Added Memory, but not showing up in System Profilier

I have an iBook G4 1.2Ghz/12-inch screen laptop. Bus speed 133 MHz. It has 256 MB built-in memory. I added a stick of 512 that is appropriate for this computer. (PC 2100) It is seated correctly, and the clips are in place.
However, when I go to the System Profiler, it still only shows my Built-In Memory, and shows that the DIMM1/J7 Memory slot is Empty.
Is there something I need to do to get my computer to recognize the added hardware?
The odd thing is, my computer really does seem to be using the added memory, as I can now have multiple applications open without slowing or freezing.
Thanks,
Sonya

You are correct. When the Mac starts up it checks for RAM, no configuration needed on your part. I would suggest taking the chip out and putting it back in to make certain it's pushed in correctly. It should actually "snap" or "click" softly into place.
-Doug

Similar Messages

  • Tom voice downloaded but not showing up in system voices

    hello all, i recnetly restored my mac back to os x mountain lion from a backup, when i download the tom voice it gets installed but doesnt show up in the system voice box, how do i fix this?

  • Imported PowerPoint slides, added highlights, but not showing in publishing

    Hi...I'm a little confused.  I imported a 15 slide powerpoint
    file into Captivate and added audio, a few highlights and several animated buttons. I published 1 version and the animation showed up, but when I recreated another project, I get none of the animation showing up in the preview.  Any suggestions?

    Hi,
    Can you elaborate more about how did you re-create the project?
    I wanted to know whether you created a similar project from the beginning (New Blank Project) or copy/pasted the slides from one project to the other.
    It would be helpful, if you explain the steps you followed while re-creating the project.
    Thanks,
    Vikranth.

  • Downloaded icloud on my pc but not showing up in the system tray and not in the list of programs

    to sync with outlook i downloaded icloud on my pc but not showing up in the system tray and not in the list of programs

    Sorry, I forgot to clarify. This is in my itunes.

  • I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see t

    I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.

    If you only see the time then that would mean that you see an entry of the current day (today).
    History items from past days should have the date as well in the Most Recent Visit column.
    You should be able to see this changing if you open the last 7 days folder and scroll down.

  • Device Show in My Computer But Not Show in itunes

    My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>

    Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.

  • In solution manager system not showing all the system in SLD

    Dear Gurus,
    During the installation of solution manger sysyem i selected as a Central SLD as solution manager
    Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
    If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
    It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
    But if i login into solution manger not  able to see all the system in SLD.
    Regards

    Thanks for reply
    it is not showing all the systems

  • Why does Windows 7 not show up in System Preference's "Startup Disk"

    Why does Windows 7, installed via Boot Camp, show up when you hold down the option key when booting but the drive does not show up in System Preferences under the Startup Disk icon.
    As an aside Windows 7 runs perfectly on my MacBook.
    - Mike

    Now I found I'm not alone. My situation is similar but not exactly the same.
    I recently switched from the white MacBook to latest mac mini, tried installing XP Pro not successful for some reasons then tried Win7 (build 7000). On my old macbook this worked perfectly.
    Got win7 updated and picked win7 as startup disk in windows, used that for few days without going back to leopard. On just one occasion I booted with 'alt' key pressed (using a PC keyboard) I have choices of drives so I thought everything was fine. As soon as I booted into leopard I found no win7 partition in system>preference>startup disk, OMG I couldn't boot back to win7 since then. From that point onwards the 'alt' key didn't work for me. Every time only leopard can be booted.
    What can I do now?
    Why it was OK in macbook but didn't work on mini? Is it worth investing on a mac external keyboard just to get the 'option' key?

  • Incoming texts not showing on Bluetooth system

    My i-phone 5s  incoming messages are only randomly appearing via Bluetooth. Occasionally I receive one which displays in unread messages. When I move from unread to read it remains. Thereafter the text message disappears when I negotiate between unread/read. " No message using this filter " No historical record of any texts remain in the system Is there some incompatibility between Bluetooth and i-phone 5s set-up? My vehicle is a BMW F10. Thanks for help.

    I have now run the latest Bluetooth updates on the info system today. Still the same problems- texts either not appearing or disappearing after being opened up in unread messages but not showing in all texts. Also no sound notification for incoming messages.

  • Program is running, but not showing in dock?

    Sometime when i open a program, for instance, QuickTime. When i close the video, the program is still running but not showing in dock. When i display open applications by pressing cmd+alt+esc it i still running?
    Here's an expample. You can see that quick time is still running, but clearly not showing in the dock. (Sorry for Danish language on screenshot)

    I have this very same problem too.  In my case, it's specific to the Preview app only. At least, that's the only app that I've noticed.
    I've done all the proper troubleshooting and maintenance stuff but it still happens. Although I don't know what negative this causes my system, I'd be interested in finding out what is going on.
    My Mac is an iMac 27" (late 2013), 3TB Fusion, 10.9.1.
    Thanks,
    Marcus

  • HT5731 I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone.

    I have an iPhone 4S and when I sync it, the "purchased" and "recently added" playlists do not show up on my phone. For some reason I can't get all the playlists I have set up in iTunes to show up on my phone. 

    Hi HipstaTrinty,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Judy

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • Photo Uploaded in AD but not showing/visible in Lync 2010 client

    Photo Uploaded in AD but not showing/visible in Lync 2010 client
    bala

    Hi,
    Please also double check the size of the photograph in AD, make sure the size not overtake 48 pixels by 48 pixels, as it has a serious limitation on the size and resolution of the photos: the thumbnailPhoto attribute can only hold a photograph with
    a maximum size of 48 pixels by 48 pixels.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo.  At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

    In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

    HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
    i tried to sort it out  by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
    i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
    WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
    I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

  • Playing movie on tv; playing but not showing up; what output, DVD?

    1st time trying to play movie on tv; playing but not showing up; do I need to change output?  Only DVD & DVR shown. Thx

    You need to provide more information. How are you connecting your iPad to the TV. Are you using an Apple TV 2, a component AV cable, a composite AV cable or the digital AV cable?

Maybe you are looking for

  • Can we practice SAP EP on ECC 6.0..!

    Hi, Please guide me..! Actually I am learning SAP EP online from SAP. When I checked with my company for an IDES version of EP server. They are giving me the SAP ECC 6.0 IDES version details. Now I got confused that I was practicing my training sessi

  • How to create a column where each subsequent entry is added to the former?

    How does one create a column, inside Numbers, where each subsequent cell is added, in value, to the preceding cell above it? For example, a column could be labeled "credit card subtotals for the month." In the first cell, one might insert a dollar va

  • Xournal pdf exporting of lower quality

    I added some highlighting and text to the original pdf within the xournal. But the output quality of the original pdf changes (text with drawing), after exporting. Is there a way around. http://xournal.sourceforge.net/manual.html#printing states: "If

  • Call javascript function using parameters cause a immediate execute at load

    Hello. I recognized a strange behavior if I try to use parameters to javascript in af:clientListener method property. Using syntax <af:commandButton text="Init" id="cb1"    partialSubmit="true">    <af:clientListener method="OnInitControl1" type="cli

  • Share music on apple tv1 with a imac

    I have a music library in my apple tv1 and i would like to share it with an imac. Is that possible? If so, how do i do it?