Add WaterMarkFrom File with 0 points from top leaving some space in the top
Hi,
I tried to add a water mark image from a file with 0 points from the top. But still it is having some extra space on the top.
The issue is that I need to place a text and an image at same vertical position from the top of pdf. But image leaves some extra space.
Can you please help me with this
Thanks,
VKP1
I cannot duplicate your experience. When I add a watermark from a file, and
the file has content that fills the page completely, I do not see any white
space between the top or the left edge when I place it at the top left
corner, with 0pt offset.
How are you placing the watermark?
Karl Heinz Kremer
PDF Acrobatics Without a Net
[email protected]
http://www.khkonsulting.com
Similar Messages
-
how can i add new files to my ipod touch from a diferent computer without losing the added files already on my ipod?
Email them? Use DropBox? What type of files?
-
I have synced a new computer with the ipad and the photos have been transferred as a file with no exstention. I cannot view them on the computer but can on the ipad.
Well I forget the exact keys, but believe pressing and holding down CTRL before clicking Restore will allow you to browse and find the backup file (may be wrong).
In the end, as far as the iPhone thinks, it is a new computer so it will erase and resync stuff and as long as you loaded everything back into iTunes all should sync back. Main issue is other stuff like the data within the apps, notes, etc that are part of the backup which is why you would want to try to restore from the backup. If you don't mind losing data in apps (eg: do you care you have to relog into some apps and start over, don't care about game scores, etc) then you don't have to worry about the backup. If you have important data in some of those apps then you will need to restore from the backup. -
Pdf-file with clickable links from iweb 09
How can I create a pdf-file with clickable links from a website created in iweb 09?
All iwork apps have an export button, which fulfills this task, but iweb does not.
Any idea?I am running 10.5.6 on a MacBook Pro 2.53 GHz. I create my PDFs via the print dialogue. I tried to create a PDF from iweb with Hyperlinks activated and all links are dead. I tried to create the PDF from the Safari window, were all links are active, and – funny enough – sometimes all, sometimes half of my links are dead. But most of them do not work. As soon as I create PDFs from third party sites, everything works fine.
-
How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?
Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note -
When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?
FCE can use DV or AIC video formats natively. Any other format will need to be converted to one of those two if you want to avoid constant rendering. The clips you use must match the Sequence settings.
-DH -
QueryException[not from this UnitOfWork object space, but the parent]
It seems our system trigger more exceptions QueryException[not from this UnitOfWork object space, but the parent] under memory constraint when we are using weak reference for session cache. Anybody has a clear explanation on how memory and weak reference could have an impact on TopLink validation?
[3/1/07 23:39:00:466 EST] 123653 RegisteredSyn E WTRN0074E: Exception caught from before_completion synchronization operation: Local Exception Stack:
Exception [TOPLINK-6004] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException
Exception Description: The object [Error Code ID: 946
Error Code: 0223
Severity Level 8
Error MessageFUTURE EFFECTIVE DATE NOT ALLOWED
], of class [class com.saic.ct.sys.domain.pms.error.reference.ECMErrorCode], with identity hashcode (System.identityHashCode()) [27,525,235],
is not from this UnitOfWork object space, but the parent session's. The object was never registered in this UnitOfWork,
but read from the parent session and related to an object registered in the UnitOfWork. Ensure that you are correctly
registering your objects. If you are still having problems, you can use the UnitOfWork.validateObjectSpace() method to
help debug where the error occurred. For more information, see the manual or FAQ.
at oracle.toplink.exceptions.QueryException.backupCloneIsOriginalFromParent(QueryException.java:186)
at oracle.toplink.publicinterface.UnitOfWork.getBackupClone(UnitOfWork.java:1797)
at oracle.toplink.publicinterface.UnitOfWork.calculateChanges(UnitOfWork.java:486)
at oracle.toplink.publicinterface.UnitOfWork.commitToDatabaseWithChangeSet(UnitOfWork.java:1362)
at oracle.toplink.publicinterface.UnitOfWork.issueSQLbeforeCompletion(UnitOfWork.java:2840)
at oracle.toplink.publicinterface.UnitOfWork.issueSQLbeforeCompletion(UnitOfWork.java:2820)
at oracle.toplink.transaction.AbstractSynchronizationListener.beforeCompletion(AbstractSynchronizationListener.java:96)
at oracle.toplink.transaction.JTASynchronizationListener.beforeCompletion(JTASynchronizationListener.java:55)
at com.ibm.ws.Transaction.JTA.RegisteredSyncs.distributeBefore(RegisteredSyncs.java:137)
at com.ibm.ws.Transaction.JTA.TransactionImpl.internalPrepare(TransactionImpl.java:1254)
at com.ibm.ws.Transaction.JTA.TransactionImpl.commit(TransactionImpl.java:991)
at com.ibm.ws.Transaction.JTA.TranManagerImpl.commit(TranManagerImpl.java:150)
at com.ibm.ws.Transaction.JTA.TranManagerSet.commit(TranManagerSet.java:177)
at com.ibm.ejs.csi.TranStrategy.commit(TranStrategy.java:735)
at com.ibm.ejs.csi.TranStrategy.postInvoke(TranStrategy.java:168)
at com.ibm.ejs.csi.RequiresNew.postInvoke(RequiresNew.java:88)
at com.ibm.ejs.csi.TransactionControlImpl.postInvoke(TransactionControlImpl.java:570)
at com.ibm.ejs.container.EJSContainer.postInvoke(EJSContainer.java:3068)
at com.saic.ct.sys.svc.job.EJSLocalStatelessJobSvcEJB_c3d9335e.processPLTR(Unknown Source)
at com.saic.ct.sys.svc.pms.PmsSvcEJB.processPltrEventsUsingJobSvc(PmsSvcEJB.java:6170)
at com.saic.ct.sys.svc.pms.EJSLocalStatelessPmsSvcEJB_0afdd20f.processPltrEventsUsingJobSvc(Unknown Source)
at com.saic.ct.sys.svc.agent.pms.PltrAgent.execute(PltrAgent.java:41)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.saic.ct.sys.pms.PmsDataProcessor.invokeServiceAgent(PmsDataProcessor.java:462)
at com.saic.ct.sys.pms.PmsDataProcessor.processAllMessages(PmsDataProcessor.java:281)
at com.saic.ct.sys.pms.PmsDataProcessor.processData(PmsDataProcessor.java:183)
at com.saic.ct.sys.pms.RespondMDB.onMessage(RespondMDB.java:51)
at com.ibm.ejs.jms.listener.MDBWrapper$PriviledgedOnMessage.run(MDBWrapper.java:211)
at com.ibm.ws.security.util.AccessController.doPrivileged(AccessController.java:56)
at com.ibm.ejs.jms.listener.MDBWrapper.callOnMessage(MDBWrapper.java:200)
at com.ibm.ejs.jms.listener.MDBWrapper.onMessage(MDBWrapper.java:178)
at com.ibm.mq.jms.MQSession.run(MQSession.java:1588)
at com.ibm.ejs.jms.JMSSessionHandle.run(JMSSessionHandle.java:924)
at com.ibm.ejs.jms.listener.ServerSession.connectionConsumerOnMessage(ServerSession.java:752)
at com.ibm.ejs.jms.listener.ServerSession.onMessage(ServerSession.java:527)
at com.ibm.ejs.jms.listener.ServerSession.dispatch(ServerSession.java:494)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.ibm.ejs.jms.listener.ServerSessionDispatcher.dispatch(ServerSessionDispatcher.java:37)
at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:91)
at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:936)I am not sure that particular error has anything to do with weak references.
That just shows you are not working with clones throughout in your transaction. You are mixing server session objects with clones. Can you post your unit of work code? -
Can anyone tell me how to delete previous "keep file" files? Im trying to free up some space on my mac.
You can upgrade to Mavericks free, just run the App Store program and search for Mavericks. But before you do upgrade I recommend the following:
1) make sure you have a recent backup. TimeMachine is fine.
2) Mavericks is somewhat more memory hungry than 10.7 was. You will need 4 GB of RAM and I strongly recommend 8 GB.
Go back to the Apple menu and select About this Mac - look under the OS info you just looked at. You'll see how much RAM your computer has now. Then click on the More Info button. There you will see your computer info listed as in: iMac, 21.5" mid 2010, for example. Return back with that information and we can tell you how far the computer can be upgraded.
If you decide to procede and you have enough RAM upgrading to Mavericks is quite simple. Click on the download button and let it do its job. -
Only Able To Add One File At A Time From Mapped SharePoint (2013) Drive to Outlook (2010) E-mail
I am using SharePoint 2013. I have mapped several network drives. When adding files off SharePoint to an Outlook email, I can only add one file at a time. I can add multiple files IF they are not on SharePoint (e.g., stored locally, or on Dropbox); Previously,
when using SharePoint 2010, I was able to upload multiple files.
ANy advice?
Thanks.Hi,
There are two methods to add multiple files from SharePoint library to outlook emails:
Sync SharePoint library to outlook via “Connect to Outlook”, then you will find SharePoint Lists in outlook. Locate the library folder, you could select multiple items and drag them to an email.
Open SharePoint library via “Open with Explorer”, then you could selected multiple files and drag them to an email.
Regards,
Rebecca Tu
TechNet Community Support -
"Cannot find file" with "!" point
I have read a reply to this same problem by Katrina which identifies a way to open the old library, but her description is too technical for me to follow to conclusion and eliminate the problem. In short, I am getting a version of my library with exclamation points which will not allow me to add new MP3 files to my player. Can someone please,....please,....post a detailed reply with a step by step means to eliminate this annoying problem, thank you
Several ways to Clean Up Your Library by Finding &/or Removing Broken ("!" )or ‘dead links’ within iTunes:
If you move, edit, delete or otherwise change a music file listed in the iTunes Library with a program or tool other than iTunes, you may end up with a "!" in front of the song name or a message like “the original file could not be found. Would you like to locate it?" *It is important to note that iTunes does not keep track of music file changes made outside of iTunes.*
This can also happen if you store some/all of your music on an External HD (ExHD) that is not permanently mapped to a specific drive letter. Attaching another external connection (USB Flash Pen, Camera, etc.) can take that drive letter and move your ExHD down the alphabet. iTunes will get lost when this happens. Bet to initially mount any iTunes music ExHD further down the alphabet – say L: (for Lossless) or M: (for Music). This way, your ExHD drive designation should not inadvertently change.
See these Threads for ways of finding &/or removing the Broken Links:
http://discussions.apple.com/message.jspa?messageID=818692#818692
http://discussions.apple.com/message.jspa?messageID=607582
EASIER:
Download this to your Desktop: http://ottodestruct.com/itunes/FindDeadTracks.txt (right-click, save-link-as)
and this, as well: http://ottodestruct.com/itunes/RemoveDeadTracks.txt (right-click, save-link-as)
Rename each to FindDeadTracks.js & RemoveDeadTracks.js respectively.
Run iTunes.
1) While iTunes is running, double click FindDeadTracks.js to run the script.
It will give you a list of all the exclamation marked tracks.
2) While iTunes is running, double click RemoveDeadTracks.js to run the script.
It will remove all the exclamation marked tracks.
One step, no fuss, no muss.
Then, give Otto42 a big 'Thanks' for this one.
Best of Luck -
Links to PDF files with relative paths from a Captivate 4 project
I'm creating a presentation in Captivate 4 (I'm making an exe file) with some links to PDF files; the links are buttons with the 'open URL or file' set. The presentation will be distributed in CDs and obviously the links will not work for they point to an absolute path in my PC. Is there another way to display external files? thanks
"file:\file folder\filename" is not a relative path. It's still an absolute path because you're specifying the path all the way from the root drive, whether you used a drive letter or not.
A relative path shows where to find the other file in relation to the file that is calling it.
Relative paths look like this:
myDoc.doc (if the file is in the same directory as the file calling it)
folderName/myDoc.doc (if the file is inside a folder in the same directory as the file calling it)
../myDoc.doc (if the file is located in the parent directory above the file that is calling it)
../../myDoc.doc (if the file is located two levels above the file that is calling it)
etc
Here's a tutorial that explains it better: http://www.communitymx.com/content/article.cfm?cid=230ad -
File with exlamation point and more....
I just recieved a used ipod from my friend a couple of days ago, it was working and he was listening to it and everything and now all it does is restart when ever you move it, i dont even have to touch any of the buttons and it just comes up with the apple logo. Following the apple logo i get the stupid file with the exclamation point, i have tried connecting it to my computer but my computer will not recognize it. I have windows XP and i dont have the disc that came with the ipod because my friend had had the ipod for a long time and had already thrown it away. Im trying to give this ipod to another friend for her birthday and really need to fix my problem fast and nothing seems to work. Its a fifth generation ipod and when i go to charge it it doesn't even show that its charging what do i do?
See these.
iPod shows a folder icon with exclamation point after disconnecting.
iPod shows a folder icon with exclamation point when you turn it on. -
Loading huge file with Sql-Loader from Java
Hi,
I have a csv file with aprox. 3 and a half million records.
I load this data with sqlldr from within java like this:
String command = "sqlldr userid=" + user + "/" + pass
+ "@" + service + " control='" + ctlFile + "'";
System.out.println(command);
if (System.getProperty("os.name").contains("Windows")) {
p = Runtime.getRuntime().exec("cmd /C " + command);
} else {
p = Runtime.getRuntime().exec("sh -c " + command);
}it does what I want to, load the data to a certain table, BUT it takes too much time, Is there a faster way to load data to an oracle db from within java?
Thanks, any advice is very welcomeHave your DBA work on this issue - they can monitor and check performance of SQL*Loader
SQL*Loader performance tips [Document 28631.1]
SQL*LOADER SLOW PERFORMANCE [Document 1026145.6]
Master Note for SQL*Loader [Document 1264730.1]
HTH
Srini -
How to add custom columns with BO data from GP to UWL
Hi
We have CE 7.1 in our project UWL taskitems only have GP workflow tasks.
In UWL we can see that by default there are standard columns but now we need to add custom columns with data from ours BO associated to process instance
For that we need to develop one custom connector for UWL where we can retrieve the values from custom conenctor to UWL.
Currently our NWDS 7.1 does not have plugins for UWL Connector can anybody tell me where can I download this plugins?
thanks in advance!
Regards
CristianHi,
plz refer the following link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ee5047-c7a0-2a10-70b7-9557e3e4d440
Regards
Manohar -
Opening a file with its filename from a servlet- avoid buffer to cach files
Hi,
I am building an URL with the following code and calling that particular file from this servlet using request dispatcher. When I am geting alcCode from getParameter method then it is not caching the pages
but when I am geting the same through a session value it starts caching the page after cirtain number of requests and shows up the previously requested file.
I guess it is because it always names the file with the package name.
for example if my package is sree then the file opened is named as
sree[1].pdf. Please help me solve this problem
alcCode = req.getParameter("alcList");
HttpSession userSession= req.getSession(false);//if request is from //submit action from a FORM
String alcCode;
alcCode = req.getParameter("alcList");
System.out.println("request.getparameter alcCode "+alcCode);
if (alcCode==null){
alcCode= (String) userSession.getValue("alcCode");
//else get the alc code from the session that has been stored
Calendar todaysDate=Calendar.getInstance();
int selectMonth=todaysDate.get(Calendar.MONTH);
int selectYear=todaysDate.get(Calendar.YEAR);
if(selectMonth <10)
//selectMonth = InvoiceDate.substring(1,i-8);
urlPdf="/reports/RPTS"+selectYear+"0"+selectMonth+"/PDF-FORMAT/E"+selectYear+"0"+selectMonth+"_"+alcCode+".PDF";
}else{
urlPdf="/reports/RPTS"+selectYear+selectMonth+"/PDF-FORMAT/E"+selectYear+selectMonth+"_"+alcCode+".PDF";
res.setContentType("application/pdf");
res.reset();
res.resetBuffer();
res.setHeader("Content-disposition","attachment; filename" +urlPdf );
System.out.println(urlPdf);
try{
ServletContext sc = getServletContext();
RequestDispatcher rd = sc.getRequestDispatcher(urlPdf);
rd.forward(req, res);
Thanks in advance.
-Sreekanth VaridhireddyI had a similar problem when I used the attachment argument to the Content-Disposition header.
try replacing this:
res.setHeader("Content-disposition","attachment; filename" +urlPdf );
with this:
res.setHeader("Content-Disposition","inline; filename=" +urlPdf );
/Niklas
Maybe you are looking for
-
How can i delete my Icloud account, when i dont remember the email?
Hi! I restarted my iphone, but now i cant access apple store because my iphone is logged in to an old icloud account with [email protected]. I cant answer the security questions, and i dont now the email to that account. Please Help.
-
TS1314 I need to transfer Ebooks from PC to my IPad...not familiar with syncing. Thks
I need to be able to transfer Ebooks from my PC to my IPad...also need help in syncing from PC to IPad. I have downloaded ITunes to my PC. Using Windows.Thanks. Mazda167
-
this problem started yesterday. it now happens every time i start firefox. if i close the security warning window fire fox seems to run ok.
-
"Apps" section of my iPod disabled in iTunes
I have a 3G iPod Touch, that works very well, I restored it last week (from last backup), and now, when I go on iTunes to sync new apps, the "Apps" section is disabled, I can not check or uncheck "Sync apps", I can not manage and rearrange my apps fr
-
"Directory Listing Denied This Virtual Directory does not allow contents to be listed."