Added as host but no host options without another host present.
I was added as a host to a meeting and can start the meeting just fine but when I enter the room Connect only gives me the presenter areas and have no access to the host options (such as Share My Screen or the side bars). Oddly, those options appear to me as soon as another host joins the meeting. I'm using a Mac laptop with Windows running as a virtual PC. I've tried accessing the room from both my Mac and my virtual PC but they both have the same results. What am I missing?!?
You must be in the Meeting Host group to start a room and access the Host features. The reason you see those features become available when another Host joins the room is because they are a member of the Meeting Host group.
Similar Messages
-
Re-Adding Removed host gives Duplicate SMSBIOSGUID.
My environment is SCVMM 2012 SP1 Rollup 2. My hosts are mixed with Windows 2008 R2 DataCenter Core and Windows 2012 DataCenter Full GUI. I removed a clustered host to re-image the system outside of VMM Console. During the removal, the server
went PENDING with no options to remove the server. After the rebuild of the OS, when adding the server back to the Cluster, the Job log shows "Error (21201) Another machine with the same SMBIOSGUID is found." Removal of the host and re-adding
the Host does not change the error. Removal of the Cluster and re-adding the cluster does not change the error. I know it is a SQL table that contains the GUIDs but have been unable to locate the table. Does anyone know where the SMSBIOSGUIDs
are stored in SQL other then the "dbo.tbl_ADHC_Host"?I have a similar issue...
I removed 2 nodes from my 2008r2 cluster without error via scvmm 2012 sp1, rebuilt the 2 nodes as 2012 clustered servers (full install not upgrade) and when i try add the 2 servers in with their new names scvmm
comes up with the same "another machine with the same SMBIOSGUID is found"
anyone?
Update: when i checked the vm tab, the 2 hosts did indeed install and refreshed ok, so not sure why the initial add virtual machine host job failed with the above error... -
I made an album just now. I went back to delete the pics from my camera roll but my only option is to "delete everywhere." I want to leave them in the new album I made.. How i can delete them from camera roll without deleting from other Album i made
The way that I understand that it works, is that the photos are not copied into the new albums, instead it just points to the photos - the number of photos on the iPad in Settings > General > About doesn't increase when you create new album so I assume from that that it isn't copying the photo, just pointing to it. So if you delete the photo from the camera roll you will therefore also be deleting all the pointers to it
-
even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold eddition.
Hi, Thilina66. You say you have entered the country code but still cannot make international calls. I suppose you are adding the international access code before the country code. This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
For example, to call a number in the UK from the US you have to dial:
011 44 7540 267898
or
+44 7540 267898
To call a number in the US from the UK you have to dial:
00 1 212 456 1470
or
+1 212 456 1470
Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard. -
Adding/Installing MXP Theme file to Eclipse (without AEM)
Adding/Installing MXP Theme file to Eclipse (without AEM)
Recently downloaded Adobe Flex (FlashBuilder 4 plugin LS10) for Eclipse, and going through some Tutorials where they want me to install a Theme to learn Styles.
They want me to install MXP file, but I cannot find where to. Every place on the web assumes you haev Adobe Extension Manager(AEM) installed, so I went and installed that, but even with that, it doesn't seem to find the Flex install (under eclipse) so won't allow me to install the Theme.
So how does one go about installing/adding a MXP file to Eclipse without the full Flex distribution (though with all the searching and talking/waiting for tech support - which they then directed me here) it probably would have been quicker to install the full dist.
But I figure I can't be the only one who would ask this so hopefully my pain will help someone in the future.
Thank you for any help.
JoeThere is no shortcut known to me to to prevent a file from being copied to the 'iTunes Music' folder.
To add a file to the library, without copying it to the 'iTunes Music' folder, uncheck 'Copy files to iTunes Music folder when adding to library' in Preferences>Advanced>General.
In the subject of this topic you are referring to 'importing', but from the contents of this topic, I presume you're only talking about 'adding'.
To understand the differences, read this article:
iTunes: About the Add to Library, Import, and Convert functions.
BTW: If you 'import' files, the files are always copied to the 'iTunes Music folder location' as set in the preferences, regardless of the status (checked/unchecked) of the checkbox of the 'Copy files to etc.......' setting.
Hope this helps.
M
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.9) iTunes 7.1.1 -
I have an iphone and ipad but no other computer at home. I used to have itunes on my work computer. How to I access and make changes to my itunes without another computer? thanks
At this point you have the option of keeping a device optimized version (lower resolution version) of your photo on your phone while iCloud stores a full resolution version. Or keeping the full resolution version on both your phone and the iCloud. If you delete the photo on your phone it will be deleted on the iCloud. I know, bummer. Also it should be noted that the photos app and the library are still in beta and to this point i see why. I would use dropbox or a smiliar app for off device storage.
So far this is how it has been working/not working for me. Whether or not I choose to keep originals or optimized on my phone it will only keep the originals and it has only been uploading lower resolution versions of my photos to the iCloud library. Seems to be working in reverse.
Again these are still in beta so i am hopeful that this will be fixed in the near future.
I hope this helps. -
How do i update the software on my ipod touch? i went to settings, then general, but theres no option called software updates.
You needing to be running iOS 5 or later in order to do a Software Update from the device. To run iOS 5 you need a 3G or 4G iPod Touch. So if you really have a 4G iPod Touch, connect it to iTunes and you should be prompted about an update to its version of iOS.
See here for more information: iOS: How to update your iPhone, iPad, or iPod touch
B-rock -
I can't seem to get my mail screen when I open it on my iPhone, the screen is blank now but earlier today i was unable to use the screen to select anything... Also I'm unable to open Safari, would anyone know what I need to do, I've deleted the account and added it again but nothing.... Thanks
The first step in user troubleshooting is to power the phone off/on. The next step is a reset, holding the sleep/wake and home buttons together until you see the Apple logo and then release, ignoring the slide to power off screen if it appears. If none of this helps, the next step is a restore, first from a backup and if no help, then as a new device. A reset does not affect data, however a restore will remove data from the phone. Make sure everything is backed up. Sounds like the email is not the only issue you have with the phone.
-
My ipod was set up on a Mac. Now I have a PC and want to sync my music on iTunes, but I can't without reformatting my drive and losing my music. Help. I no longer have a Mac. I want to keep the music and videos I purchased. Since it is an iPod classic (80GB) I cannot even use the iCloud. Is there a way to move my ipod's music so I can reformat it to my pc?
WIndows is asking you to reformat the iPod's hard disk because it's probably in the Mac OS X Extended Journaled file system format which the Windows OS can neither read or write to. Reformatting will erase all content from the device and rebuild the filesystem as FAT32 unless you specify it as NTFS (which you shouldn't do).
If you want to be able to use your iPod to copy music from your Mac to your PC, you'll need to either pre-format it as FAT32 using Disk Utility on your Mac and then copy everything over to your PC, or use third party software such as XPlay that allows a Windows PC to read and write to a Mac formatted iPod.
Perhaps you could take a look at this article for other ways to copy your iTunes library and files from your Mac to the PC.
iTunes: How to move your music to a new computer
B-rock -
How to read data from select Options in another view without using context
I have 2 views, one for selection screen and another for displaying result.
In selection screen view I have define a select options with the help of webdynpro component.
Now my object is display result in result view based on entry of selection screen.
I don't want to do binding in context node, without that how I can read data of select option
in result view?
Regards,
Rasmi Ranjan MishraSolve by own.
If I define the Select options in component controller, then it will be global in nature. so i can get the value of select options
in another view also.
Regards,
Rasmi Ranjan Mishra -
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin -
I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.
What is "Adobe XI" - Reader, or Acrobat?
But either way, 'Save as Adobe PDF' is a Word function, independent of what Adobe software you have installed. -
I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.
Hi Clarkett99,
To use an external hard drive for your iTunes library, see the steps in this article -
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
iPhoto can be used in a similar way, follow the steps in this previous discussion -
how do I save photos and their albums...: Apple Support Communities
https://discussions.apple.com/thread/3744259
Thanks for using Apple Support Communities.
Best,
Brett L -
cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?
I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).
-
Trying to connect my panasonic viera TV to my new Apple TV with a dynex 1080p hdmi cable but the hdmi option won't show up on my tv when I try to change the input. Any suggestions welcome!
Your profile claims Apple TV 2. 1080p is only available withe the Apple TV 3. Apple TV 2 is maxed out at 720p.
Hope that helps
Maybe you are looking for
-
File system task error ; Access to the path " " is denied
HI All, I have created a simple package to copy xml files from multiple source folders to destination folder. Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result
-
I am trying to erase my hard drive and start a new
I have an iMac 2.66GHz Intel Core 2 duo running Snow Leopard OS X 10.6.8 I have backed up all my files but after i restart and open up Disc Utility the erase tab is 'grey' and will not allow me to select it. I no longer have the DVD that came with a
-
How to center selected text in document window?
I'm using Word.select( SelectionOptions.REPLACE_WITH) to iterate through a list of words in a document. It would be handy if any off-screen selections could be automatically scrolled into the document window, as with Find/Change. Is there any way to
-
Flash Player not displaying control bar: pause, stop, full screen, etc
How do I change settings to allow the control bar to appear? Thanks.
-
I want to install window7 on my macbook pro but i do the wrong way
I want to install window7 on my macbook pro but i do the wrong way my gf she use macbook pro then she want to use windows program so she just put window7 cd then she restart and boot from cd rom and she just format all drive from window7 installer af