Added Lines not Totaling

I have a Parts Estimate flowed form with a button to add more lines if needed. All the lines total correctly and total in the Total Estimate at the bottom on the page. But the added lines will not total on their own line, it just tabs over it.
Everything else works fine but the subform added lines.
I've looked the scripts over but not sure where I'm going wrong.
Tks...
HHud

Hi HHud, Are you using FormCalc or JavaScript? You will need to cause the calculate event to fire again, either explicitly with execCalculate or referencing something in the changes like the instance managers count property. You don't have to do anything with it, just referencing it will setup a dependency. Bruce

Similar Messages

FS10N balance not tie with FBl3N line item totals

Hi
I searched the forum for posting on FS10N and FBL3N incorrect balances and I did not any post appropriate for my issue. Hence I am posting my issue here.
For a particular month, say 072010, FS10N GL balance does not tie with FBL3N line item totals. I am not sure why. In our case, we did not archive any line items and this is not related to year end carry forward. Year beginning GL balances look fine. We dont have any negative postings. Only few GL balances are off. We are using 4.7 version.
Do you know why this inconsistency and how to rectify it? Is there any program which I run apart from Yead End carry forward?
any ideas really appreciated.
Thanks

Hello
We have already this trouble.
To correct it you need to proceed like this (when NewGL is not activate, with new Gl there is one new programm)
Without newGL
- Block account to be posted (transaction FS00 Block for posting in the company view)
- Delete open item, by using the programm RFSEPA03 (you need to adapt it by a copy because if you don't you can't run it), also this programm will unflag your account in the company view
- Delete line item by the standrd program RFSEPA04
- Create the line item by the standard program RFSEPA01
- if this account is managed by open item, run the programm RFSEPA02 (you need to do the same adjustement of the RFSEPA03)
With NewGL, there is something new. the program RFSEPA02 is linked with a new transaction and you don't have to adjust it FAGL_ACTIVATE_OP. The difference is when you create the open item, you have to define the default profit center and default value depending of the customizing of the leading ledger.
BBest regards
Philippe,
Thanks for the rewards.

Currency conversion - Line item total does not tally with account balance

hi guys!
we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
1. while trying to run program RFSEPA02 the following error is appearing-
   -Line item total does not tally with account balance
2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

put a break-point @
if t_balance_items_hw[] <> t_balance_account_hw[] or
     t_balance_items_tw[] <> t_balance_account_tw[].
    perform dequeue_account.
    message e099.
*   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
endif.
endform.                               " CHECK_ACCOUNT_BALANCE_2
and debug y it is getting the error.
Short text
Switch On Open Item Management by Changing Master Record
Description
This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
Requirements
No items can already be archived from this account.
Caution: Company policy must be in place to ensure that this does not happen.
Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
Output
When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
Regards
Prabhu
Message was edited by: Prabhu Peram

Schedule lines not generated after MRP run

Dear All,
I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel and its PurRqs when i check in MD04 , the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
2.Maintained Inforecord.
3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
4. Quota arrangement for this vendor only.
5. Created New scheduling agreement.
6. Material is not sent for subcontracting.
7. Ran MD02 with following parameters ,
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Adapt planning data (normal mode)
Please let me know if i am missing something
Thanks in Advance
Benny

Hi,
Please check the below links...
Schedule Lines not getting created in MRP
Schedule Lines not generated for MRP Type PD
Kuber

Difference between cumulative balance and line items total in FS10N

hi,
when I am executing FS10n, I observed that the cumulative balance amount is not equal to line items total . This is due to some amounts in previous years are varying from the line ltem totals in those periods of previous years.
This is not happening with QA server only Prdn server is facing this problem. Can anybody provide me a way to solve this..!?
Regards,
AJo
I have checked the master data for the GL and the check box for line item display is selected. It has not been changed for years.
Edited by: Anil Jonnalagadda on Oct 22, 2008 10:57 AM

Hi Anil,
The reason for the differences that you are viewing can be various. As the differences are found in the cummulative balance then it means that the differences might have occurred in previous fiscal years. The first stetp is to find when these differences were originated: You can run report SAPF190 (in se38) for previous fiscal years, and company code in question- This report should show the differences with message "Errors" in the log. If differences are found then you have to creeate a message and send it to SAP for further analysis and corrections.(only SAP experts can do this kind of corrections - component FI-GL-GL-X)
Also bear in mind that if you did archiving in previous fiscal years then this would not be an error:
If you already did archiving and secondary index deletion on this accounts with SAPF048I. So this explains why line items balance and GL summary balance differ ! There is no programm error.
See consulting note 81489 which describes this issue:
The balance of an account results from the balance of the open items. In
connection with an archiving that has been carried out, the line item
display - used with cleared items - must not therefore be interpreted as
a balance display. For the balance display, there are separate
correspond to the display balance of the open items from the line item
display.
Having archived and deleted secondary indexes ( with SAPF048I )
for an account you can not use line item drill down as a balance
display any more for a line item managed account.
( as not all line items are existing any more in table BSIS ! )
The transactions meant to display the binding balances are FS10N,
FK10N and FD10N.
They also give you the line items details, but only of those line
items not yet deleted ( by SAPF048I ).
kind regards,
Oscar Diaz

Frame line not display in next page of main window

hi Xpert,
I am creating layout in SAP SCRIpt,it working fine only the main window of next page frame line is not display.
i m define next page as a FIRST page and writing main window of first page following coding
/:           POSITION XORIGIN '0.50' CM YORIGIN '7.75' CM
/:           SIZE HEIGHT '17' CM WIDTH '19.25' CM
/:           BOX FRAME 10 TW
when i run the program first page are coming properly and only when i go in second page of output then main window lines not displaying.
please guide me how to solve this problem.
Regards,
pravin

Hi Praveen,
In that case why you have to make the main window in the first page and secondry window.
You can use it as manin window itself. Print the total amount in the main window itself in the first page. and copy that main window to the second page.
In the first page under the main window create a text. and there u print the total value and text.
Now copy the main window to the second page..only COPY DONT CREATE NEW.
In the second page now under the main window create the table to print the line items. What every u add in the second page main window it will come in the first age also in the smartforms. But it will nto get printed in the first page.After the text to print the totals call the COMMAND option and call next page in that.
Hope you got me..
Regards
Ansari

Adding line item prior to ACC_DOCUMENT03 Posting

Due to our legacy currency alignment on some systems being incongruent with our SAP ECC 6.0 environment, some upstream inbound IDocs will post with 2 decimals for HUF when 6.0 environment has 0 decimals for HUF. The inbound documents are coming in as ACC_DOCUMENT03 IDocs.
There will be rounding involved. iN certain cases, the rounding will mean that the line items are no longer in balance.
Rather than alter the value of the inbound line items, preference is to add line item prior to posting that contains the balance difference and posts to the "rounding difference" account.
Has anyone expereinced this situation before? How was it resolved?
Considered adding line item via "BAPI_ACC_DOCUMENT_POST" or, if possible, within "'BAPI_INCOMING_INVOICE_CREATE'".
Has anyone faced this or a simlar issue before? How was it resolved? Was it resolved internally?

Hello Weng,
I also looked on SAP notes.
There is a note with much information about Tax Postings with accounting BAPIs and it's a consulting note. The note number is 626235.
Regards,
Rae Ellen Woytowiez
Edited by: Rae Ellen Woytowiez on Dec 21, 2010 10:11 PM

How to set the focus on the new added line in ALV list (OO)

Dear Friends,
I have an ALV list based on OO(using alv_grid->set_table_for_first_display), when I click the 'new' button to add a new line, the mouse arrow is always pointing to the first line - not the new created line for user to input!!.
So how to set the focus (mouse arrow) on the new added line in ALV list for user to input it friendly?
Thanks a lot!!

Hello,
To get the selected line row first we have get all the rows in the internal table.
When u click on the button when it is creating the new line we have to pass the row number to the call method
CALL METHOD <ref.var. to CL_GUI_ALV_GRID > ->get_selected_rows
   IMPORTING
      ET_INDEX_ROWS =   <internal table of type LVC_T_ROW > (obsolete)
      ET_ROW_NO      =   <internal table of type LVC_T_ROID > .
CALL METHOD<ref.var. to CL_GUI_ALV_GRID>->set_selected_rows
   EXPORTING
      IT_ROW_NO = <internal table of type LVC_T_ROID>
   or alternatively
   IT_INDEX_ROWS = <internal table of type LVC_T_ROW>
      IS_KEEP_OTHER_SELECTIONS = <type CHAR01>.
http://help.sap.com/saphelp_erp2004/helpdata/EN/22/a3f5ecd2fe11d2b467006094192fe3/content.htm

Add an in-line notes panel and some kind of notification.

It would improve our workflow if my designer could see In-line notes as they are added to the document, and get some sort of pop-up notification when a new in-line note is added. Our current process is to have the designer search through the document periodically and is in-efficient. We used a plug-in for CS4 that was provided by a vendor, but they have not updated for CS5 yet.

sorry the site's Ui was really laggy that day
I found this cool chrome extension called Cisco Dialer.
It works wonderfully with a simple setup (just put in the phone's IP address) hover over a gmail contact's number and a little phone pops up on the right hand side - click it and it automatically dials it through your cisco phone. I just wish this extension was chrome wide, not just for gmail contacts.

How do you enter and display album liner notes

Ipod Touch, 16gig, 2nd generation. I have a sizeable jazz collection and am ripping a lot of CDs. No problem on adding album art. Question is, how can I enter album information such as side men (like the album may be Cannonball Adderley, but I want to note that John Coltrane played tenor on tracks x, y and z), when the album was recorded and where, historic facts of interest, etc. When I right click an album I've entered in the music section, I go to a page where I add my album art and I see a comments section. Is that it? But, as important, when I'm listening to the album on my Touch, how do I retrieve the notes on the Touch screen to read them?
Thanks for any help!

Paste the liner notes into the lyrics field in iTunes. They will then be visible on the Touch when you tap the album art (not in Coverflow)

Ibook not totally downloading just on iPads

Hi all.
There's this one book I've purchased from the ibooks store that I can only read if connected to the internet. When off-line, it opens just to say something like "it's not totally downloaded, please download it again". I know the author, and the book has been formatted in Ibooks Author and is therefore "made for Ibooks". On my desktop Mac, that doesn't happens. And of course, I erased the book and re-downloaded several times...
Any ideas?

Hey andrevallejo,
If an iBook is not opening on your Mac, the first thing I would suggest is to make sure you have the latest version of OS X and iTunes installed.
Then download the book again:
Download past purchases - Apple Support
http://support.apple.com/en-us/HT2519
Download previous purchases on Mac or PC
Make sure your Mac or PC meets these system requirements:
iTunes 10.3 or later
You need iTunes 10.6 or later to download previously purchased movies and TV shows.
iTunes account in a country where iTunes in the Cloud is available
iTunes Store
Open iTunes and go to the iTunes Store.
Click Purchased in the Quick Links section.
Select the content type that you want to download (Books).
Select Not in My Library to view purchased content that isn't on your computer.
Find the item that you want to download.
Click the Download icon next to the item you want to download.
If an item is already in your library, the Download icon won't appear.
Make sure your computer is authorized using the Apple ID that you used for the original purchase.
Make sure your iPhone, iPad, iPod touch, Apple TV, Mac, or PC is associated with your Apple ID.
If you can't find the item that you purchased in the iTunes Store, report a problem with the item. You can report a problem with a purchase made within the last 90 days.
I hope this information helps ....
- Judy

Information CD Album Art, Liner Notes, etc.

Hi:
Is this on the CDs when you buy them, of is this additional infromation that must be downloaded from a database somewhere ? If the information is on the CDs, how do I obtain access to the files...in other words, what do I have to do in order to be able to see the files (art iconms, liner notes, etc.), move them to other folders if need be, view them, etc. What exactly are liner notes ?
Thank you
DaleB

*Is this on the CDs when you buy them, of is this additional infromation that must be downloaded from a database somewhere*
CDs don't contain artwork, you can either add the artwork manually or if the album is available in the iTunes store you can download it from there. You'll get information on both methods at this link: iTunes 7 for Windows - Adding artwork to songs and other items
if you can't find the album covers you want from iTunes you can get them from various other sources. I find this site is a good source of artwork: CD/Album Cover Art Search from SlothRadio.
Another place for finding suitable artwork is to go to Amazon. You can also locate artwork using Google image search and put the artist or album name. Locate the album from any of those sources, right click on the image and save it to the desktop, once it's there drag it to the iTunes artwork pane. Once you've added the artwork you can either delete the original file or keep it in a folder somewhere in case you need to use it again. Alternatively there are programs like these that help locate artwork: iTunes Art Importer or MP3 Tag
If you have a scanner you can create your own artwork files by scanning the CD cover itself, this is particularly useful when you are dealing with rare recordings.
*What exactly are liner notes ?*
It's the information printed for you to read in your CD booklet. Who played on the CD, where it was made, dedications to the artist's friends and family etc. etc.

I just upgraded to the latest version of iTunes and it duplicated virtually every track in my music library. I need a quick way to delete the duplicates. Sorting by "Date Added" will not help because they are all listed as added on 12/12/2011.

Library Duplicated
I just updated to the latest version of iTunes and it duplicated virtually every track in my library. I need a quick way to delete the duplicates. Sorting by "Date Added" will not work, because every track is listed as added on 12/12/2011 even though this happened today 12/19/2011.

I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
tt2

2 iPhones in my house, both on the same Apple ID. Just got iPad mini, want to use iMessage with my phone number, but iPad only picks up other more recently added number (not mine) when I go to message settings. Is there a way to default to other number?

Hi guys, so we have 2 iPhones in my house, both on the same Apple ID so that my mum and I can share everything. I have just got an iPad mini, and would like to use iMessage on it with my phone number, but the iPad only picks up other more recently added number (not mine, my mums) when I go to message settings. Is there a way to make the iPad default to other number?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

Added Lines not Totaling

Similar Messages

Maybe you are looking for