Added audio drivers, now reboots before Xserver starts
to fix my audio problem, I installed the audio drivers from http://www.tools.de/solaris/audio/, now after getting to the interactive boot prompt, the system restarts back at the bios..
doah..
help
Sam
I fixed this with a re-install. couldn't figure out how to get in to a command line prompt with enouhg system access to fiddle with the driver install.
Sam
Similar Messages
-
Z1 automatically reboots before it starts
Hi,
My Sony Xperia Z1 worked perfectly until Saturday. When I tried to turn it on in the morning, it asked me the pin for the sim card, but instead of showing the home screen, it rebooted right away. After that, booting process didn't even last long enough to ask for the pin. I just displays the logos Sony, Experia, Yoigo (name of the phone company), sometimes the next animation screen, and then it freezes and reboots.
I had an update pending to install, but I didn't start the process, so I think the phone system was rather stable when I turned it off on Friday evening.
My problem is that I would like to restore the system. I can't use the Android menu, because Android doesn't start at all. I would like the "factory restore menu" to come out but I haven't found out how. Booting with Power button + Volume (up or down doesn't make a difference) doesn't change anything. When I turn the phone on I just see it rebooting over and over again.
Does somebody have a clue of what's going on with the phone? or, at least, do you know how to restore it to the factory settings? Never mind if I loose all data, everything should be syncronized with my google account.
By the way, the phone is not rooted, neither have I flashed the ROM or anything like that.
Thanks in advance for your help.
Solved!
Go to Solution.PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
My phone was never added to my iTune devices. Now it is not starting and I am not able to back it up before resetting to the factory settings.
Then you are out of luck with wanting to create a backup for your iPhone first. This could have been done wirelessly with a free Apple iCloud account without needing to use iTunes on your computer to do so. This is similar to not creating a backup for your computer, your computer hard drive crashes and wanting to back up the hard drive before reformatting the hard drive.
-
Multiple cold dtart reboot problem may be linked to Audio drivers!
All-
I received my RMAed board (975x PUE) back 2 weeks ago as there was a problem with my board. Re-installed everything...after afinally figuring out that no other drives but the SATA raid volume need to be in for install or raid volume will not be C: Everything was working fine until I loaded my Audigy Gamer sound card drivers, then windows could not start-up normally. I ripped out the card and restored windows to before the indtall. Everything back to working. So then I decided to install the on-board audio driver and bango! Lot's of cold boot and reboot problems. It usually takes 2-3 tried before windows will come up properly. I have downloaded the latest drivers for both MSI and Realtek...problem still remains.
Any ideas?I have not flashed the bios and it is the on-board sound! Any idea why cold boot and re-start take multiple tries?
Mark -
How do I get my bookmarks back, I downloaded version 4.0 that said it is compatible with all versions of OSx. Which it is not!!! So now it won't start FireFox, before I do anything else how do I get my bookmarks back?
THe phone is NOT jail broken.. all i want to do is have it return back to how it was before i started the updae version process obviously it did not take and now it is locked into plave the screen will not change.. after reboots and shut down when i turn it back on the same screeen appears the cd disc with the music note over it and the arrow pointing upwards and a picture of the small end of the charge cord that fits into the actual compute.. The phoen is not jail broken all i want is to get my phone back so i can use it i logged into i tunes and there is no where on the page that gives direction to return it back to its original format prior to trying to up grade .. whe at do i need to do to unlock the frozen compent and reutrn it back to its normal point prior to trying the upgrade
-
Reinstalling Audio drivers after every reboot
Hi,
I have a P750 PSAY3A-02J001 which i gor in australia.
Recently I had to buy a new hard drive (as the old was scratched) and have windows 7 reinstalled. This was done in England.
After this I then restored from my external Hard drive.
After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
After every reboot I have no sound when playing movies etc and have to reinstall the drivers again.
I have saved the folder on my desktop (for ease to reinstall every time) however Im wondering if the Laptop is not starting up this driver or its being saved in the wrong spot? any way to fix this?
Also I was attempting to use the Toshiba doanloads section to update everything however under my Model P750 there is no PSAY3A-02J001 (my model doesnt seem to exsist?)
Many thanks in advanceSatellite P750/02J (PSAY3A-02J001)
You didn't find your machine listed here because this site is only for US computers.
Downloads for your Aussie model are here.
After this I then restored from my external Hard drive.
Please tell us all about that backup image. Exactly which application are you using?
After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
What is the make and specific model of the new hard drive? If it uses advanced-format technology, that may be the source of the trouble.
-Jerry -
I am rajendra i have compaq presario v2000 note book now i reload os winxp audio drivers not instal
Sir I am rajendra kumar I have compaq presario v2000 lap top I reinstal winxp os now I can't install audio drivers Please solve my problem
I noticed this is your first post, a comprehensive post just for asking XP drivers.
Please read XP downgrade guide, part 2, here
Your model, somehow forgot to be listed in part 2, but in general, part 2 should work for your model.
Read the guide so that you knew the advantages/disadvantages installing XP for your model.
About your request, try the following drivers
1.For Intel 965 Express Chipset Family, Here
2.Conexant High-Definition SmartAudio 221 Driver
Driver modded by silver here
Unzip to a folder..use Device Manager,right click "Audio Device on HD",choose Update driver,
No to connect,
Install from a list or specific location,
Select Don't Search, I will choose the driver to install,
For the Hardware Type select 'Show All Devices'
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains.
Reboot.
Please post again If you found the mic and external speaker are not working perfectly.
Post it with your Hardware ID.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD -
Idvd freezing before it starts encoding audio
Hi everyone, i was wondering if someone could help me with a problem i'm having with idvd. Everytime (6 times so far) my dvd is encoding the video it will suddenly freeze just before it starts audio encoding. What does this mean and is there any way to prevent it?
This question is frequently asked!
iDVD is probably not 'hanging'. Disregard any messages that iDVD is not responding. It is. Do not force quit.
Encoding audio is the slowest part of rendering, and can take many hours. Great patience, even an intermittent alternative hobby, is called for.
Make sure no other application is running, make sure you have not set the hard disk to go to sleep and that the screen saver will not come on. Leave it overnight, or have a 36 hole game of golf.
Sooner or later iDVD will finish! -
Hi! I have had the Creative Cloud in use before and now I want to start using the programs again. How do I do that?
restart a subscription, https://creative.adobe.com/plans
-
Hi all,
My recently installed (Windows 8.1) Acrobat Pro (part of CS6) suddenly stopped working - now it won't start.
This happened on Windows 7 in 2012 and was eventually fixed.
Any advice on what I should do? [I can't find where to post a question to the adobe help people]
- DuncanWell, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on* -
"Render and replace" now converts to .mov, not audio wav files like before
In previous versions, the "render and replace" functionality allowed you to quickly extract audio from clips and turn them into audio files. Now in CC 2014 the audio gets replaced with another movie file with no video track. This is useless when trying to convert audio clips to .wav format for editing in 3rd party audio apps, which is what made it so great in the first place. Additionally this breaks functionality with PluralEyes, which required that you rendered and replaced segmented video clips like those from the C300. Now PluralEyes rejects the created .mov files with an "unsupported format" error.
Why was this changed? How do I change it back?I too am now dipping my toes into Premiere Pro CC 2014 and just ran into this as well. Jeez!!!! Using Pluraleyes like you and just need to convert the audio portions to .mov audio. Now what????? I thought there might be 'presets' that were downloadable but I can't easily locate any. Why does Adobe do these things?
-
A quick primer on audio drivers, devices, and latency
This information has come from Durin, Adobe staffer:
Hi everyone,
A common question that comes up in these forums over and over has to do with recording latency, audio drivers, and device formats. I'm going to provide a brief overview of the different types of devices, how they interface with the computer and Audition, and steps to maximize performance and minimize the latency inherent in computer audio.
First, a few definitions:
Monitoring: listening to existing audio while simultaneously recording new audio.
Sample: The value of each individual bit of audio digitized by the audio device. Typically, the audio device measures the incoming signal 44,100 or 48,000 times every second.
Buffer Size: The "bucket" where samples are placed before being passed to the destination. An audio application will collect a buffers-worth of samples before feeding it to the audio device for playback. An audio device will collect a buffers-worth of samples before feeding it to the audio device when recording. Buffers are typically measured in Samples (command values being 64, 128, 512, 1024, 2048...) or milliseconds which is simply a calculation based on the device sample rate and buffer size.
Latency: The time span that occurs between providing an input signal into an audio device (through a microphone, keyboard, guitar input, etc) and when each buffers-worth of that signal is provided to the audio application. It also refers to the other direction, where the output audio signal is sent from the audio application to the audio device for playback. When recording while monitoring, the overall perceived latency can often be double the device buffer size.
ASIO, MME, CoreAudio: These are audio driver models, which simply specify the manner in which an audio application and audio device communicate. Apple Mac systems use CoreAudio almost exclusively which provides for low buffer sizes and the ability to mix and match different devices (called an Aggregate Device.) MME and ASIO are mostly Windows-exclusive driver models, and provide different methods of communicating between application and device. MME drivers allow the operating system itself to act as a go-between and are generally slower as they rely upon higher buffer sizes and have to pass through multiple processes on the computer before being sent to the audio device. ASIO drivers provide an audio application direct communication with the hardware, bypassing the operating system. This allows for much lower latency while being limited in an applications ability to access multiple devices simultaneously, or share a device channel with another application.
Dropouts: Missing audio data as a result of being unable to process an audio stream fast enough to keep up with the buffer size. Generally, dropouts occur when an audio application cannot process effects and mix tracks together quickly enough to fill the device buffer, or when the audio device is trying to send audio data to the application more quickly than it can handle it. (Remember when Lucy and Ethel were working at the chocolate factory and the machine sped up to the point where they were dropping chocolates all over the place? Pretend the chocolates were samples, Lucy and Ethel were the audio application, and the chocolate machine is the audio device/driver, and you'll have a pretty good visualization of how this works.)
Typically, latency is not a problem if you're simply playing back existing audio (you might experience a very slight delay between pressing PLAY and when audio is heard through your speakers) or recording to disk without monitoring existing audio tracks since precise timing is not crucial in these conditions. However, when trying to play along with a drum track, or sing a harmony to an existing track, or overdub narration to a video, latency becomes a factor since our ears are far more sensitive to timing issues than our other senses. If a bass guitar track is not precisely aligned with the drums, it quickly sounds sloppy. Therefore, we need to attempt to reduce latency as much as possible for these situations. If we simply set our Buffer Size parameter as low as it will go, we're likely to experience dropouts - especially if we have some tracks configured with audio effects which require additional processing and contribute their own latency to the chain. Dropouts are annoying but not destructive during playback, but if dropouts occur on the recording stream, it means you're losing data and your recording will never sound right - the data is simply lost. Obviously, this is not good.
Latency under 40ms is generally considered within the range of reasonable for recording. Some folks can hear even this and it affects their ability to play, but most people find this unnoticeable or tolerable. We can calculate our approximate desired buffer size with this formula:
(Sample per second / 1000) * Desired Latency
So, if we are recording at 44,100 Hz and we are aiming for 20ms latency: 44100 / 1000 * 20 = 882 samples. Most audio devices do not allow arbitrary buffer sizes but offer an array of choices, so we would select the closest option. The device I'm using right now offers 512 and 1024 samples as the closest available buffer sizes, so I would select 512 first and see how this performs. If my session has a lot of tracks and/or several effects, I might need to bump this up to 1024 if I experience dropouts.
Now that we hopefully have a pretty firm understanding of what constitutes latency and under what circumstances it is undesirable, let's take a look at how we can reduce it for our needs. You may find that you continue to experience dropouts at a buffer size of 1024 but that raising it to larger options introduces too much latency for your needs. So we need to determine what we can do to reduce our overhead in order to have quality playback and recording at this buffer size.
Effects: A common cause of playback latency is the use of effects. As your audio stream passes through an effect, it takes time for the computer to perform the calculations to modify that signal. Each effect in a chain introduces its own amount of latency before the chunk of audio even reaches the point where the audio application passes it to the audio device and starts to fill up the buffer. Audition and other DAWs attempt to address this through "latency compensation" routines which introduce a bit more latency when you first press play as they process several seconds of audio ahead of time before beginning to stream those chunks to the audio driver. In some cases, however, the effects may be so intensive that the CPU simply isn't processing the math fast enough. With Audition, you can "freeze" or pre-render these tracks by clicking the small lightning bolt button visible in the Effects Rack with that track selected. This performs a background render of that track, which automatically updates if you make any changes to the track or effect parameters, so that instead of calculating all those changes on-the-fly, it simply needs to stream back a plain old audio file which requires much fewer system resources. You may also choose to disable certain effects, or temporarily replace them with alternatives which may not sound exactly like what you want for your final mix, but which adequately simulate the desired effect for the purpose of recording. (You might replace the CPU-intensive Full Reverb effect with the lightweight Studio Reverb effect, for example. Full Reverb effect is mathematically far more accurate and realistic, but Studio Reverb can provide that quick "body" you might want when monitoring vocals, for example.) You can also just disable the effects for a track or clip while recording, and turn them on later.
Device and Driver Options: Different devices may have wildly different performance at the same buffer size and with the same session. Audio devices designed primarily for gaming are less likely to perform well at low buffer sizes as those designed for music production, for example. Even if the hardware performs the same, the driver mode may be a source of latency. ASIO is almost always faster than MME, though many device manufacturers do not supply an ASIO driver. The use of third-party, device-agnostic drivers, such as ASIO4ALL (www.asio4all.com) allow you to wrap an MME-only device inside a faux-ASIO shell. The audio application believes it's speaking to an ASIO driver, and ASIO4ALL has been streamlined to work more quickly with the MME device, or even to allow you to use different inputs and outputs on separate devices which ASIO would otherwise prevent.
We also now see more USB microphone devices which are input-only audio devices that generally use a generic Windows driver and, with a few exceptions, rarely offer native ASIO support. USB microphones generally require a higher buffer size as they are primarily designed for recording in cases where monitoring is unimportant. When attempting to record via a USB microphone and monitor via a separate audio device, you're more likely to run into issues where the two devices are not synchronized or drift apart after some time. (The ugly secret of many device manufacturers is that they rarely operate at EXACTLY the sample rate specified. The difference between 44,100 and 44,118 Hz is negligible when listening to audio, but when trying to precisely synchronize to a track recorded AT 44,100, the difference adds up over time and what sounded in sync for the first minute will be wildly off-beat several minutes later.) You are almost always going to have better sync and performance with a standard microphone connected to the same device you're using for playback, and for serious recording, this is the best practice. If USB microphones are your only option, then I would recommend making certain you purchase a high-quality one and have an equally high-quality playback device. Attempt to match the buffer sizes and sample rates as closely as possible, and consider using a higher buffer size and correcting the latency post-recording. (One method of doing this is to have a click or clap at the beginning of your session and make sure this is recorded by your USB microphone. After you finish your recording, you can visually line up the click in the recorded track with the click in the original track by moving your clip backwards in the timeline. This is not the most efficient method, but this alignment is the reason you see the clapboards in behind-the-scenes filmmaking footage.)
Other Hardware: Other hardware in your computer plays a role in the ability to feed or store audio data quickly. CPUs are so fast, and with multiple cores, capable of spreading the load so often the bottleneck for good performance - especially at high sample rates - tends to be your hard drive or storage media. It is highly recommended that you configure your temporary files location, and session/recording location, to a physical drive that is NOT the same as you have your operating system installed. Audition and other DAWs have absolutely no control over what Windows or OS X may decide to do at any given time and if your antivirus software or system file indexer decides it's time to start churning away at your hard drive at the same time that you're recording your magnum opus, you raise the likelihood of losing some of that performance. (In fact, it's a good idea to disable all non-essential applications and internet connections while recording to reduce the likelihood of external interference.) If you're going to be recording multiple tracks at once, it's a good idea to purchase the fastest hard drive your budget allows. Most cheap drives spin around 5400 rpm, which is fine for general use cases but does not allow for the fast read, write, and seek operations the drive needs to do when recording and playing back from multiple files simultaneously. 7200 RPM drives perform much better, and even faster options are available. While fragmentation is less of a problem on OS X systems, you'll want to frequently defragment your drive on Windows frequently - this process realigns all the blocks of your files so they're grouped together. As you write and delete files, pieces of each tend to get placed in the first location that has room. This ends up creating lots of gaps or splitting files up all over the disk. The act of reading or writing to these spread out areas cause the operation to take significantly longer than it needs to and can contribute to glitches in playback or loss of data when recording.There is one point in the above that needed a little clarification, relating to USB mics:
_durin_ wrote:
If USB microphones are your only option, then I would recommend making certain you purchase a high-quality one and have an equally high-quality playback device.
If you are going to spend that much, then you'd be better off putting a little more money into an external device with a proper mic pre, and a little less money by not bothering with a USB mic at all, and just getting a 'normal' condensor mic. It's true to say that over the years, the USB mic class of recording device has caused more trouble than any other, regardless.
You should also be aware that if you find a USB mic offering ASIO support, then unless it's got a headphone socket on it as well then you aren't going to be able to monitor what you record if you use it in its native ASIO mode. This is because your computer can only cope with one ASIO device in the system - that's all the spec allows. What you can do with most ASIO hardware though is share multiple streams (if the device has multiple inputs and outputs) between different software.
Seriously, USB mics are more trouble than they're worth. -
T530 - 2429-BQ7 - Unable to locate audio drivers
Hello,
My workplace recieved a few of these units, and they appear to be missing Sound Drivers. I went to the drivers section, and I cannot locate my model number. BQ7 is not listed there.
I downloaded System Update 5, and thought it would pick up the sound driver to update, but it also does not pick it up.
Lastly, I went to the Driver Matrix section, picked T530, downloaded the realtek 85mb file, installed it, but stil nothing after a reboot.
In the system panel, it indicates about 4 missing drivers for a "Nvidia High Defination audio bus", and 1 missing driver for a RealTek High Defination bus"
I also tried upgrading the Nvidia drivers video/audio drivers thinking its related, but no luck. Cant find any audio nvidia driver, only video
Please help
can anyone direct me to the correct driver?Have you call the support line. Rather than guessing and adding driver packages on a whim that it may be the right one.
They should not be missing from the image supplied on the system to start with. There is also a driver pack store of these package already on all machines up to Windows 7.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3 -
Solution to Sound flowers corruption of MAC Audio drivers
Solution to Sound Flower corruption of Mac Audio drivers
I recently upgraded/ repaired my 2011 Mac Book Pro. I went from 4GB to 16 GB of ram. I also removed the Super Drive and 750 GB dual partition hard drive. I replace them with a 2tb single partition drive for the MAC OS system, and a 480 dual partition SSD drive. I allocated 450 for the Boot camp PC drive and remainder for an SSD Mac OS drive. During this process, I also repaired my corrupted Mac Audio drivers. Here is how I repaired them.
#1………..You will need a bootable external hard drive which contains a current copy of your Applications, Data, and Network settings. You should already have this drive or drives with partitions containing boot PC boot camp and Mac OS. If you do not, you need to make one now.
I used Carbon Copy V5 to make a bootable copy of Mac OS and WinClone 4 to make a bootable copy of PC partition.
It does not matter that the Mac Drivers are currently corrupted if you are making a bootable copy of your internal drive. Just created the external bootable drive. For me, a nearly full 750GB drive took me over 4 hours to create.
#2……….Once the external bootable drive is created, you will need to restart your computer while holding down the option key. When it asks which drive to boot from, choose the External Mac recovery drive. Make sure this new drive is working properly and all your information is there.
#3……….Now that you are operating from external drive, use disk utility to select the internal mac OS drive and erase it. I have a separate drive for My PC boot camp, so I will keep this as a single partition drive for Mac OS.
#4………Download a new copy of the MAC OS system onto internal drive. During this process DO NOT sign in into you Apple Id account. At this point you do not want Applications or data moving over onto your new Mac OS. Once installation is done, restart computer.
#5…….The computer will now boot from the internal drive. You should see basic Applications in Launch Pad. Go ahead and play something from the internet ….you will notice your Mac audio drivers have been restored.
#6 …….Now it is time to add your Applications you have purchase over the years. Without bringing over Sound Flower App or its Folder. You do this by opening up an Apps windows for the internal Mac drive and another one for the external Mac drive. At this point you will manually drag all Apps from external drive to internal drive. However take your time and DO NOT dray over the sound flower app or its folder. If there are other Apps you to leave behind, do not drag them onto the new internal drive. Once you have verified you dragged over the Apps, restart your computer
#7 ………At this juncture, you can now use the migration assistant to move over your data and network settings. Just be sure to uncheck the migrate Applications box. If you forget, you are screwed and must start all over. I know from experience. Note the migration of data and network settings took me about three hours.
Final step …….Now that your Audio drivers, Applications, Data, and network settings are restored, you need to schedule time to update your external bootable Mac OS drive, so it no longer contains corrupt Audio drivers. Now enjoy your computer and pass solution on.
Xie xie
DmatcytAhh... Sorry for that. That's true. I took it for granted before checking Apple Specs.
So, What's about audio in specs of 15-inch MacBook Pro (MD103LL/A)? -
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.
Maybe you are looking for
-
Problem printing Lightroom 5.4 on OSX 10.9, Mavericks to Epson Stylus Photo R2400
When I print, only the lower left 3rd of the page has any ink on it and it is only a window into the middle of the image. The quality of the print is fine and it prints normally in Photoshop CS6. What's up with LR 5.4? I have tried everything from re
-
Hi @all, My Java engine has stopped.I am also not able to run the configtool.bat...below is the error that i get. Error occurred during initialization of VM java/lang/NoClassDefFoundError: java/lang/Object Program terminated abnormally Press any key
-
i develop a web service from a java class that has get and set method for a int variable. first i call set method of web service then i call get method.But i lose the value set before. Is it possible to store the value of the variable for the session
-
I click on the Thunderbird shortcut and Windows immediately tells me the programme has stopped working. It then tells me that "a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avai
-
Why can't I open iTunes or apps on ipad1? And why do apple not support the latest update for ipad1 when it's less than 2 years old. I am sick of huge corporations ripping off joe public!