Added SSD but now it freezes regularly

Hi,
I've added the SSD and moved the HDD to the optical bay.  All appears to have gone well, it is definitely quick, but it freezes pretty regularly.  I did it this afternoon and it has frozen about 6 times,each time requiring a reboot.
The approach I took was to lone the HDD to the SSD after installing and as I say, it seems to have worked other than the freezing.
Anyone experienced this?
Thanks,
Peter

- First reset the iPod:
Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If still problem,  connect the iPod to your computer. If iTunes sees the iPod restore the iPod via iTunes.
- If iPod not shown in iTunes, see if placing the iPod in recovery mode will allow it to show in iTunes so you can restore the iPod.  For recovery mode see:
iPhone and iPod touch: Unable to update or restore
If it still cylce one and off, disconnect the iPod and let the battery fully drain. Then charge and try again.

Similar Messages

  • Time Machine backs up 256G SSD but now skips the internal 1TB ATA

    Hi,
    Time Machine has been working flawlessly for over a year. But now something strange is happening. TM reflects changes on my 256G SSD internal drive but not my internal 1TB ATA drive. I have an iMac i7 2011. I have an external 2TB WD drive that I backup to and it's nowhere near at capacity. My 1TB ATA, under TM, shows me a state that's a few weeks old and no changes I make are backed up, even when I perform a manual backup.
    I've checked the console log. There's nothing out of the ordinary:
    28/05/12 8:29:18 PM
    com.apple.backupd[2535]
    Starting standard backup
    28/05/12 8:29:18 PM
    com.apple.backupd[2535]
    Backing up to: /Volumes/My Book/Backups.backupdb
    28/05/12 8:29:19 PM
    com.apple.backupd[2535]
    No pre-backup thinning needed: 835.7 MB requested (including padding), 1.62 TB available
    28/05/12 8:29:23 PM
    com.apple.backupd[2535]
    Copied 383 files (75 KB) from volume iMac-HD-SSD-256GB.
    28/05/12 8:29:24 PM
    com.apple.backupd[2535]
    Copied 388 files (75 KB) from volume iMac-HD-ATA-1TB.
    28/05/12 8:29:25 PM
    com.apple.backupd[2535]
    Starting post-backup thinning
    28/05/12 8:29:25 PM
    com.apple.backupd[2535]
    No post-back up thinning needed: no expired backups exist
    28/05/12 8:29:25 PM
    com.apple.backupd[2535]
    Backup completed successfully.
    I'm about to give up on TM.
    Thanks,
    Vanessa

    Forgive me, but how do you know it's not backing it up? 
    The log you posted shows data copied from both iMac-HD-SSD-256GB and  iMac-HD-ATA-1TB.  Those are the SSD and HD, aren't they?
    (There is an occasional bug in the logs, where TM erroneously reports the same amount of data backed-up from each volume.)
    Try this:   open a Finder window to your Computer (or press Shift+Cmd+C), then Enter Time Machine.  Don't select anything on the Finder windows in the browser yet, but click one of the backups in the TimeLine on the right.  That should show a folder representing each volume that was backed-up, sort of like this:
    Click the volume in the sidebar (or the icon in the center) to see the backups of that volume.

  • HT3880 I can't share photos via message on my i-phone 5 - I did a few times but now it freezes... help!

    I am new to my I-phone 5 and was happy to be able to share a picutre on message to my husband when out with the kids.  Now when I hit this option, it doesn't share on message and it freezes forcing me to shut down my message sending back to the main screen.  This function was working just last week - why not now?  What can I do?  It is sharing well on email, facebook etc... just not on message.  I am getting images from others this way but can't send mine out.  Please help!

    Try a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.

  • I just got an iPod touch, it was fine with battery life before I added Apps but now the battery doesn't last more than a night, what should I do?

    I just got an ipod touch from my sister yesterday which she has had since October. The battery life went for days with her but as soon as I started checking my email and adding apps the battery doesn't last more than a couple of hours. I deleted some apps but no change. I also kept my email logged in and my notifications turned on so I'm wondering if they are part of the problem. Please let me know what I should do. Thank you so much.

    Yes, notifications are part of the problem.  For more information look at at the previous posts on this problem.  Yu can find some of those on the right hand side of this page under the heading: More Like This.  I keep mine in airplane mode when asleep.

  • Upgraded to 7.7 but now itunes freezes when I connect my iphone

    why does my itunes freeze when I connect my iphone to my computer? My iphone still charges when i connect it so my computer does read it but not itunes.

    The following troubleshooting document may be worth a try:
    iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows XP and Vista

  • I just added memory but now my MACPRO is NOISEY!!! IS THIS NORMAL??Help!

    I recently added 4GB(2x2gb) of memory to my previous 2GB(4x512mb) MacPro, so now it is 6GB. After installation everything seemed fine, except now it is noisier than ever, at first restart it was incredibly loud and seemed like the fan was going into overdrive, it went quieter, and now its just noisier than it was before! i dont know if this is normal or if it is hurting my machine! The following is about my computer maybe something is wrong here...
    Model Name: Mac Pro
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 6 GB
    Bus Speed: 1.33 GHz
    If everything looks OK, i would appreciate if someone was able to tell me how I could maybe decrrease this noise! Thanks!

    FYI, from page 32 of the Mac Pro User Guide:
    Important: Apple recommends that you use Apple-approved FB-DIMMS. Non
    Apple-approved FB-DIMMS may cause your Mac Pro to operate louder or decrease
    performance to conserve heat. DIMMs from older Mac computers cannot be used in
    your Mac Pro.
    I ordered a Mac Pro on Saturday. I like to read the documentation prior to receiving something new. Because, once I get it I want to start playing with i immediately.
    BTW, I ordered a 4GB RAM, 2x2GB, upgrade from Crucial. I used Crucial's memory advisor to pick the RAM. I hope I made the right choice.
    Enjoy life,
    Steven
    Message was edited by: Steven Whatley

  • I reset my whole ipod touch but now it freezes when it tries to upload the home screen

    please help! idk what i did

    - First reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - If still problem,  connect the iPod to your computer. If iTunes sees the iPod restore the iPod via iTunes.
    - If iPod not shown in iTunes, see if placing the iPod in recovery mode will allow it to show in iTunes so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    If it still cylce one and off, disconnect the iPod and let the battery fully drain. Then charge and try again.

  • Acrobat XI Has Updated but Now Freezes

    My windows 8 version of Creative Cloud subscription has updated Acrobat to XI but now it freezes upon entry and does not respond to any mouse click, even to close the file

    Hey Corpecon!
    Does Acrobat freezes immediately after launch or when you use some specific tool or something?
    Do you get any specific error message?
    Regards,
    Rahul

  • HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • Firefox keeps crashing when I try to launch it. I uninstalled the program, but now when I try to download it from your website the download freezes with 1 second left. This has happened several times.

    firefox keeps crashing when I try to launch it. I uninstalled the program, but now when I try to download it from your website the download freezes with 1 second left. This has happened several times.

    Hello Deb,
      Something fishy going on with those particular files. But without looking at them directly I couldn't say what. Usually in a case like this the problem is some of the metadata that is attached to the file. Where did these files come from? A camera, a scanner, the internet?
      An explanation about the Watched Folder function: It looks for changes to a folder, not just automatically grabbing whatever files are in it. Generally, you want to select an empty folder as a Watch Folder. Once this has been set up, as you add files to this folder they will be imported into the Organizer. If you start with a folder full of images, those will be ignored, any new items will be added.
    -Brett

  • HT1296 My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again?

    My drive failed on my iMac and I had to get a new drive but now my iTunes music is gone including all the CD's I added to iTunes, and all of my custom Playlists. All of that stuff is still on my iPhone 4, but how do I get it all onto my iMac again? I have CD's on my phone that i no longer have the physical copies of so i can't just re-download them all, plus it would take forever! I just want to know if there is a way to get all of what is still on my phone, back over to my iMac with it's new drive and restore my full iTunes library to the iMac with playlists, CD downloaded music, and my iTunes bought stuff, so i can go back to synching the 2 devices without losing everything that's on my phone that used to be on both devices?

    iTunes Store- Transferring purchases from iOS device or iPod to a computer
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    How to dowload purchased music

  • My new iPad is synced with iTunes but now it won't recognize my iPod nano. How do I get it to recognize both? iTunes synced with my Nano just fine until I added the iPad.

    My new iPad is synced with iTunes but now it won't recognize my iPod nano. How do I get it to recognize both? iTunes synced with my Nano just fine until I added the iPad.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I accidentally added the app store apple id wrong, then I was able to put the right one but now that I need to update the application tells me to insert the id of the psw wrong, how do I change it?

    I accidentally added the app store apple id wrong, then I was able to put the right one but now that I need to update the application tells me to insert the id of the psw wrong, how do I change it?

    You must update the apps with the Apple ID that they are purchased with.
    The only way to get round this is to re-purchase the app with the new Apple ID.

  • I added a custom ringtone . Then later I tried to add another three set  but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

    I added a custom ringtone . Then later I tried to add another three set  but now after sync . Am not able to get rid of the first one... It's still there as my custom ringtone. But my iPhone in iTunes shows all four... But the phone shows only one...?

    Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

  • I added some songs to my itunes but now my itunes won't play the songs - it says it can't locate the song although the Itunes match is turned on and it says all of my songs are in the cloud - anyone have any thoughts

    i added some songs to my itunes but now my itunes won't play the songs - it says it can't locate the song although the Itunes match is turned on and it says all of my songs are in the cloud - anyone have any thoughts

    Did you delete the hard copy of the songs from your computer after you uploaded them?
    If so just highlight the said songs and delete but do not check the box that says delete from iCloud and your songs should play fine. 
    This happens when the original file is moved from the location that itunes was looking for it at and if you did this because you uploaded it then it will still be in the cloud you just need itunes to read from cloud and not think it's supposed to be finding the original file

Maybe you are looking for

  • Where can i download an older version of itunes?

    Am not impressed with the new itunes version taking away the ability to back-up music library to disc (backing up whole library that is, not just playlists) and so i am looking for somewhere i can download the older version 10.1.1 from.  Ideas anyone

  • InDesign JPG Compression vs Illustrator/Photoshop

    I am working on a website and need to put in a lot of images. For most images, I use photoshop. I create the correct size then export using "Save As for Web & Devices." This works great, but I need to display several small images in a grid format. Wh

  • BW Bex Report Error.

    Hi all. I create a report iin Bex Query designer. When the final user execute the report occurs the error: Embedded image moved to file: pic08833.jpg I have the company icon in my reports. I think that this is the problem. Some one can help-me? Regar

  • Transferring data using migrant assistant

    I have a white macbook with snow leopard, i have purchased a new aluminum macbook with leopard. upgraded the new one to snow leopard and now want to transfer files (music,photos,settings,apps etc) from mac to mac. I was using migrant assistant, after

  • Audio setting and dial -norm

    OK, Have problem. I set the dial norm to -31 for a 2 channel AC-3 project. When I play the track in DVDSP, the level is too low. At least 6 db lower than the track in Final Cut. the menu music is also too low. Past experience has been leaving the def