Added airport express to extreme to extend wifi

but not getting added range. I have the airport extreme as the base with the box checked to allow extended network.

Hi, not quite sure since I don't have that setup, but it sounds like you may still be trying to join/connect to the original one.
Instead of joining it from the list, click the WiFi icon at the top, and click join other network, see if there's a new one to join. Fill in everything as needed.

Similar Messages

Added AirPort express to extreme but my iPad does not see the express

I wanted to extend my network due to "dead spots" in the house and patio but no change after adding the AirPort express to my extreme. It set up fine and both with a green light but the bars on the iPad have not changed. It still has a slow connection despite being in the same room as the express. I set it up as a N-device (the express) per the instructions to extend a network. Our home phone is 5.8GHz & should not interfere. Apple Tv & iPhone 4 work but did before. What have I missed??

It sounds like the Express is not "extending" Quick check points:
On the AirPort Extreme
Open AirPort Utility - click Manual Setup
Click the Wireless tab below the icons
Make sure that there is a check mark next to "Allow this network to be extended"
Update to save any changes
On the AirPort Express
Open AirPort Utility - click Manual Setup
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Extreme network
Make sure there is a check next to "Allow wireless clients"
Security = Same setting as Extreme
Password = Same as Extreme
Update to save any changes
If you have a laptop handy, turn off the wireless on the laptop and temporarily connect it to the ethernet port on the Express with an ethernet cable. Open your browser. If your Express is "extending", you will have internet access.

I have an old Airport Express I want to use to extend WiFI (which is best Airport Express or Extreme) and to have a HD for storing Itunes connected to the old Airport as well. I would also like to have the new Airport hardwired to my Mac (desktop)

I am willing to buy a new Airport Express or Extreme so I can get at least one LAN port - but only if I can use that LAN port to connect to my MAC (desktop) so it doenst have to get internet via the WiFi- AND so I can set it up as its own hot spot. I think I saw that was possible?? That way my guest network would be separate from my home Network. Just trying to get the best layout. I have cable modem to old Airport now and USB from it to printer.
Maybe a new Airport - again USB to printer and LAN to MAC(?) then old Airport elsewhere in the house to extend the signal and use USB off it to hard drive to store Itunes? Would LOVE to have it there to use for Airplay etc- Is that possible- I have read many comments and still not sure if it is possible or not.
Baxically I need a simple solution to storing all my photos- music and movies (MAC only has 500GB) AND have a great back up; Currently have a 1TB drive as Time Machine - so could use that for back up- but running out of space on MAC for all the media I am saving. THANKS!!

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

Theoretically yes. It will really depend on your situation. Please review the following Apple Support article to understand what is possible with the AirPort base stations and post back with any questions or help in setting up your extended network.

Can my Airport Express be used to extend the signal for an iPad2

I am using a Linksys wired router as the beginning of my home network. There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network. I have an iBook on the other side of the wall and about 10 feet and an iMac about 20 feet with one wall in between. These two have some fluctuation in their signal but only between 4 bars and 3. I just got an iPad 2 and it is causing me grief because it struggles to maintain a connection just another 10 feet from the iBook. If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router. That kind of defeats the purpose of buying an iPad. So, my question is how to rearrange the network so the iPad is happy in the living room where I mostly use it. I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room. Right now the Airport is wired to the router. Is this necessary for it to be a part of the network? I know I can use it to get music from iTunes to speakers but would that placement also work as a wireless extender? Would just buying another router for the Xbox location and putting the Airport there also be a better solution?

ladybastet, let's clean up some terminology. You should designate only one router for your network. At present that is the Linksys. Your wireless access point is the Express, and it gets its network connection from the Linksys. Is that correct?
If I put it next to the iMac when it has full 4 bars the iPad gets maybe 2. The iPad has full bars if next to the router.
Now that you know your Linksys is the router, is the above correct? Unless the Linksys is also a wireless access point, the iPad's proximity to it will not matter. Only its proximity to the device creating the wireless network is a factor. In your case, I believe that is the Express.
There is an ethernet cable running from it through a wall to the Xbox 360 and an Airport Express serving as the base for the wireless network.
I'm not sure I understand. Is one Ethernet cable going to two places? What is it connected to, precisely?
Right now the Airport is wired to the router. Is this necessary for it to be a part of the network?
In the case of a wired router, yes.
I'm wondering if you have things configured properly, particularly if you have configured the iMac to share its network connection over AirPort. I'm even wondering if your iPad has unintentionally joined a neighbor's wireless network.
I had considered moving the iMac and using it as a base station to free the Airport Express for other duty but where I want to move it is further away from the living room.
Using the iMac to share a wired Ethernet connection to create its own wireless network is certainly possible, but it is less than ideal. For one, the iMac would have to be powered on all the time.
You do not need or want another router.
It is impossible for me to be certain of your network environment (meaning, the size and configuration of your home, the proximity of competing wireless networks, the number of network devices, and the potential for interference) but you might be better off replacing the wired Linksys router with an AirPort Extreme. That would give you the ability to create a "roaming network" or to use your Express to extend the Extreme's wireless network. I think this would be the easiest solution, but given the uncertainly of your description this expense may not be necessary.
Much of my confusion stems from your original question: "Can my Airport Express be used to extend the signal for an iPad2" - the quick answer is yes, but a prerequisite question is, "what signal?" The only "signal" I can determine that may be relevant is the one created by the Express. Once we have the terminology fixed, perhaps we can fix what's wrong with your network.

Airport Express and Netgear powerline extender

I use my Airport Express for airtunes only on my wireless router. (It's a Netgear Rangemax WPN824). The station is in range of my wireless router and has worked fine to date.
I recently bought a powerline extender for my network (a Netgear WGX102). I put the extender in the area of my apartment that was out of range of my router. It is, however, in the same room as the Airport Express. In other words, the Airport Express is in range of both my wireless rounter and the powerline extender.
What happens is that the airport express station drops off the network when I have the powerline extender working and/or the extender doesn't work when Airport Express is.
Ideally they would work together so that I could be online and stream music. I can't seem to make it happen.
I've tried excluding the Airport Express from accessing the extender by limiting access to just the PC's, but that didn't make a difference.
Clearly there is some conflict but I don't know how to resolve it.
Unfortunately my router does not seem to support WDS, which would mean I could use my Airport Express as a bridge. (Or at least Netgear says it isn't and I'm not technically savvy enough to hack it if in fact it is.)
Is there anything I can do?
Windows XP Pro

I would like to understand why you need to set up the AEX as "create a wireless network" instead of "extend a wireless network".
"Extend a wireless network" is used only if the AirPort Extreme and AirPort Express are communicating together using wireless only...not Ethernet.
"Create a wireless network" is used only if the AirPort device has an Ethernet connection....which it does in the type of setup that you have.
It just seems counter intuitive to me and I'm trying to get smarter about the whole networking thing.
All the info about all the different types of ways to provide additional wireless coverage is contained in this Apple document. It's on the main forum page, but users tend to either ignore it, or perhaps miss it.
http://support.apple.com/kb/HT4145

Can I link a chain of airport express devices to use as wifi extenders?

Hi all,
At work we have a large warehouse, office at one end, offices at the other end and warehousing in the middle (to keep things simple) . I would like one single wifi network for the whole building so I can link up Filemaker to iPads, iPhones, Macbooks etc. I have bought two Airport Express devices and put them at two ends of the building but they don't reach each other so I've temporarily set up two wifi networks. I will need a 3rd, maybe even 4th Airport Express.
My question is this:
Can I form a chain of airport express devices to use as wifi repeaters from the first? i.e. Can a repeated wifi signal be repeated again?
Or in other words... say I have 4 airport express devices (A, B, C, D) and only A is linked to the network with a cable...B repeats the signal from A. (A is out of reach of C and D). B repeats the wifi signal from A to C...C repeats the wifi signal to D...will this work/is it possible?
Thanks!
p.s. hopefully I haven't confused you too much

Hi - Tesserax is right - you can't do this wirelessly but I notice that you say that you have temporarily set up two wi-fi networks - does this mean that you have access to ethernet connections - if you do and the distances aren't too long, then you can do it by placing wired base stations where their wi-fi would overlap - you would then set up each to create a wireless network with the same name, password and security type - and as long as they are on the same subnet, you would have a roaming network so that clients can move from one "zone" to the next without having to re-connect - I have 2 parallel networks using 8 Extremes and 2 Expresses connecting 3 hangars and 3 offices and it works great.

Differences between AirPort Express and Extreme?

What are they differences between AirPort Express and Extreme?

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Any software differences between new airport express and extreme?

I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
The only difference I can see is using the USB for hard drive use.
Also, do you think the performance will be similar. I know the time capsule actually rated slower than the extreme even though they use similar hardware.

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

WHICH IS BETTER AS A BUSINESS TRAVELER-AIRPORT EXPRESS OR EXTREME

Can someone please advise me as a business traveler since this is my first Mac in many, many years whether the Airport Express or Extreme would be the "best fit" for me?
I'm assuming Express would be the idea situation....thanks!

Hmmm. To be honest, I don't see how this would help you at an airport. They are all using wireless for public use. You simply locate the wireless network with your computer and log on (and pay the fees via your credit card unless its a free service).
Power wise, you would need an AC outlet to plug the Express in. Those are sometimes difficult to find as well at the airport. But again, having an AirPort Express around when a wireless network is already available would not benefit you in any way.

Can an Airport Express be used to extend the range of my Comcast wireless gateway?

We recently moved to a big old brick and stone farmhouse. When Comcast came they installed their new wireless gateway. Unfortunately the construction of my house is pretty solid. It effectively blocks the signal at the far end on the second floor. I've been trying to use an Airport Express, newest model, to extend the range of my network. Using the Airport Utility, it seems like it connects but the signal is no better. Does the Airport Express only work as a range extender on Apple wireless devices, or am I missing something when I use the Airport Utility to set up the extended network?

The AirPort Express can extend the wireless signal from the Comcast gateway if it is permanently connected to the gateway using a wired Ethernet connection, and the Express is configured to create a wireless network using the same name and password as the Comcast wireless network.
The Express cannot wirelessly extend the signal from the Comcast gateway, since the wireless "extend" feature will only work with other Apple routers.
The Express can "join" the wireless network provided by the Comcast gateway for use with AirPlay or a remote printer at the USB port, but when the Express "joins" a network, it does not provide any additional wireless signal coverage in that setting.

Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

Welcome to Apple Support Communities
AirPort stations aren't modems, so they have to be connected to the modem you are already using. The AirPort Extreme and Express have a WAN port, where you have to plug an Ethernet cable that has to be connected to the modem.
After doing this, you can set up the AirPort station by using AirPort Utility. If you have Windows, download AirPort Utility from the Apple website > http://support.apple.com/kb/dl1547

How do I set up an Airport Express as a hard wired wifi accesspoint?

How do I set up an Airport Express as a hard wired wifi accesspoint?

Please check out the following Apple Support article for configuring your routers for a "Roaming" network. In this case the AirPort Express would be connected back to your other wireless router by Ethernet and configured as a bridge. This would effectively make the Express perform as a Wireless Access Point.

Added airport express to extreme to extend wifi

Similar Messages

Maybe you are looking for