Add users to Windows logon screen (server 2008 R2)

Hello
Our one server was setup to display 3 user names in the logon screen, vs just the username / domain options to fill out.
The settings have been blown away somehow, and i need to re-add a few users to the logon screen.
I have tried the suggestions with no luck. Most sites recommend Interactive Logon: Do not display last user name gpo
setting. This did not work for me.
Any help would be appreciated.
Thanks

Hi Giermo,
Please try to modify the regeistry to achieve this, please also note Always make a backup of the Windows Registry before you modify any settings:
Open regedit
Press Windows+R
Type regedit + enter
Navigate to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList]
You will probably want to right-click on “ProfileList” and click export to save the entire subtree in case something goes wrong.
You will find several subfolders or “keys” named something like “S-1-x-xx…”, open them one at the time
Each should contain at least the three value-sets, “Flags”, “ProfileImagePath” and “State”, some will contain more
Look at the end of ProfileImagePath for the name of the user represented by the key
You will usually have one for each user on the system, and one for each of the three system entries ‘systemprofile’, ‘LocalService’ and ’NetworkService’
Delete any key (i.e. the whole “S-1-x-xx” folder) that does not contain at least those three values. Also delete any empty key named default.
Reference from:
Windows 7 Welcome Screen doesn't display user account
Best Regards,
Anna

Similar Messages

Joining Windows Server 2008 to Windows Small Business Server 2008

We have Windows Small Business Server 2008 and it came with a copy of Windows Server 2008 and MS SQL. (A packeged deal from Microsoft).
Long ago I installed Windows Server 2008 and MS SQL on a computer and joined it with SBS2K8.
My Windows Small Business Server 2008 crashed and I had to redo it and now I can't get the Windows Server 2008 to join it.
We are not using the computers for a domain or anything but they are on our network with regular IP addresses.
The Windows 2008 Server uses the SBS2K8's IP address for it's DNS. The DNS for the SBS2K8 is 127.0.0.1
We are using Windows Server 2008 for SolidEdge and MS SQL has to authenticate against the SBS2K8 to run.
Should I hook both computers up to a switch for their own network to get them talking to each other?
Do I have to put the Windows 2008 Server name in the SBS2K8 for a user?
Please advise and thanks.

Hi:
Read the warning at the end of this and be sure you follow it.
Can you explain further this part: We are not using the computers for a domain or anything but they are on our network with regular IP addresses.
I ask because SBS MUST be a domain controller or it will not work. Right click My Computer - Properties - Computer name tab and let us know if the SBS is "domain" or "workgroup".
What I expect is the SBS is a Domain, and when you reinstalled it it becomes a new domain, even if it has the same name. The Server was a member server in the old domain, so the solution to this is to change the Server 2008 with SQL from domain to
workgroup in the same place as above, then after it restarts rejoin it to the SBS domain by changing it once again to Domain.
Both the SBS and the Server 2008 should have static ip addresses and the SBS should be the DHCP server for the rest of the network, not your router/firewall.
Warning: You MUST check in control panel - users on the Server 2008 to verify you have a local administrative level account and you are positive you know the password for that account. When the server restarts after being placed into workgroup
mode the domain administrator will no longer be able to logon to the Server 2008.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit.

How to add the zorin os and domain server 2008

Since Zorin is just a flavour of Ubuntu you should be able to use any of the guides for adding Ubuntu to Active Directory. You can use Samba, Winbind, LikewiseOpen or another package to add it.
Here is some more information: http://askubuntu.com/questions/33592/how-do-i-join-a-windows-active-directory.

how to add the zorin os and domain server 2008
kindly help as
This topic first appeared in the Spiceworks Community

Warning: Palm OS Treos and Windows Small Business Server 2008

If you use a Treo smartphone with the Palm operating system, beware: it does not work with Microsoft Windows Small Business Server 2008.
Palm acknowledges this failure and has no intention of fixing it.
There are at least two problems:
(1) You must turn off all email security on the Exchange mail server to sync with Treos.
(2) AutoSync locks up the Palm each time it occurs, and must be turned off.
Here's the transcript of my chat w/tech support. After this, I spent a few hours on the phone and got the same answers.
[12:35 AM] Gary says: Hello.
[12:35 AM] Handoff connection active (1/5140).
[12:35 AM] x says: Hi. Please see the question sent earlier.
[12:36 AM] Gary says: Could you please be more specific about the issue?
[12:37 AM] x says: Our Palms will not talk to Exchange Server 2007 unless all its security
features are turned off. This is a problem with Palm/VersaMail. When will it be corrected?
[12:38 AM] Gary says: Yes, that is true. I am sorry for the inconvenience this may have caused.
[12:38 AM] Gary says: I am very sorry to inform you that currently we do not have any information on this.
[12:39 AM] x says: Apology accepted and appreciated. But when will this be fixed?
[12:40 AM] Gary says: Unfortunately we do not have any sort of update on this. I suggest you to post the
feedback in the Palm Website.
[12:41 AM] x says: Okay, next question: Every AutoSync locks up the Palm, so we have to turn
AutoSync off. Do you intend to rectify this problem?
[12:42 AM] Gary says: I understand your concern. Is it happening with all the Palm devices?
[12:42 AM] x says: Yes.
[12:43 AM] Gary says: Do you receive any error message before locking up the Treo?
[12:43 AM] x says: No.
[12:46 AM] Gary says: Okay, as this happening with all the devices to me it looks like the issue should be
diagnosed closely to find the root cause. Was this happening with the Exchange Sever 2003?
[12:46 AM] x says: No
[12:46 AM] Gary says: So, the AutoSync feature is Locking the device from the day you upgraded to the
Exchange Sever 2007.
[12:46 AM] Gary says: Am I correct?
[12:47 AM] x says: yes.
[12:48 AM] Gary says: Okay, as this is the issue related to the sync with the Exchange Server 2007 and the
AutoSync to find out the root cause I will escalate this issue to our escalation channel which is our Voice
Support Team.
[12:48 AM] Gary says:
I will provide you all the information and guide you in the correct direction to address this issue.
[12:48 AM] Gary says:
I suggest you to get in touch with the Voice Support and I am sure they will fix the issue.
[12:49 AM] Gary says:
I will provide you a Service Request, when contacting the Voice Support, provide this Service Request Id and you will get a free Technical Support.
[12:51 AM] Gary says: Please provide me your Last name, First name, complete address, phone number,Email address, date and place of purchase of device and serial number of the device to create a Service Request Number.
[12:51 AM] x says: Of course I provided all this when I logged in, but here it is again:....
[12:54 AM] Gary says: Thank you for providing all the information.I need 5 minutes to register the device and create a Service Request.
[12:55 AM] x says: Thanks for your help, and confirmation of the incomprehensible failure to support Exchange Server 2007. We're this close to dumping these things if this is the kind of tech support Palm intends to provide.
[1:00 AM] Gary says: Thanks for staying on hold: I am sorry for the delay. I can understand the inconvenience you are facing.
[1:01 AM] Gary says: Based on the information you provided, I created a service request for you in our database. The Service Request number is : 1-51558238041
[1:01 AM] x says: Will I get an email?
[1:01 AM] Gary says: Using this service request number, you need to contact our Voice Support department. Voice Support Department number is 877-426-3777. Voice support will be available from 5:00AM to 9:00PM (PST) on weekdays and from 8am - 5pm PST on weekends.Please note down the above given Service Request Number and Voice Support Number or else you will lose this information once the chat session is closed.
[1:02 AM] Gary says: Yes, I will email this chat session to you.
[1:02 AM] Gary says: Is there anything else I can assist you with today?
Post relates to: Treo 755p (Sprint)

The problem is the default security profile isn't compatible. You can go into the Power shell command line and remove the default activesync mailbox policy.
Post relates to: None

Java for PI 7.1 EHP1 in Windows and SQL Server 2008

Hi Gurus
I try to install PI 7.1 EHP1 in Windows and SQL Server 2008. The questions is :
What version of java is the correct for this installation???
And where i can download it??
Thanks and advance!!!

Hi Aaron,
The version for PI 7.1 is 1.5, instead of the 1.4.2 of 7.0/3.0.
Anyway, for VM settings, you should refer to SAP JVM, which
is used for the PI 7.11.
Hope it helps!
Regards,
Caio Cagnani

Unable to execute embedded application windows azure in Windows Vista and Server 2008

I'm having problems to install the backup application Azure.
In Windows Vista and Server 2008 .
I segudo instructions :
http://support.microsoft.com/es-es/kb/2934202
But I still can not install the agent.
When I run it , it is decompressed and then a window with an error.
Anyone else happens ?

The message that Windows creates me exactly is:
Unable to execute the embedded application to complete the installation.
After being , checking this:
Microsoft .NET Framework 4
Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package MFC Security Update
Windows PowerShell 3.0 (my machine is 2.0)
Microsoft.NET Framework 4 Client Profile (installed)
Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (installed)
The announcement of support Server 2008 64bit versions .
https://msdn.microsoft.com/es-es/library/azure/jj573031.aspx#BKMK_testsrv
I realize that my machine is 32bit Server 2008 Standard
http://azure.microsoft.com/blog/2014/10/06/announcing-support-for-backup-of-windows-server-2008-with-azure-backup/
It occurred to me descompri the MARSAgentInstaller package.
Run the application, but being 32bit my system , I think the Agent application is 64bit Copies Azure .
For this throws an error commenting same .

Not getting windows logon screen

HP 4530s Win 7 64 bit
Still dealing with the keyboard problems. After changing 3 keyboards, with 3 Case#'s, was told problem is probably in the software and before they would proceed I needed to return the system to the defaults (system restore from F11), disregarding my system image and if keyboard problem persists, then they will do something. I knew this was going to be a gigantic headache requiring many hours to get everthing back. Used Windows Easy Transfer to save user stuff and restore it after. Was right about many hours. After about 6 hours I have most of my stuff back, but will need several more hours to get things into correct folders etc. At present, my biggest problem is that instead of getting the Windows logon I get a HP logon that is similar in function to being in Safe Mode. It is a white screen and the cursor is large and moves jerkily. There are 2 circles in the center that appear to have a finger print in one, not sure of the other. In the upper left is a button for PASSWORD and above that Audible Alerts Disabled, F5 to Enable. Above that is the computer name. How do I get rid of this and get the Windows Logon instead?

Hi Glamorgranny,
First, you may want the sidebar displayed so we can easily see connected devices:
Show Sidebar - Choose View > Show Sidebar (this feature will display iTunes features on the left side of the application including Library, Store, Shared, Genius, and Playlists).
Note: if you do not see the "View" option, turn on the menus by pressing Control-B.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
After clicking on the device on the left hand side, you should see the Summary page. You can then navigate to the different tabs:
For more information, see this resource:
iOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
If your device is not displayed in the sidebar when connected, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Windows Installer - SQL Server 2008 Express Errors

I am working with an application that was developed for an XP machine. One of my peers took the old Windows application and using Visual Studio 2010 upgraded the application to work on a Windows 7 machine. We are creating the installer (.exe
and .msi) files within Microsoft Visual Studio 2010, but we are having different issues on different machines that we try to run the setup.exe file on.
On our company computers with Windows 7, the setup.exe file runs and works properly.
On our customers computer with Windows 7, received the following error: "an error occurred attempting to install SQL Server 2008 Express Service Pack 1."
On non-company/non-customer machines, we tried two Windows 7 machines. One machine had no issues and everything installed perfectly and the other received this error: "Component SQL Server 2008 Express has failed to install."
User pressed Yes to reboot the computer.
After the reboot, the setup.exe file was run and there were no more errors. The application was installed properly.
Within the Installer we have four boxes checked under Properties - Prerequisites:
Microsoft .NET Framework 4 (x86 and x64)
Microsoft .NET Framework 4 Client Profile (x86 and x64)
SQL Server 2008 Express
Windows Installer 3.1
If anyone can help with why the installer is causing issues on some computers and not on others as well as why the issues by computer are different that would be very helpful!
Thank you!

Hi,
Please refer to this article for troubleshooting installation of
SQL Server Express:
http://social.technet.microsoft.com/wiki/contents/articles/1146.sql-server-express-troubleshoot-installation.aspx
Check Summary.txt in the <SQLInstallFolder>\100\Setup Bootstrap\Log and see if you need to apply the Hotfix in the
KB 957453.
Thanks.
Tracy Cai
TechNet Community Support

Certain Users getting double logon screen when accessing the Portal

I have about 15 users out of 2500 that are getting the double logon screen when accessing the Portal. It's very intermittent, one minute it works fine the next minute it doesn't. I've tried almost everything on the client side, opened a case with Microsoft. Still no help.
Does anyone have any ideas on this?

The users are getting a login page with 2 login boxes. they can login, but it does not single sign them in.
Yes we are using SPNEGO, and it works for everyone except these users, and it does work sometimes for them
Yes it is possible these users are using NTLM becasue I see some events in the event viewer on the client indicating this
You find an event similar to the following event in the system event log:
Event Type: Warning
Event Source: LSASRV
Event Category: SPNEGO (Negotiator)
Event ID: 40961
Date: 10/27/2004
Time: 1:00:50 PM
User: N/A
Computer: COMPUTER
Description: The Security System could not establish a secured connection with the server ldap/DC01.corp.com/[email protected] No authentication protocol was available.
Edited by: Jeremy Rafuse on Dec 21, 2007 7:26 PM

Sun Desktop Access Client - Language Settings Windows Logon Screen

Dear All,
i have a little problem with the language setting of my Sun Desktop Acces Client if i try to connect to Windws 2003 Server.
First some configuration details:
PC:
Win XP (german version)
keyboard layout: german
Sun Desktop Access Client 1.0
Server:
Win 2003 Server (german version)
The Problem is that if connect the server via the SDAC the laguage setting of the logon screen has changed to EN
instead of DE. Using a german keyboard layout causes some trouble.
If i connect to the server via a sun ray dtu (kiosk mode) it works properly.
Has anybody a clue to get rid of this??
Thanks in advance.
Best regards
Ha-Pe

Okay, after a bit of investigation...
You can't have the locale used change automatically according to the local used on the client, the best you can do is assign a default locale for most users and create alternative kiosk sessions with different locales (as a uttsc option) which you can assign to DTUs or SDACs (or to smartcard token ids but SDAC doesn't currently support smartcards).
At least this is what I understand, I'm sure someone will comment if this isn't the case.
If this is good enough you can do this using the utkiosk and the utkioskoverride commands.

PKI SCCM Client Certificate Template not viewable by Windows 7 and Server 2008 workgroup machines.

Hello everyone,
I’m having issues with workgroup computers, not domain systems when I request a certificate.
It’s extremely weird. It has something to do with Windows 7 and Windows 2008 machines. In 2003 server I can request a certificate manually with certutil and it see the certificate template. I copy over the exact command
on windows 7 and it can’t see the certificate template.
I have the following configuration:
CA Enterprise
I have created the SCCM Client Certificate
I have created the SCCM Web Server Certificate
I have created the SCCM Distribution Point Certificate
GPO is configured
SCCM 2012 R2 CU2 configured to do HTTP and HTTPS
Installed SCCM Client Certificate
Installed SCCM Web Server Certificate
Installed Distribution Point Certificate
Deployed to a domain computer good on PKI
Workgroup Computers:
I’m having issues with deploying certificates
Windows 7 –
(ERROR) not successful
Windows Server 2008 R2 –
(ERROR) not successful
Windows Server 2003 - successful
Windows XP – successful
How I’m getting the certs for the clients is by utilizing the following scripts from this URL.
http://www.ithierarchy.com/ITH/node/48
I did find a couple of errors in the code, but if it’s working on my Server 2003, then it should work on the others. Windows 7 and Windows 2008 R2 seem to have the same issue. The error I’m getting is the following:
Command line requesting the cert ---- CertReq –new –f testcomputer.home.pvt.inf c:\client\testcomputer.home.pvt.req
Error --- Template not found.
SCCMClientCertificate (this is my template)

Just to give an update on what’s happening with this. I found out this format is unsupported by MS with Windows Vista and newer OS’s.
Instead you must utilize two other additional roles on the CA to have this work. The caviate is, I’m down to the testing and it’s not working as in the document. I have MS Support
working with me to resolve this issue since it was written by MSFT.
http://blogs.technet.com/b/askds/archive/2010/05/25/enabling-cep-and-ces-for-enrolling-non-domain-joined-computers-for-certificates.aspx
and use this doc for similar workgroup computers for rolling out certs. This was written for RT devices, however, it should work once I get to that point.
http://blogs.technet.com/b/pki/archive/2012/12/11/certificate-for-winrt-devices-and-non-domain-member-devices.aspx

PKI Client Certificate Template not viewable by Windows 7 and Server 2008 workgroup machines.

Hello everyone,
I’m having issues with workgroup computers, not domain systems when I request a certificate.
It’s extremely weird. It has something to do with Windows 7 and Windows 2008 machines. In 2003 server I can request a certificate manually with certutil and it see the certificate template. I copy over the exact command
on windows 7 and it can’t see the certificate template.
I have the following configuration:
CA Enterprise
I have created the SCCM Client Certificate
I have created the SCCM Web Server Certificate
I have created the SCCM Distribution Point Certificate
GPO is configured
SCCM 2012 R2 CU2 configured to do HTTP and HTTPS
Installed SCCM Client Certificate
Installed SCCM Web Server Certificate
Installed Distribution Point Certificate
Deployed to a domain computer good on PKI
Workgroup Computers:
I’m having issues with deploying certificates
Windows 7 –
(ERROR) not successful
Windows Server 2008 R2 –
(ERROR) not successful
Windows Server 2003 - successful
Windows XP – successful
How I’m getting the certs for the clients is by utilizing the following scripts from this URL.
http://www.ithierarchy.com/ITH/node/48
I did find a couple of errors in the code, but if it’s working on my Server 2003, then it should work on the others. Windows 7 and Windows 2008 R2 seem to have the same issue. The error I’m getting is the following:
Command line requesting the cert ---- CertReq –new –f testcomputer.home.pvt.inf c:\client\testcomputer.home.pvt.req
Error --- Template not found.
SCCMClientCertificate (this is my template)

Just to give an update on what’s happening with this. I found out this format is unsupported by MS with Windows Vista and newer OS’s.
Instead you must utilize two other additional roles on the CA to have this work. The caviate is, I’m down to the testing and it’s not working as in the document. I have MS
Support working with me to resolve this issue since it was written by MSFT.
http://blogs.technet.com/b/askds/archive/2010/05/25/enabling-cep-and-ces-for-enrolling-non-domain-joined-computers-for-certificates.aspx
and use this doc for similar workgroup computers for rolling out certs. This was written for RT devices, however, it should work once I get to that point.
http://blogs.technet.com/b/pki/archive/2012/12/11/certificate-for-winrt-devices-and-non-domain-member-devices.aspx

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

Problem with m1319f mfp on WIndows 7 and Server 2008

Hi there,
I just bought a m1319f mfp.
Plugged it in an old D-Link dp-300u print server.
The printer work fine on Windows XP.
Not working on Windows 7 and Windows server 2008.
I configured the port as in XP (adress, lp, queue name) and when i print from 7 or server 2008, there is a message on the printer saying "printing document". It stays there for a couple of minutes but no printing. No stuck document on the computer printing queue.
Every time i install the printer from 7 or server 2008, the print server have to be restarted (lights flashing).
The print server seems to fail when i'm on the Windows printer searching part (windows trying to find the printer when adding a new printer).
Maybe the dp-300u is too old?
I have another printer on it (LPT this time) and its working fine. Brother MFC7220 it is.
ANy idea?
Thank
Hope i have been clear, English is not my first language...

BUmp

Windows Small Business Server 2008 shutdown 180days 38 4

Hello to everyone,
I'm trying to solve a problem in a friend server.
i'm working on a Small Business Server 2008, it's a DC, NO sharepoint, NO Exchange (there is another software), NO DHCP (firewall do it), WINS and DNS enabled.
Some days agoo Server has shutdown and in event viewer i found this 2 errors:
38 and 4
Event ID 38:
"The Additional Server Count Check detected a condition in your environment that is out of compliance with the licensing policy. This server will be automatically shut down if the issue is not corrected in 68 day(s) 19 hour(s) 30 minute(s). Please look
for additional events for Additional Server Count Check to troubleshoot."
Event ID 4:
"The Additional Server Count Check in the Licensing component did not pass because error 0x8007200a occurred in function f1031 [PFVK].
The specified directory service attribute or value does not exist.
I tried slmgr.vbs -dli and it's Licensed correctly.
So i ran dcdiag /q and i've seen many errors like this:
EventID: 0x0000168F
Deleting dynamic of the DNS record '_kerberos._tcp.dc._msdcs.dominio.local. 600 IN SRV 0 100 88 server.dominio.local. 'failed on the following DNS server.
I ran dcdiag /fix but problem still remains.
I really don't know how to fix this issue...
Anyone have an idea?
I also thought to use, in the extreme case, -ream , like slmgr.vbs -rearm, but i don't know how many times i can rearm server.
Thank you and have a nice day

Here you are DCPromo Log, it's in Italian 'cause is an Italian Server, btw i can translate.
Controllo dell'installazione dei file binari di Servizi di dominio Active Directory in corso...
Installazione Servizi di dominio Active Directory
Convalida dell'ambiente e dei parametri in corso...
Impossibile creare una delega per questo server DNS perch‚ la zona padre autorevole non Š stata trovata oppure non esegue il server DNS Windows. Se si sta effettuando l'integrazione con un'infrastruttura DNS esistente, Š consigliabile creare manualmente una delega per il server DNS nella zona padre per garantire una risoluzione dei nomi affidabile dall'esterno del dominio nameserver.local. In caso contrario, non Š necessario eseguire alcuna operazione.
Verranno eseguite le azioni seguenti:
Configurare il server come primo controller di dominio Active Directory in una nuova foresta.
Il nome del nuovo dominio Š nameserver.local e corrisponde anche al nome della nuova foresta.
Il nome NetBIOS del dominio Š nameserver
Livello di funzionalit… foresta: Windows Server 2003
Livello di funzionalit… dominio: Windows Server 2003
Sito: Default-First-Site-Name
Opzioni aggiuntive:
Controller di dominio di sola lettura: No
Catalogo globale: S
Server DNS: S
Crea delega DNS: No
Cartella database: C:\Windows\ntds
Cartella file di registro: C:\Windows\ntds
Cartella SYSVOL: C:\Windows\sysvol
Il servizio Server DNS verr… configurato in questo computer.
Il computer verr… configurato per l'utilizzo di questo server DNS come server DNS preferito.
La password del nuovo amministratore di dominio Š identica alla password dell'amministratore locale di questo computer.
Avvio in corso...
Verifica della necessit… di installare Console Gestione Criteri di gruppo in corso...
Premere CTRL+C per: Annulla
Configurazione del computer locale per l'hosting di Servizi di dominio Active Directory
Creazione della partizione di directory: CN=Schema,CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 1585
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 1250
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 966
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 739
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 535
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 367
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 204
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 57
Creazione della partizione di directory: CN=Configuration,DC=nameserver,DC=local in corso. Oggetti rimanenti: 0
Creazione di oggetti Servizi di dominio Active Directory nel controller di dominio Active Directory locale
Impostazione delle informazioni sul criterio LSA
Impostazione della radice del nome DNS del computer a nameserver.local
Protezione in corso di machine\software\microsoft\windows
Protezione in corso di machine\system\currentcontrolset\control
Protezione in corso di machine\system\currentcontrolset\control\class
Protezione in corso di machine\system\currentcontrolset\services
Protezione in corso di c:\windows\system32\spool
Operazione sul controller di dominio completata.
Configurazione del servizio Server DNS nel computer in corso...
Installazione di Servizi di dominio Active Directory completata in questo computer per il dominio nameserver.local.
Questo controller di dominio Active Directory Š assegnato al sito Default-First-Site-Name. Ô possibile gestire i siti con lo strumento di amministrazione Siti e servizi di Active Directory.
I controller di dominio Windows Server 2008 hanno un nuovo valore predefinito, pi— sicuro, per l'impostazione "Consenti algoritmi di crittografia compatibili con Windows NT 4.0". Il valore impedisce che "client" Microsoft Windows e non Microsoft SMB usino algoritmi di crittografia vulnerabili di stile NT 4.0 per stabilire sessioni su canale sicuro con controller di dominio Windows Server 2008. Ne consegue che operazioni o applicazioni che richiedono un canale sicuro gestito da controller di dominio Windows Server 2008 potrebbero non funzionare.
Le piattaforme interessate dal cambiamento sono Windows NT 4.0, i "client" non Microsoft SMB e dispositivi NAS che non supportano algoritmi di crittografia pi— avanzati. Ci sono inoltre conseguenze per alcune operazioni in client che eseguono versioni di Windows precedenti a Vista con Service Pack 1, come l'aggiunta a un dominio effettuata dall'Utilit… di migrazione ad Active Directory o da Servizi di distribuzione Windows.
Per ulteriori informazioni, vedere l'articolo 942564 della Microsoft Knowledge Base all'indirizzo http://go.microsoft.com/fwlink/?LinkId=104751.
Ô necessario riavviare il computer per completare l'operazione.

Add users to Windows logon screen (server 2008 R2)

Similar Messages

Maybe you are looking for