Added New Hard Drive, LR4 Won't Write to it, even though selected in Import Dialog

I've just filled up my old hard drive so I have connected a new one and pointed the import, file handling preferences at it, the arrow is highlighting it there and it looks all good to go. But when I try and import LR says that I have no space on my old drive and I should free some space, it doesn't seem to register that I have a new drive and configured LR4 to point at it.
Any ideas?
Cheers for your help.
- First you can see the new drive selected
- Then below it pops up a dialog saying my old drive is out of space when I click Import (you can also here the new drive fire up just before the dialog pops up)

Great news!
I installed Partition Magic (which I already own), and noticed two things.
1. My Seagate 200GB is set as Active and
2. My WD Raptor is not set as Active
Sounds easy, so let's set my Raptor as active and my Seagate as not active. But hold on, let's do one at a time and since I want to make my Raptor work, let's turn that on first. So I made my Raptor Active and rebooted (btw, I didn't change anything in bios). Upon reboot into XP partion magic popped up and did some DOS stuff and rebooted me. This time when I rebooted I jumped into bios and changed 2nd boot device to SCSI instead of HDD-0 (1st boot is cd-rom) and rebooted. Now I get this message:
NTLDR is missing
What a kick in the sack! Previously, before I made the partition magic changes, booting from SCSI would give the error:
INVALID SYSTEM DISK
INSERT VALID SYSTEM DISK AND PRESS ENTER
or something like that. This drives me to the conclusion that you guys are on a role. Indeed setting my Raptor to Active was probably all it needed in the first place. Thank you very much already for that little piece of information.
So now the new question becomes, can I copy NTLDR from my xp cd into my WINDOWS directory and assume it will boot on SCSI? (or perhaps if I would remove my Seagate). I've tried to re-copy an NTLDR file for someone a year ago but there were many different versions of the file. I can still boot to XP if I set boot device to HDD-0, don't forget. And I did a windows search for NTLDR and it doesn't come up anywhere. Now what?
-Bob

Similar Messages

HT1338 my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore.

my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.

Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock

Adding new hard drive for Flash recovery area

i am adding new hard drive for flash recovery area. How i can make single directory on that flash recovery area & how i can test that i am accessing that rightly , to that directory & flash back recovery area disk?

Are you on Windows or Unix? And are you using ASM?
I'll assume you are on Windows....So after allocating the drive, you will format it say as F drive. Then you can create a directory T:\Flash. The parameter determining the location of the flash recovery area is db_recovery_file_dest. But you also need to set the size of the flash recovery area as well. After that's done. You can do your backups to Flash and see if the directory is populated.

New hard drive still won't be recognized!

Hello, recently I've been having several problems with my mid-2009 MacBook Pro; 2 minute beachballs and failure to startup. So I've purchased a new new WD Scorpio Black thinking it was a HD issue, but after replacing my old HD with the WD, Disk Utility wouldn't recognize the new drive. So I searched around and found out that Hard Drive Cable failure is an issue on this certain MacBook. So I ordered a new Hard Drive cable and just replaced that today, thinking that my new HD would be recognized. However after going into Disk Utility via the OS X Install DVD, my new Hard Drive was still not recognized. So I put back my old stock HD and it was recognized instantly and seems to not have any issues anymore. Could it be that the drive is DoA? Or should I purchase an external enclosure and format my new hard drive that way? I'd appreciate any other suggestions, thanks!

Try system preferences, utilities and open disk utilites, click on HD your disc (what ever you named it, or if you did not ,the 2nd disc id down is your disc) click disc repairs, if the reponse is this disc has problems click disc repair. If this doesn't work re-post and some one will walk you thru this .

HT4718 Installed new hard drive, click on restore from time machine, get to 'select a destination' but just keeps searching for disks.. any help please?

Installed new hard drive and want to restore from time machine.
Get as far as 'select a destination' then it goes no further - just keeps 'searching for disks'
Help anyone please?

1. Be sure your drive is attached and mounted.
2. If you have already written any data to the drive, back it up before proceeding to the next step.
3. In the Finder, choose Go > Utilities. The /Applications/Utilities folder will open.
4. Launch Disk Utility.
5. Click the icon for your external hard drive in the sidebar on the left.
6. Click the Erase tab along the top of the window.
7. From the Volume Format menu, choose Mac OS Extended (Journaled).
8. Enter a name for the external hard drive in the Name field.
9. Click the Erase button.
Make Sure that you choose the correct drive

External Hard Drive says there is not enough space even though it is empty!

Hi,
I have just backed up all my data with Chronosync. I then selected all and put it in my trash, so my external hard drive would have enough space for a backup. But when I try to use Time Machine it says that the external hard drive still has all the data even when I put it in the trash. I do not want to empty the trash before I backup using Time Machine, just in case something happens. How do I get my external hard drive to show it is empty to Time Machine, so I can use it?
Thanks
Tim

moving stuff to trash doesn't remove it from a drive. It puts it in a hidden .Trash folder on that drive. you have to empty trash to reclaim space. even easier would be to reformat the drive if you have a lot of stuff to erase.

Adding new hard drive to Mac Pro (quad core)

I've just ordered a new Mac Pro quad core (2.66 GHz) with one GB HD. Since Apple is charging £240 for a second drive I decided to get it from somewhere else. I found a 1GB Western Digital Caviar Green but I also noticed 1GB WD Caviar Black. I wonder if anybody has any experience of those drives and would they work with the latest Mac Pro ?
Does anybody knows what make of drive is Apple using in their latest Mac Pros ?
Tom

*WD Caviar Black 640GB*
HD Tune: WDC WD6401AALS-00L3B2 Benchmark
Transfer Rate Minimum : 59.1 MB/sec
Transfer Rate Maximum : 118.1 MB/sec
Transfer Rate Average : 96.4 MB/sec
Access Time : 11.8 ms
Burst Rate : 125.3 MB/sec
*Black Caviar 1TB:*
HD Tune: WDC WD1001FALS-00J7B Benchmark
Transfer Rate Minimum : 53.9 MB/sec
Transfer Rate Maximum : 108.7 MB/sec
Transfer Rate Average : 86.1 MB/sec
Access Time : 12.9 ms
Burst Rate : 111.5 MB/sec
+(note the slower average to the smaller 640GB model)+
*Green Power 1TB*
HD Tune: WDC WD10EADS-00L5B1 Benchmark
12-23-2008
Transfer Rate Minimum : 41.6 MB/sec
Transfer Rate Maximum : 95.6 MB/sec
Transfer Rate Average : 74.3 MB/sec
Access Time : 14.0 ms
Burst Rate : 117.2 MB/sec
*WD Caviar Blue 640GB*
HD Tune: WDC WD6400AAKS-00A7B Benchmark
Transfer Rate Minimum : 55.6 MB/sec
Transfer Rate Maximum : 113.3 MB/sec
Transfer Rate Average : 90.2 MB/sec
Access Time : 11.8 ms
Burst Rate : 112.9 MB/sec
the 32MB cache did not make a real or noticeable difference in benchmarks
http://www.barefeats.com/hard112.html

New Hard Drive still have Question Mark Folder

So I first got the 'Question Mark Folder' and had to keep running Safe Boot Mode to use computer. Finally got around to replacing the Hard Drive, but this Question Mark Folder still comes up trying to turn the computer on and now trying to setup the new hard drive. Won't let me do anything. I've tried all of the button combos/recovery mode/etc. Tried inserting both a backup disk of Mavericks and Snow Leopard, nothing. Is there any other problems that could cause this? Maybe a dead SATA cable? or something else small hopefully?

My newest Mac just did the same "folder of death" dance. It's too late for you now, but you might consider a passport backup drive.You can get 2&3 T-bytes now fairly reasonably priced. A given with computers is they will crash, just a question of how bad and when, so you can be prepared for the next time.

How can I reinstall Mountain Lion on new hard drive?

I've had to install a new hard drive as old one was failing.
Have loaded Snow Leopard from disc onto the new drive but can't install Mountain Lion which I was running prior to drive failure; very frustrated.
Have tried several options.
1. Tried to reboot from OS X Utilities but whenever I restart, holding the cmd + R keys, I can only ever get the standard screen. I've tried pressing keys early in restart, later in restart, keys on either side of the keyboard, cmd + alt/option + R but still can't get to the OS X Utilities.
2. Having given up on 1 I've tried to download ML from my purchase history in iTunes. I can see the purchase recorded but there appears to be no way to get to a reload option - at least not in the iTunes loaded from Snow Leopard
3. I tried downloading ML updates, hoping that might allow me to bypass 1 and 2. The download wasn't recognised by my machine.
4. I've be willing to just buy the **** OS again from scratch but iTunes won't allow me to do that either, at least not using my current Apple ID.
Does anyone have any bright ideas? I hate bloody computers.
Mike

enigmatix wrote:
Csound,
Do you have any suggestions why I can't open OS X Utilities.
Thanks,
Mike
How old is your Mac, if it came with 10.6 installed it is too old to have Internet Recovery (command-option-R) And as it has a new hard drive you won't be able to use Recovery (command-R) either until a new copy of Mountain Lion is installed and ceates a recovery partition on the drive.

Process for new hard drive

Hi everyone,
I was hoping somebody could point me to some tutorials for upgrading the hard drive in my PowerBook G4 (1Ghz).
I own an external drive (usb only) that is the same size as the drive in my PB (80gb), this is what I'd use to back up my hard drive (I could borrow a larger drive from work if necessary).
What is the best process for backing up? Should I use Carbon Copy? I already have Retrospect Express.
How can I make sure that I won't need to reinstall all my 3rd party apps (ex; iLife, Photoshop)? Would all of this be ported over when I copy my old hard drive over to the new hard drive?
What is the best process for copying the backed up/copied hard drive to the new hard drive? Won't I need to reinstall Tiger first? Then run updates?
Thanks for the help!

"What is the best process for backing up? Should I use Carbon Copy? I already have Retrospect Express."
I just replaced my drive, I used SuperDuper, it worked flawlessly, a major first for me since using OS X. I swear I'm not from that company, but it made a perfect bootable disk, important since I was swapping drives directly after copying data via USB to external enclosure. Had drive duplication problems prior, carbon copy was a no-go for me, to complicated, something not right w/ the updates, i forget what, it has been a while, just remember I was forced to reinstall apps.
Should have gotten a firewire enclosure, could have tested it first w/ target mode, oh well.

Apple put in a new hard drive, but not the computer is VERY LOUD!

I just got my 13 month old Intel iMac back from the Apple store -- it needed a new hard drive. When I first turned on the computer, it was very loud, and I thought they gave me someone else's computer by mistake, so I checked the Serial Number, and apparently it's my computer.
I can't take this noise. What's going on? The fan wasn't broken, but this sounds like a new fan in the computer that is much louder than the old fan.
Also, the Apple geniuses told me the computer would use Time Machine to install all my old settings (I have an external hard drive hooked up to the iMac). But it's not working at all. Whenever I tell the new hard drive to "Restore to a Time Machine Backup" and select the backup hard drive, the computer screen goes gray, and it starts all over again (with the "Hello" screen in all the different languages.
Please help. I guess the MIP issue is the noise -- I can't work with a computer this loud. It gives me a headache. Should I just take it back to the Apple store, and have the noise fixed first? There never was a noise problem before I took the computer in for the broken hard drive.
Thanks.

HI,
Try resetting the SMC. http://support.apple.com/kb/HT1543
If that doesn't help, take it back.
Tip... whenever you take a computer in for service and you pick it up, make sure it's running without problems *before you leave*. Especially in this case where you got it home and now have this noise issue.
Carolyn

My computer recently had a new hard drive installed. Now the music I have added to itunes won't sync over to my ipod

My computer recently had a new hard drive installed. Now the music that I have added to itunes won't sync over to my ipod. I have the selections checked, but still no luck.

See Recover your iTunes library from your iPod or iOS device.
tt2

Why won't my edited RAW images show after a LR re-install onto a new Hard Drive?

Hi there. Recently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed, thankfully. Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. Please tell me that all of my last 2 years of editing photos are still with the RAW files?!!!
I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6.
I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
Please be kind in your replies...I appreciate any help/guidance I can get on this. Plus the photos I need are for Seniors graduating in a few months here so you can imagine the panic mode is just a bit higher than normal. Many thanks.

The default location for the backups created by Lightroom on exit is in the same folder as the catalog itself (i.e. that would be on the same faulty drive). It is, however, possible to redirect those backups to a different destination, such as a different hard drive.....but only you know if you did that or not. Do you have any other backups, e.g. drive level backups?
Just to be clear, if you are importing afresh into a new catalog from Raw files that do have XMP sidecar files, you should see the final edited state from the previous catalog, but you won't see the individual history steps that got you there (as that's one of the things that are not included when you write XMP data from within Lightroom). If there is no XMP sidecar, you'll just get the original OOC image.

Had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete. can this be repaired without going to the repair shop?

had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete". can this be repaired without going to the repair shop?

What installed iPhoto there in the first place? Was it the same version of iPhoto that came with the Mac? Was iLife added at a later time from a Mac Box Set? You can selectively install iPhoto, and then apply the appropriate iLife update without taking it to the shop, after removing the application, or recover it from your backup.

ITunes won't let me move files to new hard drive

Hey, all...I'm having a really major problem with my computer. I'm trying to move my iTunes library to a new hard drive. Currently, it's in a 1-terabyte Western Digital USB drive powered through the USB, and I'm trying to move it to a Seagate 1-terabyte drive. I currently have 535 gigabytes of media in my library and I have a MacBook with a 250-GB hard drive that I don't store any music on currently.
I move the library file over to the new USB hard drive, and I consolidate my library as it asks me to do. Then, when I go down to "Organize library", it prepares to copy the files to the new disk, then gives me the big red stop sign and tells me "The disk cannot be read from or written to." and that's that. The files work fine when I try to play them, so they're there, and presumably, not irretrievably damaged. They're just impossible to move.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

Added New Hard Drive, LR4 Won't Write to it, even though selected in Import Dialog

Similar Messages

Maybe you are looking for