Added an avr, need help with tv speakers

hello community,
i have a Toshiba Regza 46mv732 led tv and i recently added an Onkyo TX-NR525 avr. everything is hooked up correctly, and surround sound works perfectly EXCEPT i cannot get the tv speakers to turn off automatically when the avr is turned on. i have to manually turn the tv volume down. my neighbors tv, a Samsung, turns the speakers off automatically when his avr is turned on-can i do the same with my Toshiba? am i missing something in the tv settings? and yes, i have a high-speed hdmi cable hooked up to hdmi-1(ARC) on the tv to the avr.
any help will be surely welcomed.
thanks!!!!

That doesn't appear to be a model made by Toshiba USA, and this is the Toshiba USA forums. You may want to contact Toshiba in your region, because I don't have specific information on your model. I can say that it appears to depend on model. On my Toshiba TV, my speakers don't mute automatically. I use an optical cable to connect my sound system. When I set up my sound system, it had me press the volume buttons on my remote so it could detect what signal to use for volume up and volume down; I didn't press those buttons. I used rewind and fast-forward (because I don't use those buttons for their intended purpose). This allows me to control my TV's volume with the volume buttons and the sound system's volume with the rewind/fast-forward buttons.
- Peter

Similar Messages

Need help with adding emoji to my hubby's phone don't see it when I click on the keyboard tab

I need help with adding emoji to my hubby's iPhone when I go to settings then the keyboard tab it's not there

I did that bad it's not there and doesn't give me to option to click on it

Need Help With File Matching Records

I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
    try
      output1 = new Formatter("trans.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
    try
      output2 = new Formatter("oldmast.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
    // object to be written to file
    TransactionRecord record1 = new TransactionRecord();
    Scanner input1 = new Scanner(System.in);
    System.out.printf("%s\n%s\n%s\n%s\n\n",
      "To terminate input, type the end-of-file indicator",
      "when you are prompted to enter input.",
      "On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
      "On Windows type <ctrl> z then press Enter");
    System.out.printf("%s\n%s",
       "Enter account number (> 0) and amount.","? ");
    while (input1.hasNext()) // loop until end-of-file indicator
      try // output values to file
        // retrieve data to be output
        record1.setAccount(input1.nextInt());    // read account number
        record1.setAmount(input1.nextDouble()); // read amount
        if (record1.getAccount() > 0)
          // write new record
          output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
        } // end if
        else
          System.out.println("Account number must be greater than 0.");
        } // end else
      } // end try
      catch (FormatterClosedException formatterClosedException)
        System.err.println("Error writing to file.");
        return;
      } // end catch
      catch (NoSuchElementException elementException)
        System.err.println("Invalid input. Please try again.");
        input1.nextLine(); // discard input so user can try again
      } // end catch
      System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
        "and amount.","? ");
    } // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
    // object to be written to file
    AccountRecord record2 = new AccountRecord();
    Scanner input2 = new Scanner(System.in);
    System.out.printf("%s\n%s\n%s\n%s\n\n",
      "To terminate input, type the end-of-file indicator",
      "when you are prompted to enter input.",
      "On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
      "On Windows type <ctrl> z then press Enter");
    System.out.printf("%s\n%s",
       "Enter account number (> 0), first name, last name and balance.","? ");
    while (input2.hasNext()) // loop until end-of-file indicator
      try // output values to file
        // retrieve data to be output
        record2.setAccount(input2.nextInt());    // read account number
        record2.setFirstName(input2.next());      // read first name
        record2.setLastName(input2.next());       // read last name
        record2.setBalance(input2.nextDouble()); // read balance
        if (record2.getAccount() > 0)
          // write new record
          output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
            record2.getLastName(), record2.getBalance());
        } // end if
        else
          System.out.println("Account number must be greater than 0.");
        } // end else
      } // end try
      catch (FormatterClosedException formatterClosedException)
        System.err.println("Error writing to file.");
        return;
      } // end catch
      catch (NoSuchElementException elementException)
        System.err.println("Invalid input. Please try again.");
        input2.nextLine(); // discard input so user can try again
      } // end catch
      System.out.printf("%s %s\n%s", "Enter account number (> 0),",
        "first name, last name and balance.","? ");
    } // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
    if (output1 != null)
      output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
    if (output2 != null)
      output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
   // main method begins program execution
   public static void main( String args[] )
     CreateTextFile application = new CreateTextFile();
     application.openTransFile();
     application.addTransactionRecords();
     application.closeTransFile();
     application.openOldMastFile();
     application.addAccountRecords();
     application.closeOldMastFile();
   } // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
    this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
    setAccount(acct);
    setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
    account = acct;
} // end method setAccount
// get account number
public int getAccount()
    return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
    amount = amt;
} // end method setAmount
// get amount
public double getAmount()
    return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
    this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
    setAccount(acct);
    setFirstName(first);
    setLastName(last);
    setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
    account = acct;
} // end method setAccount
// get account number
public int getAccount()
    return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
    firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
    return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
    lastName = last;
} // end method setLastName
// get last name
public String getLastName()
    return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
    balance = bal;
} // end method setBalance
// get balance
public double getBalance()
    return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
    balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
    try
      inTransaction = new Scanner(new File("trans.txt"));
    } // end try
    catch (FileNotFoundException fileNotFoundException)
      System.err.println("Error opening file.");
      System.exit(1);
    } // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
    try
      inOldMaster = new Scanner(new File("oldmast.txt"));
    } // end try
    catch (FileNotFoundException fileNotFoundException)
      System.err.println("Error opening file.");
      System.exit(1);
    } // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
    try
      outNewMaster = new Formatter("newmast.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
    try
      theLog = new Formatter("log.txt");
    catch (SecurityException securityException)
      System.err.println("You do not have write access to this file.");
      System.exit(1);
    } // end catch
    catch (FileNotFoundException filesNotFoundException)
      System.err.println("Error creating file.");
      System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
    TransactionRecord transaction = new TransactionRecord();
    AccountRecord account = new AccountRecord();
    try // read records from file using Scanner object
      System.out.println("Start file matching.");
      while (inTransaction.hasNext() && inOldMaster.hasNext())
        transaction.setAccount(inTransaction.nextInt());     // read account number
        transaction.setAmount(inTransaction.nextDouble());   // read amount
        account.setAccount(inOldMaster.nextInt());     // read account number
        account.setFirstName(inOldMaster.next());      // read first name
        account.setLastName(inOldMaster.next());       // read last name
        account.setBalance(inOldMaster.nextDouble()); // read balance
        if (transaction.getAccount() == account.getAccount())
          while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
            account.combine(transaction);
            outNewMaster.format("%d %s %s %.2f\n",
            account.getAccount(), account.getFirstName(), account.getLastName(),
            account.getBalance());
            transaction.setAccount(inTransaction.nextInt());     // read account number
            transaction.setAmount(inTransaction.nextDouble());   // read amount
        else if (transaction.getAccount() != account.getAccount())
          outNewMaster.format("%d %s %s %.2f\n",
          account.getAccount(), account.getFirstName(), account.getLastName(),
          account.getBalance());
          theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
      } // end while
      System.out.println("Finish file matching.");
    } // end try
    catch (NoSuchElementException elementException)
      System.err.println("File improperly formed.");
      inTransaction.close();
      inOldMaster.close();
      System.exit(1);
    } // end catch
    catch (IllegalStateException stateException)
      System.err.println("Error reading from file.");
      System.exit(1);
    } // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
    if (inTransaction != null)
      inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
    if (inOldMaster != null)
      inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
    if (outNewMaster != null)
      outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
    if (theLog != null)
      theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
   // main method begins program execution
   public static void main( String args[] )
     FileMatch application = new FileMatch();
     application.openTransFile();
     application.openOldMastFile();
     application.openNewMastFile();
     application.openLogFile();
     application.updateRecords();
     application.closeLogFile();
     application.closeNewMastFile();
     application.closeOldMastFile();
     application.closeTransFile();
   } // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number            Name                     Balance
100                            Alan Jones                   348.17
300                            Mary Smith                    27.19
500                            Sam Sharp                   0.00
700                            Suzy Green                   -14.22Sample data for transaction file:
Transaction file                    Transaction
Account Number                  Amount
100                                         27.14
300                                         62.11
300                                         83.89
400                                         100.56
700                                         80.78
700                                         1.53
900                                         82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.

From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do.

I need Help with a website I've created

I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>The Lighthouse Church</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<style type="text/css">
#apDiv12 {
    position:absolute;
    width:295px;
    height:23px;
    z-index:4;
    left: 198px;
    top: 1px;
#apDiv13 {
    position:absolute;
    width:135px;
    height:22px;
    z-index:5;
    left: 1001px;
    top: 3px;
#apDiv14 {
    position:absolute;
    width:309px;
    height:992px;
    z-index:1;
    left: 33px;
    top: 479px;
#apDiv15 {
    position:absolute;
    width:327px;
    height:999px;
    z-index:1;
    left: 324px;
#apDiv16 {
    position:absolute;
    width:262px;
    height:1000px;
    z-index:2;
    left: 674px;
    top: 477px;
#apDiv17 {
    position:absolute;
    width:85px;
    height:34px;
    z-index:1;
    left: -379px;
    top: 1001px;
#apDiv18 {
    position:absolute;
    width:200px;
    height:115px;
    z-index:6;
#apDiv19 {
    position:absolute;
    width:168px;
    height:31px;
    z-index:3;
    left: 448px;
    top: 1451px;
#apDiv20 {
    position:absolute;
    width:94px;
    height:33px;
    z-index:3;
    left: 384px;
    top: 1477px;
body {
    background-color: #000;
    margin-left: 0px;
    margin-right: 0px;
#apDiv21 {
    position:absolute;
    width:920px;
    height:200px;
    z-index:4;
    left: 19px;
    top: 233px;
</style>
</head>
<body>
<div class="container">
<div class="content">
    <div id="apDiv5">
      <div id="apDiv16">
        <div id="apDiv17">
          <map name="Map2" id="Map2">
            <area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
          </map>
          <img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
          <map name="Map" id="Map">
            <area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
          </map>
        </div>
      </div>
      <div id="apDiv21">
        <blockquote>
          <blockquote>
            <blockquote>
              <blockquote>
                <blockquote>
                  <blockquote>
                    <p><img src="faithexplosion.png" width="314" height="225" /></p>
                  </blockquote>
                </blockquote>
              </blockquote>
            </blockquote>
          </blockquote>
        </blockquote>
      </div>
      <div id="apDiv14">
        <div id="apDiv15">
          <div>
            <div>
              <p> Special Message from Perry Stone </p>
              <h2> Was Jesus Born on December 25?</h2>
              <p> 12/20/2010 </p>
              <p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
              <p>Last   year, in response to the growing number of Christians who celebrate   Hanukkah but hate Christmas, I wrote an article for this website titled   “Hanukkah or Christmas?” I explained why I think Jesus was either   conceived or birthed on December 25.</p>
            </div>
          </div>
          <div>
            <div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
              <p> Prophecy Update </p>
              <h2> What Happened to Global Warming?</h2>
              <p> 12/17/2010 </p>
              <p> </p>
            </div>
          </div>
          <div>
            <div></div>
          </div>
          <div>
            <div></div>
          </div>
        </div>
        <div>
          <p><font size="2">Special Word</font></p>
          <p><font size="2">January 7th, 2011</font></p>
          <p> <font size="2">Dear Viewers:</font></p>
          <p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious            times in church history. Many things are coming upon the world and also upon the church and we (the church) must be totally            prepared to take up our cross daily and venture out into the lost and</font></p>
          <p> <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
        </div>
        <p> </p>
        <div></div>
        <div>
        </div>
        <div></div>
        <p> </p>
      </div>
      <img src="lighthousegraphic2.jpg" width="960" height="1509" />
      <div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
        <map name="Map3" id="Map3">
        <area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
      </map>
</div>
    </div>
<p> </p>
</div>
</div>
<div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
<div id="apDiv11">
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="#">Home</a>    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
      <ul>
        <li><a href="#">Fresh Word</a></li>
        <li><a href="#">Itinerary</a></li>
        <li><a href="#">Prophetic Word</a></li>
        <li><a href="#">Sermons</a></li>
        <li><a href="#">Special Words</a></li>
        <li><a href="#">Word of Month</a></li>
      </ul>
    </li>
    <li><a href="#">Men Ministry</a></li>
    <li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
      <ul>
        <li><a href="#">Chris Gore</a></li>
</ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
      <ul>
        <li><a href="#">Contact Us</a></li>
        <li><a href="#">Donate</a></li>
        <li><a href="#">Events</a></li>
        <li><a href="#">Our Store</a></li>
        <li><a href="#">Prayer Request</a></li>
        <li><a href="#">Salvation</a></li>
        <li><a href="#">Subscribe</a></li>
        <li><a href="#">Vision</a></li>
        <li><a href="#">We Believe</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Resources</a>
      <ul>
        <li><a href="#">Prepare for Disaster</a></li>
        <li><a href="#">How to Fast</a></li>
        <li><a href="#">Heaven & Hell</a></li>
        <li><a href="#">Warfare Prayers</a></li>
        <li><a href="#">Wisdom Words</a></li>
      </ul>
    </li>
    <li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
      <ul>
        <li><a href="#">Article Archive</a></li>
        <li><a href="#">Audio Prophecies</a></li>
        <li><a href="#">Color for Year</a></li>
        <li><a href="#">Major Articles</a></li>
        <li><a href="#">Prophecy Archive</a></li>
        <li><a href="#">Prophetic Articles</a></li>
        <li><a href="#">Word for Year</a></li>
      </ul>
    </li>
</ul>
</div>
<div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
<div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Look at all the apdiv's you have. Those are absolutely positioned layers. I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS. I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there.
http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

I need help with illustrator 10

I need help with illustrator 10, I have artwork I need to finish in it and it keep kicking me off.
I have added transparency, using SVG effects, a lot more detail and that is when it started kicking me off. I just added 2 gb of ram thinking it was ram I needed but it keeps kicking me off.
I think there is something I need to change in how I save it???
I have a mini mac, 10.5.8
The screen also turns white while I am working and when it does kick me off it says there is an error.I know I am behind the times but I am just trying to get this deadline done and be able to update my computer and such in a few months. Help!

I have very simple artwork and when I add any textures or transparency or
any type of detail from SVG effects it will not let me copy it and paste or
when I do try to move it everything turns white or it just kicks me off.
Then I cannot get back onto illustrator. It takes a very long time to save
it or move things. This has not happened before. I have been designing
for 25 years and am self taught. I can get on my simple designs. I am
saving my artwork as AI document. I just have to finish the designs and
put them into dropbox. I do not need to print. I did add 2 GB of ram
thinking the extra memory would help. I think I need to turn something off
and turn something on. There is an error window that comes up the says the
application illustrator has quit unexpectedly. I am at a dead end on what
to do!

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

Need Help with a Flash Web Project

Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!

The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

Need help with SQL Query with Inline View + Group by

Hello Gurus,
I would really appreciate your time and effort regarding this query. I have the following data set.
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*20.00*-------------19
1234567----------11223--------------7/5/2008-----------Adjustment for bad quality---------44345563------------------A-----------------10.00------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765--------------------I---------------------30.00-------------19
Please Ignore '----', added it for clarity
I am trying to write a query to aggregate paid_amount based on Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number and display description with Invoice_type 'I' when there are multiple records with the same Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number. When there are no multiple records I want to display the respective Description.
The query should return the following data set
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*10.00*------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765-------------------I---------------------30.00--------------19
The following is my query. I am kind of lost.
select B.Description, A.sequence_id,A.check_date, A.check_number, A.invoice_number, A.amount, A.vendor_number
from (
select sequence_id,check_date, check_number, invoice_number, sum(paid_amount) amount, vendor_number
from INVOICE
group by sequence_id,check_date, check_number, invoice_number, vendor_number
) A, INVOICE B
where A.sequence_id = B.sequence_id
Thanks,
Nick

It looks like it is a duplicate thread - correct me if i'm wrong in this case ->
Need help with SQL Query with Inline View + Group by
Regards.
Satyaki De.

Need help with saving data and keeping table history for one BP

Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
Bongani

Hi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks

Need help with .cr2 RAW-files

Hi,
I've installed Aperture 2.1.2, and the newest RAW compability update (2.5).
However, when I try to work with RAW files from my Canon EOS 1000D camera (nothing big, I know), all I see is "Unsupported image format".
I really need help with this quick. The RAW files are in .cr2 format.

as a last resort ...
this is the update that added support for 1000d ... however the 3 releases post this should have it too ...
http://www.apple.com/downloads/macosx/apple/application_updates/digitalcameraraw compatibilityupdate22.html
but you can roll back your raw compatibility and see if that works ... then progressively go forward to current and see if/where the problem lies ...
you could try a re-install of 2.5 ...
http://support.apple.com/downloads/DigitalCamera_RAW_Compatibility_Update_25
info on rolling back the update is in this thread:
http://discussions.apple.com/thread.jspa?messageID=9097867

Hi i need help with my mp3 flash player

Hi i need help with my mp3 player, i wan't to add pause button..can you help me?
i created button i added btn_pause and it won't work.
function soundStatus(){
          var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded() / _root.sound_mc.sound_obj.getBytesTotal();
          _root.loader.loadBar._width = amountLoaded * 260;
          duration = _root.sound_mc.sound_obj.duration;
          position = _root.sound_mc.sound_obj.position;
          _root.playHead._x = position / duration * 272 + 5;
btn_play.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          this._parent.sound_mc.songStarter(songfile[song_nr]);
btn_pause.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          this._parent.sound_mc.sound_obj.pause();
btn_stop.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          this._parent.sound_mc.sound_obj.stop();
btn_fw.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          (song_nr == songfile.length-1) ? _global.song_nr=0 : _global.song_nr++;
          _root.sound_mc.songStarter(songfile[song_nr]);
btn_rev.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          (song_nr == 0) ? _global.song_nr=songfile.length-1 : _global.song_nr--;
          _root.sound_mc.songStarter(songfile[song_nr]);
<moved by mod from as3 - kglad>

:
function soundStatus(){
          var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded() / _root.sound_mc.sound_obj.getBytesTotal();
          _root.loader.loadBar._width = amountLoaded * 260;
          duration = _root.sound_mc.sound_obj.duration;
          position = _root.sound_mc.sound_obj.position;
          _root.playHead._x = position / duration * 272 + 5;
btn_play.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          this._parent.sound_mc.songStarter(songfile[song_nr]);
btn_pause.onRelease = function() {
          clearInterval(timeInterval); // you should re-set this interval when the unpause button is clicked
         // _root.timeDisplay_txt.text = "00:00/00:00";
          this._parent.sound_mc.sound_obj.stop()
btn_unpause.onRelease=function(){
this._parent.sound_mc.sound_obj.start(position/1000);
btn_stop.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          this._parent.sound_mc.sound_obj.stop();
btn_fw.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          (song_nr == songfile.length-1) ? _global.song_nr=0 : _global.song_nr++;
          _root.sound_mc.songStarter(songfile[song_nr]);
btn_rev.onRelease = function() {
          clearInterval(timeInterval);
          _root.timeDisplay_txt.text = "00:00/00:00";
          (song_nr == 0) ? _global.song_nr=songfile.length-1 : _global.song_nr--;
          _root.sound_mc.songStarter(songfile[song_nr]);

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

HT4528 Hi I need help with the volume on my phone even on speaker i can barely hear who I am speaking with

Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.

[SOLVED] Need help with setting up X

Hello guys am new to the forum and this is my first post here. I am in need of a little help.
Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
Section "Device"
Identifire "r"
Driver "radeon"
EndSection
After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
Please see the errors here Paste #399362 | LodgeIt!
Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
So please help me getting X up and running.
Regards
Last edited by Shashwat (2011-06-04 09:47:47)

Ok I sorted out the misprints in the file and installed xinit but still can't get it to work.
1. There are few errors in xorg.conf that I cannot make it out.
2. The X output says no screen found. ?
http://paste.pocoo.org/show/399383/
Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
Kind of bugging
Please do help.

Added an avr, need help with tv speakers

Similar Messages

Maybe you are looking for