Add Z-fields in dynamic selection of FBL1N
Hello experts,
I'm trying to add some Z*-fields from table BKPF in the dynamic selections of logical database KDF.
In fact, and referring to some hints posted in the forum, I copied the standard selection view 'SAP' to 'CUS' and then added a new functional group and then assign the fields (table BKPF) to this functional group.
The Z-fields are also added in SM30 V_T021S.
The fields are not available in BSIK, so maybe there is where the problem lies.
Could you please advice?
Kind regards,
Isabel
Hi,
I already did this in SE36. The problem is that my Z-fields do not appear in BSIK. They appear only in BKPF... And in SE36 if I try to select the Z-fields in BKPF, they do not appear in the dynamic selections.
Thanks for your answer. Kind regards,
Isabel
Similar Messages
-
Include new field in dynamic selection in fbl1n
Hi Guys,
I want to add a new field in dynamic selection in tcode FBL1N.
Regards,
H.SathiskumarHi Sathiskumar,
Here are general instructions for adding new fields to the dynamic selection:
1) Call Transaction SE36
2) Enter logical database DDF, KDF or SDF (for FBL5N, FBL1N, FLB3N)
3) Menu -> Extras -> selection views
4) Here you can find 2 origins of the view (SAP and CUS).
The standard view SAP is used. Create your own using view CUS. First copy the view SAP.
On the left side are the functional groups.
01 Customer master => fields from table KNA1
02 Company code => fields from table KNB1
03 Documents => fields from table BSID
Only those fields from these tables can be used for dynamic selection
5) To get another field from e.g. table KNB1 for the dynamic selection double click on the right side on
table KNB1. The field in the lower area will be changed. Search for the desired field and enter a 03
in front of the field. Save.
6) Test in your report.
Note: Not every table and field can be used as dynamic selection. It is also necessary that the report
allows selection for that field."
Furthermore I suggest You to have a look at the note number 310886 that can be useful.
Customers: logical database: DDF
Permitted tables:
KNA1, KNB1: All fields are permitted that are contained in the VF_DEBI view. If necessary, you have to
include additional fields in the view fields category using Transaction SE11.
I hope this information may help you in resolving the reported issue.
Regards,
Emoke -
Add certain field at dynamic selection screen in FBL3N transaction
Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris KimHi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n -
How to add a field in dynamic selections
HI,
There is a requirement in which i need to add a field in existing program of dynamic selections.
I have added a field in the screen.But I was not able to write the label and is not displaying.
I ahve copied evrything from existing coding.but still.
In the program ,Field groups are being used.
I have inserted my field in that header and item of field groups.
But i was not able to select the data based on this selection.
i will attach my code here for reference.
can anyone please help me how to use these filed symbols.
If possible send me the document on Dynamic selections.
the field i need to add is bkpf-bktxt
TABLES:
tcurx,
lfa1,
kna1,
bhdgd,
bkpf,
bseg,
bsega,
b0sg,
fimsg,
sarkey,
t001,
vbset,
sscrfields.
Selektionsparameter *
begin_of_block 1.
PARAMETERS:
par_nbel LIKE rfpdo-bpetnbel, "Normale Belege
par_vbel LIKE rfpdo-epojvbel, "Vorerfaßte Belege
par_sbel LIKE rfpdo-bpetsbel, "Statistischen Belege
par_mbel LIKE rfpdo-epojmbel, "Musterbelege
par_dbel LIKE rfpdo1-korbdbel. "Dauerbuchungsurbelege
end_of_block 1.
begin_of_block 2.
PARAMETERS:
par_summ LIKE rfpdo1-allgsumm, "nur Summenausgabe
par_hkto LIKE rfpdo2-beljhkto, "Hauptbuch- statt Personenkonto
par_altk LIKE rfpdo1-allgaltk, "alternative Kontonummer
par_lsep LIKE rfpdo-allglsep, "Listseparation
par_mikf LIKE rfpdo-allgmikf, "Mikrofiche-Zeile
par_line LIKE rfpdo1-allgline. "Zusatztitel
Eingaben für optische Archivierung
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: arc LIKE rfpdo1-allgarch.
SELECTION-SCREEN COMMENT 3(29) text-103 FOR FIELD arc.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg1(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg2(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
end_of_block 2.
PARAMETERS: arc_mem LIKE arc_params NO-DISPLAY.
Felder und Feldleisten *
CONSTANTS:
con_true TYPE i VALUE 1,
con_false TYPE i VALUE 2,
con_hash TYPE i VALUE 1,
con_vendor TYPE c VALUE 'K',
con_cust TYPE c VALUE 'D'.
Global Data
DATA: BEGIN OF hash_totals OCCURS 25,
bukrs LIKE t001-bukrs,
poper(7),
dramt LIKE bseg-wrbtr,
cramt LIKE bseg-wrbtr,
END OF hash_totals.
DATA:
factor TYPE i,
Zähler
cnt_bukrs(4) TYPE p, "Anzahl Buchungskreise
cnt_max LIKE sy-tfill, "Maximum der CNT_Ti
cnt_t0 LIKE sy-tfill, "Anzahl Einträge in Ti
cnt_t1 LIKE sy-tfill,
cnt_t2 LIKE sy-tfill,
cnt_t3 LIKE sy-tfill,
cnt_t4 LIKE sy-tfill,
cnt_t5 LIKE sy-tfill,
Fehler
err_altkt(1) TYPE c, "alt. Kontonummer nicht gefunden
Flags
flg_section TYPE i,
flg_vendr2 TYPE i,
flg_vendr3 TYPE i,
flg_color(1) TYPE n, "0 - intensified off
Hilfsfelder
hlp_belnr(10) TYPE c, "Anzeigefeld Belegnummer
hlp_bstat LIKE bkpf-bstat, "Status vorerfaßter Belege
hlp_buper(7) TYPE c, "Buchungsperiode mit '/'
hlp_null(1) TYPE p VALUE 0, "Betrag Null
hlp_sakan LIKE ska1-sakan, "Anzeigefeld Kontonummer
hlp_wrshb(26) TYPE c, "FW-Betrag mit Währung in Klammer
hlp_vnd_amt(43) TYPE c,
Texte
txt_line0(132) TYPE c, "Überschriften
txt_line1(132) TYPE c,
txt_line2(132) TYPE c,
txt_line(132) TYPE c, "Hilfstext
Feldleisten
BEGIN OF mikfi, "Information Mikrofiche-Zeile
bstat LIKE bkpf-bstat,
bukrs LIKE bkpf-bukrs,
gjahr LIKE bkpf-gjahr,
belnr LIKE bkpf-belnr,
END OF mikfi.
Interne Tabellen *
DATA:
Belegkopfinformationen
BEGIN OF t0 OCCURS 4, "0 - allgemeine Angaben
info(1) TYPE n, "1 - vorerfaßter Beleg
END OF t0, "2 - Referenz
"3 - Storno
"4 - gelöschter vorerfaßter Beleg
"5 - ersetzter vorerfaßter Beleg
"6 - Ausgleichsbeleg
"7 - zurückgenommener Ausgleich
Personenkonteninformationen je Beleg
BEGIN OF t1 OCCURS 10,
koart LIKE bseg-koart, "Kontoart
ktonr LIKE bseg-kunnr, "Kontonummer(Debitor/Kreditor)
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
zlspr LIKE bseg-zlspr, "Payment Block Key - CR 21709
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
wrshb LIKE bsega-dmshb, "Betrag in Fremdwährung
xfwae(1) TYPE c, "X - Fremdwährungsinformation
name1 LIKE lfa1-name1, "Customer/ Vendor Name
END OF t1,
Steuerinformationen je Beleg
BEGIN OF t2 OCCURS 10,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
END OF t2,
Sachkonteninformationen je Beleg
BEGIN OF t3 OCCURS 20,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
koart LIKE bseg-koart, "Kontoart
hkont LIKE bseg-hkont, "Hauptbuchkonto
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
kostl LIKE bseg-kostl, "Cost Center
prctr LIKE bseg-prctr, "Profit Center
END OF t3,
Sonderhauptbuchbeträge für Debitoren (nur Ausgabe)
BEGIN OF t4 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t4,
Sonderhauptbuchbeträge für Kreditoren (nur Ausgabe)
BEGIN OF t5 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t5,
Summeninformationen je Buchungskreis
BEGIN OF tbukrs OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs,
Sonderhauptbuchinformationen je Buchungskreis
BEGIN OF tbukrs_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs_u,
Summeninformationen je Hauswährung
BEGIN OF twaers OCCURS 10,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Hauswährungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers,
Sonderhauptbuchinformationen je Hauswährung
BEGIN OF twaers_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Währungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers_u,
Fehlerprotokoll im Batch
BEGIN OF tfimsg OCCURS 10.
INCLUDE STRUCTURE fimsg.
DATA END OF tfimsg.
Strukturen für optische Archivierung *
DATA BEGIN OF info OCCURS 10.
INCLUDE STRUCTURE bhinf.
DATA END OF info.
DATA:
arc_save LIKE arc_params,
arc_valid.
Feldgruppen *
FIELD-GROUPS: header, daten.
INSERT:
bkpf-bukrs "Buchungskreis
bkpf-bktxt "Change by OS0794
bkpf-bstat "Belegstatus
bkpf-gjahr "Geschäftsjahr
bkpf-belnr "Belegnummer
bseg-buzei "Buchungszeile
INTO header.
INSERT
bkpf-blart "Belegart
bkpf-bktxt "Change by OS0794
bkpf-budat "Buchungsdatum
bkpf-stblg "Stornobelegnummer
bkpf-waers "Währungsschlüssel
bkpf-xblnr "Referenzangabe
bseg-bschl "Buchungsschlüssel
bseg-xnegp "Negativbuchung
bseg-zlspr "Payment Block Key - CR 21709
bseg-hkont "Hauptbuchkonto
bseg-koart "Kontoart
bseg-kunnr "Debitornummer
bseg-lifnr "Kreditornummer
bseg-mwart "Mehrwertsteuerart (A oder V)
bseg-mwskz "Mehrwertsteuerkennzeichen
bseg-umskz "Sonderhauptbuch-Kennzeichen
bsega-dmshb "S/H-Betrag in Hauswährung
bsega-mdshb "Umsatzsteuerbetrag in Hauswährg
bsega-wrshb "S/H-Betrag in Fremdwährung
hlp_bstat "Status vorerfaßter Belege bzw.
bseg-kostl
bseg-prctr
bkpf-monat
INTO daten. "Status von Belegen ohne Zeilen
Vorschlagswerte *
INITIALIZATION.
get_frame_title: 1,2.
par_nbel = 'X'.
par_sbel = space.
par_mbel = space.
par_dbel = space.
par_vbel = 'X'.
Archivinformationen nur fuer Ausgabe *
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'ARC'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Prüfung und Korrektur der eingegebenen Daten *
AT SELECTION-SCREEN ON arc.
IF arc <> ' ' AND arc_mem(20) = space.
CALL FUNCTION 'GET_ARCHIVE_PARAMETERS'
EXPORTING
in_parameters = arc_save
printer = ' '
IMPORTING
out_parameters = arc_mem
valid = arc_valid
EXCEPTIONS
OTHERS = 04.
IF arc_valid <> 'X' OR arc_mem = space.
CLEAR arc_mem.
MESSAGE e999 WITH text-102.
ENDIF.
arc_msg1 = arc_mem(10).
arc_msg2 = arc_mem+10(10).
ENDIF.
IF arc = ' '.
CLEAR arc_mem.
arc_msg1 = arc_msg2 = space.
ENDIF.
arc_save = arc_mem.
AT SELECTION-SCREEN ON arc_msg1.
arc_msg1 = arc_mem(10).
AT SELECTION-SCREEN ON arc_msg2.
arc_msg2 = arc_mem+10(10).
AT SELECTION-SCREEN.
IF par_nbel EQ space AND
par_mbel EQ space AND
par_dbel EQ space AND
par_sbel EQ space AND
par_vbel EQ space.
SET CURSOR FIELD 'PAR_NBEL'.
MESSAGE e111.
ENDIF.
optische Archivierung
IF arc <> ' ' AND par_mikf <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-100.
ENDIF.
IF arc <> ' ' AND par_lsep <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-101.
ENDIF.
IF arc = 'X' AND sscrfields-ucomm = 'PRIN'.
sscrfields-ucomm = 'ONLI'.
sy-pdest = 'LP01'. "wegen Abfrage in Batch-Heading
ENDIF.
Vorbelegungen *
START-OF-SELECTION.
bhdgd-lines = sy-linsz.
bhdgd-repid = sy-repid.
bhdgd-uname = sy-uname.
bhdgd-separ = par_lsep.
bhdgd-domai = 'BUKRS'.
IF arc = 'X'.
bhdgd-miffl = 'A'.
ENDIF.
IF par_mikf = 'X'.
bhdgd-miffl = 'X'.
ENDIF.
Initialisierung für optisches Archiv
PERFORM open_archive(rsbtchh0) USING arc_mem.
info-name = 'BKPF-BSTAT'. info-len = space. APPEND info.
info-name = 'BKPF-BUKRS'. info-len = space. APPEND info.
info-name = 'BSEG-GJAHR'. info-len = space. APPEND info.
info-name = 'BKPF-BELNR'. info-len = space. APPEND info.
info-name = 'BKPF-BKTXT'. info-len = space. APPEND info.
PERFORM start_archive(rsbtchh0) TABLES info.
b0sg-xstan = par_nbel.
b0sg-xstam = par_mbel.
b0sg-xstad = par_dbel.
b0sg-xstas = par_sbel.
b0sg-xstaa = 'X'.
IF par_vbel EQ 'X'.
b0sg-xstav = 'Z'.
ENDIF.
Selektion *
GET bkpf FIELDS blart bstat budat monat stblg waers xblnr bktxt.
CLEAR hlp_bstat.
IF 'ABVWZ' CA bkpf-bstat.
hlp_bstat = bkpf-bstat.
CLEAR bkpf-bstat.
IF 'ABWZ' CA hlp_bstat.
CLEAR: bseg, bsega.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDIF.
ENDIF.
GET bseg.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
GET bkpf LATE.
PERFORM vorerfasste_steuer_merken.
Seitenkopf *
TOP-OF-PAGE.
PERFORM batch-heading(rsbtchh0).
ULINE.
IF flg_section <> con_hash.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE / txt_line0.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / txt_line1,
/ txt_line2.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: / sy-vline NO-GAP,
'Hash Totals'(205),
132 sy-vline.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / sy-vline NO-GAP,
(10) 'CoCd'(200),
(07) 'Period'(201),
sy-vline,
(16) 'Debit Amount'(202),
(16) 'Credit Amount'(203),
sy-vline,
(16) 'Total'(204).
ENDIF.
ULINE.
Sortieren der Daten *
END-OF-SELECTION.
DESCRIBE TABLE tbukrs LINES sy-tfill.
IF sy-tfill EQ 0.
CALL FUNCTION 'POPUP_NO_LIST'.
ENDIF.
SORT.
SORT tbukrs.
Belegjournal *
LOOP.
*-- Neuer Buchungskreis -
AT NEW bkpf-bukrs.
SELECT SINGLE * FROM t001 WHERE bukrs EQ bkpf-bukrs.
IF sy-subrc NE 0.
IF sy-batch EQ space.
MESSAGE a101 WITH bkpf-bukrs.
ELSE.
MESSAGE s101 WITH bkpf-bukrs.
STOP.
ENDIF.
ENDIF.
bhdgd-bukrs = bkpf-bukrs.
bhdgd-werte = bkpf-bukrs.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '5'.
ENDAT.
*-- Neuer Belegstatus -
AT NEW bkpf-bstat.
PERFORM new_page USING bkpf-bstat.
flg_color = 1.
ENDAT.
*-- Neue Belegnummer -
AT NEW bkpf-belnr.
REFRESH: t0, t1, t2, t3.
PERFORM belegkopf_merken.
mikfi-bstat = bkpf-bstat.
mikfi-bukrs = bkpf-bukrs.
mikfi-gjahr = bkpf-gjahr.
mikfi-belnr = bkpf-belnr.
bhdgd-grpin = mikfi.
ENDAT.
*-- Belegzeile -
PERFORM belegzeile_merken.
*-- Ende einer Belegnummer -
AT END OF bkpf-belnr.
PERFORM beleg_schreiben.
ULINE.
ENDAT.
*-- Ende eines Buchungskreises -
AT END OF bkpf-bukrs.
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING bkpf-bukrs.
ENDAT.
ENDLOOP.
Summenblätter *
bhdgd-bukrs = ' '.
bhdgd-werte = ' '.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING ' '.
PERFORM hauswaehrung_schreiben.
Print Hash Totals *
flg_section = con_hash.
NEW-PAGE.
PERFORM prt_hash TABLES hash_totals.
Fehlerprotokoll *
CALL FUNCTION 'FI_MESSAGE_CHECK'
EXCEPTIONS
no_message = 4.
IF sy-subrc = 0.
IF sy-batch EQ space.
PERFORM titel_fuellen USING '6'.
NEW-PAGE.
FORMAT COLOR 6 INTENSIFIED.
CALL FUNCTION 'FI_MESSAGE_SORT'.
CALL FUNCTION 'FI_MESSAGE_PRINT'
EXPORTING
i_xskip = 'X'.
ELSE.
CALL FUNCTION 'FI_MESSAGE_GET'
TABLES
t_fimsg = tfimsg.
LOOP AT tfimsg.
MESSAGE ID tfimsg-msgid TYPE tfimsg-msgty NUMBER tfimsg-msgno
WITH tfimsg-msgv1 tfimsg-msgv2 tfimsg-msgv3 tfimsg-msgv4.
ENDLOOP.
ENDIF.
ENDIF.
U N T E R P R O G R A M M E *
0. TITEL_FUELLEN *
1. NEW_PAGE *
2. SUMME_MERKEN *
3. VORERFASSTE_STEUER_MERKEN *
4. BELEGKOPF_MERKEN *
5. BELEGZEILE_MERKEN *
6. BELEG_SCHREIBEN *
7. BUCHUNGSKREIS_SCHREIBEN *
8. HAUSWAEHRUNG_SCHREIBEN *
9. SUMMENZEILE_SCHREIBEN *
10. KONTONUMMER *
0. FORM TITEL_FUELLEN *
Ersetzt das Global &CCCU durch die Buchungskreiswährung *
F00_TEXT ist 4, 5 oder 6, je nach Gruppe der Textelemente *
FORM titel_fuellen USING f00_text.
DATA:
BEGIN OF txt_502,
T1(49) TYPE C, "CR 21709
W1(23) TYPE C, "CR 21709
t1(50) TYPE c, "CR 21709
w1(22) TYPE c, "CR 21709
t2(6) TYPE c,
w2(15) TYPE c,
t3(21) TYPE c,
w3(16) TYPE c,
t4(2) TYPE c,
END OF txt_502.
CASE f00_text. "Textelemente
WHEN '4'. "- für die Summenliste
txt_line0 = text-400.
txt_line1 = text-401.
txt_line2 = text-402.
WHEN '5'. "- für die Einzelpostenliste
txt_line0 = text-500.
txt_line1 = text-501.
txt_line2 = text-502.
IF par_hkto EQ 'X'.
txt_line1+33(10) = text-505.
txt_line2+33(10) = text-506.
ENDIF.
txt_502 = txt_line2.
REPLACE '&CCCU' WITH t001-waers INTO:
txt_502-w1, txt_502-w2, txt_502-w3.
CONDENSE:
txt_502-w1, txt_502-w2, txt_502-w3.
WRITE:
txt_502-w1 TO txt_502-w1 RIGHT-JUSTIFIED,
txt_502-w2 TO txt_502-w2 RIGHT-JUSTIFIED,
txt_502-w3 TO txt_502-w3 RIGHT-JUSTIFIED.
txt_line2 = txt_502.
WHEN '6'. "- für die Fehlerliste
txt_line0 = text-600.
txt_line1 = text-601.
txt_line2 = space.
WHEN OTHERS. "- initialisieren
txt_line0 = space.
txt_line1 = space.
txt_line2 = space.
ENDCASE.
ENDFORM. "TITEL_FUELLEN
1. FORM NEW_PAGE *
Initialisierungen für BATCH-HEADING Routine *
F01_BSTAT steuert den Aufbau des Reporttitels *
FORM new_page USING f01_bstat.
CASE f01_bstat. "Reporttitel
WHEN 'D'. "- für Dauerbuchungsurbelege
bhdgd-line1 = text-001.
WHEN 'M'. "- für Musterbelege
bhdgd-line1 = text-002.
WHEN 'S'. "- für statistische Belege
bhdgd-line1 = text-003.
WHEN OTHERS. "- für normale/vorerfaßte Belege
bhdgd-line1 = sy-title.
ENDCASE.
bhdgd-line2 = par_line.
bhdgd-inifl = 0.
NEW-PAGE.
ENDFORM. "NEW_PAGE
2. FORM SUMME_MERKEN *
Merken der Summeninformation *
FORM summe_merken.
CLEAR tbukrs.
tbukrs-bstat = bkpf-bstat.
tbukrs-bukrs = bkpf-bukrs.
tbukrs-bktxt = bkpf-bktxt.
tbukrs-gjahr = bkpf-gjahr.
tbukrs-monat = bkpf-monat.
tbukrs-dmsol = bsega-dmsol.
tbukrs-dmhab = bsega-dmhab.
IF 'DK' CA bseg-koart.
MOVE-CORRESPONDING tbukrs TO tbukrs_u.
tbukrs_u-koart = bseg-koart.
tbukrs_u-umskz = bseg-umskz.
tbukrs_u-dmsol = bsega-dmsol.
tbukrs_u-dmhab = bsega-dmhab.
COLLECT tbukrs_u.
tbukrs_u-monat = 0. "Summe für das Geschäftsjahr
COLLECT tbukrs_u.
ENDIF.
COLLECT tbukrs.
ENDFORM. "SUMME_MERKEN
3. FORM VORERFASSTE_STEUER_MERKEN *
Nachlesen der Steuerzeilen vorerfaßter Belege *
Gefüllt wird TBUKRS und der Extrakt *
FORM vorerfasste_steuer_merken.
CHECK hlp_bstat EQ 'V'.
SELECT * FROM vbset
WHERE ausbk EQ bkpf-bukrs
AND belnr EQ bkpf-belnr
AND gjahr EQ bkpf-gjahr.
CHECK vbset-hwste NE 0.
CLEAR: bseg, bsega.
bseg-koart = 'S'.
bseg-mwart = 'V'. "oder 'A', nur zum Füllen von T2
bseg-mwskz = vbset-mwskz.
IF vbset-shkzg EQ 'S'.
bsega-dmsol = vbset-hwste.
bsega-dmshb = vbset-hwste.
ELSE.
bsega-dmhab = vbset-hwste.
bsega-dmshb = - vbset-hwste.
ENDIF.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDSELECT.
ENDFORM. "VORERFASSTE_STEUER_MERKEN
4. FORM BELEGKOPF_MERKEN *
Je Beleg werden gefüllt: *
T0 - Informationsflag *
FORM belegkopf_merken.
t0-info = 0. "Belegkopf
APPEND t0.
CASE hlp_bstat.
WHEN 'A'.
t0-info = 6. "Ausgleichsbeleg
APPEND t0.
WHEN 'B'.
t0-info = 7. "zurückgen. Ausgleichsbeleg
APPEND t0.
WHEN 'V'.
t0-info = 1. "vorerfaßter Beleg
APPEND t0.
WHEN 'W'.
t0-info = 5. "ersetzter vorerfaßter Beleg
APPEND t0.
WHEN 'Z'.
t0-info = 4. "gelöschter vorerfaßter Beleg
APPEND t0.
ENDCASE.
IF bkpf-xblnr NE space AND hlp_bstat NA 'BWZ'.
t0-info = 2. "Referenz
APPEND t0.
ENDIF.
IF bkpf-stblg NE space.
t0-info = 3. "Storno
APPEND t0.
ENDIF.
SORT t0.
ENDFORM. "BELEGKOPF_MERKEN
5. FORM BELEGZEILE_MERKEN *
Je Beleg werden gefüllt: *
T1 - Personenkonteninformation *
T2 - Steuerinformation (nicht bei vorerfaßten Belegen) *
T3 - Sachkonteninformation *
FORM belegzeile_merken.
Vendors/ Customers
IF bseg-koart CA 'DK'.
t1-koart = bseg-koart.
IF par_hkto EQ 'X'.
t1-ktonr = bseg-hkont.
ELSEIF bseg-koart EQ 'K'.
t1-ktonr = bseg-lifnr.
ELSE.
t1-ktonr = bseg-kunnr.
ENDIF.
t1-bschl = bseg-bschl.
t1-umskz = bseg-umskz.
t1-xnegp = bseg-xnegp.
t1-zlspr = bseg-zlspr. "CR 21709
t1-dmshb = bsega-dmshb.
t1-wrshb = bsega-wrshb.
t1-xfwae = space.
APPEND t1.
Read the vendor description.
IF bseg-koart = con_vendor.
flg_vendr2 = con_true.
flg_vendr3 = con_true.
CLEAR lfa1-name1.
SELECT SINGLE name1
INTO lfa1-name1
FROM lfa1
WHERE lifnr = bseg-lifnr.
ELSEIF bseg-koart = con_cust.
CLEAR kna1-name1.
SELECT SINGLE name1
INTO kna1-name1
FROM kna1
WHERE kunnr = bseg-kunnr.
ENDIF.
IF bkpf-waers EQ t001-waers.
CLEAR t1.
ENDIF.
t1-xfwae = 'X'.
t1-name1 = lfa1-name1.
IF t1-name1 IS INITIAL.
t1-name1 = kna1-name1.
ENDIF.
APPEND t1.
CLEAR:
kna1-name1,
lfa1-name1.
CLEAR t1.
Save the hash total amounts
CLEAR tcurx-currdec.
SELECT SINGLE currdec
INTO tcurx-currdec
FROM tcurx
WHERE currkey = bkpf-waers.
IF tcurx-currdec = 1.
factor = 10.
ELSE.
factor = 100.
ENDIF.
CLEAR hash_totals.
hash_totals-bukrs = bkpf-bukrs.
CONCATENATE bkpf-monat '/' bkpf-gjahr INTO hash_totals-poper.
IF bsega-wrshb < 0.
hash_totals-cramt = bsega-wrshb * factor.
ELSE.
hash_totals-dramt = bsega-wrshb * factor.
ENDIF.
COLLECT hash_totals.
Tax accounts
ELSEIF bseg-mwart CA 'AV'.
t2-mwskz = bseg-mwskz.
t2-dmshb = bsega-dmshb.
APPEND t2.
IF flg_vendr2 = con_true.
flg_vendr2 = con_false.
CLEAR t2.
APPEND t2.
ENDIF.
GL Accounts
ELSEIF hlp_bstat NA 'ABWZ'.
t3-mwskz = bseg-mwskz.
t3-bschl = bseg-bschl.
t3-xnegp = bseg-xnegp.
t3-koart = bseg-koart.
t3-hkont = bseg-hkont.
t3-dmshb = bsega-dmshb.
APPEND t3.
IF flg_vendr3 = con_true
OR NOT bseg-kostl IS INITIAL
OR NOT bseg-prctr IS INITIAL.
flg_vendr3 = con_false.
CLEAR t3.
t3-kostl = bseg-kostl.
t3-prctr = bseg-prctr.
APPEND t3.
CLEAR t3.
ENDIF.
ENDIF.
ENDFORM. "BELEGZEILE_MERKEN
6. FORM BELEG_SCHREIBEN *
Ausgabe der Belginformationen *
FORM beleg_schreiben.
DATA:
len TYPE i.
Berechnung der benötigten Zeilen pro Beleg
DESCRIBE TABLE:
t0 LINES cnt_t0,
t1 LINES cnt_t1,
t2 LINES cnt_t2,
t3 LINES cnt_t3.
cnt_max = cnt_t0.
IF cnt_max LT cnt_t1.
cnt_max = cnt_t1.
ENDIF.
IF cnt_max LT cnt_t2.
cnt_max = cnt_t2.
ENDIF.
IF cnt_max LT cnt_t3.
cnt_max = cnt_t3.
ENDIF.
ADD 1 TO cnt_max.
IF cnt_max LE 10.
RESERVE cnt_max LINES.
ELSE.
RESERVE 5 LINES.
ENDIF.
SUBTRACT 1 FROM cnt_max.
Farbe setzen
IF flg_color EQ 0.
FORMAT COLOR 2 INTENSIFIED OFF.
flg_color = 1.
ELSE.
FORMAT COLOR 2 INTENSIFIED.
flg_color = 0.
ENDIF.
Index fuer optische Archivierung
PERFORM new-group(rsbtchh0).
DO cnt_max TIMES.
Belegkopfinformationen
WRITE /1 sy-vline NO-GAP.
IF sy-index LE cnt_t0.
READ TABLE t0 INDEX sy-index.
CASE t0-info.
WHEN 0. "Belegkopf
hlp_belnr = bkpf-belnr. "Belegnr. mit führenden Nullen
Referenz auf Originalbeleg
PERFORM start_doc_reference(rsbtchh0)
USING bkpf-bukrs bkpf-belnr bkpf-gjahr bkpf-bktxt. " change*
WRITE:
bkpf-bukrs,
hlp_belnr,
bkpf-blart,
bkpf-budat DD/MM/YYYY.
Ende der Referenz auf Originalbeleg
PERFORM end_doc_reference(rsbtchh0).
WHEN 1. "Vorerfaßter Beleg
WRITE:
(29) text-507.
WHEN 2. "Referenz
WRITE:
(12) text-503,
bkpf-xblnr.
WHEN 3. "Storno
WRITE:
(12) text-504,
bkpf-stblg.
WHEN 4. "Gelöschter vorerfaßter Beleg
WRITE:
(29) text-507,
(40) text-508.
WHEN 5. "Ersetzter vorerfaßter Beleg
txt_line = text-509.
REPLACE:
'&BLN' WITH bkpf-xblnr(10) INTO txt_line,
'&GJR' WITH bkpf-xblnr+10 INTO txt_line.
WRITE:
(29) text-507,
(40) txt_line.
WHEN 6. "Ausgleichsbeleg
WRITE: "
(29) text-510. "
WHEN 7. "zurückgen. Ausgleichsbeleg
WRITE: "
(29) text-511. "
ENDCASE.
ENDIF.
Personenkonteninformationen
Subledger Account Information
WRITE 31(1) sy-vline NO-GAP.
Internal tables T0 - T5 hold data for each section.
IF sy-index LE cnt_t1.
READ TABLE t1 INDEX sy-index.
IF par_hkto EQ 'X'.
PERFORM kontonummer USING t1-ktonr hlp_sakan.
ELSE.
hlp_sakan = t1-ktonr.
ENDIF.
IF t1-xfwae EQ space.
IF t1-xnegp = 'X'.
t1-xnegp = '-'.
ENDIF.
Write the vendor number.
WRITE: t1-koart,
hlp_sakan,
t1-bschl NO-GAP.
IF t1-umskz IS INITIAL.
WRITE: t1-xnegp NO-GAP,
t1-umskz.
ELSE.
WRITE: t1-umskz NO-GAP,
t1-xnegp.
ENDIF.
WRITE: t1-zlspr. "CR 21709 / 23588
WRITE: (22) t1-dmshb CURRENCY t001-waers.
ELSE.
Write the document currency, amount and the
vendor/ customerHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
Add new field in dynamic selections for transaction FAGLL03
Hello experts,
I'm trying to add field CPUDT (Entry Date) from table BKPF in the dynamic selections of logical database SDF.
In fact, and referring to some hints posted in the forum, I copied the standard selection view 'SAP' to 'CUS' and then added a new functional group and then assign the field CPUDT (table BKPF) to this functional group.
Even after saving, I couldn't see the new group I created neither the field CPUDT.
Could you please advice?
Thanks in advance.Hello
I think you can do it by adding the field into the view (SM30): V_T021S and transport the request.
Best regards,
Philippe -
Dynamic Selection for FBL1N and FBL5N reports
Dear all,
is it possible to show more fields in Dynamic Selection for FBL1N and FBL5N reports?
Thanks in advance
AlbertoDear Alberto,
Please refer to the SAP note 310886. In the note you should be able
to see how to add fields in to the dynamic selection , and the fields,
which are available for this.
I hope this can help You.
Mauri -
How to add into dynamic selection criteria (FBL1N) - custom field from LFB1
Hello all,
i have following problem. I added new customer field into table LFB1 (Z* field). And now i need to use this field as dynamic selection criteria in transaction FBL1N. I enhanced selection view for logical database KDF - i have created new customer view and I added my new field from LFB1. It is OK, i see this field in dynamic selection criteria in FBL1N but if i try to select according that Z* field, short dump occured.
open cursor with hold LC_KRED for select (VF_KRED_FIELDS)
from <b>VF_KRED</b>
where LIFNR in KD_LIFNR
and BUKRS in KD_BUKRS
and LAND1 in KD_LAND1
and KONZS in KD_KONZS
and VBUND in KD_VBUND
and AKONT in KD_AKONT
and BUSAB in KD_BUSAB
and (VF_KRED_WHERE)
Problem is in VF_KRED - this is database view (LFA1 joins LFB1). This view has no Z* fields and therefore it cannot be use in statement above -> dump.
Is needed repature of standard - enhancement of view VF_KRED?
Thank you very much.Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards -
Addition of field for Dynamic Selection in TCode FBL1N
Hi,
We have a requirement to add the field Partner Bank Type in TCode FBL1N on clicking dynamic selection button (under vendor master) in TCode FBL1N. To achieve this we went to TCode SE36 (Logical database) and selected logical databse KDF and then seleted selection views from the extras menu. There we have selected the table LFBK and then entered 01 (function group for Vendor Master) in the box next to the field BVTYP and selected the checbox on the right of BVTYP to enable Preselection. Saved the changes.
However the field Partner Bank Type does not show in the dynamic selection in TCode FBL1N under Vendor Master. Please help.
Thanks in advance.
MickThanks Miguel.
I found this on the web:
http://joyjitghosh.blogspot.com/2009/05/how-to-add-new-fields-in-dynamic.html
I have done exactly as per the instructions given in the above link, but still I am unable to see the field in the dynamic selections of TCode FBL1N. Any reason why and how can we add the field in the dynamic selections?
Mick -
Dynamic selections with FBL1N transaction
Hello,
I want to add new fields to do dynamic selections using FBL1N transaction.
I have "House bank" field in the company code fields, but I want this field in the document fields.
How could I do it?
Thank you very muchDear Beatriz
Yes this is possible. You need to extend the selection view for the logical database KDF using transaction SE36, to have more selection fields available in the dynamic selections of the line item display.
Call up Transaction SE36 and enter the logical database KDF.
Choose "Extras --> Selection views".
Select the origin of view.
Choose "Display" or "Change".
Vendors: logical database: KDF
Permitted tables:
LFA1, LFB1: All fields are permitted that are contained in the VF_KRED
view. If necessary, you have to include additional fields in
the view fields category using Transaction SE11.
BSIK: all fields
Change the source code in program SAPDBKDF, Form INIT as explained in the SAP note 310886.
If this helps please reward with points.
Best Regards
Kesav -
Adding of new field in dynamic selection for financial statements
Hi ALL,
I want to add Trading partner in dynamic selection fields of financial statement report at document level not yet GL master level: S_ALR_87012284 - Balance Sheet / Profit and Loss Statement .
Can any one tell how to proceed?
I have referred notes: Note 188663 - Enhancing selection views and dynamic selection.
But exactly I am unable to find which logical database has to be given?
regs,
ramesh bHi,
If you want to add extra field in your report you can do the setting in Layout selection. If it is not available kinldy check any SAP notes available or not. Otherwise do Zreport with your ABAPer.
Regards,
Mohan. -
Adding material field in dynamic selection of FBL3N
Hi,
We need to add material field in the dynamic selection of FBL3N report.
I have gone through SCN forums but not found any related info and searched in service marketplace for related SAP notes and found 310886 as per this note.
G/L accounts: logical database: SDF
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
But material field is not available in BSIS table, is there any way to add material in the dynamic selection of FBL3N report.
Regards,
RK.Hi bhi,
Please check BTE 1650. You need to enhance the table. Please give the functional module to your ABAPer. He will do the rest.
Regards,
Kishore -
Hi.
Is it possible certain selection fields from dynamic selections (such as clearing document)
in report FBL1N to be always available in the dialog appeared in the right hand instead of choosing them every time of the dialog in the left hand?
Thanks in advancefurther to the comments below, you can create a variant and in the variant you can define the layout, so you can move fields to the left, right or center.
You can make the variant a global variant so all users will use it, or you can make it a user variant so only you can use it.
Finally and something to consider you can define user specific layouts in t code FB00.
This is best practise as creating a global variant will cause problems.
Hope this helps award points if useful. -
'Plant Location' field in dynamic selection of report
Hi Experts,
I have entered some value in plant location in WBS org. data tab and want to filter the report by giving this field in dynamic selection of reports. But this field is not availble in dynamic selection. how we can add the same, even this is standard field in PRPS table (PRPS-STORT). Pls help.
Regards
Dinesh ChauhanIn standard SAP this field is not set for dynamic selection
you can create your customer view with STORT activated or you can change the STD view
SE36
enter PSJ as logical database
go to menu path (in that same screen)
Extras -> selection views
this will default to CUS (short for CUS view)
change this to SAP and change button
In the table node section scroll down till you come to table PRPS_R then double click on that
in the table field section below enter B2 next to the stort field (you may to scroll) - this means that this will now be visible in the org unit section for WBS in dyn selection
save etc and then re try -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,
Maybe you are looking for
-
i have just plugged my i phone 4s into my computer and it automatically synced with i tunes, i tunes for some reason removed all the apps and backed up my phone automatically. ive gone to put my apps back on and its showing me an automatic flash up m
-
I recently upgraded to Windows 7 and had not problems with Photoshop after doing so. Last week I installed a new monitor and discovered the tools were so small I had a hard time seeing them. I also noticed the cursor had 3 little things on it. I d
-
How to get the size of uploaded file in sap ABAP MODULE POOL PROGRAMMING
Hello, I am using a fucntion module GUI UPLOAD to upload a file from pc to SAP . I want to upload the details of the file. i.e TYPE NAME AND SIZE of the file. I am unable to do so. Help me. Gaur Mayank
-
Remove child on the root timeline from within a movieclip
Hi How do I remove a child from the root timeline from within a separate movieclip? I've tried MovieClip(parent).removeChild(mc1); But I get this error 1120: Access of undefined property mc1. I could write a function in the root timeline that just re
-
(SOLVED) Display brightness disappeared from Power Options in Vista, Lenovo G530
Hello board, My system Lenovo G530 product ID 444638U I used to be able to adjust display brightness in Vista from Control Panel > Power Options. I could set how bright when on battery and how bright when on AC. Also, it used to be that when I unplug