Add vendor information in FB60
In FB60, how to add vendor information in the right side of input screen?
For example, I want to add the Postal code and Telebox under the name of vendor.
I know I can implement it in business add-in "BADI_FDCB_SUBBAS04", but it's too difficult for me
to edit the correct program.
Can anyone tell me how to do it in detail?
Thank you.
Edited by: Yong Sheng Dang on Jun 24, 2008 3:46 AM
Nobody knows it?
Similar Messages
-
Hello,
Is it possible to modify what vendor master data information is displayed in FB60 in the Vendor information box to the right of the header tabs? Currently we are only seeing address information and would like to add additional fields from the vendor master.
Thanks.Hi Kevin,
Try using a screen variant using transaction SHD0. You can check for an existing variant using the program (SAPLFDCB) and screen number (70). Use the system/status menu path from FB60 to find the program if the one I provided doesn't work.
If a screen variant doesn't exist, create a new one. The available fields from the vendor master may be limited. You can research adding new ones if they are not in the list. You can hide or display existing fields.
Good luck!
KF -
PeopleSoft Financials: Enable user to add/edit vendors information
I want to create a user would Add and Edit Vendors information from his account/UserID.
For that I have created a new User, but not sure what roles/permissions should be assigned to him to enable him to Add information for Vendors.
Right now if I try to add new vendor from his ID I get Not-Authorized error.
Please let me know.Whenever you run into this issue, look up the content reference for the component in the portal through
main menu - peopletools - portal - structure and content.
After you found the content reference click on the edit link.
In the second tab Security, you will find the permission lists that have access to this content reference/component.
Assign one of the permission lists to your user and you user will have access to the content reference and component. -
Steps to upload vendor invoice(tcode fb60) in bdc
hi, iam srinivas can any one plz send me the steps to upload veneor invoice tcode is (fb60).i dont want the code but i want the steps to create .
thanks and regards.
Srinivas.refer this site.
FI_AP_FBR2_Post_With_Reference (FBR2)
Business Process Description Overview
Use this procedure to copy a previously posted non-PO invoice document that uses many of the same values.
This may help reduce data entry time if used correctly. For example, the library invoice vouchers that have the same vendor but many invoices on them might be a good example of when to use this transaction code.
Trigger
Perform this procedure when there is an invoice that needs to have data entered where most of the fields are the same as a prior invoice document already entered in the system.
Prerequisites
· Security Role: AP_DIR_INV_ENTRY
· An FB60 invoice has already been data entered.
Menu Path
None
Transaction Code
FBR2
Tips and Tricks
· If you would like to save this transaction under your "Favorites" folder, right-click on the "Favorites" folder, select "Insert Transaction" and type in this t-code when the box appears.
· You may use the transaction code: search_sap_menu to search for a transaction codes menu path.
Procedure
Enter Vendor Invoice: Company Code PUR
Typically the FBR2 - Post With Reference transaction is accessed from the Financial transaction code that you just used. For Accounts Payable, typically we would use the FB60 transaction code to enter invoices that are not PO-related. After you have entered an invoice, you can now post a second invoice. Feel free to post an invoice in DEV to the Vendor ID number: 31. Choose today's date as the Invoice Date. Enter a Vendor Invoice in the Reference Field. Enter $1000 as the Amount. Enter a Text that you want to show on the remittance advice to the vendor. Choose your own GL Account and Cost Center. Enter 21010000 as the Fund. Make sure to also enter $1000 in the Amount in doc. curr. field.
Please be aware that the FB60 screenshot above is using the ZPurdue Variant so unless you are also using that same variant the order of your columns may differ.
Refer to FB60 documentation for more information regarding entering a non-PO related invoice.
After an invoice has been entered, you may proceed to step 1. If you prefer not to enter an FB60 invoice then after you open FB60, immediately do step 1, but enter "1900001354" in the Document Number field.
1. Select Goto Post with reference Shift+F9 to go to the FBR2 transaction.
Post Document: Header Data
The document number you just entered in FB60 should now display. If you did not first enter your own FB60 invoice, please enter 1900001354 in the Document Number field. Make sure Company Code is PUR and Fiscal Year is 2007.
If you did enter your own FB60 invoice to reference to, please be aware that the data entry fields will have different content in the screen shots than what you are seeing on your screen.
2. Click or the "Enter" key to proceed.
Post Document: Header Data
Because we want to avoid paying the same invoice twice, we must change the reference field to another Vendor Invoice text.
3. As required, complete/review the following fields:
Field Name
R/O/C
Description
Reference
R
Allows for further clarification of an entry by reference to other sources of information, either internal or external to SAP. Any SAP-posted document number can be used as a "reference" when entering a new document.
Example: VENDORINVOICE#2
Your reference number should be different than the one above. Otherwise, the system will think you are entering a duplicate invoice. Please change your text slightly.
Post Document: Header Data
4. Click or the "Enter" key to proceed.
Post Document Display Overview
You are now viewing the document overview screen.
5. Double-click to open that line item.
Post Document Correct Vendor item
When you open the Vendor line item, you may change the Text field here to change what appears on the remittance advice.
6. As required, complete/review the following fields:
Field Name
R/O/C
Description
Text
O
Description field for an entry.
Example: prints on remittance advice - for second invoice
Post Document Correct Vendor item
7. Click to return to the document overview screen.
Post Document Display Overview
The document overview screen.
8. Click to post this second invoice which has the same fields as the original except a different vendor invoice number and a different remittance advice text.
Information
Pending upon your user settings, you may not get this pop up box, but just a message in the bottom left hand corner of the screen.
9. Click to close the box.
Enter Vendor Invoice: Company Code PUR
Because you used the menu (Goto Post with reference) from FB60 to access the FBR2 transaction code, you are then returned to the FB60 transaction after you have posted the invoice.
10. Another way to access FBR2 is to just type the t-code in the field at the top of the screen. As required, complete/review the following fields:
Field Name
R/O/C
Description
Transaction Code
R
A unique four-character (in most cases) identification assigned to each SAP transaction based on its purpose.
Example: /nfbr2
11. Click or the "Enter" key to proceed.
Post Document: Header Data
The FBR2 transaction code opens with the last document number entered as the default.
12. Click or the "Enter" key to proceed.
Post Document: Header Data
This time we will change the vendor number
13. Change the Reference field. As required, complete/review the following fields:
Field Name
R/O/C
Description
Reference
R
Allows for further clarification of an entry by reference to other sources of information, either internal or external to SAP. Any SAP-posted document number can be used as a "reference" when entering a new document.
Example: VENDORINVOICE
Your reference number should be different than the one above. Otherwise, the system will think you are entering a duplicate invoice. Please change your text slightly.
Post Document: Header Data
14. As required, complete/review the following fields:
Field Name
R/O/C
Description
Account
R
Unique identification number. SAP uses several kinds of accounts. SAP's general ledger accounts are similar to standard in most accounting systems. SAP also uses sub-ledger accounts for customers (accounts receivable), vendors (accounts payable), and assets (asset accounts). These sub-ledger accounts roll-up to a general ledger account.
Example: 5000129
Vendor 5000129 in DEV has withholding tax applied to it in the vendor master.
Post Document: Header Data
15. Click or the "Enter" key to proceed.
Post Document Add Vendor item
If the vendor invoice date was a date in the past, the due date for pay immediately will be in the past. You may get the above informational message to alert you of the date. If you do, just hit the "Enter" key to acknowledge it.
Enter Withholding Tax Information
Because this vendor has withholding tax information in its vendor master, you will receive this popup up box.
16. Click to accept it.
Refer to the Tax Department for more information regarding withholding tax.
Post Document Display Overview
You should now see the document overview screen. If you do not, then click on .
17. Double-click OR click to open it.
Post Document Correct Vendor item
18. As required, complete/review the following fields:
Field Name
R/O/C
Description
Text
O
Description field for an entry.
Example: change remittance advice text
Post Document Correct Vendor item
19. Click to view that Vendor's Withholding tax information again.
Enter Withholding Tax Information
If for some reason, for this invoice the vendor should not have any withholdings, you would enter a 0.00 in both the W/Tax Base and W/Tax Amt fields.
When using the FBR2 to change withholding tax amounts, you need to be very careful if using this new invoice as the "reference" invoice for the next one. For example, if you put 0.00 in both W/Tax Base and W/Tax Amt fields then if this is the reference invoice, those 0.00 amounts will automatically be applied to the next; however, you won't see the 0.00 displayed. The 0.00 will be assumed.
20. Click to close the box.
Post Document Correct Vendor item
21. Click to post the invoice.
Post Document: Header Data
Your new document number will display in the bottom left hand corner. Pending upon your user settings, you may also get a pop up box to acknowledge.
You have posted another invoice, but this time you changed the vendor ID used, the vendor invoice, and the text on the remittance advice.
Notice that the "Document Number" field now defaults to the newly posted invoice number.
Because you entered FBR2 in the transaction code field to access this screen, when you post an invoice you are returned to the beginning of the FBR2 screen. Remember, when you accessed it from the menu line of FB60? If you access it that way, you are then returned to FB60 after the Post with Reference document is posted.
22. Because you are returned to the start of FBR2 again, you may just click or the "Enter" key to proceed.
Post Document: Header Data
Now you are at the start of entering a new invoice again.
23. Click to return to the main menu without finishing the process of entering another invoice.
24. You have completed this transaction.
Result
You have posted two documents by using a reference document. This reduced the data entry required since it defaults the fields from the reference document.
Comments
Be very careful using this transaction if you change withholding tax amounts.
To see the results/calculations of discounts and withholdings, you must run F110, the Payment Program.
http://www.purdue.edu/onepurduehelp/content/fi_ap_fbr2_post_with_reference/wi/html/index.htm
Message was edited by:
Karthikeyan Pandurangan
Message was edited by:
Karthikeyan Pandurangan -
Hi,
My client is asking when they are watching GL line items display the vendor account field is blank for document type KR.
And these KR invoices are posted in TCode FB60. But I saw that there is no field to put vendor account while entering the transaction.
I checked field status group of GL, but did not find anything.
Please tell me how to add vendor account field in FB60, so that user can put it and it will display in GL line item display.
Best Regards,
Tapan PatroHi
Check this
Display Vendor Code in FBL3N GL Line Items
Thank You, -
Hello all,
I have doubt in GL. Can I get vendor information and Invoice details in GL.
Please guide me to understand...
Thanks and Regards,
MuthuHi Kevin,
Try using a screen variant using transaction SHD0. You can check for an existing variant using the program (SAPLFDCB) and screen number (70). Use the system/status menu path from FB60 to find the program if the one I provided doesn't work.
If a screen variant doesn't exist, create a new one. The available fields from the vendor master may be limited. You can research adding new ones if they are not in the list. You can hide or display existing fields.
Good luck!
KF -
Exposing MDM vendor information through the Portal
We are looking to expose certain MDM vendor information (such as; create, modify, etc) through the Portal and allow the users to update their information via the portal.
For example, vendor X will log onto the portal, they will only see their specific vendor details and will be able to modify their address, bank details, etc... through a number of iViews.
Please assume that we will be using the latest version of MDM (5.5 SP3?) and EP6.0 SP14.
My questions are:
- is there a business package that will provide us with that specific functionality?
- if not what is the best way (if it is actually possible) of exposing this functionality through the portal (I guess we would need to create a web dynpro component)?
Many thanksHi James,
We have business package for MDM SP3 with some built-in iviews, which was released in Nov/Dec 2005. They also have create/modify iviews.
But they don't have iViews to add to a qualified table. In your case for Bank details I don't think you can use the existing iviews.
Thanks
Subbu -
Add aging information to FBL1N/FBL5N
Dear FI gurus
I just want to add aging information such as 30 days/60days/90days/120days/Over120days
to line item report FBL1N and FBL5N.
Is it possible?
If custom report is required, can I use append or have to be created from scratch?
YoshiHi Yoshitada,
I would suggest go for Standard Reports e.g. :
S_ALR_87012085 - Vendor Payment History with OI Sorted List, with following selection parametter:
Vendors:
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
S_ALR_87012078 - Due Date Analysis for Open Items
Customer:
S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
S_ALR_87012168 - Due Date Analysis for Open Items
S_ALR_87012175 - Open Items - Customer Due Date Forecast -
REJECT_CODE Vendor information and/or Operating Unit information is missing
hi
i am using Oracle Applications : 11.5.10.2.
i am trying to load suppliers and suppliers data into oracle AP.
i tried doing this with some sample data.
i executed the following code below :
insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
values (*10006*,'XXX Financials2','199999','NEW');
i then ran the following process:
Supplier Open Interface Import
the supplier was added without errors
i then inserted a record into the
AP_SUPPLIER_SITES_INT table :
vendor_interface_id =*10006*,
LAST_UPDATE_DATE= SYSDATE,
LAST_UPDATED_BY ='123',
VENDOR_SITE_CODE = 'true test' ,
CREATION_DATE =SYSDATE ,
CREATED_BY ='123' ,
PURCHASING_SITE_FLAG= 'N' ,
PAY_SITE_FLAG = 'Y' ,
ATTENTION_AR_FLAG = 'N' ,
ADDRESS_LINE1 ='gmmm df' ,
ADDRESS_LINE2 ='gmmm dfdv' ,
ADDRESS_LINE3 ='gmmm dfvdd' ,
ADDRESS_LINE4 ='gmmm dfvdd' ,
PAYMENT_METHOD_LOOKUP_CODE='Check' ,
TERMS_DATE_BASIS ='Current' ,
ACCTS_PAY_CODE_COMBINATION_ID = '1365' ,
PREPAY_CODE_COMBINATION_ID = '1470' ,
PAYMENT_PRIORITY = '99' ,
TERMS_ID= '10001' ,
INVOICE_AMOUNT_LIMIT =20,
PAY_DATE_BASIS_LOOKUP_CODE = 'DISCOUNT' ,
ALWAYS_TAKE_DISC_FLAG= 'A' ,
INVOICE_CURRENCY_CODE ='JMD' ,
PAYMENT_CURRENCY_CODE ='JMD' ,
HOLD_ALL_PAYMENTS_FLAG='N' ,
HOLD_FUTURE_PAYMENTS_FLAG ='N' ,
HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
EXCLUSIVE_PAYMENT_FLAG= 'N' ,
EXCLUDE_FREIGHT_FROM_DISCOUNT = 'N' ,
ORG_ID= '142' ,
CREATE_DEBIT_MEMO_FLAG= 'N' ,
OFFSET_TAX_FLAG= 'N'
i then ran the following process:
Supplier Sites Open Interface Import
the process completes with a status of 'Normal'.
below is an extract of the output :
Supplier Sites Open Interface Import Execution Repor Page: 1
Import Options: All
Batch Size: 1000
Print Exceptions Only: No
Sites Open Interface Audit Report
Org Id Supplier Number Supplier Name Site Name
Total Sites Imported: 0
*** No Data Exists for this Report ***
Sites Open Interface Rejections Report
Org Id Supplier Number Supplier Name Site Name Reason
Total Sites Rejected: 0
when i checked the AP_SUPPLIER_SITES_INT table ,
the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
I THINK ALL THE REQUIRED FIELDS ARE POPULATED
why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
please help me to solve this ....
thanks much!!Hi,
Could you please check : Doc ID: 316368.1 of Metalink...
Symptoms_+
The Supplier Site Contacts Open Interface Import program is not importing certain contact
information.
The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
Reason:
Vendor information and/or Operating Unit information is missing
Cause_+
The Last_name field is a required field.
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
Solution_+
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
If you test this out directly in the Suppliers window in Oracle Payables:
Navigation: Suppliers-Entry
Queried up a Supplier, then clicked into the Site field under the Contact tab.
Entered the contact information and omitted the Last Name, when trying to save the record,
the system gives the following message:
*'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
field and is the intended functionality.
Hope this will help
Regards,
S.P DASH -
Vendor information and/or Operating Unit information is missing.
Hi,
I am new to the interface and learning programing can any body pls help me on this accept i will be thank full
I am running AP_SUPPLIER_SITES_INT and i got an error as
Vendor information and/or Operating Unit information is missing.
and also pls give me the diff b/w org_id and operating unit why the tables end with _all.
Thanks in advance
Thanks and regards
Goutham
Message was edited by:
goutham kondurucheck out these:
http://www.oracleappshub.com/oracle-application/_all-tl-vl-vf_vl_a_avn-and-what-else/
http://www.oracleappshub.com/beginner/understanding-multi-organization-structure-in-ebs-part-1/ -
I Need Interactive Report for displaying vendor information. Based on the s
Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.
hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b> -
How to select Vendor information as per the line item of the shopping cart
SRM ABAPers,
I want to create a custom report and needs to produce SC's item details with vendor's information.
So I want to select the vendor information(including the partner function- 00000019 or 00000039) as per the line item of the shopping cart, which SRM table can give me this information?
Thank you!
MPHi,
To get the SC item details,you an use the FM 'BBP_PD_SC_GETDETAIL".
Also to get the vendor details,you can use the FM "BBP_PARTNER_GET_PURCH_DATA_NEW".
BR,
Disha.
Pls reward points for useful answers. -
In ME2N report for PO- How to get or add Vendor name in ALV grid output
Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
PrashanthHi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth -
Vendor information for some material's is missing in the report ?
Hi,
One of my user has raised a request that the vendor information for some material is not displayed in report where as its available in ECC, now i have checked in BI that information for 20 material numbers is missing even in BI that is the reason not showing in the report. Now what do I do ? Can you please suggest.Kindly update the master data table for material and vendor.....
-
SC - Contract and vendor information disappear afeter change plant
Dear friends,
I'm using SRM 5.5 and i have the follow problem:
I create a SC using a item registered in MDM 2.0 the item has contract information and vendor information, but there is not information about plant.
The SC get the contract and vendor information but i need sometimes change the plant and when a change the plant the information about catalog and vendor disappear.
I tried use the BADI BBP_SOS_BADI to recover contract and vendor information, but in this moment i don't have how to get contract information because the catalog information disappear.
I'm using the classic scenario so i don't create contract in SRM just in backend System.
Thanks.
Roberto Aran.Hi
Could see the plant data in the SC( Ship to address/ Performance location)
BR
Muthu
Maybe you are looking for
-
How do i know if my query using SORT_AREA_SIZE or temporary tablespace ?
Good Morning Everyone ! My DB version is 10.2.0.1 I have large table exactly 3 million records. SQL> select count(*) from tab1; COUNT(*) 300000 SQL> select * from tab1 order by no DESC; sorting ... in process 300000 rows selected. in Terminal 2
-
How do you tell what sim company my iphone is
i dont know what it is because i just bought it recently off a friend and i have to activate it but i cant because it needs a sim with no code
-
Column Privilege Security Bug in Oracle 9i
There seems to be a bug in matching column privileges between VIEW and TABLE objects. In the SQL script below, this bug lets users INSERT values into columns that they do not have INSERT privileges on. (I guess that the bug would also let people UPDA
-
As per article: https://support.mozilla.org/en-US/kb/search-bar-easily-choose-your-search-engine?esab=a&as=aaq#w_re-order-search-engines Re-order search engines doesn't work for me. It always reverts back to alphabetically. It's been going on for a y
-
Macbook air superdrive compatible with macbook pro
i have the macbook pro laptop. is the macbook air superdrive compatible with this? iam using a external drive atm but it was not an apple product. my computer has been upgraded this is the reason for the external drive. can anyone advise? thanx T