runbook, using 2012 R2 and this
Active Directory Integration Pack. Everything works properly, except I'm getting strange security log events when using the Add User to Group activity.
In one of the tests, I added a single user that was being created to about 100 different groups. Let's say one group has 50 members. When the user gets added to that group, the security audit shows that 50 users were removed from the group, and then those
50 users were added back plus my new user. It shows this activity for every group that the user was added to. I get the following two actions for every member of the group:
Member '-' was removed from 'Domain\Group' by 'Domain\User' on...
Member 'DN of Member' was added to 'Domain\Group'...
This is a problem because it makes our audit reports and notifications worthless since we'd have to read through all the noise to see an actual anomaly. I'm also concerned that if users are actually being removed and re-added to those groups, that there
could be some consequences of that that we aren't seeing yet (i.e. application access interruptions, or what if the connection to AD is lost after removing the users but before adding them back in). Although I should say I'm not convinced that the users are
actually being removed because as you can see above, no member information is recorded on the removal, and all the removals and additions have the same exact time stamp meaning they occurred within 1 second, which seems pretty fast given that some of our groups
are large.
Is this the intended behavior of the Add User to Group activity? If so, is there a workaround I can use to avoid this behavior? The next thing I'll try is using PowerShell to add the user to the group, but this option isn't ideal since the runbook will be
managed by users who are not that familiar with scripting, so I'd like the solution to contain as little as possible.
Thanks

Hi,
the issue of the AD IP 7.0 is reported here
http://social.technet.microsoft.com/Forums/de-DE/eef9cdda-774f-4b95-bd89-aa3f86feee9b/ad-integration-pack-add-user-to-group-activity-problem?forum=scoscip
Try the up-to-date Version 7.2
http://www.sc-orchestrator.eu/index.php/scoblog/115-updated-system-center-2012-r2-orchestrator-integration-packs-available
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Calendar Server - Unable to add users

When I try to add users to a node I get an error message like:
Working please wait...
unidsattach failed, see /users/unison/log/unidsattach.log, Error Code =
0x13205
Add user [uid=ttesting,o=Airius.com] to node: failed
Add user(s) to node completed.
<P>
This means that the Calendar Server is unable to communicate
properly with the Directory Server. There are some Calendar-specific
entries and an ACI that are added to the Directory Server when a node is
created. These are critical to the proper functioning of the Calendar
Server. This error may mean that they are missing.
<P>
You can also check the access log file of the Directory server to see what
the problem may be. If you see entries like:
[27/Jan/1999:07:39:47 -0500] conn=1 op=2 SRCH base="o=Airius.com" scope=2 filter="(nsc
alxitemid=15000:00001)"
[27/Jan/1999:07:39:47 -0500] conn=1 op=2 RESULT err=0 tag=101 nentries=0
This indicates that 0 entries were returned for the search on the SYSOP
Calendar user.
<P>
If you have recently imported data into your Directory Server, it is likely
that these entries no longer exist. An import to a Directory Server does
not append data; it replaces the current directory with the data in the
LDIF file being loaded. You will need to recreate this Calendar information.
Export your directory to an LDIF file and review the output to see if these
entries exist.
<P>
Here is a boilerplate that may be useful if you don't have a backup copy
of the original LDIF. Try replacing the baseDN (o=Airius.com) and the node
id (15000) to match your Calendar configuration. The password is "password".
The following is for illustration purposes and may not fix all problems:
aci: (target ="ldap:///o=Airius.com")(targetattr = "*")(version 3.0
; acl "Untitled"; allow (write, add , delete ) groupdn = "ldap:///cn=Cal-A
dministrators-15000, o=Airius.com" ;)
dn: cn=Cal-Administrators-15000, o=Airius.com
cn: Cal-Administrators-15000
objectclass: top
objectclass: groupofuniquenames
uniquemember: nsCalXItemId=15000:00001, o=Airius.com
uniquemember: nsCalXItemId=15000:00002, o=Airius.com
uniquemember: nsCalXItemId=15000:00003, o=Airius.com
uniquemember: nsCalXItemId=15000:00004, o=Airius.com
uniquemember: nsCalXItemId=15000:00005, o=Airius.com
uniquemember: nsCalXItemId=15000:00006, o=Airius.com
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140113Z
modifytimestamp: 19980501140113Z
dn: nsCalXItemId=15000:00001, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00001
sn: SYSOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00002, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00002
sn: CWSOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00003, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00003
sn: STREAMOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00004, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00004
sn: FOREIGN
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00005, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00005
sn: SYNCH
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00006, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00006
sn: HOLIDAYOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z

Probably in the next couple of weeks, we are releasing beta-2.
Kumar
Jim Clark wrote:
>
thanks, how often is there a beta refresh?
Jim
"Kumar Allamraju" <[email protected]> wrote in message
news:[email protected]..
Jim,
I do not see this problem in the latest source line.
Probably I'm running a WLS server that is slightly newer than the beta,
so maybe
some things might have been fixed.
Kumar
Jim Clark wrote:
I was able to add users and groups through the "console" app, but I was
unable to add users to the groups. After I added a user "jim" and a
group
"clark", I tried adding "jim" to the "clark". It just said "Addeduser...",
and this, "Members: (none)".
Jim

File Sharing - External Drive - Unable to add user

Hello,
I am trying to share a folder within an external firewire drive. However, when in the "File Sharing" section, I am unable to add users after adding the folder to the "Shared Folders:". The add user dialog appears, but when a user is selected and the "Select" button is clicked, the user does not appear in "Users:".
The external drive is formatted "Mac OS Extended (Journaled)" with an Apple Partition Map.
Thanks for any suggestions.

try adding this user from finder rather than fro system preferences. select this folder in finder and enter command+i. in the resulting popup go to the permissions section and add the user you want.

AppServer: problems trying to add users to roles in security dialog

I'm trying to learn J2EE using AppServer. My current example has a client accessing
an entity bean. I want two classes of user - Reader, and Updater. Most methods
of Home and Remote are accessible to both classes, a few are restricted to users
in Updater role. I'm currently having problems adding users to roles in deploytool.
I have defined users using the Admin client.
I have implemented and test run client and entity bean without security restrictions, it works.
I have defined roles associated with the application.
I have allocated roles to every method in Home and Remote interface of bean.
I have extracted the generated XML file and checked the <assembly-descriptor> section and
it appears that all roles and role descriptions are defined as required.
deploytool lets me use the "Security Role Mapping" dialog, I can select either of my roles and
try "Add user to role" - subsequent dialog shows my users and allows me to "Map user to role" -
but selected user does NOT appear in the user names panel.
What am I doing wrong or what am I omitting? Hints please!

Thanks for suggestions. (I'm using Windows so file-protections pretty
non-existent).
I looked in the Sun file you mentioned and found the users were defined.
When I restarted AppServer and deploytool, the users were shown in the appropriate
panel.
There is probably some minor bug in deploytool that causes the User Panel not
to be updated as it should be after a user has been added to a role.

Add Users in CUE with Bulk

Similar Messages

Maybe you are looking for